Providing and Fixing New Children Play Equipments in various Parks Green Belts of Sector 52,61 and Kajheri Chandigarh under Ward Development Fund.

Multi Activity play System (1) Deck 3’Ht. : 1 FRP Stair case 2:5’ Ht. : 1 Bowl Slide 3’ Ht. : 1 Roto Railing : 1 Steering Wheel : 1 Horizontal Climber 3’ Ht. : 1 Double Swing with Seat : 1 Area : 5 mx 4 m Safe Area : 6 m x 5 m Deck 3’ height. The Deck of MAPS is made up of 4mm thickness fiberglass reinforced plastic. The top of the platform shall be made up of anti skid surface with multicoloured pigment resign. The back coat of fibre-reiniorce plastic shall be such that the mat stands are No.t visible and the surface is tack free. The FRP shall be reinforcement. The vertical supports of the platform are made up of 80 NB GI pipes. The size of platform is 1.6Mx1.6M. FRP Stair case 2.5’ Ht. The ladder shall be made up of the Fiber Reinforced Plastic with a conservative thickness of 4mm. Ladder should have reinforcement to maintain strength and avoid bending. The top surface of the ladder should be such that it should No.t deserve any kind of skiddy movement. Bowl Slide: Bowl Slide Sliding chute shall be made up of fiber glass reinforced plastic (FRP) moulded one and shall be with attracetive colour and shade. The desigh of FRP bowl slide shall be minimum permissible joints suitable for children. Such that child should No.t fall down while sliding down. The FRP slide shall be 3-5 mm thick. There should be suitable handgrip on the side of the slide. Roto Railing . The roto railing is providing for all the decks for safety purposes. It is made in LLDPE in rotational moulding process and has a support of 20 NB powder coated GI pipes. The railing is attached to the support pipe using a nylon clamp/ steel clamp. Steering Wheel The steering wheel is made from FRP and it is attached to the railing of the slide. This wheel gives a driving experience for the children playing on it. Horizontal climber 3’ ht. The curve climber structure is made from 25 NB GI pipes. The pipes are bended to from a semi circle. The steps of the clomber are fabricated from 20 NB GI pipes. The pipes are welded to the 25 NB frame at aspecific distance. The vertical support of the from 40 NB GI pipes. The structures are to give an esthetic look to the product. Double Swing with Bucket In the double swing the leg support is bending made of 40 nb G.I. pipes and to pipe is 50 nb G.I. pipe with G.I. junction box with powder coated. The swing seat is mae up of 10mm thick rubber belt. The belt is affixed on 6mm G.I. chain. The ball bearing are mounted inside a specially designed clamp/steel clamp.

M.A.P.S (JUMBO 3X1) Sr. No.. Description Quantity 1 Standard See Saw 1 2 Double Swing 1 3 Wave Slide 5’ ht. 1 Area : 4m x 4m Safe Area : 5m x 5m (Jumbo 3 X1) set consist of : Standard See Saw: This item provides a good entertainer for children. The seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 NB GI Pipe. The level is of 15 NB & 25 NB pipes. The bearing used is a heavy-duty bush type. Double Swing In the double swing the leg support is bending made of 40nnb GI pipes and top pipe is 50nb GI pipes with GI Junction box with powder coating. The swing seat is made up of 10mm thick rubber belt. The belt seat is affixed on 6mm rubber coated GI chain. The ball bearings are mounted inside a specially designed nylon clamp. Wave Slide: The Wave slide chute shall be made up of 4mm thick of Fiber reinforced plastic with self-pigmented. The Wave shape should be in such manner that it will No.t give any jerk or bump to the rider. The chute has its end such as it causes safe landing of the child. The landing portion should be in horizontal with respect to the ground. There should be support provided made up of 25 NB GI pipe

Big Multiplay Equipment SPECIFICATIONS:- S. No.. Description Qty. 1 SQ. Deck 7’-0” H WITH CANO.PY 1 2 SQ. Deck 5’-0” H WITH CANO.PY 1 3 SQ. Deck 3’-0” H WITH CANO.PY 1 4 SQ. Deck 4’-0” X 4’-0” WITH 3’-0” HT 1 5 STRAIGHT INCLINED BRIDGE 4’-0” LON 1 6 SWING BRIDGE 8’-0” LONG 1 7 SPIRAL SLIDE 5’-0” HT 1 8 DOUBLE WAVE SLIDE 7’-0” HT. 1 9 CROSS STAIRS 5’-0” HT 1 10 LADDER 7’-0” HT. 1 11 TRIANGULAR STAIRS 3’ HT. 1 12 SPLIT LEVEL LADDER 1 13 DOUBLE WAVE SLIDE 3’-0” HT. 1 14 EXPANSION LADDER 7:0” & 3’-0”. 1 TECHNICAL SPECIFICATIONS 1. MATERIAL A. G.I. PIPES The G.I. pipes shall be heavy duty “B” class quality and shall confirm to IS: 1239 (Part-I) – 1979 and shall be of reputed make such as Tata/Jindal etc. B. M.S. ANGLE The M.S. angles shall conform to IS: 226-1975 and shall be of standard make such as TISCO/SALE/ISCO or equivalent. C. NUTS, BOLTS AND OTHER FASTNERS: All nuts, bolts and other fasteners to be used shall be of Hot Dip Galvanized iron. D. FIBER REINFORCED PLASTIC MATERIAL FRP material shall be made of top quality, polyester resin of reputed brand, virgin quality standard glass made of reputed brand only. The moulding of FRP shall be done of contact moulding and has minimum tensile strength of 60 Mp. 2. FABRICATION:- Steel component shall be welded by electric are welding using CO2 as insert gas using best quality welding rods confirming to IS : 814. The welded joints shall be property grounded and coated with epoxy sealant. All shape dated and corners shall be properly grounded before painting. All holes shall be drilled by using specially designed hardened drilling fixture to ensure repeatability & inter chargeability of the components. 3. MOULDING:- Plastic moulded components shall be made of No.n-toxic and No.n-aging material with UV stabilizers. 4. GALVANIZING:- The minimum thickness of galvanizing shall be 20 microns. 5. PAINTING:- All uncoated and No.n protected surfaces shall first be applied with a coat of red oxide after preparation of surface and then coated with epoxy primer by spray process in a dust free atmosphere. Then a coat of epoxy paint of reputed brand with minimum thickness of 30 microns shall be applied. 6. POWDER COATING:- Powder coating shall be done of pure polyester exterior grade ultraviolet stabilized powder of reputed make which shall be applied after preparation of surface and then treated for adhesion by phosphate chemicals which will be further passivated to stop porosity. The minimum thickness of powder coating shall be 40 microns (Dry thickness). The coated item shall be then be cured in oven at 180-degree Celsius for minimum. 7. BRIEF DESCRIPTIONS/SIZES OF DIFFERENT COMPONENTS OF MULTIPLAY SYSTEMS:- i. Square deck of size 4’-0” X 4’-0”:- The size of Sq. deck shall be 4’-0” X 4’-0”. The vertical supporting pipes shall be of minimum size 80 NB G.I. pipes or as required with Nylon Roof clamps attached to its. The Horizontal supporting members shall be of M.S. angle of minimum size 40X40X5 mm or as required. The platform of the ladder shall be of aluminum chequred plate of minimum thickness 16 SWG or as required. ii. CaNo.py: - The caNo.py over square deck shall be made in two layers of Fiber Reinforced Plastic with minimum thickness of 3 mm and the same shall be supported on structural framework of M.S. Square pipe. The layers of ISO Gel coat shall be applied over caNo.py and two extra layers on the flange. The colour, design and finish of the outer surface of the caNo.py shall be as approved by Engineer-in-charge. iii. Double wave slide 3’-0” Ht.:- This shall be made of FRP having minimum shell thickness of 4 mm. The backside of the slide surface shall be Mat finished. The layers of tooling Gelcoat shall be applied to the slide to give it smooth finish. The supporting frame of the slide shall be made from G.I. Pipe of minimum size 25 NBV. The pipes shall be powder coated. iv. Double wave slide 7’-0” Ht.:- This shall be made of FRP having minimum shell thickness of 4 mm. The backside of the slide surface shall be Mat finished. 5 layers of tooling Gelcoat shall be applied to the slide to give it smooth finish. The supporting frame shall be made from G.I. Pipe of minimum size 25 NB. The pipes shall be powder coated. Additional ‘H’ type support shall be provided in the center. v. Spiral Slide 5’-0”:- The spiral slide chute shall be made of FRP having minimum shell thickness of 4 mm and the same shall be supported on center support of G.I. pipe having minimum size of 80 NB. The backside of the slide surface shall be MAT. 5 layers of tooling Gelcoat shall be applied to the slide to give it smooth finish. The landing module shall be supported on GI pipe of minimum size 20 NB powder coated GI Pipes with nylon clamps attached to it. vi. Pipe Ladder:- The pipe ladder shall be made of powder coated GI pipes minimum size 25 NB. vii. Arch entry railing:- The frame of the Arch entry railing shall be made of powder coated GI pipe of minimum size 25 NB and the same shall be supported with 25 NB powder coated GI pipes. Nylon clamps are attached to the vertical pipe support of 80 NB pipe. viii. Straight railing:- The straight railing shall be made of horizontal pipe of size 50 NB and vertical pipes of 25 NB. ix. Straight Bridge:- It shall be made of 25 mm thick wooden planks of sheesham or Sal wood having 150 mm width an 810 mm length. The wooden planks shall be attached together with the help of nuts and bolts and shall be suspended with 8 mm thick galvanized chains. The railing shall be made of powder cated pipe supported of 20 NB GI Pipe. x. Straight inclined bridge: - This small be made of MS angle iron of minimum of size 50X50X50 mm. The top surface shall be made of perforated galvanized sheet of 16 SWG and shall be supported on MS angle iron of minimum size 25X25X5mm. The side railing shall be provided on both sides for safety purpose and it shall be made of powder coated GI pipe of size 20 NB. Split level ladder: - This shall be made of fiber Reinforced plastic of minimum 4mm thickness. The purpose of this ladder is to combine suitably two decks at different height