Upgradation works in the Judicial Department Officers chambers and library at Assam Secretariat E-Block 2nd floor, Dispur

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion, Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Float glass panes 9.7.7.1 4 mm thick glass pane (weight not less than 10kg/sqm)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing ftting fixing PVC panels for wall and ceiling (Plain) with mterial & installation including labour, carriage etc. as direcsted and specified.

Supplying ,fitting and fixing Johnson Zebra Roller Blinds Combi Blackout) make and shade, design as per choice complete as specified and directed by the Deptt. At all levels

Providing & finishing of 35mm thick flush rood bothside with 6mm plyboard Pasting and 1.5 mm decorative laminate pasting finished with PU polich as per desired colour and shade as per Archietects instructions and provided with door clousers , 125mm long 2.9mm thick Heavy duty S.S. bearing hinge Mortice Lock with Handle (all fittings to be of DORMA make as specified in the drawings ) complete with all other necessary hardware as per design specified and directed by the Deptt. consultant.

PRODUCT -AL-60 WORKSTATION:- Table top and 1200 HT Partitions Specification : Partition : AL 60, Height 1200 mm Table top 25mm thick Pre-laminate particle board finished with 2mm edge lipping. Tile Finishers Partitions : Partitions is made of 60mm thick with fabric above and laminate below the table top. Fabric magnetic and laminate board markers are provided for each workstation .Return and end screen : 525L x 12mm fabric magnetic screens. Support : MS Brackets and gable ends Wire Management : Grommet Hole provided on table top. Raceway provided below table top. MOBILE PEDESTAL 2D+ 1F SIZE: 400Wx 450D X 600 HT Pedestal: Pedestal are made of 18mm thick. PLB with 2 drawer units and 1 filling folder unit. The Drawer units are made mobile with the use of castors. The drawer units are provided finger grooved handle and suitable locks. CPU TROLLEY AND KEYBOARD TRAY

Work station & Receiption chairs Model Contact Project MB Medium mesh back chair single lock synchro mechanism Fixed arms Nylon base

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. GROUP-C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Telephone socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 1 or 2 Module e (75mmX75mm

4 Module (100mmX75mm)

4 Module (125mmX75mm)

6 Module (200mmX75mm)

8 Module (125mmX125mm)

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable

2 run of cable

3 run of cable

Supply, installation Testingand Commissioning of 1200mm sweep BEE 5 star rated, ceiling fan with Brush Less Direct ccurrent (BLDC) Motor class of insulation B 3 nos. blade ,30cm long down rod, 2 nos. canopies shackle kit safety rope copper winding, Power Factor not less than 0.9 service value (CMM/W) minimum 6.85, Air deliveery minimum 215CMM, 350RPM (Tolerance as per IS 374-2010 THD less than 10% remote or electronic.regulator unit ofr speed contron and all remaining accessories incluidng safety in, nut,bolts washers, temperature rose =75 degree C (max) insulation resistance more that 2 mega ohm, suitale for 230 v, 50Hz single phase AC supply earting etc. complete as required.

supplying with fitting fixig of surface & wall mounted LED laminaries complete with all accessories inclding driver directly on wall ceiling including connection with 1.5 sq. q.mm P.V.C. omsi;ated S.C. copper conductor as required and as directed by the Deptt. 9Crompton/Phillips/Bajaj/Havells or equivalent sonsidering the mother items rate and specification

Supplying and commissioning of the following indoor recessed Type Rouknd Lumanairs complete with all accessories inclding driver in the false ceiling (Armstrong) /Gypsum or similar type mounted with necessary rupport and connection with 1.5 sq.mm PVC insulated SC copper conductor as required andas directed by the Deptt. (Crompton/Havells/Phillips or equivalent make ( 20W Recessed round type Led Fitting)

Supplying fitting fixing of following 4P 240-440V 'C" deries 10KA MCB in the existing DB/Panel as specified and directed by the Deptt. (Havells or equivalent make )

Supplying incuding fitting fixing of foollowing AC wall fan in the wall of follwing sweep with making necessary connectiion as approved by the Deptt. As required and dired by the Deptt. (UDHA or equivalent make) (400mm Sweep

Supplying incldign fitting fixing of RJ 510 Posrt