BALANCE WORKS OF AMRIT BHARAT STATION SCHEME OVER FZR & JAT DIVISION

Item Breakup - A-DSR ITEMS

of 88 mm, weighing not less than 190 gms. 17.74 Providing and fixing PTMT shelf 440 mm Each 16 607.05 9712.8 long, 124 mm width and 36 mm height of 18 approved quality and colour, weighing not less than 300 gms. 17.75 Providing and fixing PTMT 15 mm Urinal Each 10 92.75 927.5 spreader size 95x69x100 mm with 1/2" BSP 19 thread and shapes, weighing not less than 60 gms. 17.78 Providing and fixing white vitreous china Each 12 13036.55 156438.6 extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous 20 china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. 17.80 Providing and fixing white vitreous china Each 14 7004.45 98062.3 battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 21 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. FEROZPUR DIVISION-GATI SHAKTI/NORTHERN RLY 17.81 Providing and fixing floor mounted, white Each 11 16100.4 177104.4 vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual 22 flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. Total 984606.60 Item- 15 CODE-18 WATER SUPPLY S No. Item No Description of Item Unit Qty Rate Amount 18.0 WATER SUPPLY 18.1S PE-AL-PE COMPOSITE PRESSURE PIPE Providing and fixing Polyethelene- Aluminium-Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 degrees celsius, including all 18.1 special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-in-charge.-INTERNAL WORK - EXPOSED ON WALL 1 18.1.1 1216 (16 mm OD) pipe Metre 115 294.55 33873.25 2 18.1.2 1620 (20 mm OD) pipe Metre 115 327.2 37628 3 18.1.3 2025 (25 mm OD) pipe Metre 120 429.45 51534 4 18.1.4 2532 (32 mm OD) pipe Metre 55 527.05 28987.75 5 18.1.5 3240 (40 mm OD) pipe Metre 75 761.35 57101.25 6 18.1.6 4050 (50 mm OD) pipe Metre 85 900.45 76538.25 Providing and fixing Polyethelene- Aluminium- Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 deg. Celsius, including all special fittings of composite material (engineering 18.2 plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge, Concealed work, including cutting chases and making good the wall etc. 7 18.2.1 1216 (16 mm OD) pipe Metre 100 513.75 51375 8 18.2.2 1620 (20 mm OD) pipe Metre 110 537.15 59086.5 9 18.2.3 2025 (25 mm OD) pipe Metre 85 654.2 55607 10 18.2.4 2532 (32 mm OD) pipe Metre 55 747.85 41131.75 18.4S PP-R PIPES FEROZPUR DIVISION-GATI SHAKTI/NORTHERN RLY Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, 18.6 including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in- Charge. -External work 11 18.6.1 PN - 16 Pipe, 20mm OD (SDR-7.4) Metre 70 213.9 14973 12 18.6.2 PN - 16 Pipe, 25 mm OD (SDR-7.4) Metre 296 268.2 79387.2 13 18.6.3 PN - 16 Pipe, 32 mm OD (SDR-7.4) Metre 40 320.6 12824 14 18.6.4 PN - 16 Pipe, 40 mm OD (SDR-7.4) Metre 45 419.25 18866.25 15 18.6.5 PN - 10 Pipe, 50 mm OD (SDR-11) Metre 40 568.6 22744 16 18.6.7 PN - 10 Pipe, 75 mm OD (SDR-11) Metre 270 879.45 237451.5 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded 18.9 fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.-External work 17 18.9.8 80 mm nominal dia Pipes Metre 550 1990.4 1094720 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, 18.11 including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 18 18.11.1 15 mm dia nominal bore Metre 50 485.2 24260 19 18.11.2 20 mm dia nominal bore Metre 80 541.1 43288 Providing and fixing G.I. pipes complete 18.12 with G.I. fittings including trenching and refilling etc.-External work 20 18.12.1 15 mm dia nominal bore Metre 82 267.5 21935 21 18.12.2 20 mm dia nominal bore Metre 100 315.35 31535 22 18.12.3 25 mm dia nominal bore Metre 80 417.95 33436 23 18.12.4 32 mm dia nominal bore Metre 55 457.7 25173.5 24 18.12.7 65 mm dia nominal bore Metre 35 768.6 26901 25 18.12.8 80 mm dia nominal bore Metre 45 919.1 41359.5 Making connection of G.I. distribution branch with G.I. main of following sizes by 18.13 providing and fixing tee, including cutting and threading the pipe etc. complete : 26 18.13.1 25 to 40 mm nominal bore Each 28 757.1 21198.8 27 18.13.2 50 to 80 mm nominal bore Each 25 1513.7 37842.5 18.15S BRASS FITTINGS Providing and fixing gun metal gate valve 18.17 with C.I. wheel of approved quality (screwed end) : 28 18.17.1 25 mm nominal bore Each 41 532.35 21826.35 Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : 29 18.18.1 15 mm nominal bore Each 34 348.85 11860.9 30 18.18.2 20 mm nominal bore Each 58 397.45 23052.1 31 18.18.3 25 mm nominal bore Each 16 399.15 6386.4 Providing and fixing gun metal non- return 18.19 valve of approved quality (screwed end) : FEROZPUR DIVISION-GATI SHAKTI/NORTHERN RLY 18.19.1 25 mm nominal bore 32 18.19.1.1 Horizontal Each 13 506.65 6586.45 33 18.19.1.2 Vertical Each 12 573.5 6882 18.23S C.I./DUCTILE IRON PIPES & SPECIALS Providing and laying S&S centrifugally cast 18.27 (spun) iron pipes (Class LA) conforming to IS - 1536 : 34 18.27.1 100 mm dia pipe Metre 45 1210.5 54472.5 Providing lead caulked joints to spun iron or 18.28 C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : 35 18.28.1 100 mm diameter pipe Each 36 410.25 14769 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber 18.31 insertions etc. (the tail pieces if required will be paid separately) : 18.31.1 100 mm diameter 36 18.31.1.2 Class II Each 7 4500.25 31501.75 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 18.32 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : 18.32.1 With common burnt clay F.P.S.(non Each 135 1712.15 231140.25 37 modular) bricks of class designation 7.5 Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal 18.37 size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 18.37.1 With common burnt clay F.P.S.(non Each 47 9020.8 423977.6 38 modular) bricks of class designation 7.5 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including 18.47 excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 39 18.47.2 20 mm nominal bore Each 16 709.7 11355.2 40 18.47.3 25 mm nominal bore Each 22 789.95 17378.9 FEROZPUR DIVISION-GATI SHAKTI/NORTHERN RLY 18.48 Providing and placing on terrace (at all floor Litre 9500 9.7 92150 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable 41 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.48A Providing and fixing rectangular high Litre 3500 9.7 33950 density polyethylene water storage loft tank with cover, conforming to IS : 12701, colour of opaque white or as approved by 42 Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass long nose bib cock of approved quality conforming to 18.50 IS standards and weighing not less than 810 gms. 43 18.50.1 15 mm nominal bore Each 61 715.05 43618.05 Providing and fixing C.P. brass long body bib cock of approved quality conforming to 18.51 IS standards and weighing not less than 690 gms. 44 18.51.1 15 mm nominal bore Each 65 708.4 46046 Providing and fixing C.P. brass angle valve 18.53 for basin mixer and geyser points of approved quality conforming to IS:8931 45 18.53.1 15mm nominal bore Each 64 500.35 32022.4 Total 3389733.85 Item- 16 CODE-19 DRAINAGE S No. Item No Description of Item Unit Qty Rate Amount 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff 19.1 mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 1 19.1.1 100 mm diameter Metre 60 375.75 22545 2 19.1.2 150 mm diameter Metre 60 591.4 35484 3 19.1.3 200 mm diameter Metre 60 830.4 49824 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 19.2 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 4 19.2.1 100 mm diameter S.W. pipe Metre 70 895.5 62685 5 19.2.2 150 mm diameter S.W. pipe Metre 65 1095.15 71184.75 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water 19.4 tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed 19.6 with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 6 19.6.3 250 mm dia. R.C.C. pipe Metre 215 811.15 174397.25 7 19.6.4 300 mm dia. R.C.C. pipe Metre 1100 902.05 992255 FEROZPUR DIVISION-GATI SHAKTI/NORTHERN RLY Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (Zone-III) : 8 graded stone aggregate 40 mm nominal size), 19.7 inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total 19.7.1 weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 19.7.1.1 With common burnt clay F.P.S. (non Each 18 11687.1 210367.8 8 modular) bricks of class designation 7.5 Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation 19.9 concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement 19.9.1 concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : 19.9.1.1 With common burnt clay F.P.S. (non Each 15 11886.45 178296.75 9 modular) bricks of class designation 7.5 Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation 19.13 concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : FEROZPUR DIVISION-GATI SHAKTI/NORTHERN RLY Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement 19.15 concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : 10 19.15.1 With 20x20 mm square bar Each 23 461.35 10611.05 Providing and fixing in position pre-cast 19.19 R.C.C. manhole cover and frame of required shape and approved quality Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse 19.27 sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : 19.27.1 With common burnt clay F.P.S. (non Each 15 5589.45 83841.75 11 modular) bricks of class designation 7.5 Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in 19.28 cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design : 19.28.1 With common burnt clay F.P.S. (non Each 17 6258.2 106389.4 12 modular) bricks of class designation 7.5 Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse 19.29 sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design : 19.29.1 With common burnt clay F.P.S. (non Each 19 10596.95 201342.05 13 modular) bricks of class designation 7.5 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 19.30 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 mix(1Cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm 19.30.1 deep for single pipe line : 19.30.1.1 With common burnt clay F.P.S. (non Each 5 6431.3 32156.5 14 modular) bricks of class designation 7.5 Total 2231380.30 Item- 17 CODE-21 ALUMINIUM WORK S No. Item No Description of Item Unit Qty Rate Amount 21.0 ALUMINIUM WORK FEROZPUR DIVISION-GATI SHAKTI/NORTHERN RLY Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required 21.1 EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.2 Powder coated aluminium (minimum Kg 400 466.3 186520 1 thickness of powder coating 50 micron) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent Kg 70 531.8 37226 or dyed to required shade according to IS: 2 1868, Minimum anodic coating of grade AC 15) 21.1.2.2 Powder coated aluminium (minimum Kg 250 564.8 141200 3 thickness of powder coating 50 micron) Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in 21.2 panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 21.2.1 Pre-laminated particle board with Sqm 130 965.1 125463 4 decorative lamination on one side and balancing lamination on other side Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm thickness Sqm 86 1325.55 113997.3 5 (weight not less than 12.50 kg/sqm) 21.3.3 With float glass panes of 8 mm thickness Sqm 30 1496.15 44884.5 6 (weight not less than 20 kg/sqm) 21.10 Providing and fixing double glazed Sqm 56 4013.35 224747.6 hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing 7 EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. FEROZPUR DIVISION-GATI SHAKTI/NORTHERN RLY Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless 21.11 steel screws etc. to the side hung windows as per direction of Engineer-in-charge complete. 8 21.11.1 205 X 19 mm Each 55 292.8 16104 9 21.11.3 355 X 19 mm Each 40 289.05 11562 10 21.11.5 710 X 19 mm Each 30 1265.75 37972.5 Total 939676.90 Item- 18 CODE-23 RAIN WATER HARVESTING TUBEWELLS S No. Item No Description of Item Unit Qty Rate Amount 23.0 RAIN WATER HARVESTING & TUBEWELLS Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore 23.1 log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. 23.1.1 All types of soil 1 23.1.1.1 300 mm dia Metre 80 592.05 47364 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore 23.2 log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 23.3 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 2 23.3.1 100 mm nominal size dia Metre 35 553.2 19362 3 23.3.3 200 mm nominal size dia Metre 65 951.95 61876.75 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 23.4 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in- charge. 4 23.4.1 100 mm nominal size dia Metre 45 579.95 26097.75 5 23.4.3 200 mm nominal size dia Metre 36 1099.25 39573 23.5 Supplying, filling, spreading & leveling cum 25 1302.3 32557.5 stone boulders of size range 5 cm to 20 cm, 6 in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. FEROZPUR DIVISION-GATI SHAKTI/NORTHERN RLY 23.6 Supplying, filling, spreading & leveling cum 20 1309 26180 gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of 7 boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 23.7 Supplying, filling, spreading & leveling cum 20 1309 26180 coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over 8 gravel layer, for all leads & lifts, all complete as per direction of Engineer -in- charge. Providing and fixing Bail plug/ Bottom plug 23.15 of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 9 23.15.3 200 mm dia Each 30 308.55 9256.5 Total 288447.50 Item- 19 CODE-25 STRUCTURAL GLAZING ALUMINIUM COMPOSITE PANEL S No. Item No Description of Item Unit Qty Rate Amount STRUCTURAL GLAZING ALUMINIUM 25.0 COMPOSITE PANEL 25.2 Designing, fabricating, testing, protection, Sqm 31 3111.35 96451.85 installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: (a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminium sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum- smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including: (b) Fabricating and supplying serrated M.S. hot dip galvanised/Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimensional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon separator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. (c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved 1 sealant design, within and all around the perimeter for holding glass. (d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the FEROZPUR DIVISION-GATI SHAKTI/NORTHERN RLY site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight. (e) Making provision for drainage of moisture/water that enters the curtain glazing system to make it watertight, by i n c o r p o r a t i n g principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastage etc, enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, duly approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. FEROZPUR DIVISION-GATI SHAKTI/NORTHERN RLY 25.3 Providing, assembling and supplying vision Sqm 6 3377.5 20265 glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the 2 glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.25.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. FEROZPUR DIVISION-GATI SHAKTI/NORTHERN RLY 25.8 Design supply & installation of suspended Sqm 35 8230.05 288051.75 Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and 3 approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured. Total 404768.60 Item- 20 CODE_26 NEW TECHNOLOGIES AND MATERIALS S No. Item No Description of Item Unit Qty Rate Amount 26.0 NEW TECHNOLOGIES AND MATERIALS FEROZPUR DIVISION-GATI SHAKTI/NORTHERN RLY Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM

horizontal suspended on inter-locking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black),comprising of main-T runners 26.23 of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L- shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 26.23.1 With 15 mm thick integral densified micro Sqm 80 2055.65 164452 1 edge light weight calcium silicate false ceiling tiles FEROZPUR DIVISION-GATI SHAKTI/NORTHERN RLY Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and 26.26 secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L- shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 26.26.1 With semi perforated 12 mm thick micro Sqm 70 1690.45 118331.5 2 tegular edged GRG false ceiling tiles. 26.28S REPAIR AND REHABILITATION ITEMS 26.40 Providing and fixing hard drawn steel wire Sqm 50 820.8 41040 fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means 3 of "L" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge. Total 323823.50

Item Breakup - B-HOTRICULTURE

in 45 cm Cement Pot as per direction of the officer-in-charge. FEROZPUR DIVISION-GATI SHAKTI/NORTHERN RLY 5.33 Providing and Displaying Golden Bottle Each 50 973.75 48687.5 brush Topiary well developed with fresh & 9 healthy foliage 5 to 6 big ball 115 to 180 cm ht in 40 cm Cement Pot as per direction of the officer-in-charge. 5.35 Providing and Displaying Latania Rubra Each 100 1025 102500 Palm well developed with fresh & healthy 10 foliage 150 to 180 cm ht. with 6 to 7 leaves in big 35 cm Cement Pot as per direction of the officer-in-charge. 5.38 Providing and Displaying Topiary of Ficus Each 50 1291.5 64575 Bush King well developed with fresh & healthy foliage from Top to Bottom with 11 single piller 60 to 75 cm spread, 210 to 225 cm ht., in 35 cm Cement Tray/Cement Pot as per direction of the officer-in-charge. Total 1342790.00

Item Breakup - C-NS ITEMS

NS-1) "Providing and fixing Health Faucet Each (KUP- 35041PM) 2 Way Bib Cock with Wall Flange Water Jet Spray-Hand Shower-ALD- 573 (Health Faucet) with 8mm Dia, 1,2 Meter Long Flexible Tube & Wall Hook Providing and fixing Health Faucet (KUP- 35041PM) 2 Way Bib Cock with Wall Flange Water Jet Spray-Hand Shower-ALD-573 (Health Faucet) with 8mm Dia, 1,2 Meter Long Flexible Tube & Wall Hook and direction of Engineer-in-charge (Ref: As per Budgetary quotation)"

NS-2) Providing and fixing Toilet Roll Holder Each (ACN- 1153S) with Stainless Steel Flap

NS-3) Providing and fixing Soap Dish Holder Each (ACN- 1131N)

NS-4) Providing and fixing Basin faucet Each Concealed Part (ALD-441) Regular Body of Single Concealed Stop Cock (Composite One Piece Body) with Cartridge, Exposed Part (KUP-35441KPM) Exposed Part Kit of Single Concealed Stop Cock Consisting of Operating Lever, Cartridge Sleeve, Wall Flange (with seals) & Basin Spout (Compatible with ALD-441)

NS-5) Providing and fixing Towel Ring (ACN- Each 1121BN) Round with Round Flange

NS-6) Providing and fixing Double Arm Wall Each Mounted Reversible Plain/Magnifying (x3) Pivotal Mirror (ACN- 1193N)

NS-7) "Providing and fixing Wall Mounted Each EWC(ARS- WST-39953BIUFSM) Rimless Wall Hung WC with UF soft close seat cover, Hinges, Accessories Set of Size: 345x490x360mm (Ref. As per Rate Analysis)"

NS-8) "Providing and fixing Curved shaped Each urinal partition with frosted glass Glass:8mm/10mm (1810- UC/1110UC) (Ref: As per Rate Analysis)"

NS-9) Providing and fixing Soap dispensor Each with glass bottle (ACN-1135N) (Ref: As per Rate Analysis) FEROZPUR DIVISION-GATI SHAKTI/NORTHERN RLY

NS-10) "Providing fitting and fixing of Each Modular toilet Enclosure made out of 12mm thick High Pressure Laminate of approved color and texture with door size 1925mm (H)x600mm (W) divider size 2100mm (H) overall height of cubicle 2100mm (including bottom gap of 100mm) of merino or equivalent make including cost of all fitting, accessories, labour etc all complete as per direction of Engineer-in-Charge. (Ref: As per Budgetary quotation)"

NS-11) "Providing and fixing white vitreous Each sensor operated Gents Unnal having pre & post flushing with water having water inlet from back side, including fixing of control plate (Made of stainless steel-sensor) to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge (Ref: As per Budgetary quotation)"

NS-12) "Providing and fixing of metropole Each flush valve dual flow (3lits/6lits with 40 mm size with concealed body made of stainless steel jaquar make Product code- FLV-CHR- 1093NSQ) (Premium quality) as per direction of Engineer-in-charge (Ref: As per Budgetary quotation)"

NS-13) Providing and fixing 160mm PVC Metre Rain Water Pipe (Ref: As per Budgetary quotation)

NS-14) "Providing and laying premium Sqm quality ceramic wall tiles 600x300 mm sizes of kajaria make Celebration crema with Sugar finish of approved quality, colours and shade, laid over 12mm thick bed cement mortar 1:3 (1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc complete (Ref: As per Rate Analysis)"

NS-15) "Providing and fixing for wall Sqm panelling 9mm BWP water proof marine ply on plane wall surface (Ref: As per Budgetary quotation)"

NS-16) "Providing and fixing Marino Acrylic Sqm sheet on wall panelling including all fitting, pasting with special adhesive, lock band with steel group parition between joints (Ref: As per Budgetary quotation)"

NS-17) "Supply of 12mm saint gobin of Square equivalent crystal clear glass of required Foot size for partition (Ref: As per Budgetary quotation)"

NS-18) "Charges for making 12mm froasted Square for privacy/durabilty/safety purpose and Foot installation charges of 12mm glass including cutting, bending, edge finshing with all fittings and fixing. (Ref: As per Budgetary quotation)" s FEROZPUR DIVISION-GATI SHAKTI/NORTHERN RLY

NS-32) Manufacturing, supplying & fixing of Each pr-fabricated RCC coping stone of size 530mm x 1125mm x 100mm thick as per top face designed and approved by site Engineer with M-30 grade RCC with 8 mm dia. tor steel at 150mm c/c both ways and manufactured by vibro compaction process using jointless FRP/GRP steel moulds of required size, shape & design. The item includes cost of cement, reinforcement, transportation etc. (Note : Under layer of cement mortar to be laid as per site conditions & should be paid for separately)

NS-7) Item rate for making cutting Metre arrangement for expansion joints with diamond cutter of reputed manufacturer with skilled workmanship to provide sharp edge cut & required depth including all labour, T&Ps, removing debrish etc. with all loading, leading, unloading, taxes, GST etc. complete job as per instructions of site engineer

NS-2) "Fabrication supply and installation of Each stainless steel waterbooth made of stainless steel pipe of 150 mm dia and 3.15 mm thick stainless steel sheet for basin minimum 3 mm thick conforming to SS grade 304 or superior including cost of taps & GI pipes avobe the PF surface but excluding gratingand other items below platform surface including stainless steel base plate of 300x300x12 mm. The approximate weight of stainless steel sheet to be used in waterbooth should be 116 kg .

Providing architectural painting, Swachhha Sqm Bharat painting or any other local art painting on boundary wall and service building wall with tools, materials, equipment, transportation, cost for preparation of surface, painting etc. by deployment of artisan, painters and labourers as per direction of Engineer-in- Charge.

Supplying, fitting, fixing of sand stone Sqm statues of decorative ornamental carved structure of 6 feet height. The rate includes cost of loading, transportation, unloading, placing at the required locations as directed by the Engineer-in-Charge at site. The rate also includes all lead, lift, tools and plants, machineries, all taxes including GST applicable.

Concrete sculpture - Providing, fitting, fixing Each different mode of sculptures using RCC work including chicken mesh and sculpture remain attached to the solid background of the same material and design may be embodied in free standing objects and in live size using downgraded chips. Cement as required ratio with need to get uniform surface and finishing and applying colour including creative involvement with skilled artisans with installation all complete as per direction of Engineer-in-Charge.Casting it in a mould hollow form of plaster. The inner surface of the mould is coated with a substence like shellack to ensure the sculpture does not stick to it. Total 12114956.14 FEROZPUR DIVISION-GATI SHAKTI/NORTHERN RLY