REPAIR MAINT OF ALL TYPE OF WOODEN FURNITURE INCL POLISHING OF MD AND OTM ACCN UNDER GE SHILLONG.

Amount

Brief description of work (i) Removal of following existing unserviceable wooden components of various MES pattern furniture items or similar items carefully without disturbing the adjoining parts and supply and fix new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, glueing,welding, providing hinges placing every part in-tact and polishing the disturbed portion as applicable as per drgs. (ii) cleaning/Derusting of Stain/Dirt with sand paper, making the surface smooth, filling the holes with putty wherever required and applying two coats of French Polish over wooden items including necessary preparation complete all as specified and directed by Engr-in-Charge. Note: (a)Work will be executed where the furniture exist in different User Units of GE Shillong including BSO's Furniture Yard complete as directed by Engineer-in-Charge. (b) TImber shall be first class teakwood.

Chair Dining :- Drg No FD-279

S&F new back leg made out of 1st class hard wood (teak) with nails of appropriate size all as shown on drg including removal of old existing unsv back leg of chair in any position, complete, as directed by the Engineer-in-Charge.

S & F new front leg made out of 1st class hard wood (teak) with nails of appropriate size all as shown on drg including removal of old existing unsv front leg of chair in any position complete, as directed by the Engineer-in-Charge.

S & F new side rail made out of 1st class hard wood (teak) with nails of appropriate size all as shown on drg including removal of old existing unsv side rail of chair in any position complete, as directed by the Engineer-in-Charge.

S & F new front/ back rail made out of 1st class hard wood (teak) with nails of appropriate size all as shown on drg including removal of old existing unsv front/ back rail of chair in any position complete, as directed by the Engineer-in-Charge.

S & F new stiffner made out of 1st class hard wood (teak) with nails of appropriate size all as shown on drg including removal of old existing unsv stiffner of chair in any position complete, as directed by the Engineer-in-Charge.

S & F new back strip made out of 1st class hard wood (teak) with nails of appropriate size all as shown on drg including removal of old existing unsv back strip of chair in any position complete, as directed by the Engineer-in-Charge.

S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg and all as shown on drg including taking down and as directed by Engr-in-charge.

Chair Dining JCOs/OR:- Drg No FD/MAP- II/05

S&F new PVC seat 4mm thick with holes screwed with rails all as specified in drg including removal of old existing unsv PVC seat of chair complete, as directed by the Engineer-in-Charge.

S&F new back leg made out of 1st class hard wood (teak) with nails of appropriate size all as shown on drg including removal of old existing unsv back leg of chair in any position, complete, as directed by the Engineer-in-Charge.

S & F new front leg made out of 1st class hard wood (teak) with nails of appropriate size all as shown on drg including removal of old existing unsv front leg of chair in any position complete, as directed by the Engineer-in-Charge.

S & F new side rail made out of 1st class hard wood (teak) with nails of appropriate size all as shown on drg including removal of old existing unsv side rail of chair in any position complete, as directed by the Engineer-in-Charge.

S & F new front/ back rail made out of 1st class hard wood (teak) with nails of appropriate size all as shown on drg including removal of old existing unsv front/ back rail of chair in any position complete, as directed by the Engineer-in-Charge.

S & F new stiffner made out of 1st class hard wood (teak) with nails of appropriate size all as shown on drg including removal of old existing unsv stiffner of chair in any position complete, as directed by the Engineer-in-Charge.

S & F new back strip made out of 1st class hard wood (teak) with nails of appropriate size all as shown on drg including removal of old existing unsv back strip of chair in any position complete, as directed by the Engineer-in-Charge.

S & F new hard PVC/rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg including taking down complete, as directed by Engr-in-charge.

Chair WOODEN BOTTOM W/O ARMS:- Drg No FD-285

S & F new BWR grade plywood seat of appropriate size as per drawing including removal of old existing unsv plywood seat as existing of chair in any position complete, as directed by the Engineer-in-Charge.

S & F new back leg made of 1st class hard wood (teak) of appropriate size as per drawing including removal of old existing unsv back leg as existing of chair in any position complete, as directed by the Engineer-in-Charge.

S & F new front leg made of 1st class hard wood (teak) of appropriate size as per drawing including removal of old existing unsv front leg as existing of chair in any position complete, as directed by the Engineer-in-Charge.

S & F new side rail made of 1st class hard wood (teak) of appropriate size as per drawing including removal of old existing unsv side rail as existing of chair in any position complete, as directed by the Engineer-in-Charge.

S & F new front/ back rail made of 1st class hard wood (teak) of appropriate size as per drawing including removal of old existing unsv front/ back rail as existing of chair in any position complete, as directed by the Engineer-in-Charge.

S & F new wooden back strip made of 1st class hard wood (teak) of appropriate size as per drawing including removal of old existing unsv wooden back strip as existing of chair in any position complete, as directed by the Engineer-in-Charge.

S & F new wooden stiffener made of 1st class hard wood (teak) of appropriate size as per drawing including removal of old existing unsv stiffener as existing of chair in any position complete, as directed by the Engineer-in-Charge.

S & F new hard PVC/rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg including taking down complete, as directed by Engr-in-charge.

Chair Writing :- Drg No FD-280

S & F new back leg made of 1st class hard wood (teak) all as shown on drg, including removal of old existing unsv back leg of chair in any position complete, all as specified and directed by the Engineer-in-Charge.

S & F new front leg made of 1st class hard wood (teak) all as shown on drg, including removal of old existing unsv front leg of chair in any position complete, all as specified and directed by the Engineer-in-Charge.

S & F new side rail made of 1st class hard wood (teak) all as shown on drg, including removal of old existing unsv side rail of chair in any position complete,all as specified and directed by the Engineer-in-Charge.

S & F new front or back rail made of 1st class hard wood (teak) all as shown on drg, including removal of old existing unsv front or back rail of chair in any position complete,all as specified and directed by the Engineer-in-Charge.

S & F new back strip made of 1st class hard wood (teak) all as shown on drg, including removal of old existing unsv back strip of chair in any position complete, all as specified and directed by the Engineer-in-Charge.

S & F new arm rest made of 1st class hard wood (teak) all as shown on drg, including removal of old existing unsv arm rest of chair in any position complete, all as specified and directed by the Engineer-in-Charge.

S&F new stiffner made of 1st class hard wood (teak) all as shown on drg, including removal of old existing unsv stiffner of chair in any position complete, all as specified and directed by the Engineer-in-Charge.

S & F new hard PVC/rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg including taking down complete, as directed by Engr-in-charge.

Chair easy:- Drg No FD-229

S & F new back leg made of 1st class hard wood (teak) all as shown on drg, including removal of old existing unsv back leg of chair in any position complete, all as specified and directed by the Engineer-in-Charge.

S & F new front leg made of 1st class hard wood (teak) all as shown on drg, including removal of old existing unsv front leg of chair in any position complete, all as specified and directed by the Engineer-in-Charge.

S & F new side rail of seat frame made of 1st class hard wood (teak) all as shown on drg, including removal of old existing unsv side rail of seat frame of chair in any position complete, all as specified and directed by the Engineer-in-Charge.

S & F new front or back rail of seat frame made of 1st class hard wood (teak) all as shown on drg, including removal of old existing unsv front or back rail of seat frame of chair in any position complete, all as specified and directed by the Engineer-in-Charge.

S & F new side rail of back frame made of 1st class hard wood (teak) all as shown on drg, including removal of old existing unsv side rail of back frame of chair in any position complete, all as specified and directed by the Engineer-in-Charge.

S & F new top or bottom rail of back frame made of 1st class hard wood (teak) all as shown on drg, including removal of old existing unsv top or bottom rail of back frame of chair in any position complete, all as specified and directed by the Engineer-in-Charge.

S & F new arm rest made of 1st class hard wood (teak) all as shown on drg, including removal of old existing unsv arm rest of chair in any position complete, all as specified and directed by the Engineer-in-Charge.

S & F new hard PVC/rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg including taking down complete, as directed by Engr-in-charge.

RECANNING TO DIFFERENT TYPES OF CHAIR : Recanning of wooden chair of different sizes with 2mm wide cane having 3mm wide plastic cane border in Godrej pattern all as shown on drawing complete, including removal of old existing cane(any type) all as specified and directed by the Engineer-in-Charge. Eg :- Chair Dining, Chair writing, Chair Easy, Stool Dressing CB etc.

HAT STAND WITH MIRROR:- Drg No FD-233

Taking down old existing unsv plywood from front frame of hat stand and S&F new 04mm thick OSTF commercial plywood as per shape and size shown in drawing including french polishing to match the other parts complete, all as specified and directed by the Engineer-in-Charge.

Taking down old existing unsv plywood from back side of hat stand and S&F new 04mm thick commercial plywood as per shape and size shown in drawing including french polishing to match the other parts complete, all as specified and directed by the Engineer-in-Charge.

Taking down old existing unsv looking mirror from hat stand and supplying and fixing new looking mirror of size 300 x 440 x 5mm duly fixed in position complete all as shown on drawing.

Taking down old existing unsv beading from hat stand and S&F new 06x35mm thick teak wood beading all as per drawing including french polishing to match the other parts complete all as specified and directed.

Taking down old existing unsv wooden battens from hat stand and S&F new teak wood wooden battens as per shape and size shown in drawing and as directed.

Taking down old existing unsv pegs from hat stand and S&F new SS pegs of size 120x75mm (overall) to hat stand all as per drg and as directed.

Sofa Set 4/5 seater:- Drg No FD-281,373 & 258

S&F New front leg complete as per existing shape, size and as per Drg including taking down old unserviceable one complete all as specified and as directed.

S&F New rear leg complete as per existing shape, size and as per Drg including taking down old unserviceable one complete all as specified and as directed.

S&F New side rails complete as per existing shape, size and as per Drg including taking down old unserviceable one complete all as specified and as directed.

S&F New front rails of large three seater complete as per existing shape, size and as per Drg including taking down old unserviceable one complete all as specified and as directed.

S&F New back rails for large three seater complete as per existing shape, size and as per Drg including taking down old unserviceable one complete all as specified and as directed.

S&F New front rails for single seater complete as per existing shape, size and as per Drg including taking down old unserviceable one complete all as specified and as directed.

S&F New back rails for single seater complete as per existing shape, size and as per Drg including taking down old unserviceable one complete all as specified and as directed.

S&F New arm rest complete as per existing shape, size and as per Drg including taking down old unserviceable one complete all as specified and as directed.

S&F New wooden bearers for large three seater complete as per existing shape, size and as per Drg including taking down old unserviceable one complete all as specified and as directed.

S&F New wooden bearers for single seater complete as per existing shape, size and as per Drg including taking down old unserviceable one complete all as specified and as directed.

S&F New Teak wood batten for seat and back complete as per existing shape, size and as per Drg including taking down old unserviceable one complete all as specified and as directed.

S&F New Cushion of size 22''x21''x4'' thick of 40 density with superior quality cushion cover (Rate not less than 400 per/meter) as per sample kept at GE office. Colour of cushion will be as per sample and as directed by Engr-in-Charge/ GE. Cushion cover shall be duly stitched as per direction of Engr-in-Charge. Quality of tapestry cloth shall be as per sample kept at GE office.

Peg Table:- Drg No FD-384

Taking down old existing unsv top from peg table and S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (ISI marked) all as directed by Engineer-in-charge.

Taking down old existing unsv leg from existing peg table and S&F the same size new leg made out of Ist class hard wood (Teak) to Peg table duly french polished all as shown on drawing complete, as directed by Engineer-in-Charge.

Taking down old existing unsv long top rail from existing peg table and S&F the same size long top rail made out of Ist class hard wood (Teak) to Peg table duly french polished all as shown on drawing complete, as directed by Engineer-in-Charge.

Taking down old existing unsv short/ bottom rail from existing peg table and S&F the same size new short/ bottom rail made out of Ist class hard wood (Teak) to Peg table duly french polished all as shown on drawing complete, as directed by Engineer-in-Charge.

Taking down old existing unsv stiffener from existing peg table and S&F the same size new stiffener of Peg table made out of Ist class hard wood (Teak) to Peg table duly french polished all as shown on drawing complete, as directed by Engineer-in-Charge.

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg including taking down complete, as directed by Engr-in-charge.

TEAPOY:- Drg NoFD- 382

Taking down old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade MDF board (ISI marked) all as directed by Engineer-in-charge.

Taking down old existing unsv leg in any position, S&F new leg made of 1st class hard wood(teak) all as directed by Engineer-in-charge.

Taking down old existing unsv long rail in any position, S&F new long rail made of 1st class hard wood(teak) all as directed by Engineer-in-charge.

Taking down old existing unsv short rail in any position, S&F new short rail made of 1st class hard wood(teak) all as directed by Engineer-in-charge.

Taking down old existing unsv stiffner in any position, S&F new stiffner made of 1st class hard wood(teak) all as directed by Engineer-in-charge.

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg including taking down complete, as directed by Engr-in-charge.

Table Dining 6 Persons :- Drg No FD-273

Taking down old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade MDF board (ISI marked) for Table dining 6 persons all as per drg & as directed by Engineer-in-charge.

Taking down old existing unsv leg of table in any position, S&F new leg made of 1st class hard wood for Table dining 6 persons all as per drg & as directed by Engineer-in-charge.

Taking down old existing unsv long rail of table in any position, S&F new long rail made of 1st class hard wood for Table dining 6 persons all as per drg & as directed by Engineer-in-charge.

Taking down old existing unsv short rail of table in any position, S&F new short rail made of 1st class hard wood for Table dining 6 persons all as per drg & as directed by Engineer-in-charge.

Taking down old existing unsv support stiffner of table in any position, S&F new support stiffner made of 1st class hard wood for Table dining 6 persons all as per drg & as directed by Engineer-in-charge.

S& F new bracket of size 100 x 100 x 35 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete as directed by Engr-in-charge

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg including taking down complete, as directed by Engr-in-charge.

Table Dining (JCOs/OR) 1200 X 900 MM :- Drg No FD-273, FD/MAP-II/03

Taking down old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade MDF board (ISI marked) for Table dining 4 persons all as per drg & as directed by Engineer-in-charge.

Taking down old existing unsv leg of table in any position, S&F new leg made of 1st class hard wood for Table dining 4 persons all as per drg & as directed by Engineer-in-charge.

Taking down old existing unsv long rail of table in any position, S&F new long rail made of 1st class hard wood for Table dining 4 persons all as per drg & as directed by Engineer-in-charge.

Taking down old existing unsv short rail of table in any position, S&F new short rail made of 1st class hard wood for Table dining 4 persons all as per drg & as directed by Engineer-in-charge.

Taking down old existing unsv support stiffner of table in any position, S&F new support stiffner made of 1st class hard wood for Table dining 4 persons all as per drg & as directed by Engineer-in-charge.

S& F new bracket of size 100 x 100 x 35 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete as directed by Engr-in-charge

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg including taking down complete, as directed by Engr-in-charge.

Table Writing :- Drg No FD-275

Taking down old existing unsv top of table in any position & S&F new top PFT (Post Forming Top) made of 18mm thick prelaminated MDF board exterior grade all as specified in drg and directed by Engr-in-charge/GE.

Taking down old existing unsv leg of table in any position & S&F new leg made of 1st class hard wood (teak) complete all as specified in drg and directed by Engr-in-charge/GE.

Taking down old existing unsv top long rail of table in any position & S&F new top long rail made of 1st class hard wood (teak) complete all as specified in drg and directed by Engr-in-charge/GE.

Taking down old existing unsv top short rail of table in any position & S&F new top short rail made of 1st class hard wood (teak) complete all as specified in drg and directed by Engr-in-charge/GE.

Taking down old existing unsv bottom short rail of table in any position & S&F new bottom short rail made of 1st class hard wood (teak) complete all as specified in drg and directed by Engr-in-charge/GE.

Taking down old existing unsv bottom stiffner of table in any position & S&F new bottom stiffner made of 1st class hard wood (teak) complete all as specified in drg and directed by Engr-in-charge/GE.

Taking down old existing unsv drawers with knobs of table in any position & S&F new drawers with knobs of CP Brass made of 1st class hard wood (teak) complete all as specified in drg and directed by Engr-in-charge/GE.

Taking down old existing unsv shutter with complete fittings of table in any position & S&F new shutter with complete fittings including knob of CP brass in shade as specified in drawing and directed by Engr-in-charge/GE.

Taking down old existing unsv sides of side locker of table in any position & S&F new sides of side locker made of 1st class hard wood (teak) complete all as specified in drg and directed by Engr-in-charge/GE.

Taking down old existing unsv shelf of side locker of table in any position & S&F new shelf of side locker made of 1st class hard wood (teak) complete all as specified in drg and directed by Engr-in-charge/GE.

Taking down old existing unsv bottom of side locker of table in any position & S&F new bottom of side locker made of 1st class hard wood (teak) complete all as specified in drg and directed by Engr-in-charge/GE.

Taking down old existing unsv back of side locker of table in any position & S&F new back of side locker made of 1st class hard wood (teak) complete all as specified in drg and directed by Engr-in-charge/GE.

Taking down old existing unsv brass lock of table in any position & S&F new brass lock 75mm long, 06 lever with two keys to drawer of table complete all as specified in drg and directed by Engr-in-charge/GE.

Taking down old existing unsv brass knob of table in any position & S&F new CP brass knob to drawer/ shutter of table complete all as specified in drg and directed by Engr-in-charge/GE.

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg including taking down complete, as directed by Engr-in-charge.

Table 3'x2' or 900x600mm without Drawer :- Drg No FD-284

Taking down old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (ISI marked) all as directed by Engineer-in-charge.

Taking down old existing unsv leg of table in any position, S&F new leg made out of 1st class hard wood all as directed by Engineer-in-charge.

Taking down old existing unsv long rail of table in any position, S&F new long rail made out of 1st class hard wood all as directed by Engineer-in-charge.

Taking down old existing unsv short rail of table in any position, S&F new short rail made out of 1st class hard wood all as directed by Engineer-in-charge.

Taking down old existing unsv bottom centre stiffener of table in any position, S&F new bottom centre stiffener made out of 1st class hard wood all as directed by Engineer-in-charge.

Taking down old existing unsv bottom side stiffener of table in any position, S&F new bottom side stiffener made out of 1st class hard wood all as directed by Engineer-in-charge.

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg including taking down complete, as directed by Engr-in-charge.

Table 3'x2' or 900x600mm with Drawer :- Drg No FD-283

Taking down old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (ISI marked) all as directed by Engineer-in-charge.

Taking down old existing unsv leg of table in any position, S&F new leg made out of 1st class hard wood all as directed by Engineer-in-charge.

Taking down old existing unsv long rail of table in any position, S&F new long rail made out of 1st class hard wood all as directed by Engineer-in-charge.

Taking down old existing unsv short rail of table in any position, S&F new short rail made out of 1st class hard wood all as directed by Engineer-in-charge.

Taking down old existing unsv drawer of table in any position, S&F new drawer with fittings made out of 1st class hard wood all as directed by Engineer-in-charge.

Taking down old existing unsv bottom centre stiffener of table in any position, S&F new bottom centre stiffener made out of 1st class hard wood all as directed by Engineer-in-charge.

Taking down old existing unsv bottom side stiffener of table in any position, S&F new bottom side stiffener made out of 1st class hard wood all as directed by Engineer-in-charge.

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg including taking down complete, as directed by Engr-in-charge.

Table Centre :- Drg No FD-274

Taking down old existing unsv top from table centre and S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board all as per drg complete, as directed by Engineer-in-charge.

Taking down old existing unsv leg from existing table centre and S&F the same size new leg made out of Ist class hard wood teak duly french polished all as shown on drawing complete, as directed by Engineer-in-Charge.

Taking down old existing unsv long rail from existing table centre and S&F the same size new long rail made out of Ist class hard wood teak duly french polished all as shown on drawing complete, as directed by Engineer-in-Charge.

Taking down old existing unsv short rail from existing table centre and S&F the same size new short rail made out of Ist class hard wood teak duly french polished all as shown on drawing complete, as directed by Engineer-in-Charge.

Taking down old existing unsv stiffener from existing table centre and S&F the same size new stiffener made out of Ist class hard wood teak duly french polished all as shown on drawing complete, as directed by Engineer-in-Charge.

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg including taking down complete, as directed by Engr-in-charge.

Polishing of Wooden Furniture

Material and labour for removing/scrubbing of all old polished surfaces by using grinding machine & sand paper/ emary paper etc, including filling of cavities by putty/filler/sealer, preparation of old wooden surfaces by applying sienna/ burnt sienna uniformally and applying two coats of french/Lacquere polish using spray machine to obtain glossy finish to the following wooden furniture items complete all as specified including complete, as directed by Engg-in-Charge.

Chair Dinning (FD-279)

Chair Dinning JCOs/OR (FD/MAP-II/05)

Chair Wooden Bottom w/o Arms(FD-285)

Chair writing (FD- 280)

Chair easy (FD-229)

Hat Stand with Mirror (FD-233)

Sofa set 4 seater (FD-281, 373 & 258)

Sofa set 5 Seater (FD-281, 373 & 258)

Peg Table (FD-384)

Teapoy (FD- 382)

Table dining 6 person (FD- 273)

Table dining 1200x900mm (FD-273 & FD/MAP-II/03)

Table 900x600mm without Drawer (FD-284)

Table 900x600mm with Drawer (FD-283)

Table writing (FD- 275)

Table Center (FD- 274)

M/S Nakul Chandra Samal