Construction of Rural Work Division office Building ,Angul for the year 2025-26-Building

CIVIL WORKS Earthwork in excavation of foundation in hard soil with all leads and lifts including dressing the sides and levelling the bed of the foundation including cost of all labour required for the work etc. complete with all other T &P required for the work and stacking the excavated materials away from the working area as directed by the Engineer-in-Charge including 1% Cess.

Supplying and filling foundation and plinth with sand well watered & rammed with cost, conveyance, royalty and taxes of all materials labour required for the work as per specification and direction of the Engineer-in-Charge including royalty of materials including 1% Cess.

Providing and laying P.C.C (1:3:6) with 40 mm size Hand broken hard granite metal of approved quality from approved quarry including hoisting lowering & laying concrete in layers not exceeding 9" thick to the required level including cost,conveyance & royalty of all materials with all taxes & compacting watering curing & all labour with T & P articles required for the work including 1% cess etc, complete as per specification and direction of the Engineer-in-charge.

R.C.C. M-25 grade having a minimum compressive strength ( in work test ) 250 kg/ sq. cm in 15 cm cubes at 28 days after mixing and tests conducted in accordance with I.S 456 and I.S 516 using 20 mm and down graded size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering , laying and compacting concrete , watering and curing for 28 days, centring, shuttering , finishing the exposed surface including ceiling smooth, providing grooves , beads where necessary and providing required no of fan hooks as directed including cost, conveyance, royalities and taxes of all the materials and cost of all labour, T&P required for the work etc. complete in all respect including 1% cess as per direction of the Engineer in charge but excluding the cost of M.S rods or Tor steel and binding wire and labour charges for bending, binding and tying the grills as per specification and direction of the Engineer-in-charge.a) Column Base

b) Column & Beam Ground Floor

b) Column & Beam First Floor

b) Column & Beam Second Floor

d) Plinth Band

e) Lintel Band Ground Floor

First Floor

f) Chajja Ground Floor

First Floor

Second Floor

g) Roof Beam Ground Floor

First Floor

Second Floor

h) Stair case Ground Floor

First Floor

i) Roof Slab Ground Floor

Ground Floor

Second Floor

j) Window Sill Ground Floor

First Floor

Cutting, streightening the bent up M.S./TS Rods bending, binding, welding, jointing if necessary and tying the grills and placing in position, as required for R.C.C work and for providing required No. of Fan Hooks hoisting, lowering, laying including, cost, conveyance, taxes of all M.S. Rods or Tor steel and binding wires of 118 to 20 gauge required for the work bending, binding and tying the grills in all floors (Payment will be made on weight of M.S. Rods or Tor steel only and no separate payment will be made towards the weight of binding wires) including 1% cess as per direction of the Engineer-in-Charge. Ground Floor

First Floor

Second Floor

Fly Ash bricks masonary (1:6) using 25cm x 12cm x 8 cm size bricks having crushing strength not less than 75 kg/cm2 including splays cutting, circular, moulding and corbelling, champhering and similar such type of works watering and curing etc. complete, including, cost, conveyance, royalities and taxes of all materials and cost of all labour and T & P required for the work etc. complete including 1% cess and as per the specification as directed by the Engineer-in-Charge. a) In Foundation & Plinth

b) In Superstructure Ground Floor

First Floor

Second Floor

Construction of un-reinforced plain cement concrete pavement, thickness as per design, over a prepared base, with 43 grade cement or any other type as per Clause 1501.2.2 M-30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction, expansion and construction joints, applying sealant, admixtures as approved, curing of concrete slabs for 14-days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification as per direction of the Engineer-in-Charge.

2.5cm Damp proof course with CC (1:2:4 ) using 12mm size black hard crusher broken granite chips of approved quality and from approved chips of approved quality and from approved quarry including cost conveyance and royality of all materials with all taxes and all labour with T&P required for the work & 1% cess etc. complete as per direction of the Engineer-in-Charge.

12 mm thick cement plaster(1:6) over brick massonary finished smooth, after racking out the joints including watering, and curing with cost, conveyance, royalities and taxes of all materials, and cost of all labour and T & P required for the work complete including 1% cess as directed by the Engineer-in-Charge.Ground Floor

First Floor

Second Floor

16 mm thick cement plaster(1:6) over brick massonary finished smooth, after racking out the joints including watering, and curing with cost, conveyance, royalities and taxes of all materials, and cost of all labour and T & P required for the work complete including 1% cess as directed by the Engineer-in-Charge.Ground Floor

First Floor

Second Floor

20 mm thick C.P in CM ( 1:4) in grading plaster over roof slab including cost of all labour , material etc complete including 1 % cess & as per direction of Engineer-in-charge.Ground Floor

Second Floor

Supplying,fitting & Fixing Vitrified tiles having thickness 8mm to 10mm of size 60cm x 60cm in floors treads or steps on 25 mm thick bed of cement morta (1:1) with neat cement slury etc including cost, conveyance & taxes of all material, labour etc complete including 1% cess and as per specification and direction of the EIC.Ground Floor

First Floor

Providing and fixing Granite tiles in floors, treads of steps and landing on 25mm th bed of cement mortar (1:1) (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.Ground Floor

First Floor

Providing,supplying,fitting and fixing of 80mm thick interlocking concrete paver block on compacted river coarse sand free from all organic materials and filling the joints with sand including cutting,corbelling, splays whereever necessary to proper size with cost,conveyance,royalities of all materials and as directed by Engineer-in-chief.

Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete as directed by the Engineer-in-charge....Ground Floor

First Floor

Providing factory made 100% Solid WPC (Wood Polymer Composite) Door Frame 125 mm x 65 mm Single Rebated, made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K Value 57-60 ( Suspension Grade 1 Calcium Carbonate Per Run. and Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk ) and Nontoxic additives fabricated with Ft. mater joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ chin , having good screw holding capacity (Screw Withdrawal strength of (Min 990 N) Minimum Compressive Strength of 58 N/mm2. Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof, water/Moisture Proof & Fire retardant & Fixed in position with $5 Dash Fasteners/Hold Fast of required dia and length. all as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company (Hold Fast or Dash Fasters shall be paid separately).. Ground Floor

First Floor

Supplying and fitting-fixing of Un-plasticised poly vinyl chloride (UPVC). Casement Door - 60- Series duly manufactured using UPVC reinforced profiles of 60mmx55mmx2.5mm for outer frames, 102mmx60mmx2.25mm for casement door sash profile and 74mmx60mmx2.5mm mulion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated and welded through fushion welding the door sash shall be fitted with 12mm thick WPC board of green play make duly fixed with EPDM wheathering seal resistance accessories like clipping locking system made of aluminium 1 No per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site etc, including cost and conveyance of all materials, accessories , labour charges, materials and product confirming to ASTM D 638 -14, EN-477-95 and other applicable codes and standards.Ground Floor

First Floor

Supplying, Fitting and fixing M.S. door and windows.etc complete as directed by the Engineer-in-charge..Ground Floor

First Floor

Second Floor

Supplying, Fitting and fixing M.S. grills of flat etc. complete as directed by the Engineer-in-charge...Ground Floor

First Floor

Finishing surface of walls with cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding, staging charges with cost of all materials taxes, labour T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge....Ground Floor

First Floor

Second Floor

Wall priming one coat with approved primer with brush to wall surface including all cost, conveyance, taxes of all the materials , all labour and T&P required for the work etc. complete including 1% cess as per direction of the Engineer in charge Ground Floor

First Floor

Second Floor

Wall painting two coats with plastic emulsion paint of approved shade on new work to give an even shade with approved shade with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge....Ground Floor

First Floor

Second Floor

Weather coat two coats including cost, conveyance, taxes of all materials all labour and T & P required for the work etc complete including 1% cess as per direction of the Engineer in charge GF

First Floor

Second Floor

Painting two coats over a coat of primer on M.S. shutters and grill work with any approved enamel paint including cost of all materials etc. complete GF

First Floor

Second Floor

Providing fitting and fixing of false ceiling with aluminium anodised T section no. 3215 with 2' - 0" center to center, L section no. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and PVC plug and the aluminium grid 2'- 0" x 2' - 0" with card board suspended from ceiling including cost of all materials, taxes, labour, T&P, cess, and hire charges of drilling machine, labour charges etc. complete in all respect as per specification and direction of the Engineer-in-charge........Ground Floor

First Floor

Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures etc. complete in all respect as per specification and direction of the Engineer-in-charge.........GF

First Floor

Providing , fitting & fixing Steel Angle Iron doors & windows frame with M.S grill manufactured from standard rolled steel angle section 50 mm X 50 mm X 6 mm cornered of the frame duly metered and electrically welded with fish tail hold fasts made out of M.S flats of size 200 mm X 50 mm X 30 mm wide & 5 mm thick at the rate of 4 nos per frame with M.S hinges of size 75 mm & 14 SWG thick at the rate of 3 nos for each single leaf shutter tower bolt ring & M.S Grills made out of 19 mm x 5 mm flat properly welded to the window frame with one coat of anti corrosive red oxide zinc chrome primere as per direction of Engineer - in - Charge 1% cess and 12% GST .

Supplying fitting and fixing of Stain less steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90mtr c/c and stain less square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. including cost of all materials, taxes, labour, T&P, cess, and hire charges of drilling machine, labour charges etc. complete in all respect as per specification and direction of the Engineer-in-charge..............GF

First Floor

Earth work in all kinds of soil including rough dressing and leveling the bed etc. complete etc Complete.

Dismantling G.C.I. or A.C. sheet roofing after carefully removing the bolts and nuts including stacking of the materials for reuse and removing the debris within 50m lead etc. complete as directed by the Engineer-in-charge.

Dismantling and removing R.C.C. columns beams slab staircase landing lintels including stacking the useful materials for reuse and removing the debris within 50m lead etc complete as directed by the Engineer-in-charge.

Dismantling wrought and framed timber in roof frame work of floors after careful removal of nail, bolts etc. and stacking of the materials for reuse and removing the debris within 50m lead etc complete as directed by the Engineer-in-charge.

Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead etc. complete as directed by the Engineer-in-charge.

Dismantling brick or stone masonry in lime or cement mortar under 3m. height including stacking the useful materials for reuse and removing the debris within 50m. Lead etc complete as directed by the Engineer-in-charge.

ELECTRICAL WORKS Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire = Finollex / L & T/ Anchor/ Havels/ V-Guard/ Greatwhite / Polycab) Group A (1.1.1)

-do- .... Group B (1.1.2)

-do- .... Group C (1.1.3)

S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 2 Modular box with base & cover (1.24.2)

4 Modular box with base & cover (1.24.3)

6 Modular box with base & cover (1.24.4)

8 Modular box with base & cover (1.24.5)

12 Modular box with base & cover (1.24.6)

S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4)

S/F of 6 Modular GI box in recess with suitable size of Modular base cover in front including providing and fixing 2 nos 3 pin 5/6 amp. Modular Socket out let & 5/6amp. Modular type switch,connection,painting etc. as required.(2X1.25.1+2X1.25.4)+6 MODULE

S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required (1.25.3+1.25.5)+4 MODULE BOX

S/F of computer board (Modular Type) consisting of 3 nos. of 5 amp plug and switch and 6 amp MCB, Indicator complete with wiring on 12 module M.S.box with B.k.cover(1.24.6 + 3 x (1.25.1+ 1.25.4) + 2.6.1)+Indicator

Wiring for circuit I sub main wiring alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS- 694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required ( Make of wire- Finolex/ / Anchor/ Havels/ V-guard / HPL / L&T / Gratewhite / Polycab). -do- 2x1.5sqmm +1x1.5sqmm ( 1.8.1 )

-do-2x2.5sqmm +1x1.5sqmm ( 1.8.2 )

-do- 2x4sqmm +1x1.5sqmm ( 1.8.3 )

-do- 2x6sqmm +1x2.5sqmm ( 1.8.4 )

-do- 4x6sqmm +2x2.5sqmm ( 1.8.10 )

S/Fof 'B' series SP MCB of 5A to 32 Amp rating 240Volt "B" series MCB for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP)(2.6.1)

S/F of 63 Amp Four Pole MCB C Series (Make: L&T/Havells/C&S/Equivalent

S/F of 40 Amp rating "C" Series DP MCB (Make: L&T/Havells/C&S/Equivalent)

S/F of following 8way single door and neutral sheet steel MCB DISTRIBUTION BOARD 250v on surface /recess complete with tinned copper bus bar, neutral bar, earth bar, din bar ,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (except MCB) 2.3.2

S/F of following 16way Double Door and neutral sheet steel MCB DISTRIBUTION BOARD 250v on surface /recess complete with tinned copper bus bar, neutral bar, earth bar, din bar ,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (except MCB) 2.3.8

S/F of Call bell/ Buzzer ISI marked sutiable for DC/AC single Phase 230 volts complete as required.(1.30)

S/F of batten holder BK angle holder ISI marked including connection etc instead of ceiling rose (Make: Cona / Anchor / Havells / Greatwhite / Preeti / HPL) (1.29-1.28)

Earthing with 40mm size G.I. Pipe copper plate and with copper flat (1.15Kg. Per Mtr.) G.i. pIPE 40MM Heavy duty 2.7 mtr , Electrolytic Grade(Cu-ETP)(Grade: C 101), coated with Tin and annealed copper plate size 600X600X3.15 mm-10.5kg, G.I. funnel covered with wireness duly fabricated and welding with G.I. Pipe-1 no., Clamp made out of 40x6mm GI Flat-3 set, Febrication of GI Pipe copper plate and copper flat for a) Perporated hole-18 no. , b) threaded hole-12 no. , Charcoal-64 kg, common salt-5kg, C.I. hinged top cover-1 no. , Nut, bolt and washer-12 sets, exacavation of Earth size- 1.35mmX 0.75MMX3mm. Construction of earthing chamber pit size:- 22"X22:X18".-3..375MM

Providing and fixing 8 SWG copper wire in recess for loop earthing as required. (3.18)

S/F of 1200mm A.C. Ceiling fan (1Star) with all accessories and connections with out fan regulator (Make:Usha-Striker One/Neo/Crompton- highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS)

S/F of electric step ceiling fan regulater in existing switch box including connection with 1.5sqmm FR PVC insulated single core multistrand copper conductor earthing the regulator as required.(1.38)

S/F of Fan hok S'type made of 16mm MS rod as per specificationn

S/F of 60 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton/Phillips/HPL/Polycab/Havells )

S/F of 18-25 watt LED Tube light fitting compoete with all connection.\ including fixing and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL)

S/F of 12 Watt Ceiling Light Recessed Mount or Surface Mount(Round or Square )Type(Make Havells/Crompton/Polycab or Equivalent)

S/F of 24 Watt Recessed Mount or Surface Mount Panel Light In Weight aluminium Body ( Round or Square )Type Ceiling Light (Make Havells or Equivalent)

Supply of instalation, Testing commissioning of 12 Watt. LED bulb

S/F of 15A modular socket on 2 Modular Metal box for A.C

S/F of 32A C series D.P. MCB for A.C (make: Legrand/Anchor/Havels/HPL)

S/F of 25A Moter Starter switch for A.C (Make: Havells / Anchor/Le-Grand)

S/F of 300 Exhaust fan with all accessoriesand connections (Make Usha-Aero Clean Plus DBB/ Polycab-Fresh on DBB/ Cropmton-Trans Air12" reversible/ Havells-Ventil Air DS(HS)/ Anchor-Anmol Delus R/ Orient-Power Flow DBB)

wiring to sub main with 1*1.5 mm2 single core multi strand copper wire for inverter wiring (1x1.5mm)

MAIN DB Supply & fixing of 100A TPN Panel board 1. 100A 4P 25KA MCCB with Spreader,rotary handle, and UV relaease(Make- Legrand/Seimens/L&T/C&S)-1 No 2.100A Change over(Manual)-1 No 3. 100A COPPER bus bar- 2set (one for light load & one for power load) 4.63A 4P MCB-8Nos. 5.SPD(Type1+2,50kA,3P+N)-1No 6.40A DP MCB- 4 nos 8. Digital Volt meter & Ameter three phase-2Nos 9. All accesories & Connection (Rating & Danger borad)

Provn. of 3 1/2 x 35 sqmm Armoured Cable with all connections

Laying of 35sq mm. 3½ Core cable on surface(5.5.2)

Laying of 35sq mm. 3½ Core cable in ground(5.1.2)

Supplying and making end termination with brass compression gland and aluminum lugs for 35sq mm. 3½ Core cable(5.8.21)

P.H. works Internal PH Work Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge ...Ground Floor. 20mm dia C-PVC pipe (Ashirbad/Supreme)

25mm dia C-PVC pipe (Ashirbad/Supreme)

32mm dia C-PVC pipe (Ashirbad/Supreme)

Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge...250mm thick wall in Ground floor

In 1st Floor

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground Floor

In 1st Floor

Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge...15mm dia CP Long Body Bib cock (Jaquar)

15mm dia CP short Body Bib cock (jaquar)

15mm dia CP angle stop cock (jaquar)

20mm dia CP consealed stop cock (jaquar)

15mm dia CP two in one bib cock (jaquar)

15mm dia CP Health faucet (jaquar)

15mm dia CP extension piece 50 mm long

15mm dia CP Pillar cock (jaquar)

25mm dia Brass or Gun Metal Ball Valve

32mm dia Brass or Gun Metal Ball Valve

125mm dia CP gratings

15mm dia CP revolving shower (Plaza deluxe make)

Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge....10 litres PVC L.L. Cistern

Supplying all materials, labour, Tand P and fitting and fixing U PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592 or 1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturer specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge 75mm dia U PVC SWR pipes(Supreme Ashirvad)

75mm U-PVC plain bend

110mm dia U-PVC SWR pipes(Supreme/Ashirvad)

110mm U-PVC door bend

110mm U-PVC door Tee

110mm U-PVC plain Tee

110mm dia U-PVC offset without ear

110mm U-PVC plain bend

110mm U-PVC vent cowl

110mm dia U-PVC 'P' trap

110mm dia U-PVC socket plain

75mm dia U-PVC socket plain

PVC Clamp

110mm U-PVC door cross Tee

Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan Orissa pattern squatting pan conforming to IS:2556-part-3-2004) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI P or S trap (with without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge(Nycer,parryware make) 580x 410 mm size Orissa pan(Hindware Parryware Neycer)

Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the Engineer in charge Flat Back lipped wall urinal [Medium] 380x580x350

15mm dia Urinal spreder

32mm dia Dome wate

15mm dia CP Auto closing Urinal Flush Valve (PRS-CHR-077 Jaquar make)

Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral S or P trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge Wall Mounted water closet seat cover (Parryware Hindware Neycer)

Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered Hot and Cold with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge 550mm x 400mm size W. H. Basin with Porcelain Pedestal (Parryware Hindware Neycer)

Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge...Fixing of Glass Mirror 600mmx450mm size B.E mirror (fixed type)

450mmx125mm size plate Acrylic shelf

Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge...Fixing of 25mmx600mm long CP towel rail (Plaza/Amber/Aquatic)

CP towel Ring (Plaza/Amber/Aquatic)

Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge...CP soap holder (Plaza/Amber/Aquatic)

CP liquid soap holder

EXTERNAL PH WORK Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,250mmx250mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge...Gully Trap chamber (0.25 x 0.25 inside Size)

Supplying all materials, labour, T&P and constructing Inspection Chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge....Inside size 760mm x 760mm x 460mm

Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. Construction of Soak way Pit Construction of Brick Soak way Pit (1.2m dia x 2.0m Deep)

Construction of RCC Ring Soak way Pit (1.22m dia x 2.0m Deep)

Supplying all materials, labour, T&P and laying in trenches 4kg/cm2 U-PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, earthwork in excavation in trenches in all kinds of soil, refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C. Laying of 100 mm dia S.W Pipe line Haunch top

SINKING OF TUBEWELL...Sinking of 200mmx150mm dia Bore Well through DTH method.- 1 No. Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only....Drilling of 200mm dia bore 0 to 30 mtr

Drilling of 200mm dia bore 31 to 45 mtr

Drilling of 150mm dia bore 41 to 125 mtr

Labour for lowering the following size of PVC casing pipes with or without slotted pipes as per necessity from ground level upto 300 mtrs depth and fitted and set up in perfectly vertical position including cutting and threading of blank pipes and slotted pipes and supplyinging and fixing of all jointing materials ,extra sockets and T&P etc. all complete and keeping the top of casing pipe threaded including plugging the tubewell to prevent entry of foreign materials..Lowering of 200mm dia PVC casing pipes 0 mtr to 30 mtrs

Lowering of 200mm dia PVC casing pipes 31 mtr to 45 mtrs

Cost of 200mm dia PVC schedule - 80 pipe

Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge

Sanitary sealing upto 5 mtr below ground level

CC(1:2:4) with 12mm chips for grouting up to 5 mtr Depth in

Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge...2HP Three Phase 5 stage submersible pump set.

DOL control panel

50mm S. S. Nipple, S. S. bolt & clips

50mm M. S. Clamp, Bend, Socket & 200mm M. S. well cap

2.50mm Sqm Submersible flat cable

Steel rope with cover

20mm dia rigid U-PVC pipe

40mm dia HDPE pipe

Labour charges for lowering, testing, commissioning & transportation to site etc.

Supplying all materials, labour, T&P and providing and laying in trenches PVC ASTM pipe of the following nominal bore, tube fittings, testing all complete as per specification and direction of the Engineer in charge 50mm dia PVC ASTM

Construction 1 No 30 users RCC Septic tank Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. Initial lift upto 1.5 mtr

From 1.5 mtr to 3.0 mtr depth

Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C.

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials,labour, T&P and providing Brick work with K.B.Brick having crushing strength not less than 75 Kg/CM2 with dimensional tolerence of +/- 8% in C.M including watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C...In Foundation and Plinth in C:M (1:4)

Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C....12 mm thick C.P in C:M (1:3)

Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C....Same as above item 20mm C.P in 1:3

Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing Reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and making M.S. Step Iron in 20mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C. baffle wall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing 160mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded in P.C.C(1:1.5:3) using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the Engineer-in-charge.

Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C.

PVC tank-2000 Ltr capacity Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tankconforming to 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.L and placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 2000 Ltr capacity PVC Tank (Sintex make).

Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. Staging for 2000 Ltr capacity PVC Tank .

CERAMIC FLOOR TILES Providing and laying CERAMIC FLOOR TILES of premium grade and of approved size & shade in flooring on a bed of 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand) finished with flush pointing in white cement & pigment to match the shade of the tiles.Ground Floor

First Floor

CERAMIC WALL TILES Supplying, fitting & fixing of Ceramic wall tiles of premium grade of size 300x200/200x200mm having thickness 6.5mm to 6.7mm confirming to IS 13753 in dadoes, skirting and risers of steps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge ..Ground Floor

First Floor

FRP DOOR SHUTTER Factory made GIRID FRP or called GRP sandwich composite door shutter of 32mm thick laminated with two GRP skin with good grain finish fabricated using UV stabilised isoppthalic gel coat and one layer of 450 gsm E-glass chopped strand mat (CSM) impregnated with ortopathilic resin The thickness of the skins shall not be less than 1.50mm . Expanded polysryne ( EPS) structural foam panel of 29 mm tickness and a density of 20kg/cu.mts shall be used as core material wooden reinforcements made of sesasoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fitting the metal fittings such as lower bolts ,aldrops, handles etc. shall be provided . A structural adhesive compatible with (EPS)foam shall be used for bending the core material. the sal wood reinforcements and the skin The material and process for manufactuing te door shutter shall conform to RV -TIFAC components design centre's standards and specification and the door shutters tested in conformation to IS 4020-1998. The Finish of door shutter will be plain colour as per specification and direction of the Engineer in Charge. etc. complete

FRP DOOR FRAME Factory made FRP( Altematly called GRP) door frame of size 75mm x 100mm fabricated using E - glass chopped strand mat (CSM) U.V stabilised inopathalic Gel coat and impregnated with inopathalic resin The thickness of the GRP skins shall not be less then 2.0 mm . The door frame consists of four segments which are provided with plug in socket arrrangement in-situ-in mould. The segments are plugged in and are joined together by means of srew. The GRP frame shall be provided with wooden reinforcement on six locations for high srew holding capacity for fixing metalic hold fast and shall be consolidated by filling with medium density foam / plaster of paris with fibre reinforcement , six number of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the finish of door frame shall conform to RV-TIFAC composites Design centre's standards and specifications . The finish of door frame will be plain colour white /Ivory/Beige/Light grey / Golden brown / Mahogany/ Teak wood /sand stone Champagne/Pastel blue or any other colour using high quality pigment complete in all respect as per specification and direction of the Engineer in Charge. etc. complete.

Please Enable Macros to View BoQ information