Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹77.3 LAccepted-AOC 252 GREEN CITY II BARNALA BYPASS ROAD BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | L1 | Accepted-AOC SINCE LOWEST BIDDER | |
| 2 | L2₹78.7 L+₹1.1 L (1.41%)Rejected-Finance 417 LANE NO 3 NEAR GUMTALA BYE PASS DEFENCE ENCLAVE AMRITSAR PIN 143001 PUNJAB | AMRITSAR | AMRITSAR | PUNJAB | 143001 | L2 | Rejected-Finance SINCE NOT L1 BIDDER | |
| 3 | L3₹81.5 L+₹3.9 L (4.97%)Rejected-Finance | L3 | Rejected-Finance SINCE NOT L1 BIDDER | |
| 4 | L4₹96.5 L+₹18.9 L (24.4%)Rejected-Finance | L4 | Rejected-Finance SINCE NOT L1 BIDDER | |
| 5 | Rejected-Technical | - | Rejected-Technical Not recommended for opening of financial bid. Since firm is marked as No in the WLR of HQ CEWC Dec 2022 |
Tender Value
₹95 L
EMD Value
₹1.7 L
Closing Date
20 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AMRITSAR CANTT
HQ CWE ASR CANTT
CERTAIN REPAIRS TO ROAD AT AMN DUMP VALLAH, GG FORT AND OLD AMRITSAR CANTT UNDER GE ASR
2022_MES_569543_2
CWE/ASR-67/2022-23
Open Tender
Civil Works
Item Rate
90 days
GE ASR
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹1,000
GE AMRITSAR
₹1.7 L
Yes
4 May 2023
1 Mar 2023
27 Mar 2023
1 Mar 2023
20 Mar 2023
8 Mar 2023
Amount
M&L for preparing of black top surfaces by brushing with wire brushes for removing caces mud etc. Sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified and directed.
M&L for applying evenly a priming / tack coat of paving bitumen at the rate of 10 kg per 10 sqm of road surface complete all as specified and directed.
Material and labour for premixed bituminous macadam laid, rolled with 8 to 10 tonne power road roller and compacted to required gradient and camber, (consolidated thickness upto 75mm or less) using paving bitumen any penetration @ 4% of weight of road metal, grading-2 (63mm to 40mm) in existing sunken portion of the road surface including sweeping from dust or mud or water, scoring sunken surfaces in road etc cutting edges complete all as specified and directed.
Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags/air compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer @ 5 kg per 10 Sqm and laying bituminous Premixed semi dense asphaltic concrete 30 mm thick using bituminous (minimum consolidated thickness) with 5.5% binder content by weight of total mix, rolled and compacted with 8 to 10 Tonne power road roller to required gradient and camber complete all as specified and directed. Note :- (a) Material for premixed carpet and sand seal coat shall be mixed in hot mixing plant. (b) Mix design of bituminous SDAC will be got done from approved lab. (c) The premix carpet shall be laid with mechanical paver/sensor paver.
Material and Labour for repair to pot holes not exceeding 1 sqm each including sweeping free from dust or mud or water scoring sunken surfaces in road, path etc cutting around edges to at least 30 mm in depth and making good the surfaces by applying a priming/tack coat with bituminous primer @ 5 Kg per ten square metres and putting in premixed carpet and well rammed to a uniform surfaces and sealed with binder 9.8Kg per 10 Sqm, blinded with 0.09cum of stone chipping 6.3mm size per 10 Sqm to match/join the existing road surface, complete all as specified and directed. (for Independent Pot hole).
Material and Labour for marking lines dashes, arrows, letters etc on road, pavement and the like of any width using thermoplastic compound white / yellow paint, confirming to BIS 3262, and according to the specification laid down IRC & latest MORTH (latest revision), 2 mm thick, hot applied with thermoplastic road marking machine including material and spreading glass beads through spreader attached with the machine complete all as specified and directed.
S&F ROAD STUD yellow colour 110X120X24mm ABS plastic dynamically design having high impact strength, high density and fixed with nails and adhesive of size (Model No DA 972 of Dark Eye or equivalent of Makes specified in Appx 'A') complete all as specified and directed.
S&F in repair solar stud size 125 x 125 x25 mm made from alunimium ally and PC construction solar powered by monocrystal solar panel. Type of battery one high capacity No cd rechargable battery view distance approximate 1000 mtr LEDs 10 mm, 3 pieces each side and piece are used for high brightness of red colours back up 12 hours of continuous lighting at night, mounted on concrete or muddy ground water proof and harness tested completed all as specified and directed. (Model DA 110 of DARK EYE or equivalent of make specified in Appx 'A'.
Kohinoorconstruction Company
JAGSON DEVELOPERS
RATTAN CHAND CHANDAN AND CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .