Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.8 LAccepted-AOC 10 324 17 BALAJI NAGAR ARUVANKADU COONOOR THE NILGIRIS TAMIL NADU 643202 | COONOOR | THE NILGIRIS | TAMIL NADU | 643202 | ₹24.8 L Quoted ₹25.1 L | L1 | Accepted-AOC Being L1 Bidder |
| 2 | L2₹25.8 LRejected-Finance 109 D ALLAI SALT COMPOUND OLD LAKSHMI THEATRE KRISHNAPURAM COONOOR 643102 THE NILGIRIS | COONOOR | THE NILGIRIS | TAMIL NADU | 643102 | ₹25.8 L | L2 | Rejected-Finance Being Not L1 Bidder |
| 3 | L3₹26.0 LRejected-Finance C 101 ADG P CHENNAI | ₹26.0 L | L3 | Rejected-Finance Being Not L1 Bidder |
| 4 | L4₹26.3 LRejected-Finance ASHOKA PARK PALLAVA PARK BVT INS VISHWAKARMA INDIAN NAVY OF GE ND VISAKHAPATNAM | ₹26.3 L | L4 | Rejected-Finance Being Not L1 Bidder |
| 5 | L5₹27.3 LRejected-Finance | ₹27.3 L | L5 | Rejected-Finance Being Not L1 Bidder |
| Sl No | Description | Qty | Unit | M SUNDARARAJAN L1 | GUNASEKARAN AND CO L6 | K.AYYAPPAN L2 | ACE PROMOTERS L3 | VVM CONSTRUCTIONS L7 | SRINIVASAN&CO L5 | CRD TRADERS L8 | SREE CONSTRUCTIONS L4 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | S & F in repairs / patch work rexine cloth not less than 1.70 mm thick (48" wide) with RM material cost not less than Rs. 250/- and colour matching with existing and pasting with approved adhesive and stitching as required in existing tip up chairs all as approved and directed. | 40 | Sqm | 200 ₹8,000 | 560 ₹22,400 | 500 ₹20,000 | 520 ₹20,800 | 544 ₹21,760 | 610 ₹24,400 | 600 ₹24,000 | 550 ₹22,000 |
| 2.00 | S&F in repairs 12 mm dia anchor fastener of length 50 mm and making hole as per size of bolt in legs of tip up chairs for fixing rigidly and making good flooring all as specified and directed. | 60 | Each | 80 ₹4,800 | 80 ₹4,800 | 65 ₹3,900 | 64 ₹3,840 | 72 ₹4,320 | 72 ₹4,320 | 90 ₹5,400 | 65 ₹3,900 |
| 3.00 | M&L for Servicing of chairs such as loose of nut, bolt,screws including missing nut,bolt to be fitted as required and making serviceable all as specified and directed. | 400 | Each | 30 ₹12,000 | 35 ₹14,000 | 25 ₹10,000 | 50 ₹20,000 | 42 ₹16,800 | 31 ₹12,400 | 50 ₹20,000 | 30 ₹12,000 |
| 4.00 | Removing the existing old disturbed tip up chairs seat/back and taking out the damaged inside material like foam ,plywood etc including removed and fixing of rexine and refixing the same in position all as specified and directed. | 40 | Each | 100 ₹4,000 | 165 ₹6,600 | 135 ₹5,400 | 155 ₹6,200 | 165 ₹6,600 | 165 ₹6,600 | 160 ₹6,400 | 140 ₹5,600 |
| 5.00 | Removing the existing old disturbed tip up chairs and taking out the damaged wooden runners and grouting with CONBEXTARA GP 2 or equivalent as approved by GE general purpose for free flow high strength non shrink cementeous grouting material all as per manufactures instruction including embedding 8 mm dia fastener purpose made anchor bolts and refixing the chairs in position all as specified and directed. | 40 | Each | 100 ₹4,000 | 150 ₹6,000 | 135 ₹5,400 | 145 ₹5,800 | 155 ₹6,200 | 188 ₹7,520 | 160 ₹6,400 | 150 ₹6,000 |
| 6.00 | S&F in repairs seat for tip up chairs with of density 40 g/sqcm as specified and as per sample existing size all as approved by Engr in charge. | 25 | Each | 400 ₹10,000 | 930 ₹23,250 | 800 ₹20,000 | 900 ₹22,500 | 920 ₹23,000 | 875 ₹21,875 | 950 ₹23,750 | 828 ₹20,700 |
| 7.00 | S&F in repairs back for tip up chairs of density 32 g/sqcm as specified and as per sample existing size all as approved by Engr in charge. | 25 | Each | 400 ₹10,000 | 850 ₹21,250 | 750 ₹18,750 | 900 ₹22,500 | 850 ₹21,250 | 810 ₹20,250 | 850 ₹21,250 | 775 ₹19,375 |
| 8.00 | Supply and fix SR 02 Tip up Back push (21 Inch) HSN/ SAC Code : 9403 chairs fixed to floor with suitable adhesive and expansion bolt etc., (anchor fasteners shall be not less than 10mm dia and length 120mm) etc complete all as specified and as directed.
Make: Cat No SR02 of SR SEATING or equivalent to Godrej interio | 1 | Each | 9,500 ₹9,500 | 11,000 ₹11,000 | 9,990 ₹9,990 | 10,000 ₹10,000 | 10,250 ₹10,250 | 9,875 ₹9,875 | 11,000 ₹11,000 | 10,500 ₹10,500 |
| 9.00 | Supply and fix SR 07 Slider pushback (22 Inch) HSN/ SAC Code : 9403 chairs fixed to floor with suitable adhesive and expansion bolt etc., (anchor fasteners shall be not less than 10mm dia and length 120mm) etc complete all as specified and as directed.
Make: Cat No SR02 of SR SEATING or equivalent to Godrej interio | 1 | Each | 16,000 ₹16,000 | 18,500 ₹18,500 | 16,450 ₹16,450 | 16,700 ₹16,700 | 17,500 ₹17,500 | 17,420 ₹17,420 | 18,000 ₹18,000 | 16,600 ₹16,600 |
| 10.00 | S&F in repairs Tip up heavy duty chair fixed to floor with suitable adhesive and expansion bolt etc., all as specified and directed.(anchor fasteners shall be not less than 10 mm dia and length 120 mm.) | 5 | Each | 5,000 ₹25,000 | 5,400 ₹27,000 | 5,500 ₹27,500 | 4,600 ₹23,000 | 5,285 ₹26,425 | 5,100 ₹25,500 | 5,200 ₹26,000 | 4,900 ₹24,500 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
11 Mar 2026, 6:00 pmClosed
Shri Pawan Kumar Goswami, EE, GE DSSC
BARRACKS-POST, WELLINGTON, THE NILGIRIS, TAMIL NADU, PIN-643231
REPAIRS TO TIP UP CHAIRS, WOODEN FLOORING, WALL PANELLING, SAND MODEL PITS, FALSE CEILLING AND MISC WORKS ETC AT DSSC WELLINGTON
2026_MES_753155_1
8600/E8
Open Tender
Civil Works
270 days
WELLINGTON
PLEASE REFER TENDER DOCUMENTS AND NIT
8 documents required · 8 mandatory
₹500
GE DSSC WELLINGTON
₹50,000
Yes
13 Apr 2026
18 Feb 2026
14 Mar 2026
18 Feb 2026
11 Mar 2026
4 Mar 2026
S & F in repairs / patch work rexine cloth not less than 1.70 mm thick (48" wide) with RM material cost not less than Rs. 250/- and colour matching with existing and pasting with approved adhesive and stitching as required in existing tip up chairs all as approved and directed.
S&F in repairs 12 mm dia anchor fastener of length 50 mm and making hole as per size of bolt in legs of tip up chairs for fixing rigidly and making good flooring all as specified and directed.
M&L for Servicing of chairs such as loose of nut, bolt,screws including missing nut,bolt to be fitted as required and making serviceable all as specified and directed.
Removing the existing old disturbed tip up chairs seat/back and taking out the damaged inside material like foam ,plywood etc including removed and fixing of rexine and refixing the same in position all as specified and directed.
Removing the existing old disturbed tip up chairs and taking out the damaged wooden runners and grouting with CONBEXTARA GP 2 or equivalent as approved by GE general purpose for free flow high strength non shrink cementeous grouting material all as per manufactures instruction including embedding 8 mm dia fastener purpose made anchor bolts and refixing the chairs in position all as specified and directed.
S&F in repairs seat for tip up chairs with of density 40 g/sqcm as specified and as per sample existing size all as approved by Engr in charge.
S&F in repairs back for tip up chairs of density 32 g/sqcm as specified and as per sample existing size all as approved by Engr in charge.
Supply and fix SR 02 Tip up Back push (21 Inch) HSN/ SAC Code : 9403 chairs fixed to floor with suitable adhesive and expansion bolt etc., (anchor fasteners shall be not less than 10mm dia and length 120mm) etc complete all as specified and as directed. Make: Cat No SR02 of SR SEATING or equivalent to Godrej interio
Supply and fix SR 07 Slider pushback (22 Inch) HSN/ SAC Code : 9403 chairs fixed to floor with suitable adhesive and expansion bolt etc., (anchor fasteners shall be not less than 10mm dia and length 120mm) etc complete all as specified and as directed. Make: Cat No SR02 of SR SEATING or equivalent to Godrej interio
S&F in repairs Tip up heavy duty chair fixed to floor with suitable adhesive and expansion bolt etc., all as specified and directed.(anchor fasteners shall be not less than 10 mm dia and length 120 mm.)
M&L for one coat of synthetic enamel painting including preparation of surfaces on steel surfaces of tip up chairs( for leg portion and hand rails) all as specified and directed.
M&L for one coat of Touch wood polish on old wooden surfaces including necessary preparation of surfaces including filling of holes / dents with filler material and applying one coat of filled area with touch wood polish all as specified and directed.
M & L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface of old treated wood including filling of holes / dents with filler material and applying one coat of filled area and atouch with french polish with one or more coats all as specified and directed.
M&L french polishing on surfaces of any description,width or girth cleaning and preparing the surface including necessary repair with wood filler over a coat of sealer where requred on old / new work with two coat all as specified and directed.
M&L for Linoleum plain coloured floors of 2 mm thick (matching with existing ) sealed down with an approved adhesive incl removing of extg flooring all as specified and directed.
M&L for carpet flooring 6-7 mm thick,3-4 mm pile thickness,total weight 1800 g/sqmt sealed down with an approved adhesive incl removing of extg carpet flooring all as specified and directed.
M&L in repairs for 1213x193mmx8mm thick / or any size laminate wooden flooring having abrasion class AC4/ class 32 with interlocking system and corner and edges profiles over 1mm thick plastic sheet and 2mm thick form complete laid all as per manufacutures instructions and as directed by Engineer-in-charge
M&L in repairs 8 mm thick pre engineered hard wood wall panelling with planks fixed with screws to timber frame work including 8mm thick plywood all as specified and as directed
M&L in repair for hardwood (solid wood) flooring of any species / colour of size 1200X150mmX18mm thick prefinished with aluminium oxide with UV cured coating , tongue and grove on all four side locking and maximum 1mm micro bevel "V" grove along all joints over 8mm thick plywood BWR type BB5 ply fixed with neumatic nails over 2mm thick polyurithine foam including batterns all as specified and directed Make of hardwood- florz/NOVAR/EGO/TRYSQUARE or equivalent as approved by GE
Taking down Chowkats or frames not exceeding 1.5 Sq.M each (Without taking off shutters from the frames). complete all as specified and directed
Taking down Chowkats or frames exc 1.5 Sqm but not exceeding 4 Sq.M each (Without taking off shutters from the frames) complete all as specified and directed
S&F in repairs Second Class hard wood (Sal) plain, solid, straight as in chowkat and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed .
S&F in repairs for 30 mm thick Second class hard wood plain , framed ,Panelled Shutters ( any number of panels), with panels of timber flat on both sides(feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (a)complete all as specified and directed .
S&F in repairs 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (b)complete all as specified and directed
S&F in repairs solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplaying and fixing in opening as per specification and drawing but wood grain printed PVC sheet used instead of Plain colour PVC sheet & & edges will be painted to match with printed sheet.
S&F in repairs factory made solid PVC Moulded door shutter with particle board Core , 28 to 30 mm thick (stiles) with 2,4 or 6 raised panel design with 2 mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2 mm Plain colour PVC Sheet on back face Supplying & fixing in the frame at site as specification & Drawing .
S&F in repairs for 300 mm Brass, sliding door bolt with sand or die cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed all as specified and as directed.
S&F in repairs for 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and as directed.
S& F in repairs 200 mm Aluminium anodised, barrel tower bolts of extruded section and fixed
S& F in repairs 200 mm Brass barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed
S& F in repairs 150 mm Extruded aluminium alloy handles, fabricated type, anodised and fixed
S& F in repairs 150 mm Extruded brass handles, fabricated type, polished and fixed
S&F in repairs 100 mm long medium weight, cold rolled mild steel Butt hinges ISI marked complete all as specified and directed
S&F in repairs 100 mm long butt hinges cast brass with mild steel hinge pin bright polished and fixed, type B-11complete all as specified and directed
S & F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confirming to Fe 290 Gde-E-165 complete all as specified and directed
S & F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed
M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.
Taking down Aluminium door/ partition incl glass / partical board all as specified and directed
S & F in repairs Anodised aluminium frame for door/ windows/ partition etc. with one or more rebates using suitable size standard aluminium sections including jointing cleat, glazing clips, rubber neopreone packing including necessary accessories like handles, hinges etc complete all as specified and directed .
S&F powder coated coloured aluminum sections as in door/windows/ partitions etc. with one or more rebates using suitable size of standard aluminium sections including door stopper, including necessary joining cleats, glazing clips, rubber neoprene packing, aluminum snap beading screws complete all as specified and directed.
M&L in repairs for 12 mm thick prelaminated particle board , interior graded, preliminated one side with decorative choice lamination and other side balancing white laminations, aluminium/ tibmer frame and wall surface all as specified and directed.
M&L fixed in Repairs for 12 mm thick prelaminated both side , interior graded, preliminated both side decorative choice lamination fixed to aluminium/ tibmer frame and wall surface all as specified and directed.
M&L in repairs for 09 mm thick prelaminated particle board , interior graded, preliminated one side with decorative choice lamination and other side balancing white laminations, fixed to aluminium/ tibmer frame wall surface all as specified and directed.
M&L in repairs for 09 mm thick prelaminated particle board , interior graded, preliminated both side with decorative choice lamination fixed to aluminium/ tibmer frame wall surface all as specified and directed.
S&F in repairs for 1.5 mm thick decorative laminates type I,or surface finish,colour and pattern making good with accessories as approved by Engr-In-Charge
M&L in repairs for 12 mm Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face (One Side Teak) fixed with screws to timber frame as directed.
M&L in repairs for Plain fillets 2nd class hardwood exc 13 sqcm but n.exc 25 sqcm. square, rectangular or triangular in section, clean sawn, secured with nails plugging to wall.
M & L for two coats of Varnishing on old surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler over a coat of sealer on new works w all as specified and directed.
Taking down UPVC Door/ window and partion all as specified and as directed.
M&L in repairs for White /coloured UPVC ventilators complete all as per manufacturer's direction and following specifications all as directed:- 1.Material & Labour for UPVC ventilator frame shall be fixed made of PVC material confirming to IS 10151 the frame shall be made of extruded UPVC section having over all dimension of 60x58 & 72x60mm having wall thickness 2mm + 0.2mm. 2. Corners of wall frame shall be shall be jointed by MS galvanized brackets mitred and plastic welded the hinge side vertical outer frame shall be reinforced with galvanized MS tube of wall thickness 1 mm + 0.1 mm and the tie rod shall be provide at the bottom of the frame. 3. The profiles should be three chamber system which shall provide high insulation properties , 4.All the hardwares like friction stays, handles should be screwed with self tapping screws, 5.Glazing system should be glazed with 5mm thick plain glass/louvers fixed in ventilator frame and all as per manufacturer's instructions and as directed. Make: Madhu Industries / AMD overseas Ltd/ Gadli Industries/ Simta Astrix.
Material and labour for Factory made UPVC white colour sliding Windows with glazing all as per manufacturer's direction and following specifications :- (i) The profile for constr of UPVC window frame shall be uPVC material conforming to 10151 . (ii) The frame shall be made of extruded uPVC section having overall diamension of 65mmx 50mm having wall thikness 2mm ± 0.2mm. (iii) The corners of wall frame shall be joint by MS galavanised brackets ,joints,mittred and plastyic weleded. (iv) The hinge side vertical outer frame shall be reinforced with galvanised MS tube of wall thicknesss 1mm ± 0.1mm and the tie rod shall be provided at the bottom of thge frame. (v) The profiles should be sigle chamber system which shall provide high insulation properties. (vi) The window system should be glazed with 6mm thick plain glass fixed in window frame as per manufactures instruction. Make : Madhu Industries / Fenesta / Qute /Sarvesh Multi Plast India Ltd/ SMP Impex /H20 Solution or equivalent. . Note: The entire fixing shall be done with as per manufactures instruction and specification and as directed by the Engr in Charge.
M&L in repairs for White/Coloured UPVC partition complete all as per manufacturer's instructions and following specifications all as directed:- 1.UPVC partition frame shall be made of material confirming to IS 10151 of extruded UPVC section having over all dimension of 65x55 having wall thickness 2mm + 0.2mm. 2. Corners of frame shall be jointed by MS galvanized brackets mitred and plastic welded. 3. The profiles should be single chamber system which shall provide high insulation properties , 4.Glazing shall be 6mm thick frosted glass fixed in frames with appropriate beading as per manufacture's specification. 5. The bottom portion of partition for 1 m height and above 2.1m hight will be provided with UPVC hollow board not less than 6 mm thick. Make : Madhu Industries / Fenesta / Qute /Sarvesh Multi Plast India Ltd/ SMP Impex /H20 Solution or equivalent.
M & L for repair of Aluminium door shutters, including taking down, re-setting easing, fixing of cleats, screws, nuts, bolts, door closers, hold fasts, Aluminium door stopper, change of PVC rubber beadings, repair for smooth functioning of door all as specified and directed.
M & L for repair of UPVC door shutters, including taking down, re-setting , screws, nuts, bolts, door closers, hold fasts, change of PVC rubber beadings, repair for smooth functioning of door all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal / Aluminium frames including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and directed .
S&F in repairs 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty / Aluminium rubber beading in squares exceeding 0.5 Sq.M in each pane complete all as specified and directed
S&F in repairs 4 mm thick sheet glass ordinary quality n exc 0.5 sq. m and glazing wooden fillets / rubber beading in squares as directed and specified.
S&F in repairs 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.M in each pane complete all as specified and directed
S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing ports made of brass , other parts made of mild steel heavy duty and finishing the disturbed surface to match with existing finish complete all as specified and directed.
S & F in repair Door closer hydraulically regulated, Aluminium die cast body designation No. 2, universal type, suitable for door shutters including all accessarios all as specified and as directed.
S & F in repair brass mortice lock vertical type size 100mm 4 levers all as specified and directed
S & F in repair UPVC door lock vertical type any size four lever with two key all as specified and directed
Supply and Fix in repairs galvanised steel wiremesh 1.4mm dia fixed with tinned tacks of wire staples size of mesh 12mm all as directed and specified.
Dismantling timber scantlings 40 sq. cm and over in section, in any position all as specified and directed.
Supply and fixing Second class clean sawn timber framed and fixed hard-wood in scantlings all as specified and directed
M & L for preparation of new surfaces of wood and wood based materials of any description not other wise described over 10 cm width or girth and applying Two coat of synthetic enamel paint over a pink primer coat complete all as specified and directed.
Dismantling wall and ceiling board (fibre,pulp,insulation etc.)or insulation board/slab/blanket any thickness including cover fillets all as specified and directed
M&L for plain fillets 2 nd class hard wood exc 6 sqcm but n.exc 25 sqcm, square, rectangular or triangular in section , clean sawn , secured with 8 m expansion fastners in stone wall @ 1.00 mtr interval (plugging to wall) complete all as specified and as directed.
M&L for pre-engineered hardwood for cornices/beading/nosing/moulding as used in pre-engineered wall panelling etc of cross sectional area n.exc 25 Sq cm as specified and directed.
M&L for 8 mm thick pre-Engineered laminated wood for wall panelling planks of any clour and design (as approved by GE) fixed over and including 8/9 mm thick ply wood fixed on wall or floor as per manufacturers instructions and as directed.
M&L removing from the position and refixing for 8 mm thick pre-Engineered laminated wood for wall panelling planks of any clour and design and fixed over and including 8/9 mm thick ply wood fixed on wall or floor complete as directed.
M&L in repairs for gypsum board false ceiling 12mm thick fixed with standard GI frame work with GI furring channels of 16 gauge, main "U" shaped channels @ 1220mm C/c and inter connected cross channels "C" shape spaced at 610mm c/c,the main furring channels shall be fixed through GI cannels suspenders from thero of @1200c/c, Main and inter connected channels shall be fixed through fasteners clips as per manufacturer's instructions, shall be applied with two coats of plastic emulsion paint over a coat of primer all as specified and directed.
M&L in repairs gypsum board false ceiling 12mm thick as in repairs incld accesserioes shall be applied with two coats of plastic emulsion paint over a coat of primer all as specified and directed.
M&L in repairs for wall panelling gypsum board 12mm thick as in repairs with including assesories and shall be applied with two coats of plastic emulsion paint over a coat of primer all as specified and directed.
S & F in repairs of plaster of paris decorative type cornices 120 to150 mm size of any shape and design to be fixed all around at the junction of wall and ceiling etc and shall be applied with two coats of plastic emulsion paint over a coat of primer all as specified and directed.
Supply& fixing of Armstrong Mineral Fibre Suspended Ceiling System with Classic Lite Tegular Edge Tiles of 12mm thick and Armstrong Prelude 24mm face exposed grid. The tiles shall have pin hole visual with Humidity Resistance (RH) of 99%, 0.55 as per ASTM C423 standard, CAC of 36db, Light Reflectance ≥87%, Thermal Conductivity k = 0.052 - 0.057 W/mK, Colour Global White, Fire Performance of Class 0/1 as per BS 476 Part 6/7 and Class A as per ASTM E84 with 16mm Tegular edge. The tile shall be laid on Armstrong Prelude 32 with 24 mm wide T - section flanges colour global white (matching to tile colour) having roll formed double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm. The grid system is to comprise main runner spaced at 1200mm securely fixed to the structural soffit using Armstrong suspension system (specifications above) at 1200mm maximum. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls using screws at 450mm centre to centre maximum.
M&L for only modular false ceiling board 9mm thick of calciumsilicate material of size 595mm x 595mm GRG ceiling tiles shall have weight 7 Kg /Sqm all as specified and directed. Note :- Rate for fixing the ceilling upto 10mtr height deemed to be included in quoated rate by the contractor. Make: Armstrong/ Diamond/ Saint Gobain.
S&F in repairs blinds of approved make Roller type,Zebra pattern using Polyester/PVC/ Vinyl of approved colour/ shade and pattern including operating arrangement such as chord/thread, counterweight, connecting chain etc and necessary fittings complete all as specified and directed.
S & F in repairs on toughned glass,door/partion 10mm thick including making holes in glass and all assesories for fixed in posn all as specified and directed.
S & F in repairs on toughned glass,door/partion 8mm thick including making holes in glass and all assesories for fixed in posn all as specified and directed.
S & F in repairsof 600mm long stainless steel handle quality of SS 304 Grade fixed to glass door for fixed in posn all as specified and directed.
S &F in repairs aluminium powder coated curtain rods brackets antique finish with doom suitable for single curtain rods of 25 mm fixed in position with approapriate screws all as dircted and specified
S & F in repairs 25mm dia aluminium coated designer curtain rods antique finish fixed to double bracket matching with curtain rods in fixed in position all as specified and directed.
M& L for cutting chases in stone walls , pinning in , making good to facing where required and pointing in cement mortar 1:3 to ends of edges of landing steps, cills, sunshed, shelves, lintels, etc ; and cutting chease for water tubing or concealed conduit wiring , etc, and making good cutting not exc 10 cm girth.
S & F in repairs looking mirror of any size using 6 mm thick mirror edges rounded fixed with SS clips all as specified including necessary frame work in Stainless tubes
Demolition of stone slabs and tiles of any description or thickness in floors,laid bedded and pointed in any mortar
Demolition of un-reinforced cement concrete in ground floors for levelling of and pavings not exceeding 15 cm thickness including floor finish complete all as specified and directed.
M&L for 25 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded aggregate) as in subbase of flooring complete all as specified and directed.
M&L for 40 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded aggregate) as in subbase of flooring complete all as specified and directed.
M & L Vitrified Ceramic tiles dark shade 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM (1:4) complete all as specified and directed.
M & L Vitrified Ceramic tiles dark shade 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in vertical surfaces like skirting, dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including rendering/ backing coat 10 mm thick in CM (1:4) complete all as specified and directed.
M & L Vitrified Ceramic tiles light shade 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM (1:4) complete all as specified and directed.
M & L Vitrified Ceramic tiles light shade 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in vertical surfaces like skirting, dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including rendering/ backing coat 10 mm thick in CM (1:4) complete all as specified and directed.
Material and labour for Granite stone slab flooring , window cills (polished/ leathered finish) 20mm thick machine cut, rounding edges, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, over 20mm thick screed bed bedding in cement mortar 1 :4 etc complete all as specified and as directed.
Material and labour for Granite stone slab any type, 20mm thick machine cut, as in skirting/ dado bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, over 15mm thick backing coat in cement mortar 1 :3 etc complete all as specified and as directed.
Rounding of edges of stone slab one edge, such as in steps, cooking platform, and other similar situation
M&L in repairs non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm screed bed 1:6 cement mortar complete all as specified and directed.
M&L non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm screed bed 1:6 cement mortar complete all as specified and directed.
M & L for Coloured Glazed ceramic colour tiles 450/300 x 7 mm / 600 x 300 x 7 mm thick set jointed in cement slurry & pointed in white cement or coloure cement to match overrendering as backing coat 10 mm thick in CM 1 :3 complete.as in dados/skirtings all as specified and directed.
Demolition of brick or stone/ boulder masonary, built in cement mortar complete all as specified
M&L Precast cement concrete type C1 1:3:6 (Using 20 mm graded aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:4 complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.
M&L for rendering 15 mm thick in cement mortor 1:4 using liquid water proofing compound on fair face of brick/concrete surfaces and finished even and smooth without using extra cement all as directed.
M&L for rendering 15 mm thick in cement mortor 1:6 using liquid water proofing compound on fair face of brick/concrete surfaces and finished even and smooth without using extra cement all as directed.
Supply only Liquid water proofing compound.
M&L preparation of new decorated surfaces and applying two coat of acrylic emulsion exterior grade on wall over a coat of primer complete all as specified
M&L preparation of new decorated surfaces and applying two coat of distemper oil emulsion over 1 mm thick of putty finish and a coat of alkaline resistant primer complete all as specified
M & L for applying one coat of distemper oil emulsion on old decorated surfaces of walls including preparation of surface by washing, rubbing down and stopping of distempered surfaces all as specified and directed.
M & L for applying two coat of distemper oil emulsion on old decorated surfaces of walls including preparation of surface by washing, rubbing down and stopping of distempered surfaces all as specified and directed.
M & L for complete removal of existing treatment from old plastered surfaces of celing and applying two coats of Asian paints Royale Shyne paint or Berger Silk illusion or eqivalent (coloured/white) over a coat of deco prime primer over and including 3 mm wall care putty with brush/roller, finished even and smooth complete all as per manufacturer's instruction and as directed by GE.
M&L Complete removal of existing treatment on wall and applying two coats of oil bound distemper over a coat of primer over 1 mm thick wall care putty on walls all as specified and directed .
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, includingNainital or similar pattern roof coverings complete all as specified and directed.
S & F in repairs 3mm thick, solid embossed pattern polycarbonate sheet, colour as approved by GE as in roof, fixing with self tapping screw and joints of polycarbonate sheet shall be sealed with silicon with and including aluminium strip/ties etc required for fixing all as per manufacturers instructions and directed by Engr-in-Charge.
S& F in repairs 100 mm PVC Body concealed type lock for aluminium sliding window fixed all as specified and as directed.
S& F in repairs 100 mm lock for UPVC window, white powder coated with striker and fixed all as specified and as directed.
Please Enable Macros to View BoQ information
stage.html
html • 0.06 MB
technical_843578.pdf
techsummary_843578.pdf
finance_843578.pdf
BOQ Comparative Chart
xlsx
finsummary_843578.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.41 MB
8600Tender.pdf
Tender Documents • 1.29 MB
BOQ_843578.xls
BOQ • 0.45 MB
Download all tender documents and submit your bid