Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.8 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹46.9 L+₹1.1 L (2.34%)Rejected-AOC 451 NEAR RADHA KRISHAN MANDIR VPO MAMUN PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L2 | Rejected-AOC Rejected | |
| 3 | L3₹48.8 L+₹3.0 L (6.56%)Rejected-AOC | L3 | Rejected-AOC Rejected | |
| 4 | L4₹49.4 L+₹3.7 L (8.01%)Rejected-AOC C O ANU REFRIGERATION WORKS GANDHI CHOWK PATHANKOT GANDHI CHOWK PATHANAKOT PUNJAB 145001 | PATHANKOT | PUNJAB | 145001 | L4 | Rejected-AOC Rejected |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
20 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer(N) Mamun
Garrison Engineer(N) Mamun Pin-145001
PROVN OF SECURITY WALL WITH ALLIED INFRASTRUCTURE, GATES , SEPTIC TANK AND SOAKAGE WELL WITH SEWAGE LINE UNDER AGE B/R-II OF GE (N) MAMUN
2023_MES_634152_2
GE(N)/M-66/2023-24
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer(N) Mamun
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer(N) Mamun
₹94,000
12 Mar 2024
27 Jan 2024
22 Feb 2024
27 Jan 2024
20 Feb 2024
8 Feb 2024
Amount
Excavating in trenches n exc 1.5m wide and n exc 1.5m depth for foundation etc or for shafts, well, cesspits, manholes, pier holes, etc n exc 10 sq m on plan and n exc 1.5m depth and getting out in any type of soil complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
M&L for RCC M-25 ( Design mix) as in foundations including rafts, footings, foundations beams, plinth beams, bases for columns and basement slabs etc complete all as specified and directed.
Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.
Removing excavated material to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.
M&L for RCC M-25 ( Design mix) as in columns, pillars, piers, posts and struts etc complete all as specified and directed.
M&L for RCC M-25 ( Design mix) as in beams, cantilever, bressummers, lintels over 1.50m span complete all as specified and directed.
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, including flat rough finished surafaces of concrete complete all as specified and directed.
Use and waste of formwork to sides of pillars, posts, struts, piers, columns, and stanchions, square, rectangular or polygonal in shape, including flat rough finished surafaces of concrete complete all as specified and directed.
Use and waste of formwork to sides and soffits of floor and roof beams, beams haunching, girders, bressummers, lintels and cantilever, shelves including supports over hangs etc rough finished surfaces of concrete (flat) complete all as specified and directed.
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified & directed.
S&F Mild steel TMT bars 5 to 10mm dia as in stirrups cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified & directed.
M&L for Brick work with fly ash bricks (Old Size bricks), sub class'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified & directed.
M&L for 15mm thick plaster in two layers (10+5mm) in cemet mortar 1:4 external layer of plaster shall be mixed with liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc, surface finished even and smooth with using extra cement complete all as specified and as directed. Note: WPC shall be measured and paid for separately.
M&L for preparing new plastered surface of wall and appying two coats of cement base paint mixed with silicon based water repellent compound by roller/brush complete all as specified & as directed.
S&F Rolled mild steel in: Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe-410-W (Gde-E-250) quality-A
S&F galvanised 2 strand steel barbed wire 2.24 mm dia barded with 2mm dia wire at 75 mm spacing, straining and fixing to any type of standard rail, standard bolts including securing or tying at crossing with galvanized mild steel wire staple or steel pins complete all as specified and directed. Note: Each line of wire to be measured separately.
M&L for preparation of new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
M&L for concertina coil 600m d, core wire dia 2.5mm with 0.5mm thick tape havig barb length 10mm, spacing @25mm c/c securing or tying including provn of MS core stapples or steeel pins etc complete all as specified and directed.
S&F Frame work such as door or gates, covers of angle or other section with gueset plate, rails,braces, MS sheet, round wire, etc, including hooks, hold fast, locking arrangement, hanging arrangement, fastening and fixing complete to similar work conferming to fe-290 Gde E-165 structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed
M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete in steps, jambs, pillars, window and cills,cooking plateform over and including 15 mm thick screed bed or bedding layer of mortar in CM 1:4, pointing in white cement using marble dust (1:2) with admixture of pigment to match with shade of granite complete all as specified and as directed.
M&L for PCC 1:2:4 Type B1 (using 20 mm graded crushed stone aggregate) as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, benching, copings, kneelers, apex stones, bed plates, kerbs , fillet, gola, water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including necessary form work complete all as specified and directed
M&L for 15mm thick cement plaster in CM 1:4 on fair faces of brick masonary /concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Supply only liquid water proofing compound complete all as specified and directed.
M&L cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in surface channel and drains complete all as specified and directed
Extra for forming fair finished drain or channel any inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed
M&L 100mm thick concrete bed to drain pipes including forming cadles in cement concrete 1:3:6 type C2 using 40mm graded crushed stone aggregate for 100-150 mm bore pipe including forming cradle complete all as specified and directed.
M&L for 150 mm bore reinforced cement concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.
M&L for LLDPE 2000 Ltr Septic Tank designed to carry sewage and sullage water, excavation and earth work in ay type of soil, PCC 1:4:8 type D2 foundation, bent shaft, connection etc complete all as specified and directed.
M&L for Soakage well of size 2.4mm dia, 3m depth including excavaion and earth work in any type of soil, PCC 1;3;6 type C2 foundation, Honey combing walls in CM 1:4, lintle band, RCC slab in M25, SFRC cover, interconnecting pipes or RCC/DWC connection etc, filled with brick bats complete all as specified and shown on drawing No CEPZ/C-TD/013/13 sheet 1/5 to 5/5 Note: TD drawing shall be supplied by the Engineer in Charge.
RD Engineers
M/S S KUMAR & CO
ANU REFRIGERATION WORKS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .