SPECIAL REPAIR TO CERTAIN PORTIONS OF SNCOs MESS AT AFS BEGUMPET UNDER GE (AF) HAKIMPET

B/R PORTION : Dismantling floor / wall tiling including cement mortor bedding (but not backing) removing of unserveable tiles from site and rubbish of the premises complete all as specified and as directed.

Demolition of plain cement cement concrete/terrazo tiles with cement mortor bedding in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removing the debris outside MOD land complete all as specified and as directed.

M & L for Plain Cement concrete type C-2 1:3:6 using 40mm graded crushed stone aggregates 75mm thick as in plinth protection, hard standing, sub base, floor finish complete all as specified and as directed.

M & L for Plain Cement concrete type B-0,1:2:4(12.50 mm graded aggregate) 25mm thick complete all as specified and as directed.

M&L for 15 mmm thick screed bed or bedding layer in CM 1:6 as in base to floor finish complete all as specified and as directed.

M&L Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.16 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match joint free complete all as specified and as directed.

M&L Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.16 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match joint free complete all as specified and as directed.

All as per item No 7 above here-in-before but as in vertical surface such as skirting etc. to match with the flooring complete all as specified and as directed.

M&L Vitrified Ceramic light coloured tiles 9 to 10 mm thick area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match joint free complete all as specified and as directed.

All as per item No 9 above here-in-before but as in vertical surface such as skirting etc. to match with the flooring complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 as in base for wall tiling in shirting/dado complete all as specified and as directed.

M&L for coloured Glazed ceramic tiles in vertical surface 350 x 250mm x 7mm or 450 X350X 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Dismantling stone slab of any description or thickness in floors approns etc laid bedded and pointed in any mortar complete all as specified and as directed.

M & L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Mirror polishing and edge rounded all as per specified for steps and including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for 20mm Granite (of any type) work (table rubbed and polished) including necessary moulding on edges fixed on cup board shelves partitions holded on angle cleats, holdfasts ,rails including proper fixing arrangments with screws etc independently complete all as specified and as directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto complete all as specified and as directed.

M&L 75 mm thick PCC(1:4:8) Type D2 (using 40mm graded aggregte) in sub floors, sub bases, floors and pavings etc complete all as specified and as directed.

M& L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and as directed.

M&L sand filling under floors of interlocking tiles including watering and consolidation complete all as specified and as directed.

M& L PCC (1:4:8) Type D2 (using 40mm graded aggregte) in foundations, filling and mass concrete complete all as specified and as directed.

M&L granite or trap Stone kerb of roughly squared stones of size 20cm x 30cm,dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush complete all as specified and as directed.

M&L 20cmx20cmx25mm / 30cmx30cmx25mm thick chequerd cement concrete tiles grey cement with pigment set and jointed in neat cement slurry including 15mm thick screed bed or bedding layer in CM 1:4 as in base to floor finish complete all as specified and as directed.

Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and as directed.

Taking down mud plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for 15 mm thick plastering in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick plastering on fair faces of brick work or concrete surfaces in two layer with 10 mm thick in CM 1:6 and top 5 mm thick in CM 1:4, mixing water proofing compound at 3% by weight of cement (but excluding the cost of WPC) finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick plastering in CM 1:6 on fair faces of brick work or concrete surfaces in two layer finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for 10 mm thick plastering in CM 1:3 on fair faces of brick work or concrete surface as in ceiling including finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing new plastered surface of wall and applying 2mm thick putty finish to obtain smooth finish wall surface and applying two coat of distemper over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparing new plastered surface of ceiling and applying 1mm thick putty finish to obtain smooth finish in ceiling surface and applying two coat of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparing new plastered surface of wall surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L for complete removal of existing treatment of wall and applying 2mm thick putty finish to obtain smooth finish wall surface and applying two coats of distemper over a coat of primer complete all as specified and as directed.

M&L for complete removal of existing treatment of ceiling and applying 1mm thick putty finish to obtain smooth finish ceiling surface and applying two coats of distemper over a coat of primer complete all as specified and as directed.

M&L for complete removal of existing treatment on walls, Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed .

M&L for preparation of existing old painted surfaces of walls and applying two coat of cement based paint, complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of cement based paint, complete all as specified and as directed.

M&L for preparing old plastered surface of wall and applying one coats of OBD complete all as specified and as directed.

M&L for preparing old plastered surface of ceiling and applying two coats of white wash complete all as specified and as directed.

M&L for Flush/raised pointing in CM 1:4 to squared rubble masonry, coursed complete all as specified and as directed.

Demolition of RCC Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) for landings, cover slabs (for man holes etc.) chullah hoods, chajjas,water troughs,mangers, shelves and similar articles with plain faces manhole cover slabs including necessary form work and set in CM (1:4) complete all as specified and as directed.

M&L fot TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Demolition of brick work built in CM including All Quions, arches, pillars etc complete all as specified and as directed.

M & L Brickwork with old size bricks using fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.

M & L for Pre-cast cement concrete block masonry with solid blocks, Type C1 1:3:6 (20mm graded aggregate) exc. 10 cm in width and setting in cement mortar 1:4, complete all as specified and as directed.

Providing precast cement concrete louvres and jallies of type B0(1:2:4) 12.50 mm graded aggregate set in cement mortar 1:4 , 25mm thick (measured solid), including all mouldings but excluding frame complete all as specified and as directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and as directed.

Providing Cement Concrete in surface channels and drains type B2 1:2:4 using 40 mm graded agrregate complete all as specified and as directed.

Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred,stopped ends etc complete all as specified and as directed.

M& L providing Cement Concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in copings and similar work complete all as specified and as directed.

Cutting chases, in stone walls, pinning in, making good to facing where required and pointing in cement mortpor 1:3 for concealed water tubing and making good, cuting exc, 10 cm but n.exc 20 cm girth complete all as specified and as directed.

S&F 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including Taking up or down steel tubing and connections including cleaning for refixing or removing to store 15 mm bore complete all as specified and as directed.

S&F 32 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including Taking up or down steel tubing and connections including cleaning for refixing or removing to store 20 mm bore complete all as specified and as directed.

S&F Brass elbow 20(3/4 x 1/2)mm dia complete all as specified and as directed.

S&F Brass tee 20mm dia complete all as specified and as directed.

S&F Male Brass Threaded Adaptor 20mm dia (MTA/ MBTA) ) complete all as specified and as directed.

S&F Female Brass Threaded Adaptor (FTA/ FBTA) 20mm dia complete all as specified and as directed.

S&F Tank Adaptor 32mm dia complete all as specified and as directed.

S&F union of size of 32mm dia complete all as specified and as directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S&F Gun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed 32 mm bore complete all as specified and as directed.

Dismantling water tank of capacity exc 500 & n.exc 1000 ltrs complete all as specified and as directed.

S&F 1000 ltrs capacity Rotational moulded polythene water strong tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F in repairs Ball valves high pressure of PTMT with eppoxy coated Aluminium rod & high density plastic ball screwed for iron pipes and fixed 25 mm bore (Minimum weight 455 gms) complete all as specified and as directed.

Demolition and breaking up of AC/PVC drain pipes 100 mm dia set in CM complete all as specified and as directed.

S&F in repairs PVC (SWR) floor trap diameter of out let 75 mm ,plain with grating including jointing with solvent cement fixed in cement concrete complete all as specified and as directed. (Cement concrete shall be measured and paid seperately)

S&F 150 X150 mm Salt-glazed stone ware gully traps, square, type 'P' complete all as specified and as directed.

Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation or manholes etc., and area n.exc. 10 Sq.m on plan and getting out in soft/ loose soil complete all as specified and as directed.

Returning, filling in with approved soil obtained from excavation including spreading levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and as directed.

Removing the excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed to walls bore of the pipe 110 mm in repairs complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed to walls bore of the pipe 75 mm in repairs complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bends any radiuis complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bends with access door any radiuis complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends any radiuis complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends with access door any radiuis complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) junction single, (single T) complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) junction single, (single T) with access door complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) junction single, (single T) complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) junction single, (single T) with access door complete all as specified and as directed.

M&L for cutting holes in stone masnory built in cement mortor and making good in CM 1:3 or in cement concrete 1:2:4 tupe B1 as required complete all as specified and as directed.

Supply and fix in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. including flush pipe,bush complete in all respect all as specified and directed. S&F 10 lit Vitreous China valveless,syphonic action type,flushing cistern, low level,white, with inlet, ball valve,float and handle including brackets all as specified and directed.S & F in repairs Plastic water closet seat, black, recessed bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repairs vitreous china squating pan orrissa pattern size 580 x 440 mm white with integral foot rest , including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythene of loe or high density or PVC 32 mm dia, , closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.

S&F in repairs, vitreous china wash hand basin white 550x400mm of size including cutting for and pinning in ends of brackets or erecting stand including brackets, PVC waste pipe and coupling of suitable size including removal of debries off the premises complete all as specified and as directed.

S&F Vitreous China Urinal, full stall type, white Vitreous China urinals, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe including connections to flushing pipe and outgoing pipes fixed in repairs ,Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), waste coupling of 32 mm discharge pipe (Minimum weight 32mm-45gms) ,push tap for urinal 15 mm complete all as specified and as directed.

S & F in repairs of Table Mounted Tall Boy Basin Tap Jaquar Fonte FON-CHR-40021 complete all as specified and as directed.

S&F in repairs, 15mm bore Pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron/GI pipe and fixed complete all as specified and as directed.

S&F in repairs, 15mm bore Stop cock / angle valve , cast copper alloy, chromium plated, fancy type, screwed down, high pressure, screwed both ends for iron/GI pipe or for union complete all as specified and directed.

S & F for Wall Mixer with Provision for overhead Shower with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges complete all as specified and as directed. Make :- Jaquar Code No CQT-CHR-23273UPR

S&F in repairs, 125mm size chromium plated shower rose with or without swivel joint complete all as specified and as directed.

S&F in repairs, PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and as directed.

S&F in repairs, 15mm bore two way bib taps, long body, fancy type, chromium plated, cast copper alloy, screwed down, screwed for iron/GI pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs, 15mm bore bib taps, long body, fancy type, chromium plated, cast copper alloy screwed for iron/GI pipe or for brass ferrule complete all as specified and as directed.

S & F in repairs 40 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S & F in repairs white Toilet paper holder with flat recessed type stainless steel with brass chromium plated stainless steel screws complete all as specified and as directed.

S & F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed in repairs complete all as specified and as directed.

S & F Soap dish vitreous China white, ap proximate size 160x 160x90mm any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F brass coat hooks, solid body, 175mm to 250 mm complete all as specified and as directed.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F cornner glass shelf of size 9"*9" shelf and frond,circle in design fixed over chromium plated brackets of heavy duty with frond linings with glass fixed in wall with necessary screws complete all as specified and as directed. Make : Jaquor Model No : ACN CHR 1173

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with and railing 60cm long with with aluminium alloy brackets and guard rail complete all as specified and as directed.

Dismantling/removing the textile coverings and cover fillets complete all as specified and as directed.

Demolition of plain cement concrete of any description in any position as in padding concrete, sunken slabs coping, benching, kerbs or mud stops etc and removing the debris outside MOD complete all as specified and as directed.

M&L PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in terrace (padding layer) including water proofing compound finished even surface complete all as specified and as directed. Note: Paid and Measured water proofing compound seperately.

M&L for rendering 10 mm thick in CM 1:3 on concrete roof slabs including mixing water proofing compound at 3% by weight of cement finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for Providing, cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, using water proofing compound at 3% by weight of cement but excluding the cost of WPC ( water proofing compound should be measured and paid seperately) complete all as specified and as directed.

M&L for cleaning the roof surface and applying oil bond bitumen primer @ 0.20 kg/sqm providing and laying 4 mm thick APP modified water proofing membrane weight not less than 4 kg/sqm reinforced with non woven polyester mat weighing not less than 160 gm/sqm having soften point not less than 140 degree centigrade tensile strength not less than 800/N/sqm cum tearing strength 180N with minimum of 10 cm side laps and 15cm end laps by application of torch applying a coat of blown grade hot bitumen over the membrane @ 1.2 kg/sqm and providing garnish with solar reflective bitumen aluminium paint @ 0.1 kg/sqm over completed area of membrane complete all as specified and as directed.

Supply only integral water proofing compound as per manufactures instruction complete all as specified and as directed.

M & L 25mm Harrison rails, mild steel, chromium plated,stainless steel with fixing brackets, stops, rollers etc complete all as specified and as directed.

M & L in repairs for brass chromium plated Brackets, Ends Cap and Holder suitable for 25mm dia Stainless Steel Curtain Rod fancy type complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality frosted fixing with putty in squre n.exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 1st class hard wood beads, straight (any size) for glazed or guaged joinery, renewed, including mitres etc. and removing old beads complete all as specified and as directed.

S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stain less steel wire staples complete all as specified and as directed.

Taking down chowkats with shutter (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and as directed.

Taking down chowkats with shutter (without taking off shutters from the frame) n.exc 1.5 Sqm each incl steel windows and ventilators complete all as specified and as directed.

M&L for PCC 1:3:6 type B1 (using 20 mm graded stone aggregate) as in cills, copings, apex stone, bed plates kerbs levelling course including waethering, slightly rounded or chamfered angles and throating as directed including mixing water proofing compound (but excluding the cost of WPC) as per manufacturers instrucions complete all as specified and as directed.

S & F for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8 , Clause 8.24 (a), supplied & fitted to chowkats complete all as specified and as directed.

S&F in repairsFactory Made single extruded WPC (Wood polymer composite) solid decorative type flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powedr/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face ) and 900 N (Edge), minimum compressive strength 50 N.mm2, modulus of elasticity 850 N.mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hings of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40mm and fixed with stain less steel wire staples complete all as specified and as directed.

M&L preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm),sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated),steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and as directed. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.

Area not exceeding 2.00 sqm each

Area exceeding 2.00 sqm each

S&F Sheet glass, ordinary quality 4.8mm thick and glazing with rubber to UPVC frame in square/rectangle exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F Supply and fixing factory made UPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing complete all as specified and as directed.

Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete with CM 1:6 complete all as specified and as directed.

S&F frosted Sheet glass, ordinary quality 4.8 mm thick and glazing with rubber to UPVC frame in square/rectangle n exc 0.5 sq. m in each pane complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S & F in repairs Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed.

S & F in repairs Factory made single extruded WPC(Wood Polymenr Composite) solid door/window/Ceosetory windows and other Frames/chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated witgh miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame densityy of 750 kg/cum, screw withdrawal strength of 2200 N (Face) and 1100 N (Edge), miimum compressive strength of 58 N/mm2, modules of elasticity 900N.mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of requred dia and length complete as per direction of Engineer-in-charge. (M.S hold fast/lugs or SS dash fasteners shall bne paid for separately) manufacturers instructions complete all as specified and as directed.

S & F in repairs Factory made single extruded WPC(Wood Polymenr Composite) solid door/window/Ceosetory windows and other Frames/chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated witgh miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame densityy of 750 kg/cum, screw withdrawal strength of 2200 N (Face) and 1100 N (Edge), miimum compressive strength of 58 N/mm2, modules of elasticity 900N.mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of requred dia and length complete as per direction of Engineer-in-charge. (M.S hold fast/lugs or SS dash fasteners shall bne paid for separately) manufacturers instructions complete all as specified and as directed.

S&F in repairs Factory Made single extruded WPC (Wood polymer composite) solid decorative type flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powedr/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face ) and 900 N (Edge), minimum compressive strength 50 N.mm2, modulus of elasticity 850 N.mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hings of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed.

S&F 100 mm long MS butt hinges, medium weight cold rolled complete all as specified and as directed.

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150 mm long extruided aluminium alloy handles fabricated type anodised complete all as specified and as directed.

S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of cast or extruded section and fixing bolts and sliding blots of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Dismantling of wall boards (fibre, Pulp, insulation, plywood etc.) as in cup boards, shelve, pelmet boxes etc complete all as specified and as directed.

S&F powder aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F Poweder coating aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified complete all as specified and as directed.

S&F Sheet glass, 4.8 mm ordinary quality and glazing with oil putty in square in exc 0.5 sq.m in each pane complete all as specified and as directed.

Supply and fixing for Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.

S & F False Ceiling Frame Work using poweder coated Aluminium snap grid of size 605 x 605 mm size of standard aluminium section such as wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/Rm main/cross tees of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/Rm, grid size n.exc. 605 x 605mm suspended with 4mm dia GI wire(up to 1200 mm length) at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab roof truss fixed with suitable size MS hook and fastening bolts etc fixed in ceiling with clips to aluminium snap grid for fixing 12mm thick Gyprock false ceiling boards (Ceiling board measured and paid seperately) complete all as specified and as directed.

S &F 12 mm thick gyprock false ceiling boards decorative type of suitable size to fixed in poweder coated aluminium /GI /wooden framework etc in ceiling with necessary screws all as specified including two coats of OBD over a coat of primer on ceiling surfaces complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting,any gauge, thickness,including nanital or similar pattern roof coverings complete all as specified and as directed.

S&F steel work in Tubular Roof trusses,trussed, purlins, rafters including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S 1161 1979 grade st 240 complete all as specified and as directed.

S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410 W (Grade E-250) quality A complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L Anti termit treatment Of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and as directed.

M&L antitermite treatment At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.

E/M PORTION : Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses,pendants, regulators sockets etc. to be measuredseparately), removing materials to store for keeping in safe custody for reuse at site and making gooddisturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M& L for point wiring complete with 1.5 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade ISI marked with multi stranded copper conductor drawn through and including non- metallic rigid PVC conduit medium grade and conduit accessories ISI marked including provision of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS ISI marked as earth continuity conductor, fabricated steel sunken terminal box duly painted made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick bakelite/PVC sheet ISI marked top cover with brass/chromium plated screws and cup washers for housing switches, socket outlets, fan regulators etc, complete all as specified and as directed for One LED tube light/LED Lamp/Bldg security light controlled by one way switch.

All as per Ser item No 158 above but for One Ceiling /Exhaust Fan Point controlled by one one way switch complete all as specified and as directed.

All as per Ser item No 158 above but for 5 amps socket point on same board complete all as specified and as directed.

All as per Ser item No 158 above but for 5 amps socket point on independent board complete all as specified and as directed.

All as per Ser item No 158 above but with 4 sqmm cable for 15 amps socket outlet on independent board with 4 Sqmm earth continuty wire complete all as specified and as directed.

Supply and fix ceiling rose surface backelite three terminals, PVC/polycarbonate, insulated body complete all as specified and as directed.

Supply and fix switch piano modular type, 6 Amps 240 volts single pole one way complete all as specified and as directed. Make:- Anchor /Havells

Supply and fix socket outlet, 5 pin 6 Amps, Modular type complete all as specified and as directed. Make :- Anchor /Havells

Supply and fix socket outlet 6/16 Amps, 6 in 1, Modular type complete all as specified and as directed. Make :- Anchor /Havells.

Supply and fix switch piano modular type,15/16 Amps 240 volts single pole one way complete all as specified and as directed. Make :- Anchor /Havells

supply and fix modular plates wit frame white colour 2 module complete all as specified and as directed.

supply and fix modular plates wit frame white colour 3 module complete all as specified and as directed.

supply and fix modular plates wit frame white colour 4 module complete all as specified and as directed.

supply and fix modular plates wit frame white colour 6 module complete all as specified and as directed.

supply and fix modular plates wit frame white colour 8 module complete all as specified and as directed.

Supply and fix stepped type fan regulator electronic modular type, 2 module, 240 Volt complete all as specified and as directed. Make : Havells /Anchor

Supply and fix in replacement 1200mm BLDC 5star rated ceiling fan with regulator enable motor with power input of 28Watt with 10% tolerance, motor insulation B, 230V , 50Hz, single phase A.C speed 350, Air delivery 215CMM with complete set of 3nos blades, down rod , 2 Nos canopies, shackel kit and all remaining accessories including nut bolts, washers ' including connecting up of cable from ceiling rose or connector to fan complete all as specified and as directed. Make : Usha (Model No.Technix) or equivalent model in Havells / Orient. Note : - Old Unserviceable fans shall be deposited to MES store.

S&F Exhaust Fan of Size 450mm Sweep, Steel body, AC Single Phase. 230 Volt with Blades, Frame and Louvers, Providing Connection with and including 3 Core Flexible Copper Conductor Cable of suitable Size and Length , complete all as specified and as directed. (Single living toilets) Make : Usha or equivalent model in Havells/ Orient

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm (for Bar Toilet) complete all as specified and as directed.

M&L Cutting Holes in Brick/Stone/RCC Walling, for inserting of exhaust fan. and Making Good to Dismantled portion with Cement Concrete 1:2:4 (20mm graded stone aggregates) or Cement Mortar 1:3 (as required) and Adjoining Surfaces in Cement Mortar 1:4 complete all as specified and as directed.

Supply & fix exhaust fans steel body AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and directed. Note: - Old Unserviceable fans shall be deposited to MES store.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fix 20/22 watt intregated LED tube light fitting 4 ft , suitable for single phase 230 Volts, 50 Hz AC supply and mounted on wall or ceiling, complete with all accessories internally prewired and including electrically connection with copper conductor cable of size 0.5 Sqmm (nominal area) complete all as specified and as directed. Make -Crompton /Philips/ Wipro/ Vinay/Havells.

Fixing only 20 watt intregated LED tube light fitting 4 ft Received from item No.1, complete with all accessories complete all as specified and as directed.

S&F in repair for building security light 35 watt LED light fitting, new generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP-65 roadway luminaire with high power LEDs as light source & exclusively designed polycarbonate cover alongwith electronic driver, complete after taking down old unserviceable light fitting complete all as specified and as directed. Make: Crompton Philips / Wipro/ Vinay.

S& F in repair Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed ( for single living and Guest Room).

S&F 12W LED bulb rechagreable emergency bulb with backup of 4Hrs, CDL complete all as specified and as directed.

Taking out MCB DBs from wall of any capacity includind MCBs complete all as specified and as directed.

Supply and fix SP&N DBs, double door, 240 volt, 8 way DB complete all as specified and as directed.

Supply and fix SP&N DBs, double door, 240 volt, 4 way DB complete all as specified and as directed.

Supply and fix SP&N DBs, single door, 240 volt, 2 way DB complete all as specified and as directed. (For Gate Light of Guest Room)

S & F in repair MCCBs 63 Amps current capacity, 415V, 16 KA, 4 Pole, thermal magnetic type, along with spreader ternminals complete all as specified and as directed.

Supply and fix in repair VTPN DB , 415 volt, 4 way, 100Amp Bus Bar with metal door having facility for MCCB incomming up to 250A and MCB outgoing complete all as specified and as directed.

M&L in repair for MCB single pole, 240 volts, 6 - 32 Amps, 10 KA C Curve complete all as specified and as directed.

M&L in repair for MCB single pole & neutral 240 volts 32Amps C curve complete all as specified and as directed.

Supply and fix 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 40 To 100 AMP and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and as directed.

M&L for sub main wiring comprising single core , 2 Runs of 6 sqmm nominal cross sectional area,FRLS multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. in PVC conduit and its fittings complete concealed including provision of 1X4 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire complete all as specified and as directed.

All as per iten No. Above but two single core 2.5 sqmm FRLSH PVC insulated copper cable including one single core 2.5 sqmm multi strand FRLSH PVC insulated copper wire for earth continuty conductor for Gate lights and Electrcal backup for solar water heater complete all as specified and as directed.

M&L for sub main wiring comprising single core , 4 Runs of 10 sqmm nominal cross sectional area,FRLS multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. in PVC casing capping/conduit and its fittings complete surface/concealed including provision of 1X10 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire complete all as specified and as directed. (From ground floor VTPN to FF VTPN)

Supply and fix Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB and electrically connecting up fixed in repair complete all as specified and directed.

Taking down/out unserviceable or serviceable UG Cables of any Cross Sectional Area and Connections including Bricks, GI Pipes, etc. of any descriptions, laid in Trenches and/or fixing with Walls/Poles including Segregating of Serviceable Materials viz Bricks, Cables, GI Pipes, etc. and keep in Safe custody for re-use, complete all as specified and as directed. Note : Earth Work shall be Measured and Paid for separately under relevant Items.

M&L for cable in trenches/passing through pipe/on wall , XLPE insulated, heavy duty, galvanised steel strip or wire armoured electric LT cable with stranded aluminium conductor for 1100 volts grade cross sectional area 10 sqmm 2 core complete all as specified and as directed. (Gate light and Bar Toilet DB) Note : Rate of the saddle and clamp for fixing of cable on wall is included in this rate.

All as per Ser item No 199 above but of size 25 Sqmm 3.5 Core complete all as specified and as directed.

M&L Sand Cushioning (dry) in Trenches for protec-tion of UG Cables (below, above and around the UG Cable laid in Trenches) of 230mm Spread thick -ness and consolidated (punned) upto 180mm thickness complete all as specified and as directed. Note : For the purpose of Payment, Punned thick-ness of Sand Cushioning only shall be Measured and Paid for.

S&F Sub-Class B brick, well burnt, laid breadth-wise along the length of Cable laid in Trenches over Sand Cushion laid for UG Cable Protection complete all as specified and as directed.

S&F in repair 40/50 Watt LED Post Top lantern is a weather proof indirect lighting solution which improves horizontal uniformity decorative type, with reduced glare and improved lighting control IP65 complete all as specified and as directed. Make : CG or equivalent model in Philips / GE/Havells

Labour and Tools for intact Removing and Refixing the same its original position of Solar Water heater complete set of capacity upto 300 LPD including electrical/water inlet outlet connections and cleaning of solar plates and replacement of electrical backup heating element and thermostat etc.if any damage caused during the removing and refing wiill be borne by the contractor complete all as specified and as directed.

Supply and Fix Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and as directed.

Material and labour for Hot water pipe duly insulated with glass wool and aluminium cladding 15 mm bore including all fittings complete all as specified and as directed.

Material and labour for Hot water pipe duly insulated with glass wool and aluminium cladding 20 mm bore including all fittings complete all as specified and as directed.

M&L for Earthing complete with GI earth plate electrode of size 600x600x6 mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to GI earth strip of size 25x4 mm earth lead by means of brazing, protected by galvanized iron pipe 40mm bore (Medium grade) all as directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 45 x 45 x 5cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel, wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part I including testing on complete all as specified and as directed.

Supply and fixing HDPE double wall corrogated pipe for earth strip/cable protection fixing in roof,ceiling,on wall/roads including clamp / saddle and road cutting wherever required making good to distubed surface complete all as specified and as directed.

Material and Labour for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and as directed.