SPECIAL REPAIRS TO LT PANEL AT AFS PUNE, INSTALLATION OF FLAME PROOF LIGHTING AT SES SECTION, PROVN OF CHARGING POINT AT ASV YARD AND CERTAIN MINOR WORKS AT AFS PUNE UNDER GE AF LOHEGAON

Amount

Supply install, test and commissioning of Powder coated LT panel cubical outdoor type free standing type compartmentalized in construction fabricated from CPRI approved manufacturer specified in particular specification and made out of 3 mm thick CRCA sheet. The Panel shall be of suitable size to accomodate all accessories / fittings, MCCBs,TPN Copper bus bars. The TPN bus bars shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on DMC/epoxy insulator. The Cubicle shall have free standing bottom frame/stand made out of equal angle iron of size 50mm x 50mm x 6mm with height 600mm, length & width of stand shall be as required. A detachable predrilled gland plate of thickness not less than 3 mm thick powder coated should be used at the bottom for entry of armoured cable of adequate size with glands.The above panel shall be front & back openable/lockable by key from both side. Copper extension link & bus bar shall be provided at incomer & outgoing end of MCCB of rating 100 Amps & above. The scope includes taking down of old unsv panel after disconnecting Existing cable, removal of cable glands, lugs, nut, bolts etc & Reconnecting the cables to new panels,including provision of Cable Glands for existing cables, lugs for existing cables, nut bolts washers, grouting bolts etc, providing medium wall thickness heat shrinkable tubes made out of cross linked weather resistant polymer material for R Y B & N core of cable inside the panel of suitable dia and length etc, complete all as specified and directed. The panel shall be Dust, vermin proof and powder coated of approved thickness complete including CTs, control wiring by 1.5 Sqmm Wire and consisting the following, a) Copper bus bar 300 Amps for 3 phase and 150 Amps for Neutral b) MCCB FP 200 Amps 415 Volt 25 KA - 1 Nos c) MCCB TP 100 Amps - 415 Volt 25 KA - 3 Nos d) MCCB TP 40 Amps 415 Volt 16 KA - 2 Nos e) MCB SPN 40 Amps - 2 No g) RYB Indicators - 1 Set Note - The lay out drawing of the panel shall be submitted and got approved from accepting officer by the contractor before panel fabrication.

All as per item no 01 but with the following acessories a) Copper bus bar 600 Amps for 3 phase and 200 Amps for Neutral b) MCCB FP 400 Amps 415 Volt 35 KA - 1 Nos c) MCCB TP 160 Amps 415 Volt 25 KA - 2 Nos d) MCCB TP 125 Amps 415 Volt 25 KA - 4 Nos e) MCCB TP 100 Amps 415 Volt 16 KA - 2 Nos f) MCB TPN 63 Amps, 10 KA 415 Volts- 2 Nos g) MCB SPN 40 Amps, 10 KA 415 Volts- 2 Nos g) RYB Indicators - 1 Set Note - The lay out drawing of the panel shall be submitted and got approved from accepting officer by the contractor before panel fabrication.

All as per item no 01 but with the following acessories a) Copper bus bar 600 Amps for 3 phase and 300 Amps for Neutral b) MCCB FP 400 Amps 415 Volt 35 KA - 1 Nos c) MCCB TP 250 Amps 415 Volt 25 KA - 2 Nos d) MCCB TP 160 Amps 415 Volt 25 KA - 1 Nos e) MCCB TP 100 Amps 415 Volt 16 KA - 2 Nos f) MCB TPN 63 Amps, 10 KA 415 Volts- 2 Nos g) MCB SPN 40 Amps, 10 KA 415 Volts- 2 Nos g) RYB Indicators - 1 Set Note - The lay out drawing of the panel shall be submitted and got approved from accepting officer by the contractor before panel fabrication.

All as per item no 01 but with the following acessories a) Copper bus bar 900 Amps for 3 phase and 450 Amps for Neutral b) MCCB FP 630 Amps 415 Volt 35 KA - 1 Nos c) RYB Indicators - 1 Set Note - The lay out drawing of the panel shall be submitted and got approved from accepting officer by the contractor before panel fabrication.

M&L for earthing complete with Galvanised Iron earth plate electrode 600x 600x 3 mm buried directly in ground with top edge of the plate not less than 1.5 mtrs below normal gound level and connected by means of GI Strip of size 32x6 mm all as specified and shown in electric plate No 3 of MES SSR Part-I 2009 including earthwork, PCC chamber, CI cover, earth lead protection and watering pipe, funnel, mesh etc all as required at site and all as directed and including taking down of old earthing materials Note: (1). 7.5 RM GI strip in deemed to be included in quoted rates beyond 7.5 RM strip shall be measured and paid separately (2) Rate quoted by the tenderer is deemed to include salt & Charcoal upto & above 450 mm top of Copper plate.

S&F GI strip size 32 x 6 mm all as directed includimng welding brazing and taking down of old copper strips as required at site

Excavation in trenches not exceeding 1.5 m wide but exceeding 1.5m in depth of in soft/loose soil for laying/removal of cables, panel foundation, area clearance etc, taking out of cable loop all as specified and directed by Engineer -in Charge

Excavation in trenches not exceeding 1.5 m wide but exceeding 1.5m in depth of in hard/dense soil for laying/removal of cables, panel foundation, area clearance etc, taking out of cable loop all as specified and directed by Engineer -in Charge

Returning filling in , excavated soil including spreading, leveling and well ramming in layers not exc 25cms each any type of soil.

Removing the excavated materials not exc 50mtr and depositing where directed at a level not exceeding 1.5 mtr above the staring point all as directed by Engr - in- Charge.

M&L for PCC 1:2:4 using 20mm graded stone aggregate for Foundation for Panel including necessary foam work, grouting of panel, curing etc all as directed by Engr - in- Charge,

M&L for PCC 1:4:8 using 40 mm graded stone aggregate for area around panel, including necessary foam work, curing,etc all as directed by Engr - in- Charge.

Supply, laying & testing XLPE insulated, sheathed cable galvanized steel strip or wire armoured, electric cables (Heavy duty) with multi stranded aluminium conductor of size 10 sq mm ,4 core, 1100 Volts grade, laid in ground, in wall etc including taking down of old UG Cable all as directed by Engineer-in-Charge

Supply, laying & testing XLPE insulated, sheathed cable galvanized steel strip or wire armoured, electric cables (Heavy duty) with stranded aluminium conductor of size 25 sq mm ,3.5 core, 1100 Volts grade, laid in ground, in wall etc including taking down of old UG Cable all as directed by Engineer-in-Charge

Supply, laying & testing XLPE insulated, sheathed cable galvanized steel strip or wire armoured, electric cables (Heavy duty) with stranded aluminium conductor of size 35 sq mm ,3.5 core, 1100 Volts grade,laid in ground, in wall etc including taking down of old UG Cable all as directed by Engineer-in-Charge

Supply, laying & testing XLPE insulated, sheathed cable galvanized steel strip or wire armoured, electric cables (Heavy duty) with stranded aluminium conductor of size 50 sq mm ,3.5 core, 1100 Volts grade, laid in ground, in wall etc including taking down of old UG Cable all as directed by Engineer-in-Charge

Supply, laying & testing XLPE insulated, sheathed cable galvanized steel strip or wire armoured, electric cables (Heavy duty) with stranded aluminium conductor of size 70 sq mm ,3.5 core, 1100 Volts grade,laid in ground, in wall etc including taking down of old UG Cable all as directed by Engineer-in-Charge

Supply, laying & testing XLPE insulated, sheathed cable galvanized steel strip or wire armoured, electric cables (Heavy duty) with stranded aluminium conductor of size 95 sq mm ,3.5 core, 1100 Volts grade,laid in ground, in wall etc including taking down of old UG Cable all as directed by Engineer-in-Charge

Supply, laying & testing XLPE insulated, sheathed cable galvanized steel strip or wire armoured, electric cables (Heavy duty) with stranded aluminium conductor of size 150 sq mm ,3.5 core, 1100 Volts grade, laid in ground, in wall etc including taking down of old UG Cable all as directed by Engineer-in-Charge

Supply, laying & testing XLPE insulated, sheathed cable galvanized steel strip or wire armoured, electric cables (Heavy duty) with stranded aluminium conductor of size 150 sq mm ,3.5 core, 1100 Volts grade, laid in ground, in wall etc including taking down of old UG Cable all as directed by Engineer-in-Charge

Supply, laying & testing XLPE insulated, sheathed cable galvanized steel strip or wire armoured, electric cables (Heavy duty) with stranded aluminium conductor of size 185 sq mm ,3.5 core, 1100 Volts grade,laid in ground, in wall etc including taking down of old UG Cable all as directed by Engineer-in-Charge

Supply, laying & testing XLPE insulated, sheathed cable galvanized steel strip or wire armoured, electric cables (Heavy duty) with stranded aluminium conductor of size 240 sq mm ,3.5 core, 1100 Volts grade,laid in ground, in wall etc including taking down of old UG Cable all as directed by Engineer-in-Charge

Supply, laying & testing XLPE insulated, sheathed cable galvanized steel strip or wire armoured, electric cables (Heavy duty) with stranded aluminium conductor of size 300 sq mm ,3.5 core, 1100 Volts grade, laid in ground, in wall etc including taking down of old UG Cable all as directed by Engineer-in-Charge

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm, Outdoor type

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 70 to 120 sqmm, Outdoor type

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 150 to 185 sqmm, Outdoor type

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 240 to 300 sqmm, Outdoor type

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 400 sqmm to 500 Sqmm Outdoor type

Supply & lay double wall corrugated pipe class SN4 75 mm dia buried in ground, including passing of cable through the pipe all as directed at site

M&L for wiring complete with 1.5 sq mm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 V grade conforming to IS 694 drawn through steel ERW conduit flame proof, heavy grade ISI marked including nessay conduit accessories surface on wall, ceiling etc including 1.5 sq mm PVC insulated flame retardent copper conductor as in continous earth wire for one FLP light/fan point controlled one way metal clad switch of 5 Amps capacity complete all as specified & directed.

S&F Switch flame proof rotary type with termination box in LM6 , 16A single pole 250 V complet all as specified & directed.

S&F flame proof Junction box in aluminum alloy LM6 construction 4 way with 3/4" ET entries with connectors complete all as specified and directed.

S&F High Bay LED Energy saving 80 W flame proof CMRI certiied recommended for gas/vapor group of IIA & IIIB, Zone 1&2 and environment friendly & re-bust high bay luminaire, heat resistant toughened glass protection with high efficacy suitable for ceiling (surface suspend) including connection up with 1.5Sqmm three core flexible including brackets & clamps, nut bolts etc complete all as specified & directed.

M&L for LT wall mounted Panel Indoor type suitable for mounting in stel tubular column includng necessary brackets, Nut & Bolts for mounting/fixing panel. The Panel shall be made out of 3 mm thick CRCA steel, including powder coating, Din rail making cu for MCB, switch socket combination etc, The Panel shall comprise of the following Acessories :- (a) copper Bus Bar TPN 415 Volts , 100 Amps (b) Panel Indicator R, Y, B - 01 Set (c) MCB TPN 40 Amp 10 KA - 01 Nos (d) MCB SPN 20 Amps, 10 KA -03 Nos (e) MCB SPN 10 Amps, 10 KA -03 Nos (f) Switch Socket Combination 15/16 Amps - 03 Nos (g) Switch Socket Combination 05Amps -03 Nos Note- (i) The panel shall be got fabricated from CPRI approved manufacture specified in PS. (ii) The log out of the panel shall be got submitted and approved by the GE.

M/L for providing earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6mm thick buried directly in ground earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to galvanised earth lead wire 4.00mm dia by means of bolts, nuts, checknuts & washers of GI or steel and connecting to earth dolly all as shown in electrical plate No. 3 of SSR Part I of 1991 & testing complete including 15mm dia light grade GI pipe upto 7.5mtr long, excavation in any type of strata, PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm with frame, test box , funnel, wire mesh with GI watering pipe etc.

Material and labour for providing point wiring with two runs of 1.5 Sqmm multi stranded copper conductor Flame retardant PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core multi stranded copper conductor Flame retardant PVC insulated 1100 Volts grade wire for continuous earthing complete and including PVC conduit with all fittings/fixture etc and open recessed type Plastic Enclosure( Plastic Switch Board ) ISI Marked (IS:14772) for housing switches / sockets all a specified and directed

(a) One light/fan point/ 5Amps independent socket point controlled by one switch .

(d) One 3 pin socket 5 A on the same switch board.

Material and labour for providing point wiring with two runs of 2.5 Sqmm multi stranded copper conductor Flame retardant PVC insulated single core 1100 volts grade & with one run of 2.5 Sqmm single core copper stranded Flame retardant PVC insulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings / fixture etc and open recessed type Plastic Enclosure (Plastic Switch Board) ISI marked (IS 14782) for housing one 15 A Switch / sockets all a specified and directed

M&L for sub main wiring complete with two runs of single core 4 sq mm FRLS PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 4 sqmm single Flame retardan PVC insulated unshedthed multi stranded copper conducator green colour cable for continuous earthing complete in & including PVC casing & caping with all fitting & fixtures all as directed and specified ( Note Two runs of 4 sqmm copper cable and one run of 4 sqm copper cable including PVC casing & caping shall be measured and paid as one length).

M&L for sub main wiring complete with two runs of single core 6 sq mm FRLS PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 6 sqmm single Flame retardan PVC insulated unshedthed multi stranded copper conducator green colour cable for continuous earthing complete in & including PVC casing & caping with all fitting & fixtures all as directed and specified ( Note Two runs of 6 sqmm copper cable and one run of 6 sqm copper cable including PVC casing & caping shall be measured and paid as one length).

Supply and fix switch piano flush type 5 Amp one way. complete all as specified & directed

Supply and fix switch socket combination outlet 2 in 1, 3 pin ,5 A flush type complete all as specified & directed.

Supply and fix socket outlet 2 in 1, 3 pin ,5 A flush type complete all as specified & directed.

Supply & Fix switch Socket combination 3 pin 16 Amps flush type complete all as specified & directed.

S&F Fan regulator electronic step type 230V complete all as specified and directed.

Supply and fix ceiling rose surface type bakelite / PVC three terminal 65 x 50mm complete all as specified & directed.

Supply and fixing LED light fitting 22 W, 220V, AC decorative box type with dirver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.

S&F MCB DB SPN 04 way IP43 IK-09 with metal door suitable for housing of MCBs complete all as directed by Engineer-in-Charge

S&F MCB SPN 6 to 32 Amp 10 KA 240 V C Curve and electric connections with copper thimbles complete all as specified and directed by Engr-in-Charge

S&F MCB SP 240 Volts, 10 KA C Curve MCB Sp 6 to 32 Amps, complete all as specified and directed by Engr-in-Charge

S&F MCB SPN 40 to 63 Amps 10 KA 240 Volt C Curve and electric connections with copper thimbles complete all as specified and directed by Engr-in-Charge.

S&F 4 way, DB double door along with 01 Nos of MCB TPN 63A Metal enclosures including suitable fasteners for mounting in wall as per direction of Eng-in-Charge.

Supply & Fix Highbay LED Energy saving 80 W, environment friendly & robust High bay/Mediumbay LED IP 65 luminaire with high efficacy suitable for ceiling /inclucing all accessories for mounting/fixing in steel truss complete all as specified and directed

M&L for wiring complete with 1.5 sq mm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 V grade conforming to IS 694 drawn through steel ERW conduit flame proof, heavy grade ISI marked including nessay conduit accessories surface on wall, ceiling etc including 1.5 sq mm PVC insulated flame retardent copper conductor as in continous earth wire for one FLP light/fan point controlled one way metal clad switch of 5 Amps capacity complete all as specified & directed.

S&F Switch flame proof rotary type with termination box in LM6 , 16A single pole 250 V complet all as specified & directed.

S&F flame proof Junction box in aluminum alloy LM6 construction 4 way with 3/4" ET entries with connectors complete all as specified and directed.

S&F LED light fitting 2x16 W flame proof CMRI certified recommended for gas/vapor group of IIA & IIIB, Zone 1&2 and IP 65 protection with die cast aluminum housing with het resistant toughened glass with LED tube light fixtures driver holders connector etc complete with all accessories prewired and including connecting up with three core flexibe copper conductor cable with fixing brackets for hanging the fitting in steel truss etc.

Supply and fix Flameproof Heavy duty Exhaust fan, AC Single phase 230 V of size 400 mm sweep with Blade & Frame and louvers, mounting fasteners all as specified, including 1.5 sqmm 3 core flexible copper conductor cable for connection from ceiling rose to fan complete all as specified & directed

M&L for cutting hole of suitable size in stone masonary/brick wall for mounting exhaust fan of given size 400mm sweep and making good the wall surfaces complete all as specified and directed by Engr-in-Charge

Supply and fixing Flameproof Ceiling fan complete with blades, down rods of length upto 1.5m with clamps suitable for steel truss,230V, 1200mm sweep with Blade & Frame complete all as specified & directed

Supply and fixing Ceiling fans complete with blades, down rods, electronic regulator and accessories 230V, 1200 mm sweep. Min air delivery 210 CFM with services vaue 6.00 BEE five star rated with brushless direct current motor (BLDC)

Rama Electricals