Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | l1₹32.2 LAccepted-AOC | l1 | Accepted-AOC TENDER FOUND LOWEST AND REASONABLE HENCE ACCEPTED | |
| 2 | L2₹32.7 L+₹32,188 (0.99%)Rejected-AOC SECUNDERABAD | WARANGAL | TELANGANA | 506350 | L2 | Rejected-AOC NOT LOWEST | |
| 3 | L3₹34.2 L+₹1.8 L (5.43%)Rejected-AOC | L3 | Rejected-AOC NOT LOWEST | |
| 4 | L4₹34.8 L+₹2.4 L (7.29%)Rejected-AOC 1 16 70 SAI NAGAR COLONY ALWAL SECUNDERABAD 500 015 | SECUNDERABAD | HYDERABAD | TELANGANA | 500015 | L4 | Rejected-AOC NOT LOWEST | |
| 5 | L5₹35.6 L+₹3.1 L (9.64%)Rejected-AOC | L5 | Rejected-AOC NOT LOWEST |
Tender Value
₹45.8 L
EMD Value
₹92,000
Closing Date
9 Oct 2024, 6:00 pmClosed
SHRI MASUD ALI, IDSE
GARRISON ENGINEER (SOUTH), MUDFORT, SECUNDERABAD PIN - 500003
ADDN / ALTN TO GALANIZED SHEET IN LIEU OF ASBESTOS SHEET AND SPL REPAIRS TO ROOF TREATMENT OF BLDG NO J 99 OF 454 FD HOSPITAL AND PROVN OF OPEN DRAIN AT BLDG NO P 27 TO P 33 AT MAP LINES UNDER AGE B/R (SOUTH) NO I / AGE E/M (SOUTH) OF GE (S) SECBAD
2024_MES_673810_1
GE(S)/SEC/TOKEN-58 OF 2024-25
Open Tender
Civil Works
Item Rate
180 days
SECUNDERABAD
For Enlisted contractors class D and above category a (i) and b (i) and for unenlisted contractors meeting the eligibility criteria of above class and category for along eligible class with EMD
6 documents required · 6 mandatory
₹500
GARRISON ENGINEER (SOUTH), MUDFORT, SECUNDERABAD-3
₹92,000
Yes
29 Nov 2024
11 Sept 2024
17 Oct 2024
11 Sept 2024
9 Oct 2024
26 Sept 2024
11 Sept 2024 - 25 Sept 2024
Amount
Dismantling floor, hearth or wall tiling including CM bedding, removing rubbish off the premises complete all as specified and as directed
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified and as directed
M&L for glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:3) complete all as specified and as directed
Taking down chowkats or frames with shutters n exc 1.5 sqm each of any description and making good the same damage portion (without taking off shutters from the frame) complete all as specified and as directed
S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification complete all as specified and as directed
S & F for Factory made solid PVC molded with particle board core door shutter 28 to 30 mm thick panel design with 2mm thick molded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing complete all as specified and as directed
S & F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed
S&F of Aluminium anodised,barrel tower bolts of extruded section of size 150mm long etc complete all as specified and as directed
S&F of Aluminium handles, cast type, anodised of size 150 mm long etc complete all as specified and as directed
S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and as directed
S & F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed
Dismantling of cast iron/PVC pipe any dia and any shape incl bends/branch pieces jointed in cement mortar and taking out if reqd complete all as specified and as directed
S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and as directed
S&F for 110mm dia PVC (SWR) bends with acess door any radius complete all as specified and as directed
S&F for 110mm dia PVC (SWR) bends any radius complete all as specified and as directed
S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and as directed
S&F for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and as directed
S&F for 75 mm dia PVC (SWR) grade bends of any radius complete all as specified and as directed
S&F for 75 mm dia PVC (SWR) grade bends with acess door of any radius complete all as specified and as directed
S&F PVC (SWR) vent cowl, 75mm dia complete all as specified and as directed
M&L PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified and as directed
S&F in repairs vitreous china ware wash hand basin white flaye back of size 550x 400 mm with peatestal including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, and all necessary inlet, out let connections complete all as specified and as directed
S&F in repairs 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts complete all as specified and as directed
S&F in repairs for bib taps long body with flange cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for Iron pipe or for brass fancy for CP brass fancy type 15mm dia complete all as specified and as directed
S&F in repairs two way bib cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup complete all as specified and as directed
S&F in repairs vitreous china ware wash down white water closet pan (pedestal pattern with trap incl connecting to drain and flushing pipe, antisyphonage pipe incl PVC sheet cover etc complete all as specified and as directed
S&F in repairs vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)
S&F in repair of Vitreous China Urinal, Half stall type, white including chromium plated urinal spreader, and waste pipe with grating and union for discharge pipe complete all as specified and as directedand directed.
S&F in repair PVC valveless syphonic action type flushing cistern 10 ltr capacity white with intel ball valve float flush pipe and handled including brackets complete all as specified and as directed
S&F in repair of Chromium plated tubular towel rail 20mm dia 600mm long fixed with suitable steel screw etc complete all as specified and as directed
S & F in repairs Brass chromium plated towel ring with round flange complete all as specified and as directed
S&Fin repairs Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. (Make:- Jaguar/ Prayag /Hindware)
S&F in repairs PVC connection 15 mm dia and 600 mm long with both and nuts complete all as specified and as directed
S&F in repairs angular stop cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup complete all as specified and as directed
Taking up or down 20mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and as directed
Taking up or down 25mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and as directed
S& F for 20mm bore CPVC pipe outer dia of pressure ratings 11 SDR-II including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and as directed
S& F for 25mm bore CPVC pipe outer dia of pressure ratings 11 SDR-II including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and as directed
S&F in repairs for providing 25mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes
Cutting chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed
M & L in repair for high density pipe 40 mm dia (HDPE) pressure rating 6 Kg / Sqcm fixed to wall and floors etc complete all as specified and as directed.
Dismantling Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings. complete all as specified and as directed
S&F for pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an coloure having tensile strength of 550Mpa as in roof covering fixed with self tapping screws complete all as specified and as directed
S&F for pre painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an coloure having tensile strength of 550Mpa as in roof covering, ridge, eves gutters etc fixed with self tapping screws complete all as specified and as directed
Dismantling structural steel work complete all as specified and as directed
M&L for rolled section as in main and cross beam, hip and jack rafter,purline where connected to common rafters and running rails and guides for sliding doors fixed witg angle cleats or other connecting plates of grade Fe-410 (grde E-165) complete all as specified and as directed
M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed
M&L for preparation of old steel surfaces over 10 cm in width or girth not otherwise described and applying one coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed
Taking down cement plaster on brick /stone masonry / concrete surfaces of wall / ceiling incl raking out joints, hacking for key, scrubbing down with water etc and deposited the debris outside the MD land complete all as specified and as directed
M&L for rendering in two layer i.e.5mm thick in CM 1:4 including with or without mixing water proofing compound over 10mm thick in CM (1:6) on concrete/block masonry surfaces and finished even and smooth without using extra cement on complete all as specified and as directed .(Note WPC shall be measured and paid separately)
M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) complete all as specified and as directed
M&L for preparing new plastered or unplastered surfaces on walls including cornices and applying two coats of Oil bound distemper over a coat of primer complete all as specified and as directed .
M&L for preparation on newly plastered wall surface and applying two coats of cement base paint complete all as specified and as directed
M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in cooping in complete all as specified and as directed
M & L for preparing old srfaces plastered or unplastered surfaces of walls including cornices and applying one coat of distemper oil emulsion including filling cracks/ undulated surfaces with wall care putty wherever requiredcomplete all as specified and as directed
M&L for preparation old plastered or unplastered surfaces on walls/ceiling including cornices and applying one coat of cement based paint complete all as specified and as directed
Excavation over areas n.exc. 1.5m deep and getting out in hard /dense soil complete all as specified and as directed
Excavation in trenches n.exc. 1.5m wide and n.exc. 1.5m in depth for taking up/laying sewer lines and getting out in hard and dense soil complete all as specified and as directed
All as per item No. 2 above but exc. 1.5m and n.exc. 3.0m deep complete all as specified and as directed
Returning, filling in soil including spreading, levelling, watering and well ramming in layers n.exc. 25cm complete all as specified and as directed
Removing of excavated soil to a distance n.exc 50m and depositing where directed at alevel n.exc 1.5m above starting point complete all as specified and as directed
M&L PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed& directed
Formwork to soffits of suspended slabs such as roof labs, floor slabs, landings and similar work; not exceeding 200mm thick for flat surface complete all as specified and as directed
M&L for RCC (design mix M-30 using 20mm graded aggregate) as in slab supported on wall, beams and columns in floors roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed
Demolition of RCC cover slab for manholes etc complete all as specified and as directed
M&L for pre-cast reinforcement cement concrete (1:2:4) Type B-1, using 20 mm graded stone aggregate as in cover slab for manholes etc.and set in cm 1:6 complete all as specified and as directed
S & F mild steel TMT bars 6mm to 8 mm dia cut to length bent to shape required including cranking bending etc TMT bars complete all as specified and as directed
S&F TMT bars 10 mm dia and over and cut to length bent to shape required including cranking, bending, hooking ends and bending with MS wire not less than 0.9mm dia or securing with clips quality conforming complete all as specified and as directed
S & F 300 mm dia bore hole reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and as directed
Demolition of Bricks or stone masonry built in cement mortar complete all as specified and as directed
M&L for walling of squared rubble masonary (Secunderabad type) , recangular coursed, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and as directed
M&L for Pre-cast cement concrete block masonry with solid blocks type C1 (1:3:6) (20mm graded crushed stone aggregate) set in CM 1:6, exc. 10 cm in width and setting in mortar, complete all as specified and as directed
M&L Rendering 15mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces even and smooth without using extra cement as in manholes, septic tank, filter bed out let drain by using water proofing compound etc complete all as specified and as directed
Supply of Integral waterproofing compound complete all as specified and as directed
M&L for Plain cement concrete type C1(1:3:6) ( using 20mm graded crushed stone aggregate) as in surface chanels and drains complete all as specified and as directed
M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and as directed
Demolition of cement concrete (un-reinforced ) in ground floors and pavings not exceeding 15cm thick(below or above ground level ) .
M&L for 75 mm thick plain cement concrete type D-2 (1:4:8) (40 mm graded crushed stone aggregates) as in sub base complete all as specified and as directedand directed.
M&L for 75mm thick plain cement concrete in (1:3:6) type C1 using 20 mm graded crushed stone aggregate as in plinth protection finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed
M&L for 150mm thick PCC 1:2:4 (using 20m graded crushed stone aggregate) as in paving/hardstanding complete all as specified and as directed
S&F for glossy finished heavy duty chequered cement concrete tiles 30cmx30cmx25mm thick set jointed with grey cement and pigment and pointed in neat cement slurry including 20 mm thick screed bed of CM(1:6) in floors complete all as specified and as directed
M&L for Salt Glazed Stoneware pipes grade 'A',100mm bore,laid in trenches and jointed complete all as specified and as directed
M&L for PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) for bed to drain pipe 100mm bore including packing under and haunching against the sides of pipes after they are laid and tested all as specified and directed.
Cleaning of chocked sewer line of any description by rodding with green bamboo stick/cane stick and flushing with water for 200mm dia size of pipe complete all as specified and as directed
Cleaning of chocked sewer line of any description by rodding with green bamboo stick/cane stick and flushing with waterfor 150mm dia size of pipe complete all as specified and as directed
Demolition of cement concrete of any desciption any thickness and in any postion not otherwise specifically provided for including removal of old treatment of any desciption complete all as specified and as directed
M&L for PCC 1:2:4 type B1 using 200 mm graged crushed stone aggregate as in padding concrete (level course) on roof surface averaging 40mm thick etc complete all as specified and as directed
M& L for rendering 10mm thick in 1:3 mixed with integral water proofing compound @ 3% of total weight of cement as per manufacture's instruction as in roof and chajjas, finished the sufaces fair an even complete all aspecified and as directed (Note: separetely under relevant item of water proofing compund will be measured )
M&L for PCC 1:2:4 type B1 using 20mm grage crushed stone aggregate as in base of water tank on roof surface complete all as specifed and as directed
M & L for cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specifed and as directed
M & L for priming plastered roof surfaces with a coat of industrual bitumen 85/25 at the rate of 1.2 kgs per sqm . APP base polymeric membrane minimum weighing 3 kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight no less than 150 gms/Sqm) land on primer surface by forced application complete all as specifed and as directed
M & L for applying one coat of aluminium paint @ 0.30 Ltr /Sqm including cleaning of surfaces complete all as specified and as directed
M& L PCC 1:2:4 usnig B0 ( using 12.50 mm graded crushed stone aggregate) for coping, corner of roof and similar work complete all as specified and as directed
M& L for uploading of wild trees such as grass / bushed etc from the roof / wall surface/AC sheets /soil pipes surrounding including its penetrated roots with suitable cleaning chemical and making good to the damed plaster by providing CM 1:3 and finish the surfaces to match with the existing surface complete all as spedified and as directed
Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and seperating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed
Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed
M & L for Point wiring with 1.5 Sq mm copper conductor single core FRLS PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC conduit surface / conclead and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 1.6 mm thick MS of suitable size duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with suitable 2.8 mm thick ISI marked hylem sheet for fixing switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor FRLS PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed (a) One light point controlled by one, one way switch 5 Amps, SP complete all as specified and as directed
(b) One exhaust fan point controlled by one, one way switch, SP, 5 Amp complete all as specified and as directed
S & F Switch piano single pole one way flush type 5 Amps capacity 230 volts, complete all as specified and as directed
S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and as directed
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
S & F LED light fitting 1x12W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed
Supply and fix exhaust fan of size 225mm wall mounted including making suitable hole to the wall and making all the disturbed surfaces smooth complete all as specified and as directed Make:Bajaj Model:Bahar Fresh or equivalent in Havells/Cromption.
S & F sheet metal enclosure Double door MCB DB SPN 4 way with suitable amps rated bus bar 240 volts double door with magnetic locking system complete all as specified and as directed
S & F sheet metal enclosure Double door MCB DB SPN 8 way with suitable amps rated bus bar 240 volts double door with magnetic locking system complete all as specified and as directed
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning of capacity 32 Amps complete all as specified and as directed
S & F MCB SP 5 to 32 Amps 240 volts for fixing on MCB DB's complete all as specified and as directed
Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1:3:6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plar No.3 of SSR Part I, 2009 complete all as specified and as directed
S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen?ded by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circular of size 6 Sqmm complete all as specified and as directed
SAI RUPA CONSTRUCTIONS (BID ID -3122208)
BEEGEE DESIGN SYSTEMS (BID ID -3132101)
ATUL ENTERPRISES (BID ID -3116244)
RAGHAVENDRA CONSTRUCTIONS (BID ID -3124663)
M/S C MALLIAH & SONS (BID ID -3131895)
GUTHIKONDA BROTHERS (BID ID -3125632)
K LAKSHMAN SINGH AND CO (BID ID -3133671)
harshraj and co (BID ID -3132925)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .