Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹10.3 L
Closing Date
3 Apr 2025, 3:00 pmClosed
BDO
T.Kallupatti
Madurai District Renovation of Two Instructors Leature Quarters Twin Type One Block in T.Kallupatti RIRD Campus T.KALLUPATTI Block
2025_RDTN_537081_1
001/TKP/ RIRD /2024-2025
Open Tender
Civil Works - Buildings
Works
T.Kallupatti
Class III
2 documents required · 2 mandatory
₹0
Exempted
9 Apr 2025
1 Apr 2025
3 Apr 2025
1 Apr 2025
3 Apr 2025
1 Apr 2025
Amount
Madurai District Renovation of Two Instructors Leature Quarters Twin Type (One Block ) in T.Kallupatti RIRD Campus
Clean removal of cement plaster from walls (SI No.W -0104)
Clean removal of cement plaster from walls and racking out joints 20mm deep (SI No.W - 0105)
Dismantling and Removing of Wooden Doors SI No W-0029
Removing of Indian water claset in all labour charges etc,.
Earth work excavation for foundation in all soils and sub soils to full depth etc., ordinary soil complete
Supplying and filling in foundation, basement, etc with filling M.Sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
Cement Concrete 1:4:8 (One Cement, Four M.Sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification
Brick work using country bricks of size 83/4"x41/4"x23/4" in cement mortar 1:5 (One cement and five M.Sand) including curing neat finishing, etc., complete complying with standard specifiction.
Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)
Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)
R.Cement Concrete 1:1-1/2:3 (One Cement, One and a half crushed stone M.Sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M.Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers
Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter M- 0392
Pointing with CM1:3 mix in Roof top Pressed tiles in all material to site in all labour charges etc,.
Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The wall putty shall be got approved by the Executive Engineer before use of work).
Plastering with cement mortar 1:4mix to 12 mm thick includingcost and conveyance of all materials to site and all labourcharges etc,.
Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.
Distempering the old walls and ceiling one coat with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying with standard specification and as directed by the Departmental Officer
Painting two coats with ready mixed Plastic emulsion of first class quality paint and of approved colour over a priming coat ,inculding through scrapping, clean removal of dirt etc. complete and inculding necessary plasterof paris , putty whereever required .
Painting old Steel work with one coat of best synthetic enamel paint of approved quality, colour including ordinary scrapping and preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, finishing neatly etc., complete complying with standard specification and as directed by the Departmental Officer.
Painting old wood work with one coat of best synthetic enamel paint of approved quality, colour including ordinary scrapping and preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, finishing neatly etc., complete complying with standard specification and as directed by the Departmental Officer.
Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with crushed stone M.Sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone M.Sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).
Europeon Water Closet with all fittings and 10lit capacity flusing tank in all material to site in all labour charges etc,.
Supplying and fixing PVC Rain water down fall pipes of following dia meter etc., complete.in all Charges etc,.
Replacement of Rain water stone ware pipe in all charges etc,.
Wiring with Light point SD No :20
Wiring with Pluge point SD No :36
Wiring with Powe Pluge point SD No :39
Wiring with Fane point SD No :22
Supply and fixing of Tube light Fitting SD 88
Supply and fixing of CFL SD No :80
Supply and fixing of Ceiling Fane SD No :107
Supplyandfixingof300mm(12")sweep(lightduty)ACexhaustfancompletewithnecessarywallopeningandmakinggood of the wall SD 114
Providing for Rainwater harvesting Structure in all charges etc,.
Supply and fixing of Mosquito net arrangements including all charges etc,.
Providing and laying of pest control (Termide)
Supply and fixing of SS Chimny in all labour charges etc,.Local Rate Qurtation
Supply and fixing of Manhole cover and Chamber slab in all labour charges etc,.M-0640
1000lit Sintex tank WD-M1417
20mm dia UPVC shower valve M-0506
20mm dia UPVC MTA (local rate)
20x15mm Brass Elbow (local rate)
15mm dia Brass Tap M-0509
15mm dia Cock Tap M-0529
25mm dia PVC Pipe for 10 kg/m2 M-0876
25mm dia PVC Elbow M-0888
25mm dia PVC Tee M-0900
25mm dia PVC MTA WD M0114
25mm dia PVC FTA WD - M 0116
25mm dia PVC Union (local rate)
25mm dia PVC Coupling M - 0882
25mm dia PVC Palvalve (local rate)
25x20mm dia PVC Reducer M 090
25x15mm dia Brass Reducer (local rate)
25x15mm dia PVC Reducer Tee (local rate)
20mm dia PVC Pipe M-0875
20mm dia PVC Elbow M-0887
20mm dia PVC Tee M-0899
20x15mm PVC Tee (local rate)
20mm dia Tank nipple M-1194
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
U M VIKAS (BID ID -1283036)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .