GE/ALP (8610) KOLKATA OF 2025-26

Common items for JOB 'A', 'B', 'C' (B/R portion)

Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc.complete upto four storiey bldg complete all as specified and directed.

M&L for Rendering 15mm thick in CM (1:6) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and as directed Note: Work should be carried in bldgs upto height of 4 storey

M&L for rendering 15mm thick in CM (1:4) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth complete all as specified and directed. Note: Work should be carried in bldgs upto height of 4 storey

Preparation of new plastered surface of wall and M&L for applying two coats of oil emulsion distemper over & including a coat of primer 3mm thick wall care putty on wall complete all as specified and directed.

Preparation of old plastered surface of wall and M&L for applying two coats of oil emulsion distemper over & including a coat of primer 3mm thick wall care putty on wall complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc 1.5 sqm and not exc 4 Sqm each and removing from site complete all as specified and directed.

S&F Powder coated aluminium sliding windows for three track with rubber gasket, stopper powder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size (91mmX40mmX1.55mm) and shutter of section (20mm X20mm X1.55mm) incl ( two shutter of 4.8mm thick glass and one shutter of wiremesh 0.36 mm dia of wire and average width of aperture 1.40 mm) including aluminum chequered grill with necessary all fittings complete all as per manufacturer's instructions complete all as specified and directed.

Dismantling wrought iron or mild steel works of any description not otherwise provided for complete all as specified and directed.

M&L for framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

Preparation of new steel surfaces of any description over 10cm width or girth and M&L for applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and directed. Note: Work should be carried in bldgs upto height of 4 storey

Demolition of cement concrete in ground floor and pavings n exc 15 cm thickness (below or above ground level complete all as specified and directed.

M&L for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan or to any radius in half brick work built in CM (1:4) complete all as specified and directed.

Dismantiling of floor hearth or wall tiling incl cement mortar (but not backing), and rubbish off the premises (out of MOD land) complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 Type B-1 ( using 20 mm graded stone aggregate) as in sub base of floor complete all as specified and as directed

S&F curtain rod decorative aluminium alloy with fixing brackets including taking down old pelmet box making good on walls complete all as specified and directed. Note: Work should be carried in bldgs upto height of 4 storey

S&F bracket decorative type for curtain rods aluminium alloy complete all as specified and directed. Note: Work should be carried in bldgs upto height of 4 storey

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) of insulation boards/slabs/blankets, any thickness, including cover fillets complete all as per specified and directed

M&L for suspended false ceilling system using metalic exposed suspende system, grid section size 600mm x 600mm comprising of GI powder coated main runner of dimension 39 mm x 24mm x 0.80mm thick ( thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of Runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X 24mm x 0.8 mm thick wall angle 22.2mm x22.2mm x 0.65 mm thick ( thickness comprising of GI/0.35 + PPPCGS/0.3 mm & Weight of angle 0.70 kg for 3050 mm length) with and including 6 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid ( placed in the grid system duly suspended with 4 mm dia G I bars hangers fixed with steel dash through fasteners from purlins of the roof with necessary fittings and fixtures etc complete all as specified and directed.

S&F in repairs for 18/19mm thick block boards, grade 2 quality,interior grade, decorative type with decorative face veneer on both face fixed with screws to timber frame work as in cupboard shutter, Kitchen cabinate, work station etc. including external teak wood lipping 6mm thick fixed with nails complete all as specified and directed.

S&F in repairs for 0.9mm thickess of decorative laminated type 1 of surfaces finish,colour and pattern as approved fixed with approved adhesive as per manufacture,s instruction complete all as specified and directed.

S&F in repairs 30mm width of flap continious piano hinges mild steel,bright finish or electro galvanised complete all as specified and as directed

Common items for JOB 'A', 'B' & 'C' (E/M portion)

S&F in repairs LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with inbuilt driver, suitable for roof ceiling including connecting up with driver three core flexible copper conductor wire of suitable size complete all as specified and as directed.

Items only for JOB 'A' (B/R Portion)

Taking down of steel window and ventilator with guard bar complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) arae n exc 1.5 sqm each and removing from site complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed.

Demolition of Reinforced Cement concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed. Note: Work should be carried in bldgs upto height of 4 storey

M&L for Glazed ceramic tiles of size 450x300x7-8mm thick in verticle surfaces set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles n. exceeding 0.36 sqm over & including 15 mm thick screedbed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as per specified and directed.

All as per BOQ Serial item no 30 above but as in skirting ,dado etc over & including 10 mm thick cement plaster in CM (1:4) complete all as per specified and directed

M&L for Non-Skid ceramic coloured floor tiles as in floor 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc laid over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and as directed. Note: Tiles to be laid with adhesive and spacers & joints to be sealed by epoxy

S&F powder coated aluminium ventilator louvre type with frame, aluminium section weighing 0.55 Kg/M including 4mm thick glass/ss wire mesh necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener etc., complete all as specified and as directed

Taking up or down 15mm steel tubing and connections complete all as specified and as directed.

Taking up or down 20mm steel tubing and connections complete all as specified and as directed.

Taking up or down 25mm steel tubing and connections complete all as specified and as directed.

S&F 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed

S&F 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed.

S&F 32 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed

M&L for cutting chases, pinning, in making good to facing where required of of brick wall and pointing in cement motrar 1:3 to ends and cutting chases for concealed water tubing and concealed conduit wiring ete and making good surfaces complete all as specified and as directed

M&L for Granite slab 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, walls, window- cills, cooking platforms over screed bed/plaster 15 mm thick in CM (1:4) & including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. Note: Work should be carried in bldgs upto height of 10 storey

Dismantalling of existing water tanks and removinging to store and S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I with & including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

M&L for From work to edges of concrete not 10 cm but n.exc 20 mm in rough finished surface complete all as specified and as directed.

M&L for form work to soffit of suspended slab such as roof slab n.exc 20 mm thick for rough finished for flat roof complete all as specified and as directed.

M&L for RCC (1:2:4) type B 1 using 20 mm graded stone aggregate as in roof slab supported as wall, slab to shelves and the like complete all as specified and as directed at site.

S&F in repairs 15mm bore bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and as directed.

S&F in repairs 15mm bore Brass CP angular stop cock concealed type with crutch or butterfly handle complete all as specified and as directed .

S&F in repairs for 15mm bore Chromium Plated pillar tap fancy type cast copper alloy, with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repairs Vitreous China wash basin ( white), flat back, size 580 x 450 mm including CP waste coupling 32mm dia excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and as directed.

S&F in repairs 32mm dia flexible PVC waste pipe for basin etc complete all as specified and as directed.

S&F in repairs Brass chromium plated shower rose 125 mm size including fixing to steel pipe or union complete all as specified and as directed.

S&F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and as directed.

S&F in repairs vitreous china squatting pan of orissa pattern long pan of size 580 mm x 440mm with integral foot rest white with cast iron p or s trap with back inlet including flush pipe of suitable length to connection with existing cistern & make good complete all as specified and as directed.

S&F in repairs 20mm dia brass chromium plated tubular towel rails,D type, 60cm long between flanges complete all as specified and as directed.

S&F in repairs vitreous China wash down water closet pan ( padestal pattern) incl PVC seat cover , (excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe etc. comlete all as specified and directed.

S&F in repairs 15 mm bore Brass CP Health faucet screwed down for iron pipe and fixed complete all as specified and as directed.

S&F in repairs Gun- metal, globe or gate valves 20 mm dia of pipe with iron wheel head,screwd both ends for iron pipe and fixed complete all as specified and as directed at site.

Preparation on new plastered surfaces of wall and M&L for applying two coats of anti-algae and anti-fungal exterior grade weather coat paint over & including a coat of primer complete all as specified and directed. Note: Work should be carried in bldgs upto height of 4 storey

Preparation of old decorated surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds,etc and M&L for applying one coat of anti-algae and anti-fungal exterior grade weather coat paint complete all as specified and directed. Note: Work should be carried in bldgs upto height of 4 storey

S&F in repairs 110mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and as directed.

S&F in repairs 110mm bore PVC(SWR) pipe bend single socket complete all as specified and as directed.

S&F in repairs CI Nahani trap of 100mm dia, including jointing to waste pipe fixed in cement concrete, (1:2:4) type B1 ( using 20 mm graded stone aggregate) complete all as specified and as directed.

S&F in repairs CP grating of 100mm dia, fixed with cement mortar (1:3).complete all as specified and as directed.

S&F in repairs Solid PVC Moulded Door Frame of size 50mm x 47mm made out of 5mm Moulded/printed PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & drawing complete all as specified and as directed. Note: Work should be carried in bldgs upto height of 4 storey

S&F in repairs Factory made solid panel PVC Moulded door shutter 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick Moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face complete all as specified and as directed.

S&F in repairs 40mm dia cupboard knobs of brass fixed with nut, screw and washer complete all as specified and as directed.

S&F in repairs 75mm Hasp and staple, safety type brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F in repairs 6mm thick plywood in cupboards complete all as specified and as directed. Note: Work should be carried in bldgs upto height of 12 storey

S&F in repairs 2nd class hard wood plain fillet of size exc 13 & n.exc 25 Sq cm, rectangular or square in section, clean sawn, secured with nails or beads complete all as specified and as directed. Note: Work should be carried in bldgs upto height of 12 storey

M&L for applying evenly a tack coat of industrial bitumon 85/25 at the rate of 1.2 kg per sqm including cleaning surface on roof surface for fixing APP membrane complete all as specified and directed. Note: Work should be carried in bldgs upto height of 12 storey

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid over bitumen coasted surface of roof applied with proper torch flames all as per manufactures instruction complete all as specified and as directed. NOTE:- (i)The APP membrane will have an overlaping of 100 mm on the end laps and 150 mm on side laps. (ii)The overlaping and joints will be thermo sealed with the propare torch. (iii) Work should be carried in bldgs upto height of 12 storey

M&L for applying protective coating with aluminium paint @ 0.2 kg/sqm complete all as specified and directed. Note: Work should be carried in bldgs upto height of 12 storey

M&L for PCC (1:3:6) type C1 using 20mm graded stone aggregate as in bed blocks for hold fasts including making good or disturbed portion with plaster to match with existing surface complete all as specified and as directed.

S&F in repairs 100mm long butt hinges medium weight, cold rolled mild steel complete all as specified and as directed.

S&F in repairs 300 mm long aluminium anodised , barrel tower bolts of extruded section complete all as specified and as directed.

S&F in repairs 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F in repairs aluminium alloy anodised sliding door bolts and hasp and staple (Bolt type) and fixing clips of sheets cast or extruded sections and fixing bolts and sliding bolts or extruded section ot cast alum alloy and fixed length of bolt 300mm complete all as specified and as directed.

Preparation of new or previous untreated wood and wood based surfaces of any description over 10 cm girth or width not otherwise described and M&L for applying two coats of Synthetic enamal paint over & including a coat of pink primer complete all as specified and as directed.

Excavation in trenches not exc 1.5 mtr wide and not exc. 1.5 mtr deep for foundation in any type of soil & getting out complete all as specified and as directed.

Demoiltion and breaking up 150mm dia drain pipes (saltglazed, stoneware , AC or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.

M&L for concrete bed for 150 mm bore pipe in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) to drain pipes including packing under, haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for 150 SGSW drain pipes laid in trenches and jointed complete all as specified and as directed.

Returning filling in trenches including spreading leveling and well ramming with water complete n.exc 25 cm thick in each layer complete all as specified and as directed.

Removing exavated soild n.exc 50 mtr and depositing where directed at a leve n. exc 1.5 mtr above the starting point complete all as specified and as directed.

M&L for precast cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate as in cover slab, shelves, and similar work set in CM (1:4) complete all as specified and as directed.

S&F in repairs Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, CP spreader , pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) etc, complete all as specified and directed.

S&F in repairs 15mm bore two way Bib tap CP fancy type with chromium plated crutch or butterfly handle complete all as specified and as directed.

S&F in repairs Vitreous China urinal partition white of Size (310X700 ) mm complete all as specified and as directed.

M&L for mild steel TMT bars 8 to 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Items only for JOB 'A' (E/M portion)

Taking down carefully copper/aluminium point wiring (light,fan,socket etc.) complete including fittings such as switch, ceiling rose, light fittings, regulators etc. and making good to the disturbed surface of walls, floors etc. complete all as specified and directed.

All as per BOQ Serial item No. 23.1 here in before but for 5 Amps Socket on same board complete all as specified and directed.

S&F in repairs Ceiling rose, 3 terminal, PVC/ polycarbonate isolated body, 230 V complete all as specified and directed.

S&F in repairs Piano switch flush type single pole one way 5 Amps, 230 V complete all as specified and directed.

S&F in repairs Socket outlet 2 in 1, 3 pin, 6A complete all as specified and directed.

S&F in repairs LED tube light fitting 4 ft, 20 watt, 230 volt energy efficient comprises of extruded PVC housing, with inbuilt driver and PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Taking down carefully existing PVC Exhaust Fan/Wall mounted fan and Supply & fixing PVC Exhaust fan 250mm complete all as specified and as directed.

Items only for JOB 'B' (B/R portion)

M&L for Rendering 10mm thick with CM (1:3) as on concrete surfaces and finished the surface even and smooth as in ceiling includiing necessery scafolding and chicken wire mesh etc complete all as specified and as directed.

Preparation of old decorated surfaces by complete removal of existing surface brooming down or steel wire brushing scrapping down smoke soot and greasy spots and M&L for applying two coat of cement base paint on walls complete all as specified and directed. Note: Work should be carried in bldgs upto height of 12 storey

Preparation of new plastered surface of ceiling and M&L for applying two coat of white wash on new surface etc, complete all as specified and as directed.

Easing of existing door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and as directed.

S&F in repairs Steel work in tubular trusses, posts,rafters, struss and brackets etc including special shaped washers etc. complete using ERW or induction butt welded tubes incl fixing to walls and similar supports etccomplete all as specified and as directed.

Preparation of old steel surfaces of any description over 10 cm width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in repairs Power coated aluminium door shutter with frame fixed including roller machine with rubber gasket, stopper, cleats, handles etc complete incl aluminium door styles of size (80 mm x 38 mm x 2.00 mm) and aluminium door section of top, bottom and lock rail shutter frame of (80 mm x 38mm x 2.00 mm) and 4.8 mm thick glass & 9mm thick particles board as per requirement incl taking down old door with necessary all fitting and all necessary fittinngs complete all as specified and as directed.

S&F in repairs Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed etc, complete all as spcified and directed.

M&L for double charge Vitrified Ceramic tiles light shade 8 to 9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm as flooring with border of dark shed, over and including 15mm thick screed bed in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match in white or coloured cement to match etc complete all as specified and as directed.

M&L for providing anti termite (post construction) along the external wall below concrete or masonary apron using chemical Chloropyritphos 20 EC or linane 20 EC (ISI Marked) emulsion @ 2.25 literes per linear meter including drilling and plugging holes etc in aprons/plinth protection complete all as specified and as directed.

M&L providing anti termite (post construction) of soil under existing floors using chemical Chloropyritphos 20 EC or linane 20 EC (ISI Marked) emulsion @ one leter per holes , 300 mm apart along the junction of floor and walls including drilling and plugging 12 mm dia holes with cement mortar 1:2 ( 1 Cement : 2 coarse sand) to match the existing floors complete all as specified and as directed.

M&L for providing anti termite (post construction) of voids in masonary using chemical Chloropyritphos 20 EC or linane 20 EC (ISI Marked) emulsion @ 1.00 liter per holes , at 300 mm intervals including drilling 6 mm dia holes at downward angle of 45 degree and repluging the holes with cement mortar (1:2) to match the existing surface complete all as specified and as directed.

All as per BOQ Serial item No 19 here in before but only for refixing the serviceable false ceiling complete all as specified and as directed.

S&F in repairs 6 mm thick Gypsum board/calcium silicate board tiles of size (600x600) mm incl proper hanging arangement as required complete all as specified and as directed.

S&F in repairs Brass Locks, cupboard, grade I, size 50 mm two levers complete all as specified and as directed.

S&F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

S&F in repiars Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed.

S&F in repiars 100 mm long Brass handles, cast type polished bright complete all as specified and as directed.

S&F in repairs Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC fillets of width 35mm including necessary caping/fillets at top , bottom, middle and junctions required as per site etc complete all as specified and as directed.

S&F in repairs power coated aluminium Partition wall of frame size (80mm x 38mm x 2.00 mm) with standard beads/glazing clips, locking arrangement etc with necessary all fittings complete all as per manufacturer's instructions and complete all as specified and as directed.

S&F in repairs 4.8 mm plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area of glass not exc 0.5 sqm each pane complete all as specified and as directed.

M&L for 9 mm thick prelaminated partilce boards interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screw to timber frame for pelmet boxes,aluminium door and aluminium partitions complete all as specified and as directed.

Items only for JOB 'B' (E/M portion)

All as per BOQ serial item No. 23.1 here in before but for 5 A socket point on independent board complete all as specified and directed.

All as per BOQ serial item No. 23.1 here in before but for 15 A socket point independent with 2.5 sqmm 1100V grade FRLSH PVC insulated copper conductor complete all as specified and directed.

All as per BOQ serial item No. 23.1 here in before but for AC Point independent with 4.0 sqmm 1100V grade FRLSH PVC insulated copper conductor complete all as specified and directed.

S&F in repiars Modular type switch, one way 6 Amps , 1 module complete all as specified and as directed. Make:-Legrand/Anchor(Roma)/Crabtree or equivalent make as approved by GE

S&F in repairs modular type socket 5 pin, 6 Amps 2 module complete all as specified and as directed. Make:-Legrand/Anchor(Roma)/Crabtree or equivalent make as approved by GE

S&F in repairs Modular type socket 5 pin, 16 Amps 2 module complete all as specified and as directed. Make:-Legrand/Anchor(Roma)/Crabtree or equivalent make as approved by GE

S&F in repairs Modular type switch, one way 16 Amps, 1 module complete all as specified and as directed. Make:-Legrand/Anchor(Roma)/Crabtree or equivalent make as approved by GE

S&F in repairs AC Power Supply unit 6 module consisting of in built modular motor starter, plug top, 20 Amp Socket and box duly fixed/grouted on wall complete all as specified and as directed.

S&F in repairs MCB, 06 Amps to 32 Amps, single pole, 240 Volt "B" series, breaking capacity 10 KA complete all as specified and as directed.

S&F in repairs SPN, MCB, DB, 8 way with Amps rated copper bus bar, neutral link, suitable for mounting MCB's 240 volts double door type complete all as specified and as directed.

S&F in repairs MCB, 32 Amps, SPN, 240 Volt, "B" series, breaking capacity 10 KA complete all as specified and as directed.

S&F in repairs MCB, 63 Amps, SPN, 240 Volt "B" series, breaking capacity 10 KA complete all as specified and as directed.

S&F in repairs Wall Mounted Fan 400 mm 3 blade high speed complete all as specified and as directed.

M&L for circuit/sub-main wiring with two run of 1100 V grade PVC insulated & unsheathed 4.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 4.0 Sqmm 1100 V grade FRLSH PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through concealed PVC conduit complete all as specified and as directed. Note : (i) Three runs of 4.0 Sqmm cable and one run of PVC Conduit shall be measured as one length. (ii) Rate of chase cutting for concealing the conduit & making good is deemed to be included in quoted unit rate

Items only for JOB 'C' (B/R portion)

S&F in repairs steel Steel work of MS Square/round pipe or angles, Tee etc as in purlin, rafter, post and trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.56mm of an colour having tensile strength of Alloy 31000 H4 as in ridges, Valley gutter, drip and straight to flashing (length and, fixed girth as fixed) with self tapping screws complete all as specified and as directed.

M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of flooring complete all as specified and as directed.

M&L for screed bed or bedding layer of (cement mortar 1:4) 15 mm thick for laying floor finishes, complete all as specified and directed

M&L for pavement floor tile of area of each tile not exc 0.16 sqm, 10mm thick set & jointed in neat cement slurry and pointed with grey cemented and pigment to match the colour of tiles in floor complete all specifief and directed

Preparation on new plastered surfaces of wall and M&L for applying two coats of cement base paint complete all as specified and directed. Note: Work should be carried in bldgs upto height of 10 storey

Preparation of old treated/decorative surfaces of wall by washing, rubbing down and stopping old painted surface and M&L for applying One coat of cement base paint etc complete all as specified and as directed.

Please Enable Macros to View BoQ information