Construction of additional accommodation of Jawans of Police component at Police Station Nowhattal Srinagar under Zero Terror Plan Phase 1B ASUMP

Dismentling of old single storey existing structures ( Barrack) by manual/ mechanical means including disposal of unserviceable material out side premises and stacking of serviceable material within the premises complete job. The dismentled material shall be handed over to the concerned unit holder (Double storey existing structure/ barrack/ LSQ block)

Providing, driving and installing driven cast-in-situ reinforced cement concrete piles of specified grade concrete mix, diameter and length below the pile cap, to carry safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of shoe and the length of pile to be embeded in the pile cap etc. all complete. (Length of pile for payment Shall be measured from top of shoe to the bottom of pile cap) 450 mm dia piles (M-30 mix)

Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor pile method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer-in- Charge Single pile upto 50 tonne safe capacity

Initial test (Test Load 2.5 times the safe capacity)

Routine test (Test Load 1.5 times the safe capacity)

Chipping of RCC Pile by way of chiseling/ through cutter etc upto cut off level by manually means M-30 piles.

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil

Providing and Laying of dry stone soling hand packed including all carriages complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting propping etc. and removal of form work for foundations, footings, basses of columns etc mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering including strutting, propping etc. and removal of form for:Columns, pillars, piers, abutments, posts and struts.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms.

Centering and shuttering including strutting, propping etc. and removal of form work for Edges of slabs and breaks in floors and walls under 20cms wide

Centering and shuttering including strutting, propping etc. and removal of form work for stairs (excluding landings) except spiral stair cases.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Supplying and filling in plinth with fine/sand under floors including, watering, ramming consolidating and dressing complete

Supplying and fillingGSB under floors in layers not exceeding 20 cm including, watering, ramming consolidating and dressing complete

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)

15mm cement plaster on the rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1 : 3 ( 1 cement : 3 fine sand)

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 50 mm thick with 20mm nominal size stone aggregate.

Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Welded

P/F Hi rib profiled Pre-colour coated sheets of eco-friendly colour comprising 0.50mm thickness for roofing including hooks, bolts and nuts 8mm dia or with PVC limpet washers complete upto any pitch in horizontal/vertical or curved surfaces excluding the coat of purlins, rafters and trusses and including cutting to size and shape wherever required including ridges of hips and valleys of 90cm width as directed by EIC all complete.

Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete Ridges plain (500 - 600mm)

Providing and fixing plained eaves boarding 2nd class kail wood 250x32 mm (nominal size )

Providing & Fixing 16mm dia truss bolts including nuts and washers etc complete.( 300mm Long ).

Providing & Fixing of 12mm thick ply wood including nails and screws and all carriages complete.

P/F of 12mm thick wooden panelling ( T&G) of spruce wood including 12mm thick plywood in frame work, scafolding charges, carriages, screws, and a coat of touch wood polish all complete.

Providing & Fixing of 50x50 mm thick wooden cornice of budloo wood incl. all carriages complete.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position Budloo / Fir wood

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete In colour such as White, Ivory, Grey, Fume Red Brown

Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in- Charge 18 mm thick

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite Work

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Silver wood.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second kail wood ( 30mm thick )

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood

Dry random rubble masonry with hard stone in foundation and plinth with bond stone.(Quarry)

P/F of following PVC pipes/ Fittings of approved brand ( Prince Type- B ) including trenching and refilling all complete.

100 mm Pipe

100 mm plain bend

100mm Door tee

100mm Collar

100mm Floor Trap

100mm Reducer

75mm Pipe

75 mm plain bend

75mm Door Tee

75mm Collar

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.

25mm pipe

32 mm Pipe

25mm union

32mm union

32mm dia stop cock

25mm stop cock

32mm tank nipples

Construction of brick masonary manhole of size 300x300 mm including C.I ( heavy duty ) cover and frame, plastering and concrete base all complete.

Providing and fixing of following C.P fittings of standard make as directed by Eic

Bibcock

Angle valve

C.P Nipple

C.P Cup

C.P Grating

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing uplasticized PVC connection pipe with brass unions

Looking mirror 1'-6''x2'-0'' With PVC Cover

Glass Shelf

Towel Rod

Soap Case

Health focet

Wall mixer

Basin Mixer

Sink mixer

PVC Waste pipe32 mm dia

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing of 1.0 Hp water pump of approved make like Crompton etc including all necessary fittings.

Providing and fixing of 50 litre water heater geyser of approved make like venus, jupiton, Racold, Jaguar or equivalent make including all necessary fittings complete

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink without drain board 610x460mm bowl depth 200mm

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Supply and installation of stainless steel AISI 304 hand rail and balusters having 50mm dia tube (1.5mm gauge) weight 3.70 Kg erected with chemical grout to be fixed on top of slabs /skirting at a distance os 600mm C/C complete with necessary bends and terminations complete.

Construction of brick masonary plate form for W.C using 2nd class bricks in 1:6 cement mortar including all carriages complete.

Providing and fixing of 1'-4" to 2’-0” deep kitchen cabnets/ Almirah of approved design & make including shutters, partitioning with 19mm thick (water proof) ply board of approved make and quality including back covering of 0.7mm thick water proof ply and fixing 1mm thick mica of approved colour and make over the frame and shutter, as around including cost of all fixtures i.e. glazing, locking arrangements, handle etc. as per the directions of site Engineer. (complete Job)

Painting with synthetic enamel paint with two or more coats of approved manufacture including a coat of priming coat.

Applying priming coa With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/ 10sqm)

Disposal of excavated earth beyond 50 mtrs by mechanical transport upto 5 kms lead due to restrained place at site of work, including loading unloading all complete.

Providing and fixing of aluminum fittings of approved brand including screws etc.complete as directed by EIC

Tower bolts 100mm long

Handle

150mm Tower Bolts

150mm Handles

100 mm Butt Hinges

150mm Butt Hinges

Providing and fixing of door Lock set with handle and body of approved quality and design of Godrej, Link or equavalent quality all complete

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

Carraige of amterial by Mechanical Transport including loading, unloading and stacking.

Sand Avg lead of 25 Km

Stone aggreg avg lead of 25 Km

Bricks avg lead of 30 Km

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group A

Group B

Group C

Supplying and Fixing suitable size G.I box with modular plate and cover in front on surface or in recess,including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch,connection,painting etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Wiring for Circuit/Submain Wiring along with earth Wire with the following Sizes of FRLSPVC insulated copper conductor,single core Cable in surface/ Recessed medium class PVC conduit as required.

1 X 1.5 SQ.MM (for loop earthing)

2 X 2.5 SQ.MM

2 X 4 SQ.MM

2 X 6.0 SQ.MM

2 X 10.0 SQ.MM

Supplying and foxing of following sizes of medium class PVC conduit along with acessories un surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.

Providing and fixing of maintenance free chemical earthing including diging/refilling of 10 feet deep pit in hard/ semi hard soil, chemical material and laying of GI electrode 3 mtr long 50 mm dia with chemical in the pit and filling the good earth in the pit completely and disposal of unwanted material from earthing site to disposal site. Extension earthing from earthing electrode upto the panel

Providing, fixing, installation and commissioning of following accessories including connections etc as required.

Neon indicator red lamp

Fan Dimmer 2 module

PVC round plate

Dummy blanking plate

Ceiling Rose

PVC Exhaust fan 200 mm, 5 blades

Ceiling fan 1200 mm, 3 blade including all mounting accessories(GI octagonal junction box etc)

12 way single door SPN distribution board mcb box

8 way double door TPN distribution board mcb box

6-16-32, 10KA breaking capacity amp v curve SP MCB complete connections.

40 amp DP, 10KA breaking capacity, c curve MCB complete connections

63 amp 10KA breaking capacity, DP MCB, c curve complete connections

12 w round led concealed/surface panel light.

Led tubelight, 05 watt, 1 feet long for mirror light

Led tubelight, 22 watt, 4 feet long

Providng and fixing of 40mm HDPE pipe industrial type for LT cable underground routing for terminations by way of excavation and back fill including removal or debris complete

Providing and laying of XLPE Insulated 3.5 core 95 sq.mm LT aluminium un-armoured cable to be laid from source to pannel including terminations, lugs, nuts and bolts as required.

Supply,assembling,installation of (as per approved sample) 100 watt LED flood Light powder coated, aluminium housing with heat sink IP 66 protected, with i/p AC90-300V.

Providing and fixing of Main Pannels 14 swg with double aluminium Bus bars and allied accessories of different size chambers conssits individual doors for MCB's and MCCB's, energy meter chambers and other switch gears etc as per IS standards and requirement complete with following details including grouting with foundation complete.

Panel size

VIF meter with CT and indicators

Aluminum bus bars

MCCB 100 amp, three pole, 16 KA.

MCCB 250 amp, three pole, 25 KA.

Manual 3-Pole Change over onload 100 amp

Please Enable Macros to View BoQ information