Extension of Existing Terminal Building Apron and Allied Works at Goa Civil Enclave SH SITC of additional Passenger Baggage Handling System including merging and integration with existing Vanderlande Inline BHS and associated works

Amount

SH:I SITC OF COMPLETE INLINE PASSENGER BAGGAGE HANDLING SYSTEM SUPPLY OF DEPARTURE CONVEYOR SYSTEM Manufacturing and Supply of following equipment & components for departure conveyor system including all steel structure work suitable for support/ maintenance/ inspection of BHS compatible for existing in-line CT-EDS Baggage Screening system as per tentative layout drawing, scope of work, technical specification including supply of required quantities along with required power, control and data cables in closed cable trays, double earthing, emergency off, push button stations, isolators etc laying of cables from main panel to control panel and further distribution to various drive units including all item and accessories as per site and operational requirement including minor Civil works complete in all respect for successful commissioning of system.

Check-in conveyor system in two sections comprising of Weighing & Labeling and Dispatch conveyor of minimum length1200mm with minimum useful width of 650mm between side walls,minimum belt width of 600mm along with drum motor drive unit for each conveyor section with display range 0-200 Kg with accuracy of + 0.05% and two displays (Each for Passenger and Airlines staff) including load cells/sensors,interconnections,push button stations,emergancy off, and toppling devices, frames, Stainless Steel covers etc.as required. Note:-weighing scale display shall be suitable for RS 232 port compatible to integrate with SBDs in future for transferring baggage weight to SBD etc

Take away/Collector conveyor with minimum inner useful width of 1050mm between side walls, minimum belt width of 1000mm along with drive unit for collecting baggage from dispatch conveyor including side walls, supports etc as per technical specifications

Transport Conveyor (Straight/declined/inclined etc.) with minimum inner useful width of 1050mm between side walls,minimum belt width of 1000mm along with drive unit for each section and conveyor width to match with CT-EDS belt conveyor, side walls, supports etc. as per technical specifications

Queuing / Metering Conveyor with minimum 1500 mm length and minimum inner useful width of 1050mm between side walls,minimum belt width of 1000mmmm along with drive unit,side walls,supports etc as per technical specifications.

90° Power Curve with inner useful width of 1050mm between side walls,minimum belt width of 1000mmmm along with drive unit, side walls,supports etc as per technical specifications

Over Height check and over length check along with photo sensor to detect the over height and over length of baggage including proper stainless steel support arrangement and fault reset button etc as per the operational requirement

Draught Curtains in the openings wherever the conveyor pass through the walls (minimum size 1500mm width and 1200mm height) consisting of flexible overlapping slats of black belt strips fixed on stainless steel frame etc as per site requirement.

Motorized Rolling Shutter of fire rating minimum 2 hours as per site requirement in the wall opening including limit switches, wiring & integration with control panel, as per operational and technical specifications

INSTALLATION, TESTING & COMMISSIONING (ITC) OF BAGGAGE CONVEYOR SYSTEM Installation, Testing and Commissioning (ITC) of following items for Departure Conveyor System including minor civil works such as grouting of structures etc in line with maintaining structure stability and making good the same required for BHS including ITC of main and control panel along with laying of all necessary incoming and outgoing cables/wires in covered cable trays, earthing for drive unit motors,panels, limit switches, Emergency stop and other push buttons, indications, annunciation, insulating mat, IT network and control cables, power cabling etc. complete as required and as per layout drawing,scope of work , Technical specifications and BCAS standards.

Check-in conveyor system in two sections comprising of Weighing+Labeling and Dispatch conveyors,caliberation of weighing scales by State authority and submission of caliberation cerificate etc

Take away/collector conveyor

Transport Conveyor ((Straight/declined/inclined etc.)

Queuing / metering Conveyors

90° Power curves

Over Height check and over length check

Draught curtains

Motorized rolling Shutters.

Design, Fabrication, Supply and Fixing of mild steel(MS) structure, vibration free platform (floor mounted as well as cailing suspended) for clooector/ transport/ metering/ power curve conveyors (those MS works which are not covered under BOQ item nos. 1 & 2 (basic steel work) and their technical specifications) consisting of Sheet/plate, Angle, I-section, C-Section/Channels, Beams, Hangers, vibration pads, Support legs, Chequrred plates, Nuts and Bolts, Catwalks, Platforms, Walkways, etc. including cutting, welding, fabrication, nut- bolting, fittings, jointings, painting and minor civil works etc. suitably designed to enable maintenance personnel to inspect, operate & maintain various BHS items complete in all respect and as per site requirement,scope of work and Technical Specifications for successful testing and commissioning of the system. Approximate quantity of MS structure is 40 Tonne

Design, Supply, Installation, Testing, Commissioning, merging and Integration of the newly installed BHS system with one of the existing 'Vanderlande' make Inline BHS loop including replacement/ upgradation of existing PLC (for 01 no. merged BHS loop only) with/ without new PLC such that merged BHS loop shall function smoothly with incorporating incomer,busbars,software and hardware, outgoing MCBs, protection devices, SPP, contactors,MPCBs, all sensors ,all other required components suitable for operation & safety of complete departure conveyor system including interfacing & integration with existing CT-EDS machine etc including interconnections, supply of all associated materials like power, control cables etc along with UPS,softwere updation including Design, Supply, Installation, Testing, Commissioning and Integration of SCADA system with PLC for departure system consisting of SCADA server indicating GUI, alarm and message, start stop, LAN Profit Bus/ ProFi Net connectors, UPS etc. Job includes supply of all type of hardware and licensed SCADA software and its updation during the contract period along with redundant reporting server with necessary installations, accessories to accrue, process, store and retrieve the baggage processing data confirming to certification of TSA/ECAC and BCAS requirement including SITC of PC and colored printers suitable for printing on A4 paper etc. complete in all respect and as per scope of work,Technical Specifications for successful commissioning of the system.

BEUMER INDIA PRIVATE LIMITED (BID ID -911635)

Alstef India Private Limited (BID ID -910787)

Siemens Postal, Parcel and Airport Logistics Private Limited (BID ID -905472)

DElite System Engineering (India) Pvt. Ltd. (BID ID -901407)