Construction of Toilets at Heritage Centre HAL Bangalore

HINDUSTAN AERONAUTICS LIMITED BANGALORE FACILITIES MANAGEMENT DIVISION

NAME OF THE WORK: Construction of Toilets Heritage Centre, HAL [Bangalore]. CONTRACT NO. HAL/FMD/C-108A/25-26

Name of the Contractor :

Sl. No. Specification Quantity Unit Rate in Figs [Excluding GST] Rate in Words Amount

Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act. (2) L1 (lowest quote) will be determined based on the total quoted amount including GST. (3) This BOQ specification has to be read in conjunction with relevant CPWD specifications amended upto date/ detailed technical specification in tender document and tender drawings if any.

Part - I [Civil Works]

1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas in all kinds of soft / hard soil for foundations, footings, column pedestals or members as per the drawing etc., (exceeding 30cm in depth, 1.50m in width as well as 10Sq m on plan) including removal of vegetation and in-equalities, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, levelling, ramming the bottom of excavation, getting out and disposal of excavated earth lead upto 50m and lift upto 1.50m with all labour, tools & tackles, plant & machinery, hire & fuel charges, etc., all complete as directed by Engineer-in-Charge. 250.00 Cu m 172.70 Rupees One Hundred Seventy Two and Seventy Paise Only 43175.85

2 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas in all kinds of soft / hard soil for foundations, footings, column pedestals or members as per the drawing etc., (exceeding 30cm in depth, 1.50m in width as well as 10Sq m on plan) including removal of vegetation and in-equalities, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, levelling, ramming the bottom of excavation, getting out and disposal of excavated earth lead upto 50m and lift from 1.50m to 3m with all labour, tools & tackles, plant & machinery, hire & fuel charges, etc., all complete as directed by Engineer-in-Charge. 20.00 Cu m 296.08 Rupees Two Hundred Ninety Six and Eight Paise Only 5921.69

3 Returning / filling in with useful excavated soil (excluding rock), free from salts, organic or other deleterious matter (Other than black cotton soil & rock, etc., in trenches, plinth, sides of foundations, etc., spreading in layers not exceeding 20cm thick, watering, breaking / removing clods exceeding 50mm, ramming and consolidation of each deposited layer etc., with all labour, tools & tackles, plant & machinery, etc., lead upto 50m and for all lifts, etc., all complete as directed by Engineer-in-Charge. 85.00 Cu m 190.71 Rupees One Hundred Ninety and Seventy One Paise Only 16210.51

4 Disposal of moorum / building rubbish / malba / similar unserviceable, dismantled or waste material by mechanical transport including loading, unloading, transporting to approved municipal dumping ground for lead up to 10Km for all lifts, etc., all complete as directed by Engineer-in-Charge. Note: Item to be aqpplicable in urban areas having directions for restricted hours / movement plying of load carrying motor vehicle of 3.50Cu m or more. 180.00 Cu m 480.76 Rupees Four Hundred Eighty and Seventy Six Paise Only 86537.29

5 Supplying, mixing and placing plain cement concrete (1:3:6) (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate) of required thickness using 40mm down graded hard stone / granite aggregate in accordance with IS 456 in foundations, mass concrete, sub bases and other similar works including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions, etc., but excluding the cost of centering, shuttering and finishing, etc., all complete as directed by Engineer-in-Charge. 26.00 Cu m 6984.92 Rupees Six Thousand Nine Hundred Eighty Four and Ninety Two Paise Only 181608.02

6 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads but excluding the cost of centering, shuttering and finishing as per direction of the Engineer-in-Charge for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.

a) All works up to plinth level using concrete of M25 grade with minimum cement content of 330 Kgs / Cu m including necessary openings and packing if any for laying pipes, cables, etc., 36.00 Cu m 9248.12 Rupees Nine Thousand Two Hundred Forty Eight and Eleven Paise Only 332932.27

b) All work above plinth at all levels using concrete of M25 grade with minimum cement content of 330 Kg / Cu m including necessary openings and packing if any for laying pipes, cables, etc., 38.00 Cu m 9594.17 Rupees Nine Thousand Five Hundred Ninety Four and Sixteen Paise Only 364578.44

7 Providing and laying of reinforced cement concrete in kerbs, steps and the like at or near ground level excluding the cost fo centering, shuttering, and reinforcement with 1:1.5:3 ( 1 cement, 1.5 coarse sand ( Zone -III derived) from natural sources : 3 graded stone aggregates 20mm nominal size derived from natural resources, etc., all complete as directed by Engineer-in-Charge. 3.50 Cu m 8583.47 Rupees Eight Thousand Five Hundred Eighty Three and Forty Six Paise Only 30042.13

8 Supplying of chemical emulsion chlorpyriphos / lindane emulsifiable concentrate of 20% in sealed containers including delivery as speificed to site, etc., all complete as directed by Engineer-in-Charge. 65.00 Ltrs 228.42 Rupees Two Hundred Twenty Eight and Forty One Paise Only 14846.99

9 Diluting and injecting chemical emulsion for post constructional antitermite treatment (excluding the cost of chemical emulsion): Along external wall where the apron is not provided using chemical emulsion @ 7.50 Litres / Sq m of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding, etc., complete With Chlorpyriphos / Lindane E.C. 20% with 1% concentration, etc., all complete as directed by Engineer-in-Charge. Note: A performance guarantee bond for 10 years on non-judicial stamp paper of Rs. 500/- shall be given by the contractor. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 10 years from the date of completion of contract / project as a whole. 120.00 R m 37.85 Rupees Thirty Seven and Eighty Four Paise Only 4541.69

10 Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: 2.35.2.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration, etc., all complete as directed by Engineer-in-Charge. Note: A performance guarantee bond for 10 years on non-judicial stamp paper of Rs. 500/- shall be given by the contractor. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 10 years from the date of completion of contract / project as a whole. 80.00 R m 52.01 Rupees Fifty Two Only 4160.68

11 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300mm apart including drilling 12mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: 2.35.3.1 With Chlorpyriphos / Lindane E.C. 20% with 1% concentration, etc., all complete as directed by Engineer-in-Charge. 115.00 Sq m 301.68 Rupees Three Hundred One and Sixty Seven Paise Only 34692.97

12 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 6 graded stone aggregate 20mm nominal size Recycled Concrete Aggregate (RCA) over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth, etc., all complete as directed by Engineer-in-Charge. 80.00 Sq m 729.07 Rupees Seven Hundred Twenty Nine and Six Paise Only 58325.42

13 Supplying, fabricating and providing of steel reinforcement for RCC work including straightening , cutting, bending and placing in position all complete up to plinth level using Thermo mechanically treated bars of Fe-500 D or more, etc., all complete as directed by Engineer-in-Charge. 2700.00 Kgs 104.94 Rupees One Hundred Four and Ninety Four Paise Only 283339.83

14 Supplying, fabricating and providing of steel reinforcement for RCC work including straightening , cutting, bending and placing in position all complete for the works above plinth level using Thermo mechanically treated bars of Fe-500 D or more, etc., all complete as directed by Engineer-in-Charge. 10700.00 Kgs 104.94 Rupees One Hundred Four and Ninety Four Paise Only 1122865.25

15 Supplying and Providing of brick work with common burnt clay F.P.S ( non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V in all shapes and sizes using cement mortar 1:4 (1 cement : 4 coarse sand), etc., all complete as directed by Engineer-in-Charge. 51.00 Cu m 9092.05 Rupees Nine Thousand Ninety Two and Five Paise Only 463694.59

16 Providing , Centering and shuttering including strutting, propping etc. and removal of form work, etc., all complete as directed by Engineer-in-Charge.

a) Foundations, footings, bases of columns, etc., for mass concrete. 80.00 Sq m 381.56 Rupees Three Hundred Eighty One and Fifty Five Paise Only 30524.75

b) Walls (any thickness) including attached pilasters, butteresses, plinth and string courses, etc., 240.00 Sq m 819.75 Rupees Eight Hundred Nineteen and Seventy Five Paise Only 196741.02

c) Suspended floors, roofs, landings, balconies and access platform. 100.00 Sq m 902.21 Rupees Nine Hundred Two and Twenty One Paise Only 90221.19

d) Lintels, beams, plinth beams, girders, bressumers and cantilevers. 250.00 Sq m 716.52 Rupees Seven Hundred Sixteen and Fifty One Paise Only 179129.24

e) For columns, pillars, piers, abutments, posts and struts. 120.00 Sq m 935.35 Rupees Nine Hundred Thirty Five and Thirty Four Paise Only 112241.69

17 Providing and fixing of steel work welded in built up sections / framed work including cutting, hoisting, fixing in position and applying a priming coat of apporved steel primer using structural steel, etc., as required for gratings, guard bars, railings, brackets and similar works required patterns / designs in frames for doors, with MS flats, square or round bars, etc., including priming coat with apporved steel primer, etc., all complete as directed by Engineer-in-Charge. 140.00 Kgs 167.94 Rupees One Hundred Sixty Seven and Ninety Four Paise Only 23511.69

18 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket, etc., Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, etc., all complete as per architectural drawings and the directions of Engineer-in-Charge. (Glazing, paneling and dash fasteners to be paid for separately and Powder coated aluminium (minimum thickness of powder coating 50 micron) For Fixed portion like Frames of windows,ventilators, partitions, doors, etc., 120.00 Kgs 516.57 Rupees Five Hundred Sixteen and Fifty Six Paise Only 61988.14

19 For shutters of doors, windows and ventiliators including providing and fixing of hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required using powder coated aluminum sections of coating not less than 50micron, etc., all complete as directed by Engineer-in-Charge. 60.00 Kgs 617.32 Rupees Six Hundred Seventeen and Thirty Two Paise Only 37039.32

20 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions, etc., with EPDM rubber / neoprene gasket, etc., all complete as per the architectural drawings and the directions of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/Sq m) 20.00 Sq m 1464.61 Rupees One Thousand Four Hundred Sixty Four and Sixty One Paise Only 29292.20

21 Providing and fixing of factory made precast RCC perforated drain covers having concrete strength not less than M-25 of size [1000 x 450 x 50]mm reinforced with 8mm dia four nos longitudinal and 9 Nos cross sectional TMT hoop bars including providing 50mm dia perforations @100 to 125mm c/c including providing edge binding with M.S. flats of size [50 x1.60]mm, etc., all complete as directed by Engineer-in-Charge. 45.00 Nos 1362.15 Rupees One Thousand Three Hundred Sixty Two and Fifteen Paise Only 61296.86

22 Providing and fixing Hard wood (SAL) for frames of doors, windows, hand rails, frame work for partitions cut to shape and required curvature and preparing the surfaces to receive the polishing fixed in position with hold fast lugs / with dash fasteners of required dia & length / SS Screws at all heights, with necessary moisture content test, etc., all complete as directed by Engineer-in-Charge. (Fastners/hold fasts/SS Screws to be paid separately) 0.22 Cu m 113374.25 Rupees One Lakh Thirteen Thousand Three Hundred Seventy Four and Twenty Five Paise Only 24942.34

23 Providing and fixing 35mm thick flush door shutters conforming to IS :2202 (Part I) non-decorative type of approved brand / make, core of block board construction with frame of 1st class hard wood & lipping with 2nd class teak wood battens 25mm minimum depth on all edges and well matched commercial 3ply veneering with vertical grains or cross bands including ISI marked Stainless Steel butt hinges with necessary screws and face veneers on both faces of shutters, etc., all complete as directed by Engineer-in-Charge. 6.00 Sq m 2777.92 Rupees Two Thousand Seven Hundred Seventy Seven and Ninety One Paise Only 16667.49

24 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door / window / Clerestory windows & other Frames / Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/Cu m, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite / borer proof, water / moisture proof and fire retardant and fixed in position with M.S hold fast / lugs / SS dash fasteners of required dia and length, etc., all complete as directed by Engineer-in-Charge. 75.00 R m 922.11 Rupees Nine Hundred Twenty Two and Eleven Paise Only 69158.26

(M.S hold fast / lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door / window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size [50 x 100]mm

25 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/Cu m and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite / borer proof, water / moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, etc., all complete as directed by Engineer-in-Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)- 30mm thick. 22.00 Sq m 4229.34 Rupees Four Thousand Two Hundred Twenty Nine and Thirty Three Paise Only 93045.46

26 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates, etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts, etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-Charge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners, etc.,) 40.00 Kgs 751.54 Rupees Seven Hundred Fifty One and Fifty Four Paise Only 30061.69

27 Supplying, mixing, laying 40mm thick cement concrete flooring of (1:2:4), using 20mm and down graded granite aggregates finished with a floating coat neat cement including cement slurry, etc., all complete as per specifications and as directed by the Engineer-in-Charge. 130.00 Sq m 597.62 Rupees Five Hundred Ninety Seven and Sixty One Paise Only 77690.42

28 Providing and laying of Vitrified tiles matt / anti skid finish of Size of Tile [600 x 600]mm in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/Sq m including grouting the joints with white cement and matching pigments, etc., The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily, etc., all complete as directed by Engineer-in-Charge. 130.00 Sq m 1425.30 Rupees One Thousand Four Hundred Twenty Five and Twenty Nine Paise Only 185288.56

29 Providing, applying and laying 12mm thick cement plaster work in for internal / External areas of Ceilings, Chajjas, etc., in CM (1:4) including forming grooves not exceeding 10mm wide and not exceeding 10mm deep as per requirement as directed including preparation of surface by hacking, etc., at all levels with necesary materials, labour, scaffoldings, curing, tools and tackles, plants etc., threading if any as directed, etc., all complete as directed by the Engineer-in-Charge. 460.00 Sq m 337.68 Rupees Three Hundred Thirty Seven and Sixty Seven Paise Only 155331.86

30 Providing, applying and laying 18mm thick cement plaster work in two coats for external areas as directed. First coat 12mm thick in cement mortar (1:5) made rough to recieve top coat, second coat 6mm thick in cement mortar (1:6), final surface finished with a floating coat of neat cement after necessary preparation of surface, at all levels including supply and fixing of hexagonal chicken mesh minimum 150mm wide having opening [20 x 20]mm of 26 gauge at juncitons of concrete & brick work or between different material, with necesary materials, labour, scaffoldings, curing, tools and tackles, plants etc., threading if any as directed, etc., all complete as directed by the Engineer-in-Charge. 300.00 Sq m 504.55 Rupees Five Hundred Four and Fifty Five Paise Only 151365.25

31 Extra for providing and mixing of water proofing material in cement plaster work in proportion recommednded by manufacturer, etc., all complete as directed by Engineer-in-Charge. 40.00 Per bag of 50 kg cement used in mix 21.50 Rupees Twenty One and Fifty Paise Only 860.00

32 Extra for providing and mixing of water proofing material in cement concrete work in doses by weight of cement as per manufacturers specification, etc., all complete as directed by Engineer-in-Charge. 40.00 Per bag of 50 kg cement used in mix 17.66 Rupees Seventeen and Sixty Six Paise Only 706.44

33 Finishing walls with ist quality Acrylic distemper (ready mixed) having VOC content less than 50 grams / Ltr of approved make and manufacturer and of required color and shade to complete achive even shade a and colour for New work (Two or more coats over and including water thinnable priming coat with cemnt primer having VOC content less than 50 grms / litre, etc., all complete as directed by Engineer-in-Charge. 240.00 Sq m 180.64 Rupees One Hundred Eighty and Sixty Three Paise Only 43352.54

34 Finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade, New work [two or more coats applied at 1.43 ltr/10Sq m over and including priming coat of exterior primer applied at 0.9 ltr/Sq m, etc., all complete as directed by Engineer-in-Charge. 320.00 Sq m 166.48 Rupees One Hundred Sixty Six and Forty Eight Paise Only 53274.58

35 Providing and applying white cement based putty of average thickness 1mm of apporved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth, etc., all complete as directed by Engineer-in-Charge. 320.00 Sq m 151.84 Rupees One Hundred Fifty One and Eighty Three Paise Only 48588.47

36 Providing and laying Integral cement based water proofing treatment With average thickness of 120mm and minimum thickness at khurra as 65mm including preparation of surface as required for treatment of roofs, (a) Applying a slurry coat of neat cement using 2.75 kg/Sq m of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-Charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks / brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge over 20mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of junctions of walls and slabs. 100.00 Sq m 1639.12 Rupees One Thousand Six Hundred Thirty Nine and Eleven Paise Only 163911.86

(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ Sq m of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge. d) Finishing the surface with 20mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of [300 x 300]mm square 3mm deep.

(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge. Note: (i) A performance guarantee bond for 5 years on non-judicial stamp paper of Rs. 500/- shall be given by the contractor. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 5 years from the date of completion of contract / project as a whole. (ii) Plan area shall be measured for payment. (iii) The quoted rate shall be for the entire work and nothing extra shall be paid on this account.

37 Providing and fixing on wall face unplasticised - rigid PVC rain water pipes 110mm dia conforming to IS : 13592 type A including Jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion single socketed pipes, etc., all complete as directed by Engineer-in-Charge. 60.00 R m 367.21 Rupees Three Hundred Sixty Seven and Twenty One Paise Only 22032.71

38 Supplying and fixing of PVC shoes of 110mm dia including jointing to down take pipes using suitable solvent, etc., all complete as directed by Engineer-in-Charge. 20.00 Nos 128.29 Rupees One Hundred Twenty Eight and Twenty Eight Paise Only 2565.76

39 Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead, etc., all complete as directed by Engineer-in-Charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 3.00 Cu m 2368.53 Rupees Two Thousand Three Hundred Sixty Eight and Fifty Two Paise Only 7105.58

40 Demolishing brick work manually / by mechanical built in cement mortar means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead, etc., all complete as directed by Engineer-in-Charge. 2.00 Cu m 2004.58 Rupees Two Thousand Four and Fifty Seven Paise Only 4009.15

41 Half brick masonary with common burnt clay F.P.S (Non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:3 [1 cement: 3 coarse sand], etc., all complete as directed by Engineer-in-Charge. 45.00 Sq m 1093.46 Rupees One Thousand Ninety Three and Forty Five Paise Only 49205.59

42 Providing and fixing Granite stone slab of with (18mm to 25mm thick), area of slab not less than 0.50Sq m, like Ruby Red / Black / Cherry with gang saw cut, mirror polished, premoulded and prepolished, machine cut for urinal partitions, platforms, vanity counters, and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish, etc., complete at all levels, etc., all complete as directed by Engineer-in-Charge. 30.00 Sq m 5267.34 Rupees Five Thousand Two Hundred Sixty Seven and Thirty Three Paise Only 158020.17

43 Providing and fixing of 1st quality Ceramic glazed wall tiles (Light / dark shade) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.30kg per Sq m, including pointing in white cement mixed with pigment of matching shade of any size, etc., all complete as directed by Engineer-in-Charge. 350.00 Sq m 1233.71 Rupees One Thousand Two Hundred Thirty Three and Seventy One Paise Only 431799.15

44 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade over the existing steel, concrete, wooden surface using two or more coats on new work including necessary preparation, etc., all complete as directed by Engineer-in-Charge. 20.00 Sq m 151.69 Rupees One Hundred Fifty One and Sixty Nine Paise Only 3033.90

45 Supplying and fixing of following door fixtures and fittings, etc., all complete as directed by Engineer-in-Charge.

a Providing and fixing bright finished brass handles of 125mm size with screws, etc., complete. 16.00 Nos 249.72 Rupees Two Hundred Forty Nine and Seventy Two Paise Only 3995.53

b Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc., complete. 8.00 Nos 118.36 Rupees One Hundred Eighteen and Thirty Six Paise Only 946.92

c Providing and fixing bright finished brass tower bolts of [250 x 10]mm (barrel type) with necessary screws, etc., complete. 12.00 Nos 429.68 Rupees Four Hundred Twenty Nine and Sixty Seven Paise Only 5156.14

d Providing and fixing bright finished brass 100mm mortice latch and lock with min. 6levers and a pair of lever handles of approved quality with necessary screws, etc., complete. 6.00 Nos 831.58 Rupees Eight Hundred Thirty One and Fifty Seven Paise Only 4989.46

e Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kgs to 80 kgs and door width upto 701mm to 1000mm), with double speed adjustment with necessary accessories and screws, etc., complete. 8.00 Nos 956.60 Rupees Nine Hundred Fifty Six and Sixty Paise Only 7652.81

f Providing and fixing aluminium sliding door bolts (aldrop) of [250 x 16]mm, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws, etc., 28.00 Nos 253.57 Rupees Two Hundred Fifty Three and Fifty Six Paise Only 7099.90

g Providing and fixing 20mm dia chromium plated brass curtain rod / Towel rail of 600mm long having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves, etc., wherever necessary. 6.00 Nos 382.64 Rupees Three Hundred Eighty Two and Sixty Three Paise Only 2295.81

h Providing and fixing aluminium handles of 125mm size, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the instruction of Engineer-in-Charge. 28.00 Nos 64.46 Rupees Sixty Four and Forty Five Paise Only 1804.81

46 Providing and fixing 5.0mm thick glass panes for doors, windows and clerestory window,ventilators (weight not less than 12.50 kg/Sq m), including cutting an dfinishing as per site requirement, etc., all complete as directed by Engineer-in-Charge. 20.00 Sq m 2530.24 Rupees Two Thousand Five Hundred Thirty and Twenty Three Paise Only 50604.75

47 Providing and fixing aluminium tower bolts of size [250 X 10]mm, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyedto required colour or shade, with necessary screws, etc., all complete as directed by Engineer-in-Charge. 28.00 Each 112.04 Rupees One Hundred Twelve and Four Paise Only 3137.19

48 Providing and fixing PVC pipes and specials as mentioned below conforming to IS : 13592 Type A of approved brand, on wall face including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, etc., all complete as directed by Engineer-in-Charge.

a Single socketed unplasticised Rigid PVC Water Pipe 75mm dia 110.00 R m 242.08 #NAME? 26629.06

b Couplers 75mm dia 10.00 Nos 89.22 Rupees Eighty Nine and Twenty Two Paise Only 892.24

c Couplers 110mm dia 8.00 Nos 132.47 Rupees One Hundred Thirty Two and Forty Seven Paise Only 1059.79

d Single tee with door [75 x 75 x 75]mm 6.00 Nos 159.77 Rupees One Hundred Fifty Nine and Seventy Six Paise Only 958.60

e Single tee with door [110 x 110 x 110]mm 6.00 Nos 227.83 Rupees Two Hundred Twenty Seven and Eighty Two Paise Only 1366.97

f Providing and fixing Inlet mouth of rain water pipe CI grating of 15cm dia and weight not less than 440 grams, etc., all complete as directed by Engineer-in-Charge. 8.00 Nos 53.22 Rupees Fifty Three and Twenty Two Paise Only 425.78

49 Providing of plaster drip course / groove in plastered surface or moulding to R.C.C. projections and execute the work, etc., all complete as directed by Engineer-in-Charge. 120.00 R m 76.28 Rupees Seventy Six and Twenty Eight Paise Only 9153.98

50 Providing & fixing water closet white vitreous china Orissa pattern water closet squatting pan of approximate size [580 x 440]mm with integral foot rest and with 100mm sand cast iron P or "S" trap, 10 litres low level flushing cisterns including flush pipe with manually controlled device conforming ot IS : 7231 with all fittings and fixtures complete incluiding cutting gand making good the walls and floos wherever required, etc., all complete as directed by Engineer-in-Charge. 3.00 Each 6584.68 Rupees Six Thousand Five Hundred Eighty Four and Sixty Eight Paise Only 19754.04

51 Providing and fixing of mirror of superior glass of approved quality and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing of rectangular shape of size [453 x 357]mm, etc., all complete as directed by Engineer-in-Charge. 9.00 Each 1325.03 Rupees One Thousand Three Hundred Twenty Five and Three Paise Only 11925.28

52 Providing and fixing pedestal Vitreous China Wash basin size of approximate size [630 x 450]mm with a pair of 15mm C.P. brass pillar taps, 32mm C.P. brass waste coupling of standard pattern including PVC waste pipe of with waste fittings of 32mm dia flexible pipe and make it function of approved brand / make, including painting of fittings and brackets, cutting and making good the walls wherever required, etc., all complete as directed by Engineer-in-Charge. 14.00 Each 4331.55 Rupees Four Thousand Three Hundred Thirty One and Fifty Five Paise Only 60641.74

53 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) of approved brand with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all connecting fittings and fixtures to make it operational completely, including cutting and making good to the walls and floors wherever required, etc., all complete as directed by Engineer-in-Charge. 2.00 Each 6339.63 Rupees Six Thousand Three Hundred Thirty Nine and Sixty Three Paise Only 12679.26

a Providing and fixing white vitreous china extended wall mounted wall closet of size [780 x 370 x 690]mm of apporved shape including provisding and fixing of white vitreous china cistern with dual flushing fittings of lush capacity 3 litres / 6 litres (extendable up to 4 ltr / 8 ltrs ) including seat cove, cistern, fittings, nuts, bolts and gaskets, etc., all complete as directed by Engineer-in-Charge. 6.00 Each 14594.17 Rupees Fourteen Thousand Five Hundred Ninety Four and Seventeen Paise Only 87565.04

54 Providing and fixing 8mm dia C.P. / S.S. Jet (Health Faucet) with flexible tube upto 1 metre long with S.S. triangular plate on walls/Eureopean type W.C. material of approved make and quality, etc., all complete as directed by Engineer-in-Charge. 6.00 Each 339.72 Rupees Three Hundred Thirty Nine and Seventy Two Paise Only 2038.34

55 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of [430 x 260 x 350]mm and [340 x 410 x 265]mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. one urinal basin with 5 ltr PVC automatic flushing cistern, etc., all complete as directed by Engineer-in-Charge. 16.00 Each 6089.76 Rupees Six Thousand Eighty Nine and Seventy Six Paise Only 97436.22

56 Providing, fixing of trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors using hubless centrifugally cast (spun) iron epoxy coated inside and outside as per of 100mm inlet and 100mm outlet as per IS 15905, etc., all complete as directed by Engineer-in-Charge. 4.00 Each 831.48 Rupees Eight Hundred Thirty One and Forty Seven Paise Only 3325.91

57 Constructing masonry Chamber [60 x 60 x 75]cm inside or outside (or approximate size as per site condition), in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) , i.e necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : 18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5, etc., all complete as directed by Engineer-in-Charge. 6.00 Each 10569.12 Rupees Ten Thousand Five Hundred Sixty Nine and Eleven Paise Only 63414.69

58 Providing and fixing 15mm nominal bore dia C.P. brass bib cock of approved quality conforming to IS:8931, etc., all complete as directed by Engineer-in-Charge. 10.00 Each 493.12 Rupees Four Hundred Ninety Three and Eleven Paise Only 4931.16

59 Providing and fixing Concealed Chlorinated Polyvinyl Chloride (CPVC) pipes of approved brand, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing, necessary reducers, unions, collars, bends, tank adaptors, etc., This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints and making good the walls, etc., all complete as directed by Engineer-in-Charge.

a 15mm dia 20.00 R m 484.36 Rupees Four Hundred Eighty Four and Thirty Five Paise Only 9687.19

b 20mm dia 120.00 R m 523.08 Rupees Five Hundred Twenty Three and Eight Paise Only 62770.18

c 25mm dia 80.00 R m 610.31 Rupees Six Hundred Ten and Thirty One Paise Only 48825.14

d 32mm dia 40.00 R m 719.34 Rupees Seven Hundred Nineteen and Thirty Three Paise Only 28773.56

60 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106 gms (or nearest availabe size and weight), etc., all complete as directed by Engineer-in-Charge. 14.00 Each 108.44 Rupees One Hundred Eight and Forty Four Paise Only 1518.17

61 Providing and placing on terrace (at all floor levels) polyethylene water storage tank of 1000 Litres capacilty , IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes, etc., all complete as directed by Engineer-in-Charge. 8.00 per 1000 litre 10703.00 Rupees Ten Thousand Seven Hundred Three Only 85624.00

62 Providing and fixing C.P. brass long/pillar body bib cock of 15mm nominal bore, approved quality conforming to IS standards and weighing not less than 690 gms, etc., all complete as directed by Engineer-in-Charge. 16.00 Each 777.38 Rupees Seven Hundred Seventy Seven and Thirty Seven Paise Only 12438.05

63 Supply and Making connection of drain pipes of 100 to 250mm diamete or sewer line with existing manhole including breaking/cutting into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) cement plastered on both sides with C.M 1:3 ( 1 cement : 3 caorse sand ), finished with a floating coat of neat cement and making necessary channels for the drain, etc., all complete as directed by Engineer-in-Charge. 4.00 Each 788.57 Rupees Seven Hundred Eighty Eight and Fifty Six Paise Only 3154.27

64 Providing, laying, spreading and compacting graded stone aggregate (size range 53mm to 0.075mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, etc., all complete as per specifications and directions of Engineer-in-Charge. 20.00 Cu m 2835.32 Rupees Two Thousand Eight Hundred Thirty Five and Thirty Two Paise Only 56706.44

65 Taking out existing CC interlocking paver blocks from footpath / central verge including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead, etc., all complete as directed by Engineer-in-Charge. 80.00 Sq m 128.19 Rupees One Hundred Twenty Eight and Nineteen Paise Only 10255.42

66 Laying old cement cocrete interlocking paver blocks of any design / shape laid in required line, level, curvature, colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand, etc., all complete as directed by Engineer-in-Charge. (Old CC paver blocks shall be supplied by the department free of cost). 65.00 Sq m 392.07 Rupees Three Hundred Ninety Two and Seven Paise Only 25484.57

67 Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand, etc., all complete as directed by Engineer-in-Charge. 80.00 Sq m 945.76 Rupees Nine Hundred Forty Five and Seventy Five Paise Only 75660.48

68 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per Sq m as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired, etc., all complete as directed by Engineer-in-Charge. The sheet shall be fixed using self drilling /self tapping screws of size [5.5 x 55]mm with EPDM seal, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 80.00 Sq m 718.71 Rupees Seven Hundred Eighteen and Seventy Paise Only 57496.52

69 Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology 15mm nominal bore, etc., all complete as directed by Engineer-in-Charge. 2.00 Nos 8566.00 Rupees Eight Thousand Five Hundred Sixty Six Only 17132.00

70 Providing & fixing white vitreous china water less urinal of size [600 x 330 x 315]mm having antibacterial / germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal, etc., all complete as directed by Engineer-in-Charge. 2.00 Nos 17600.06 Rupees Seventeen Thousand Six Hundred and Six Paise Only 35200.12

71 Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), including finishing, etc., all complete as directed by Engineer-in-Charge. 4.00 Cu m 8363.08 Rupees Eight Thousand Three Hundred Sixty Three and Eight Paise Only 33452.32

72 Providing and laying of non presure NP2 class (light duty) RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 ceemnt : 2 fine sand) including testing of joints, etc., all complete as directed by Engineer-in-Charge.

a 150mm dia pipe 25.00 R m 541.43 Rupees Five Hundred Forty One and Forty Two Paise Only 13535.65

b 300mm dia pipe 20.00 R m 967.45 Rupees Nine Hundred Sixty Seven and Forty Five Paise Only 19349.08

73 Providing and fixing of gun metal non return valves of approved quality screwed end of dis 25mm dia horizontal, etc., all complete as directed by Engineer-in-Charge. 4.00 Nos 575.43 Rupees Five Hundred Seventy Five and Forty Three Paise Only 2301.73

a Providing and fixing of PTMT shelf of 440mm long, 124mm width and 36mm height of approved quality and colour weighiung not less than 300 grams, etc., all complete as directed by Engineer-in-Charge. 2.00 Nos 693.94 Rupees Six Hundred Ninety Three and Ninety Four Paise Only 1387.89

74 Dismantling of old S.W. pipes of 100mm diameter including breaking of joints and bed concrete stacking of useful materials near the site within 50m lead and disposal of unserviceable materials into municipal dumps and making temporary arrangements to protect / countinue ongoing service lines of other floors, etc., all complete as directed by Engineer-in-Charge. 40.00 R m 86.60 Rupees Eighty Six and Fifty Nine Paise Only 3463.88

Sub-Total of Part - I [Civil Works] (Excluding GST) Rupees Sixty Seven Lakh Fifty Seven Thousand Five Hundred Seventy Five and Six Paise Only 6757575.07

Part - II [Electrical Works]

1 Light Fittings

Supply and fixing on existing wall / ceiling, testing & commissioning of surface mounting, Batten type 1X18W/20W T8 LED Tube light (four feet) Luminaries with minimum lumens output Efficacy of minimum100 lm/W., comprising of white powder coated CRCA sheet steel housing, operating on single phase 230V 50Hz AC supply, built-in electronic driver, LM 79 certification for luminaire. Other standard accessories including necessary inter-connections and supply of 1 No of 18/20W T8 LED Tube, complete in all respects and as directed by engineer-in-chage. Make & model: The LED tube & batten shall be of CROMPTON-IGP161LT8-16.1XT8+LT8-20-865/Equivalent model of approved make luminaries which meets the above technical specification. complete in all respect and as directed by Engineer-in-charge. 4.00 Each 1150.00 Rupees One Thousand One Hundred Fifty Only 4600.00

a) Supply, installation, testing & commissioning of 300mm dia 900 rpm heavy duty exhaust fan of any approved make with louvers, connecting cord with 6A, 3 pin plug top and with all necessary accessories, including making wall openings and replastering to smooth finish with matching paint etc., complete in all respects and as directed by Engineer-in-charge. 3.00 Each 4731.36 Rupees Four Thousand Seven Hundred Thirty One and Thirty Six Paise Only 14194.08

3 Lighting Point wiring

Wiring for light point / fan point / exhaust fan point/call bell point from nearest switch box with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, fan regulator, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (as per detailed CPWD specifications for Group B wiring)

a) Wiring to single light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects. 4.00 Pt 1222.89 Rupees One Thousand Two Hundred Twenty Two and Eighty Nine Paise Only 4891.56

b) Wiring to exhaust fan point using 6A, 250V gr. flush type modular SP switch housed along with other lighting switches/separate switch box if required and 3pin 6A, 250V gr. modular type socket housed near the exhaust fan complete in all respects. 3.00 Pt 1222.89 Rupees One Thousand Two Hundred Twenty Two and Eighty Nine Paise Only 3668.67

4 Supplying and fixing DP sheet steel enclosure on surface or in recess along with 25/32A 240V "C" curve, DP MCB complete with connections, testing and commissioning etc., as required. 2.00 Each 1209.44 Rupees One Thousand Two Hundred Nine and Forty Four Paise Only 2418.88

5 Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

a) 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire 80.00 Mtr 284.52 Rupees Two Hundred Eighty Four and Fifty Two Paise Only 22761.60

Sub-Total of II[Electrical Works] (Excluding GST) Rupees Fifty Two Thousand Five Hundred Thirty Four and Seventy Nine Paise Only 52534.79

Sub-Total of Part - I + II (Excluding GST) Rupees Sixty Eight Lakh Ten Thousand One Hundred Nine and Eighty Five Paise Only 6810109.86

The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount

Tenderer's Quote (Excluding GST) 6810109.86 BELOW % 6810109.86

Add 18% GST Rupees Twelve Lakh Twenty Five Thousand Eight Hundred Nineteen and Seventy Seven Paise Only 1225819.77

Grand Total (Including GST) Rupees Eighty Lakh Thirty Five Thousand Nine Hundred Twenty Nine and Sixty Two Paise Only 8035929.63

Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.

WARNING: PLEASE ENTER PERCENTAGE QUOTE

HINDUSTAN AERONAUTICS LIMITED

Facilities Management Division

Pre-Qulification Profile (To Be uploaded along with Part A)

Tender Ref No. or Contract No.: HAL/FMD/C-108A/25-26

Name of Work: Construction of Toilets at Heritage Centre, HAL [Bangalore].

Estimated Amount in Rs.: 8030000

Tender Notice Date : 01.04.2026

PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3

Sl.No Description Details Enclosed / Not Enclosed Remarks

1 Name of the Individual / Firm / Company: * Mandatory Please Enter Name of the Individual/firm/company

2 Type of ownership PlsEnter Type of Ownership

If Other, please specify

3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc., Pls enter Details of Constitution

4 Address for correspondence: Pls Enter Address

5 (a) PAN No.: Pls Enter Pan NO

5 (b) Service Tax Registration No

5 (c ) Goods and Service Tax ID No.

6 Contact details

Contact person name Please Enter Contact person Name

Mobile No. Pls Enter Mobile No

Ph. No. with STD code

FAX No. with STD code 1 #N/A

7 Registered Contractor

If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs 0 7 E 1

Registration No. 199999 7 F 2

Category 200000 6 G 3

PEMD Amount ( If paid ) 499999 6 H 4

8 I.T Returns for past 03 years 999999 5 J 6

2025-26 Pls Select 'Yes' ' No' for IT Return for All Three years 1000000 4 K 7

9 Average annual financial turn over during the last 3 years, ending 31st March 2025 of the previous financial year [ should not be less than 30% of Amount put to tender] 4999999 3

YEAR TURN OVER IN Rs. Enclosed / Not Enclosed REMARKS 5000000 2

2024- 2025 Rs. Pls Enter Turn over in Rupees for all the 3 years 7499999 2

Average annual Financial turn over 0.00 2409000.00

Avg Annual Turnover criteria is not met 10000000 1

10 ESI & PF Nos with proof Nos Enclosed / Not Enclosed

ESI Registration No/. with proof if any Remarks if any

PF Registration No. with proof if any

11 Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Name of the Bank

Type of Account

12 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission solvency cal

Name of Bank & Branch Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs #REF! 28-Jun 0 40000

Date of Issue 200000 40000

Value in Rs. 200001 150000

Solvency value is NOT as per NIT

13 Experience of having successfully completed similar works during last 7 years ending on the previous day of submission of tender. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender. 3212000 500001 250000

Completed similar works during last 7 years Pls Select %of similar works completed during last 7 years 1000000 250000

Work NoI Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 1000001 500000

Brief Description of Work: Please enter Details for Work No 1 2000000 500000

Completed value of Work in Rs. 2000001 1000000

Date of Commencement of Work 4000000 1000000

Date of Actual Completion of Work: 4000001 2000000

Work No II Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 10000000 2000000

Brief Description of Work: Pls Enter Details for Work No II

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work: work done

Work No III Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal #REF! 2555

Brief Description of Work: Pls Enter Details for Work No III #REF!

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work:

14 Details of person holding the power of Attorney (If different from contact person)

Name Related Document to be Uploaded to eProcurement Portal

Mobile No. Pls Enter Details for Person holding Power of Attorney

Ph. No. with STD code

FAX No. with STD code

15 DECLARATION I

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.

16 DECLARATION II

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer. 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. Pls Accept the Delaration II