GE/BAS44/2022-23 SPECIAL REPAIR TO BLDG NO. P 51 TO 04 OR MD ACCN OF B MED REGT AT BASOLI GNR UNDER GE BASOLI AND JANGLOT

Amount

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) complete all as specified and as directed.

M&L Box type steel windows and ventilator comprised of tubular frame and shutters made out of 1.25 mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F pressed steel frame (factory made) made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) in hollow portion and back of chowkhats, including two coats of synthentic enamel paint, complete all as specified and as directed.

S&F pressed steel frame (factory made) made out of MS sheet 1.25mm thick of size 105x60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint all as specified. all as specified.

S&F 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panel only) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and style as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated fitted to chowkats complete all as specified and as directed.

S&F 2nd class hard wood 35mm thick glazed and skeleton door shutters (factory made), open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per clause 8.20 (a) of SSR Part-I 1991 (Larger size to be provided) complete all as specified and directed

M & L preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet used instead f plain colour PVC sheet & edges will be painted to matc wit printed sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing

S&F factory made solid panel PVC door shutter (factory made) 28 to 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frames shall be covered with heat moulded wood grain printed PVC 'C' channel having a PVC sheet strip of 20 mm thick width stuck inside in solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail : Paneling of wood grain printed PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with 5mm x 15mm wide PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 75x50 mm for cupboard with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (using 12.50 mm graded stone aggregate) back of chowkhats and including two coats of synthentic enamel paint complete all as specified and as directed.

S&F 18/19mm thick prelaminated decorative choice, printed PVC board (weight not less than 12 Kg/Sqm) duly edge bonded with 0.8mm thick PVC taping as in cupboard/kitchen cabinet shutters fitting complete all as specified and as directed.

S & F 30mm continuous (piano) hinges, mild steel, bright finish or electro galvanised, complete all as specified and as directed.

S & F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm fixed with stainless steel wire staples complete all as specified and as directed.

M&L for 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane all as specified and directed.

M&L for 3 mm thick Figured glass, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane, complete all as specified and as directed.

S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and as directed.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed, complete all as specified and as directed.

S&F for aluminium anodized barrel tower bolts 100 mm of extruded section and fixed, complete all as specified and as directed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and as directed.

S&F 100 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and as directed.

S&F 300 mm MS Rat tail door spring for door closer,complete all as specified and as directed.

S&F 100 mm long hasp and staple , mild steel , wire type stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified.

S & F 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and as directed.

S & F Curtain rails 25 mm, anodised aluminium alloy with bracket ,end bulbs, fancy type, fixed in postion, complete all as specified and as directed.

Demolitin of brickwork built in cement mortar including all quions ,arches,pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles, complete all as specified and as directed.

M & L for brick work (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:6) complete all as specified and as directed.

M & L for brick work (except bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:6) complete all as specified and as directed. NOTE:- Old bricks shall be used as directed.

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M&L rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete inluding preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coats of distemper oil emulsion over a coat of primer on new surfaces complete all as specified and directed.

M&L for rendering 5.0 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement over and inluding three coats of white wash on surface of ceiling including preparation of new plastered surface, complete all as specified and as directed.

M&L rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) in two layers (5mm finishing layer over 10mm base layer) finished even and smooth without using extra cement with WPC over finishing layer complete all as specified and directed (Note:- WPC shall be measured and paid seperately)

M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas, roof projections etc, including taking out peeled off plaster / concrete and making the line in true shape and finishing the surface without using extra cement, complete all as specified and as directed.

M&L Preparing new surfaces, plastered or unplastered of walll/facia/chajjas etc and applying two coats of weather proof exterior emulsion paint over a coat of primer on walls, complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L for cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight, complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in coloured cement ouer screed bed or bedding layers of mortars 15 mm thick in CM 1:4 incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing removing serviceable tiles from site and rubbish off the premises complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement, over screed bed or bedding layers of mortars 15 mm thick in CM 1:4 incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing removing serviceable tiles from site and rubbish off the premises complete all as specified and as directed.

M&L for non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in skirting/dado/risers of steps etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. incl rendering 10mm thick in CM (1:4) and finished rough, incl taking down cement plaster on walls etc complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface 450x300x6-7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing removing serviceable tiles from site and rubbish off the premises complete all as specified and as directed.

M&L machine cut 18 to 20mm thick Granite of approved colour, as in cooking plateforms and like in cement mortar ( 1:4 ) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes, complete all as specified and as directed.

M&L for rounding/moulding to edges of stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooking platform , and other similar position etc inlduing making holes in slab for passing gas pipe, complete all as specified and as directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia all as specified and directed.

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.

M&L for refixing of old steel tubing 15 mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc complete all as specified and as directed. NOTE :- Old pipe shall be used in work as directed.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.

M&L for refixing of old steel tubing 20 mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc complete all as specified and as directed. NOTE :- Old pipe shall be used in work as directed.

M&L cutting chases pinning in brick masonry and making good to facing where required and pointing in cement and making good in CM 1:3 cutting n.exc. 10 cm in girth complete all as specified and as directed.

S & F in repairs Stop valve/ Angle valve cast copper alloy (ISI Marked) chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia, in reapirs complete all as specified and directed.

S & F in repairs Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia in repair, complete all as specified and directed.

S&F in repair Bib taps for 15 mm bore pipe, cast copper alloy screwed down crutch butterfly handle with brass furrelo fixed in repairs complete all as specified and as directed.

S & F in repairs Vitreous china wash basin, white flat back,size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed in repair including waste copling 32mm size full thread , all as spd and directed

S&F 15mm bore pillar cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked, fixed in repairs, complete all as specified and as directed.

S&F in repair towel rail CP 600 mm long, including brass screws, complete all as specified and directed.

S& F in repair CP Shower rose with or without swivel joints, any size,including fixing to steel pipe or union complete all as spd and directed.

S& F Shelf of PTMT , size 600x600mm with glass , Prayag modal PTMT-554 or equivalent in Jaquar, polytuf, Pearl and fixed with and including Chromium plated brass screws and wooden/plastic cleats, complete all as specified and as directed.

S & F chromium plated Soap dish, approx size 16x160x90mm any type, fixed to plugs with chromium plated brass screws, complete all as specified and as directed. Make Prayag Shakti, Jaquar, Pearl, Polytuf.

S&F in repair Vitreous China squatting pan of orissa pattern, size 580x440mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern (including fixing of flush pipe) including provision of cement concrete bedding, in repair complete all as specified and as directed.

M&L for PCC 1:5:10 type E2 using 40mm graded stone aggregate as in foundation, filling in, and mass concrete (sunken floors etc.) complete all as specified and as directed.

M&L for Rendering 15mm thick on brick work or concrete surfaces in CM 1:4 with and including water proofing compound to sunken portion with proper slope towards outside and finishing cement concrete or brick work surface even and smooth using extra cement including application of 90 micron polythene film and applying bitumen coating @ 3.00 Kg/Sqm (WPC shall measured and paid separately) all as specified and directed.

S&F in repair PVC flushing cistern 10 ltr capacity including PVC connection inlet and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC, complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. Make:Paryag/Polytech

S&F Rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing RCC/ PVC tank of any capacity complete all as specified & directed.

S&F in repair 20 mm size gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore, complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes 100 mm dia (any size or pattern) including all fitting ,head ,shoes ,bend, swan-nacks etc., including cleaning or refixing or removal to store, complete all as specified and as directed.

S&F PVC(SWR) pipes 110mm bore, single socketd , in any length with rubber ring joints , in any length fixed to walls, complete all as specified and as directed.

S&F PVC (SWR) bend any radius 110mm dia bore, complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore 75 mm including dismantling of old unserviceable pipes, complete all as specified and as directed.

S & F 75mm dia PVC (SWR) bends any radius, complete all as specified and as directed.

S&F 110mm bore PVC (SWR) branch piece, double (double Y) equal or unequal, complete all as specified and as directed.

S&F 110mm bore, PVC (SWR) 'P' or 'S' traps, complete all as specified and as directed.

S & F 75mm size PVC (SWR) Vent cowls, complete all as specified and as directed.

S&F in repair PVC floor trap 100 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with ot without hole for waste pipe complete all as specified.

S&F sinks with drainage board made of stainless steel 1.0 mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460mm bowl size 410mm x 330mm x 160mm complete all as spd & directed.

S&F stainless steel kitchen plate rack of size 750mm x 600 mm of approved design and make fixed with mild steel screw, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for complete all as specified and as directed.

M&L PCC 1:2:4 type B-0 padding as roof , surface finished even and smooth without using extra cement, laid in thickness specified, complete all as specified and as directed.

M & L for cement concrete (1:2:4) type " B1 " ( using 20 mm graded stone aggregate) as seismic, plinth and similar bands, coping, kerbs, cills, steps, parapets, apex stones, bed plates, kerbs, railings up to 60 cm in height, water troughs and the like rounded or chamfered on edges including necessary form work. ( Item also applied in broken RCC chajjas and roof projection )

M&L for 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement, complete all as specified and as directed.

M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3.0mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap.(e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.

Supply only liquid water proofing compound, ISI marked, complete all as specified and as directed.

M & L for cleaning, breaking, loose concrete, cleaning of reinforcement and filling plain cement concrete 1:1 1/2 :3 type B0 using 12.5mm graded chrushed stone aggregate at places as directed including necessary scafoldings, formworks, complete all as specified and as directed. NOTE:- The cost of necessary form work, scafolding etc shall be deemed to be included in the quote rate of item.

M&L PCC 1:2:4 type B-1 (using 20mm graded aggregate) as in surface channels & drains,benching of manholes complete all as specified and as directed.

M&L Salt glazed stoneware (SGSW) grade 'A' drain pipes 150mm bore laid and jointed on concrete bed, complete including testing etc all as specified and shown drawings inluding demolition of old u/s SGSW pipe & Concrete bed of any dia (Concrete bed shall be assured and paid for separately)complete all as specified and as directed.

M&L concrete bed to drain pipes including benching under and haunching in cement concrete 1:3:6 type C2 for 150 mm dia pipe complete all as specified and directed.

M&L cutting into existing manholes (150mm dia pipe) for connecting new drains,making good to pipe and rendering,cutting out existing benching for and forming branch cahnnel(1/2 round or 3/4 section) incement concrete 1:2:4 type B-1 smooth finished and reforming benching as required all as spd and directed.

M&L for Durastone / Endura heavy duty vitrified tiles of size 300mm x 300mm x 8-9 mm thick set jointed and pointed in neat cement slurry in floors with grey cement over 15 mm thick screed bed of 1:4 cement mortar over and including 75 mm thick PCC 1:3:6 type C-2 ( using 40mm graded stone aggregate) finished cement concrete surface fair & smooth without using extra cement complete all as specified and directed.

M&L cement concrete type B-1 (1:2:4) (20 mm graded aggregate) as in kerb stones ,coping, bed plates and the like including weathering, slightly roundered or chamfered angles and throating, as directed including necessary form work and finishing complete all as specified.

M&L Machine cut kota slab fooring 18 to 20mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing,and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes complete all as specified and directed.

M&L Machine cut kota slab skirting 16 to 18mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing and taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles complete all as specified and directed.

M&L for PCC 1:2:4 type ‘B1’ (using 20mm graded stone aggregate) in coping, benching of manholes etc and including necessary formwork and including demolitions of existing concrete, complete all as specified and as directed.

M&L for RCC 1:2:4 type ‘B1’ (using 20mm graded stone aggregate) in precast manhole cover and cover slab for septic tanks and including necessary forms and moulds etc and set in cement mortar 1:6 and including demolition of old slab complete all as specified.

M&L for TMT bars 10 mm dia & over cut to length bent to shape required including cranking bending spirally for hoping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or seuring with chip with deep quality confirming to FE 500/FE 500D, complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including including Dismantiling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings, complete all as specified and as directed.

Mild steel Framed work as in door or gates or ladders of angle Iron or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Dorrs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging dooe fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of Gde Fe 410-O or Fe 310-O, complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials items of credit from site and making good disturbed surfaces of walls, floors, etc.

M&L for Point wiring with 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable in and incl rigid PVC conduit concealed medium grade with PVC terminal sunk boxes with suitable thickness plastic laminated sheet cover 3mm thick of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and directed by Engr-in-charge. NOTE :- a) Rate for cutting chases for conduits and sinking for boxes and making good to wall, floors deemed to be included in each point etc (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for any necessary point with proper fixing clips and no extra cost shall be paid for the job etc all as directed.

All as per item No 100 but for one 3 pin 5 Amp socket outlet on independent board.

All as per item No 100 but for one 3 pin 5 Amp socket outlet on same board.

M&L for Point wiring with 2.5 sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable drawn in and including rigid PVC concealed conduit medium grade of suitable size with sunk cast iron/pressed steel terminal boxes(sheet not less than 1.6mm thick) of adequate size with suitable thickness plastic laminated sheet cover 3mm thick for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm FRLS,PVC insulated and unsheathed copper conductor cable (multistranded) as earth wire to common earth dolly, complete all as specified. .

All as per srl item No 100 here in before but one bell/buzzers point controlled by one push button on the same board with other inner switches or independent with cable 1.5 sqmm size complete all as per specified and directed.

Supplying & Fixing switch piano flush button single pole one way 5 amps 230 volts, complete all as specified and directed

Supplying & Fixing Switch socket combination 2 in 1, 5 pin, 5 Amp flush type, complete all as specified and as directed.

Supplying & Fixing socket outlet 5 amps 5 pin flush type, 230 volts, complete all as specified and directed.

Supplying & Fixing socket out let, 6 pin, 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts, complete all as specified and directed.

S&F ceiling rose surface bakelite two to three terminal isolated body fixed on PVC round block complete all as specified.

S&F in replacement LED tube light fitting 1x16w,230v including LED tube rod with polycarbonate diffuser, 4 feet fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size. complete all as specified

S&F in replacement LED tube light fitting 1x10w,230v including LED tube rod with polycarbonate diffuser, 2 feet fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size. complete all as specified

S&F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for batten fittings, complete all as per specified and directed.

S&F Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, Min air delivery 210 CFM with service valu 6.00 BEE. Five Star rated with brushless direct current motor all as specified and directed.

S&F in replacmenet sheet metal powder coated vertical double door single pole and neutral (SPN) distribution board for MCB provision 230 Volts 50 Hz AC supply for 8 Way fitted with copper bus bar rated 200 Amps, neutral link, earth bar complete all as specified.

S&F MCB SPN 40 Amps with 10 KA Breakiing capacity of C series in distribution boards all as specified and dirrected.

S&F MCB SP 40 Amps with 10 KA Breakiing capacity of C series in distribution boards all as specified and dirrected.

S&F MCB SP 6-32 Amps with 10 KA Breakiing capacity of C series in distribution boards all as specified and dirrected.

S&F in replacmenet sheet metal enclosure with socket plug top and 20 Amps MCB single Pole and neutral 240 Volts, AC 50 Hz complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate up to 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe up to main board, funnel with wire mesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include cost of min 7.5 metre earthing wire .)

S&F in Replacement of existing sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 4.0 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 4.0 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 4.00 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 4.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

S&F in replacement sheet metal powder coated VTPN DB double door 4 way with MCCB 63 amps, 415 Volts, 50 Hz AC 16 ka 4 pole with copper bus bar rated 200 amps neutral link, earth bar and din rail for fixing the MCB,s complete all as specified . Note :-MCB,s Shall be measured and paid seperately in relevant item.Make - Legrand /C&S / IndoAssian

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre,BEE 5 Star rated complete with all accessories such as safetyvalve,thermostate,NRV,connection piece etc complete all as specified and directed.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5mtr in depth for foundation of pole and laying of UG cable and getting out in any type of soil complete all as specified and directed.

Returning, filling in, and including spreading, levelling, watering and well ramming in layers not exceeding 25cm completed all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5M above the starting point complete all as specified and as directed.

Supply & laying of approved quality sand under cable upto 15cm before laying the cable and 8cm over the cable after laying, punned down to overall thickness of 18cm in trenches for cable cushioning complete all as specified and directed. (Punned thickness shall be measured)

Material and labour for well burnt, old size Sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable with width equal to length of brick complete all as specified and directed.

Supply and laying in trenches or fixing or passing through pipe,1100 volt grade heavy duty cable with XLPE insulated aluminium conductor ,served with an inner sheathing of PVC tape armoured with galvanised steel of size 16 sq mm X 4 core stranded conductor, complete all as specified and directed.

Supply and laying for 20 mm bore dia of Galvanised iron tubing "Medium grade" laid in trench, walls and ceilings or laid in floors with all fittings such as tees,bend,elbows,sockets reducer ,nipples and union including taking out old unserviceable GI tubing complete all as specified and directed.

Supply and fix in repair for 20 mm bore dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply and laying for 15 mm bore dia of Galvanised iron tubing "Medium grade" laid in trench, walls and ceilings or laid in floors with all fittings such as tees,bend,elbows,sockets reducer, nipples and union including taking out old unserviceable GI tubing complete all as specified and directed.

Supply and fix in repair for 20 mm bore dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Ms International Engineers

G.M. ENGINEERING SERVICES