WELCOME MAINT INCL BR AND EM AND OTHER CERTAIN WORKS TO OFFRS MD ACCN IN PRATAP ENCLAVE UNDER AGE BR IV OF GE (SOUTH) JAIPUR AT JAIPUR MIL STATION

Amount

Taking down cement plaster from brick/stone walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar (1:6) on any face of stone masonry walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar (1:4) on any face of stone walls or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar (1:3) on any face of ceilling, surfaces finished even and smooth without using extra cement complete all as specified.

M&L for preparation of newly plastered surface of wall and applying 2 mm thick putty in two coats to make the entire surface free from undulations and finally applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered surface of ceiling and applying 2mm thick putty in two coats to make the entire surface free from undulations and finally applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint upto two storey building including scaffolding complete all as specified and as directed.

M&L for newly plastered surfaces of walls and applying two coats of exterior acrylic emulsion paint over a coat of primer complete all as specified and as directed.

M&L for preparation of old surfaces of wall and applying one coat of exterior acrylic emulsion paint complete all as specified and as directed.

M&L for complete removal of existing treatment and applying 2 mm thick wall care putty on wall to make the entire surface free from undulations and finally applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces of wall by complete removal and applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of wall by brooming down, scraping including cornices pillars etc and applying one coats of oil bound distemper complete all as specified and as directed.

M&L for complete removal of existing treatment and applying 2mm thick wall care putty on ceiling to make the entire surface free from undulations and finally applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of old decorated plastered surface of ceiling by brooming down, scraping including cornices pillars etc and applying one coats of oil bound distemper complete all as specified and as directed.

M&L for complete removal of existing surafces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying two coats cement base paint complete all as specified and as directed.

M&L for preparation of old decorated plastered/unplastered surfaces of wall by brooming down, scraping including cornice pillars etc and applying one coats cement base paint complete all as specified and as directed.

M&L preparation of old plastered surfaces of wall by brooming down including cornices,pillars etc and aplying one coat of white wash on walls complete all as specified and as directed.

M&L preparation of old plastered surfaces of ceiling by brooming down including cornices, pillars etc and aplying one coat of white wash on ceiling complete all as specified and as directed.

M & L for applying 1 mm thick wall care putty on wall including preparation of surfaces with rubbing down to make the entire surface free from undulations to match surface of existing wall complete all as specified and as directed.

M&L preparing old surfaces of wood or wood based material of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L preparing old surfaces of wood or wood based material of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old steel surfaces over 10cm width or girth of any description and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L preparation of old painted concrete surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

S & F in repairs stop valve fancy type of 15 mm bore cast copper alloy chromium plated screwed down, high pressure, with crutch or butterfly handle, long shank and cup (concealed type) screwed both ends for iron pipes or for unions complete all as specified and as directed.

S & F in repairs 15 mm bore long body Bib tap cast copper alloy chromium plated fancy type and screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repairs chromium plated 15 mm bore pillar taps, fancy type screwed down high pressure, with or with out lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts complete all as specified and as directed.

S&F in repairs 15 mm bore brass chromium plated Wall Mixer for mixing hot & cold water secewed down for iron pipe complete all as specified and as directed.

Supply and fixed in repairs fancy type chromium plated angle cock 15mm bore cast coper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. Make-Jaquar Cat. No. FUS-CHR-29053/Kohler Cat No K-117911 or equivalent, Model of make specified in Appendix B as approved.

Supply and fixed in repairs 15 mm bore chromium plated central Hole Basin Mixer with Regular Spout without Popup Waste System with 450mm Long Braided Hoses, 20mm Cartridge size etc with all accessories as provided by manufacturer complete all as speciifed and as directed. Make-Jaquar Cat. No. CFLR-CHR-5167NB or equivalent, Model of make specified in Appendix B as approved.

Supply and fixed in repairs 15 mm bore Wall Mixer with Provision For Overhead Shower with 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges etc as per manufacturer complete all as specified and as directed. Make-Jaquar Cat FUS-CHR-29273UPR or equivalent, Model of make specified in Appendix B as approved.

Supply and fixed in repairs 15 mm bore chromium plated brass kitchen sink mixer with pipe swinging spout wall mounted model with connecting legs & wall flanges including all accessories as per manufacturers complete all as specified and as directed.Make-Jaquar Cat. FUS-29165/ Kohler Cat No. K-373151N-4-C/Grohe Cat No. 31401DCO or equivalent, Model of make specified in Appendix B as approved.

Supply and fixed in repair fancy type long body CP bib cock 15mm bore with crutch or butterfly handle as approved complete all as specified and directed. Make- JaquarORP-CHR-10037PM/Kohler Cat No. K-11749IN-9-CP/Roca Cat Part No. RT5A7820CA1 or equivalent, Model of make specified in Appendix B as approved.

Supply and fixed in repair chromium plated fancy type two way bib cock 15mm bore with crutch handle as approved complete all as specified and directed. Make-Jaquar CON-047KN/Kohler Cat No. K-37320IN-4-CP/Roca Cat Part No. RT5A9320CA1 or equivalent, Model of make specified in Appendix B as approved.

S&F in repairs chromium plated overhead shower of size 150mm x 150mm Square Stainless Steel Silver Wall Mount with all accessories as per manufacturers instruction complete all as specified and as directed. Make - Jaquar OHS-CHR-35495GA/Kohler Cat No.22645IN or equivalent, Model of make specified in Appendix B as approved.

S&F in repair Toilet paper holder with chromium plated screws complete all as specified and as directed. Make : Jaquar Code ACN-1153S, Kohler Cat No. K-56331N-CP/Roca Cat No. RA816384001 or equivalent as approved.

S&F in repair CP single towel rail 600 mm long with chromium plated screws complete all as specified and as directed. Make : Jaquar-AKP-35711PS, Kohler Cat No.K-250651N-CP/Roca Cat No. RA816070165 or equivalent as approved.

S&F in repair Soap dish with chromium plated screws complete all as specified and as directed. Make :Jaquar Code AQN-7731, Kohler Cat No. K-56341N-CP and Roca Cat No. RA816070132 or equivalent as approved.

S & F in repair for chromium plated hand shower (Health faucet) with 15 mm dia, 1.2 meter long flexible tube & wall hook with N.R.V (Back Flow Preventer) complete all as specified and as directed. Make : Jaquar CAT Part No. ALD-577/Kohler Cat No. K-129271N-CP/Roca Cat No. RF9060A1 or equivalent as approved.

S & F in repair Corner glass shelf (with bracket). Make : Jaquar, CAT Part No ACN-1173 or equivalent, Model in Kohler/Cera/Roca as approved

S & F in repair CP towel ring round with chromium plated screws complete all as specified.. Make : Jaquar, CAT Part No AQN-7721, Kohler Cat No. K-5631IN-CP /Roca Cat No. RA816070172 or equivalent as approved.

S&F in repairs white rimless single piece-EWC with UF soft close slim seat cover, Hinges, including S trap and fixing all accessories as per manufacturers complete all as specified and as directed. Make : Jaquar, CAT Part No OPS-WHT-15853S300UF/Roca Cat Part No. RS34273700H/Kholer Cat part No. K-77739T-SL-0 or equivalent as approved.

S&F in repairs counter top oval wash hand basin vitreous china white (flat back) of size 545 X 545 X 180 mm including all fittings complete all as specified and as directed. Make : Jaquar Cat No. CNS-WHT-905, Kohler Cat No. K-4126K-00/Roca Cat part No. RS327875001 or equivalent as approved.

S&F in repairs CP grating 100 mm dia round with or without waste hole fixed on floor/nahani trap with white or coloured cement complete all as specified and as directed.

S&F in repair Butterfly Stainless Steel Toilet Jet or Hands-Free Spray including 1 metre Heavy PVC Hose complete all as specified and as directed.

S&F in repair 32 mm dia PVC waste pipe flexible type for WHB/Sink 100cm long with union complete all as specified and as directed.

S&F in repair 20 mm dia stainless steel powder coated curtain rod complete all as specified and as directed.

S&F in repair stainless steel bracket holder for curtain rods 20 mm dia fixed with screws and rawl plugs complete all as specified and as directed.

S&F in repair stainless steel decorative knob or side bulb holder for 20 mm dia curtain rod complete all as specified and as directed.

M & L for taking down steel shutter of any description, area n exc 1 Sqm each for repairing the steel windows in any position (building upto three storey) by replacing the projecting type or any type hinges (Single pane) including welding the new box type or pintle hinge and refixing the shutter including making good the surfaces with the existing shutter after applying two coats of synthetic enamel paint over red oxide primer over new hinges or repair work complete all as specified and as directed .

S&F in repair handles and peg stay of steel window etc including welding if required complete all as specified and as directed.

S&F 18 mm thick (one side decorative lamination and other side balancing lamination ) solid PVC board with cement solvent adhesive for shutters, kitchen cabinet/ cup board /partition wall/ wall cabinet incuding lipping to exposed surfaces with PVC strip as per manufacturer complete all as specified and directed.

S&F in repair stainless steel soft close auto hinge bright finish (Auto close concealed hinges) suitable for 18 to 20 mm thick shutter in any position complete all as specified.

S&F in repair 125 mm oval shape SS handle fancy type bright finish or as approved complete all as specified and as directed.

S&F in repair stainless steel plain wire basket of approved quality of size 520 X 485 X 100 mm complete all as specified and as directed. Make : Godrej/ Hindware/ Life time or equivalent as approved.

S&F in repair stainless steel thali basket of approved quality of size 520 X 485 X 100 mm complete all as specified and as directed. Make : Godrej/ Hindware/ Life time or equivalent as approved.

S&F in repair stainless steel cup & saucer basket of approved quality of size 520 X 485 X 100 mm complete all as specified and as directed. Make : Godrej/ Hindware/ Life time or equivalent as approved.

S&F in repair stainless steel perforated cutlery basket of approved quality of size 520 X 485 X 100 mm complete all as specified and as directed. Make : Godrej/ Hindware/ Life time or equivalent as approved.

S&F in repair basket/trolly soft close telescopic channel 50 cm long and 50mm width extruded MS galvanised with roller having ball bearing including drilling over stone/ply and PVC board etc complete all as specified and as directed.

Taking down existing aluminium door single leaf exc 1.5 but n.exc 4.0 Sqm for repairing including taking down all members with glass of any thickness, cleat, neosprene rubber beading and resecuring all section & tightening all joints including fixing new small cleats of suitable size, fixing L type cleats of SS to secure joints of stiles and rails wherever necessary and refixing all members, sheet glass, aluminium cleat but new neosprene rubber beading (paid under spearate item) and making the door shutter serviceable, including fixing on hinges complete all as specified and as directed.

Taking down existing aluminium window single leaf n exc 1.5 Sqm for repairing including taking down all members, with glass of any thickness, cleat, neosprene rubber beading and resecuring all sections & tightening all joints including fixing new small cleats of suitable size, fixing L type cleats of SS to secure joints of stiles and rails wherever necessary and refixing all members, sheet glass, aluminium cleat but new neosprene rubber beading (paid under separate item) and making the window shutter serviceable, including fixing on hinges complete all as specified and as directed.

S & F in repair stainless steel kitchen plate rack of overall minimum size 900 x 750 x 225 mm with partitions for small/ large plates etc made out of stainless steel 24 gauge, fixed with rawl plugs and chromium plated steel screws complete all as specified and as directed.

Supply and Fix neosprene rubber beading to existing aluminium door and window shutter complete all as specified and as directed.

M & L for machine grinding on existing terrazo flooring with grinding stone as required complete all as specified and directed.

M&L for cutting holes by core cutting machine over brick/stone masonry wall having thickness of 250 mm to 450mm and dia 50 to 75mm including making good with existing surface with CM 1:6 and cleaning of debris outside MD land complete all as specified and as directed.

S & F steel water tubes, 15mm dia bore medium grade galvanized, with all fitting and fixed to walls and ceiling or laid in floors including taking down old steel tubing and connections complete all as specified and as directed.

S & F steel water tubes, 20mm dia bore medium grade galvanized, with all fitting and fixed to walls and ceiling or laid in floors including taking down old steel tubing and connections complete all as specified and as directed.

Taking up or down 15mm dia bore steel tubing and connections and refixing old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.) complete all as specified and as directed.

Taking up or down 20mm dia bore steel tubing and connections and refixing old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.) completed all as specified and as directed.

S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S & F in repairs PVC valve less syphonic action type flushing cistern 10 litre capacity low level with all internal fittings including flush pipe with bend , 450mm long PVC connection and connected to WC complete all as specified and directed.

S&F in repair brass chromium plated Tubular towel rail 20mm dia, 600mm long including brackets complete all as specified and as directed.

S&F in repairs Stainless steel sink, 1.00mm thick for kitchen with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union,coupling etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repairs sink with drainage board made of stainless steel 1mm thick sheet for kitchen with plug washers and waste coupling and pipe including bedding in cement mortar on to dwarf walls or cantilever brackets and connecting union to pipe overall size 915x460mm with bowl size 410x330x160 mm complete all as specified and as directed.

M&L in repair for 100mm dia Cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

M & L 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cemet complete all as specified and as directed.

S&F Rotational moulded polyethylene 500 liters water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with 20 mm ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including dismantling old unserviceable water tanks complete all as specified and as directed.

S&F Rotational moulded polyethylene 1000 liters water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with 20 mm ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including dismantling old unserviceable water tanks complete all as specified and as directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 110 mm bore of pipe etc including taking down of existing pipe complete all as specified and as directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 75 mm bore of pipe etc including taking down of existing pipe complete all as specified and directed.

S&F in repair PVC (SWR) bend of 110 mm bore provided with access door complete all as specified and as directed.

S&F in repair PVC (SWR) bend of 75mm bore provided with access door complete all as specified and as directed.

S&F PVC ( SWR ) single junction (single ' T ' ) of 110 mm bore equal or unequal provided with access door complete all as specified and as directed.

M&L for PVC connection 450 mm long heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repairs complete all as specified and as directed.

S&F in repairs white vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including 100 mm bore 'P' or 'S' trap, 32 mm bore PVC connection pipe to flushing cistern and down pipe complete all as specified and as directed.

S&F in repair white vitreous china wash down water closet pan (pedestal pattern) with PVC seat cover with mild steel chromium plated or aluminised hinging device including 100mm bore 'P' or 'S' trap 32 mm bore PVC connection pipe to flushing cistern and down pipe complete all as specified and as directed.

S&F in repair plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

Demolition of cement concrete un reinforced in ground floor and paving n exc 15 cm thick (below or above ground level) complete all as specified and as directed.

M&L for Cement concrete type D2 (1:4:8) using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed.

S&F in repair wash hand basin, flat back 550 x 400 mm vitreous china (white) including PTMT waste coupling of 32 mm bore size, PVC waste pipe of 32 mm bore, PVC connector 450 mm long with angle iron/cast iron brackets of required size and making good to disturbed sufaces with existing surface complete all as specified and as directed.

S&F in repair 32 mm bore Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L Glazed ceramic tiles in vertical surfaces of size 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick backing coat in CM 1:4 complete all as specified and as directed.

M&L Non skid ceramic joint free coloured tiles 7-8 mm thick (square or rectangular)area of each tile exc 0.06 sqm but not exc 0.11 sqm in floors etc.. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Non skid ceramic joint free coloured tiles 7-8 mm thick (square or rectangular)area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc.. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and as directed.

M&L for vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in vertical surface such as dado / skirting / risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 10 mm thick rendering in cement mortor 1:4 complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness, laid dry or laid dry and pointed in any mortor in floor, apron etc complete all as specified and as directed

M&L for Granite 25 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar(1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

Taking down existing chowkats or frames , without taking off shutters ,from the frame , n exc 1.5 sqm each complete all as specified and as directed.

Taking down door chowkhat or frame exe 1.5 sqm but n exc 4 sqm each (without taking off shutter from the frames) complete all as specified and as directed.

Taking down shutters of any description exc 1.00 sqm area and not exc 2.00 Sqm each complete all as specified and as directed.

S&F 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type and both face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.

S& F Factory made 35mm thick 2nd class HW Plain framed, panelled shutter (two panels) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stiles as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S& F Factory made, 35mm thick, 2nd class hard wood (Hollock), glazed and skelton shutters, but divided into squares, with plain, chamfered or rounded,mitred and rebated sash bars,(door consist 4 to 6 panels) prepared to receive glass/ gauge etc edges of framing plain , chamfered or rounded fitted with cut and mitered beads for securing glass etc size member of shutters as specified in MES SSR Pt I ,section 8, clause 8.24 (a) complete all as specified.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelam PVC sheet and edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed. Note :- Item included with MS flat of Size 25 X 3mm, 200 MM long will be provided as holdfast in the chowkat including cutting and pinning in for holdfast in brick or concrete surfaces)

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded Single Side Prelam PVC sheet and stile & rails having one side feathered edge and on other side 10mm 90 degree bent edge for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam PVC colour sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete al as specified and as directed.

Dittio S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded complete all as specified and as directed.

All as per ser item No 111 above but without glazing bar complete all as specified and as directed.

S&F powder coated (minium thickness 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

M&L powder coated (minium thickness 50 micron) aluminium window and ventilator shutters, fixed/side hung or sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws complete all as specified & as directed. Note: Rate shall be inclusive of 4.8 mm thick plain or tinted glass sheet for glazing etc.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; making bracket with angles railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including necessary welding complete all as specified and as directed.

M&L for preparation of new steel surfaces over 10 cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new wooden surfaces over 10 cm width or girth of any description and applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and as directed.

S&F aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 300 mm length of bolt complete all as specified and directed.

S & F extruded aluminium anodised alloy handles, fabricated type, size of handle 150 mm complete all as specified and as directed.

S&F aluminium ,anodized 200mm long barrel tower bolts of extruded section complete all as specified and as directed.

S&F aluminium ,anodized 150mm long barrel tower bolts of extruded section complete all as specified and as directed.

S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 with SS screw of good quality complete all as specified and directed

S & F 100 mm size butt hinges of medium weight cold rolled mild steel complete all as specified and as directed.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate inclunding fixing to existing steel frame with welding or wooden frame complete all as specified and directed

M&L for Running welding in repairs for the metal to be welded in thickness exc 20 mm but n exc 25mm complete all as specified and as directed

S&F Wire cloth galvanised mild steel, 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified.

Ditto All as per ser Item No 127 above but in repairs complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares n.exc 0.50 Sqm in each pane complete all as specified and as directed.

S&F 3mm thick, frosted sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares n.exc 0.50 Sqm in each pane complete all as specified and as directed.

S&F 4.80 mm thick, plain or tinted sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares n.exc 0.50 Sqm in each pane complete all as specified and as directed.

M&L in repair for II nd class HW wrought Plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads of area not exc 3 Sq cm complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc including dismantling asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410-W (Gde?E- 250) quality A?complete all as specified and as directed.

M&L for Expanded metal, N exc 4 kg per sqm cut to length,bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, over all length of cover plate 150 mm complete all as specified and as directed.

S&F door closer hydraulically regulated designation No 3, universal type, suitable for door shutter of weight between 61 to 80 Kg of aluminium (Die cast) body complete all as specified and as directed.

Taking down shutter of any description exc 1 sq. m and n exc 2 sq. m each and refixing in the same opening after easing and adusting complete all as specified and as directed.

M&L cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves,lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good in brick walls, cutting not exceeding 10 cm girth complete all as specified and as directed.

Cutting holes in brick walls exc half brick but not exc one brick built in cement mortor or cement lime mortor and stone walls built in lime mortor for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and as directed.

Taking down carefully surface aluminium or copper point wiring with PVC casing or conduit (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, regulators, sockets, light fittings etc and making good disturbed surfaces of walls, floors, etc all as directed. Note- seviceable tube light fitting will be reused as refixing under respective item of the schedule

Taking down and dismantaling Ceiling fan including accessories of any type or make,safely and refixing after oiling, greasing and servicing in serviceable condition duly painted with synthetic enamel paint of in white/off white colour complete all as specified and directed including writing MES nos.

Taking down and dismantaling exhaust fan including connected accessories of any type or make,safely and refixing after oiling, greasing and servicing in serviceable condition duly painted with synthetic enamel paint of in greyish/smoky greyish colour complete all as specified and directed including writing MES nos.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity copper conductor 1.5 sqmm (Green), concealed in wall, drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in modular metal flush boxes for mounting switches, sockets, fan regulator as required for one light point controlled by one switch.

Ditto All as per item No. 146.00 here-in-before but one fan point controlled by one switch

Ditto All as per item No. 146.00 here-in-before but one Exh fan point controlled by one switch

Ditto All as per item No. 146.00 here-in-before but One socket outlet 6 amp controlled by one switch on indepdendent board.

Ditto All as per item No. 146.00 here-in-before but One bell point controlled by on bell push button.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 sqmm (Phase - Red, Neutral - Black) and earth continuity copper conductor 4.0 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in modular metal flush boxes with modular white cover plate with frame for one socket point 16 Amps controlled by one switch on indepdendent board.

M&L for provn point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth copper continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in modular sunken boxes for mounting switxhes, sockets, as required One socket outlet 6 amp controlled by one switch on the same board with other switches. Note for Item No 146.00 to 152.00 :- (a) The cost of Modular Metal flush box & modular cover plate colour and size as required at site and cutting chases in stone masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate and the make of modular plate shall be of the same brand as per Switch/Socket accessories (b) Modular switch/socket accessories shall be measured & paid separately in respective item

S&F angle holder 6A, 240V insulated polycarbonate body with back plate complete.

S&F switch modular 1 way 6 Amps, 230 volts, 1 module.

S&F modular socket 6 Amps, 2/3pin combined 2 module AC 230 volts.

S&F modular switch 1 way 16/20 Amps, 230 volts, 1 module.

S&F modular socket 6/16 Amps, 2/3pin combined 2 module AC 230 volts.

S&F modular fan regulator 120 watts, 2-module AC 230 Volts.

S&F Modular bell push 6A 1 module

S&F musical bell, AC, 230 volts, single pole.

S&F ceiling rose 3 pin (phase,neutral and earth) polycarbonate body complete.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLS multistranded copper cable of size 2 x 6 sqmm drawing into and including rigid non metallic PVC conduit concealed in wall, medium grade not less than 20mm dia ISI marked ivory colour with all conduit fitting and fixing accessories and 6 sqmm FRLS multistranded copper conductor cable as continuous earth wire complete all as specified and directed (Note1 :- 2 runs of 6 sqmm copper wire and 1 run of 6 sqmm copper earth wire alongwith PVC conduit shall be measured as 1 unit. Note2- Rate of Cutting chasing of exixting wall and making good of disturbed surface for concealed conduit shall be included in this item

S&F 20 amp, single pole and neutral socket outlet with 2 pole and earth, metal enclosed plug top in power coated CRCA steel sheet enclosure recess mounted with chained metal cover for socket outlet with and including one number single pole 'C' series MCB 20 amp as required.

S&F sheet Metal enclosure of SPN 8 Way DB double door having busbar capacity of 200 Amp complete all as specified and directed.

S&F MCBs of 'B' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of Single pole 6 to 32 amp.

S&F MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of Double pole 10 to 32 amp.

S&F LED Fixtures 20 Watt with extruded polycarbonate, environmental friendly, slim design with decorative and caps, high performance diffuser for soft & glare free light, minimum lumen output 1900 lm with efficacy 110 lm/w. Driver with high voltage protection upto 380 VAC & surge protection upto 2.5 KV, CCT(K)-6500, LM 80 tested high brightness LED technology. Make cat Part No:- Wipro Cat No. D532065, Havells Cat part No:- LHEXAWP71N1W020 or equivalent model of make specified in Appendix B as approved.

S&F in repair LED (0.6M) smartbrite extra batten made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 1000 lumens at a minimum system efficiency of 100 lumen/w and total power consumption not more than 10 watt including driver.

Refixing only serviceable tube light fitting as obtained from item No 143 complete with all acessories internally pre-wired and and including connection up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed.

J.J.ENGINEERING (BID ID -3131570)

Chaudhary Constructions (BID ID -3130816)

JAGDAMBA CONSTRUCTION COMPANY (BID ID -3120831)