COMPREHENSIVE ANNUAL REPAIR AND MAINT (DAY TO DAY) INCLUDING B/R WORKS, INTERNAL AND EXTERNAL MD ACCN UNDER AGE B/R-II OF GE (EAST) AGRA

Amount

For Ser No 02 to 150 (Please refer the Schedule 'A' Note before quoting)

Taking down chowkhats with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) but exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and directed.

Taking down shutter, easing & adjusting necessary repair and refixing of old shutters in same opening exc 1.00 Sqm each and n exc 2.00 Sqm complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm each and n exc 2.00 sqm complete all as specified and directed.

S&F tubular steel farmed work as in doors (as in ckowkats) for single door frames of 2.5mm thick size 100x50mm including necessary fixing lugs, lock strike plate, incl locking arrangement etc. complete all as specified and directed. (Weight of tubular steel not less than 5.33 Kg/RM).

S & F tubular steel farmed work as in doors (as in ckowkats) for double door frames of 2.5mm thick size130 x 65 including necessary fixing lugs, lock strike plate incl locking arrangement, etc complete all as specified and directed. (Weight of tubular steel not less than 6.99Kg/RM).

S&F Factory made PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19x19mm MS Square tube, EPDM rubber gasket weather seal shall be provided throughout the frame, the profile shall be mitre cut at two corners and joined by inserting 2 Nos of 150mm long brackets of 15x15mm MS square tube inside the 19mmx19mm MS square tube and suitably screwed to be fixed with 08 Nos 75mm long MS Screws with PVC fasters per chowkhat complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

M&L for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) for fixing hold fast/in chowkhat complete all as specified and directed.

S&F 30 mm thick flush shutters, board solid core construction, with block board core and plywood face panels, commercial side on both side ete complete all as specified and directed.

S&F 30 mm thick flush shutters, board solid core construction, with block board core and plywood face panels, on both face covered with decorative face veneer with lipping / frame to match ete complete all as specified and directed.

S&F Glazed or skeleton factory made door shutter, 35mm thick of second class hard wood (hollock), open rebated and prepared to receive glass, gauge ( without sash bars) with plain, chamfered or rounded, mitred beads for glass etc , size of members of shutters shall be as specified in SSR Part I, section -8 clause 8.24 (a) complete all as specified and directed.

S&F 100 mm long medium Aluminium, anodised l Butt hinges complete all as specified and directed.

S&F100 mm size stainless steel butt hinges medium weight cold rolled complete all as specified and directed.

S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repair 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and directed.

M&L for providing oil putty to existing glass pan of steel window complete including preparing surface to receiv putty complete all as specified and directed.

S&F in repair 18 mm thick with min density 650 Kg / cum LEAD FREE PVC Celluka ply of single side rigid laminate of approved color and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s instructions including dismantling of existing timber boarding complete all as specified and directed.

S&F mild steel 40mm dia decorative knob for kitchen cupboard complete all as specified and directed.

S&F 75 mm long cast brass with mild steel hinge pin, bright polished and fixed, type B-12 complete all as specified and directed.

S&F 125mm long aluminium anodised Hasp and Staple, safety type including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F Brass magnet catcher suitable for CB/cabinet shutter complete all as specified and directed.

S&F in repairs for factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete without glazing bars dovetailed or welded and making good the disturbed wall surfaces in CM (1:2) or PCC (1:2:4) type B1(including necessary arrangements to fix the same in multy storey bldgs up to G+2) complete all as specified and directed.

S&F in repairs for factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete with glazing bars (wire mesh shutter) dovetailed or welded and making good the disturbed wall surfaces in CM (1:2) or PCC (1:2:4) type B1 (including necessary arrangements to fix the same in multy storey bldgs up to G+2) complete all as specified and directed.

S&F in repair steel ventilators with top hung shutter & glazing bars hinges, steel peg stay and making good the disturbed wall surfaces in CM (1:2) or PCC (1:2:4) type B1 (including necessary arrangements to fix the same in multy storey bldgs up to G+2 complete all as specified and directed.

S&F in repair powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including grill necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc. complete all as specified and directed.

S&F framed work such as guard bars, grills etc and similar work confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

S&F in repair steel peg stay for steel window/ ventilator complete all as specified and directed.

S&F in repair 5.5 mm thick sheet glass, ordinary quality and fixed with aluminium beading and gasket suitable for aluminium frames in squares exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F in repair 40mm dia Cup Board knobs fixed with nut, screws Each and washers of mild steel, brass polished complete all as specified and directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flap (when open) 40 mm complete all as specified and directed.

S&F in repair Continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flap (when open) 40 mm complete all as specified and directed.

S&F Magnetic Catcher as in ‘Kitchen Cabinets’ Cupboards, Bath Cabinets etc complete all as specified and directed.

S&F in repairs drapery rod 25mm dia with Stainless steel bright finish pipe both, side cups including fixing with stainless steel bracket with drilling holes in walls brackets etc complete approved quality and colour complete all as specified and directed.

S&F in repair for 3 mm thick sheet glass ordinary quality and glazing with silicon for glass fixing in square not exc 0.5 Sqm in each pane complete all as specified and directed.

All as per item No 38.00 above but figured glass, pin head type complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm dia fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm dia fixed with stainless steel wire staples complete all as specified and directed.

Taking down of plaster from wall/ celing and soffits of chajja etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed.

M&L brick work in CM 1:6 with sub class B, brick & straight or curved on plain exceeding 6m mean radius complete all as specified and directed.

M&L for 12mm thick smart case ready mix plaster (coverage area 24-28 kg/sqm) is a specially designed ready to use cement based plaster with high quality polymer additives and well graded sand and fillers which can be used for plastering (as per manufacture instructions) over exterior wall surfaces finish the surface even & smooth complete all as specified and directed. .

M&L for 12mm thick smart care ready mix plaster (coverage area 24-28 kg/sqm) is a specially designed ready to use cement based plaster with high quality polymer additives and well graded sand and fillers which can be used for plastering (as per manufacture instructions) over interior wall surfaces finiish the surface even & smooth complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:4 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for Preparation of newly plaster surface of wall and applying two coats of cement base paint over one coat of cement base primer complete all as specified and directed.

M & L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying ement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed. (Note : Providing grooves shall be measured and paid separately).

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed.

S&F in repairs PVC low level flushing cistern of 10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified and directed.

S&F in repair PVC connections of 450mm long suitable for 15mm dia iron pipe incl PTMT nuts complete all as specified and directed.

S&F in repair PVC connections of 600mm long suitable for 15mm dia iron pipe incl PTMT nuts complete all as specified and directed.

S&F in repair plastic water closet seat cover, white/ black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

S&F in repair vitreous china WHB white flat back size 550x400mm including Supplied and fixed angle iron brackets, 32 mm dia CP waste coupling and PVC waste pipe 800 mm long, complete all as specified and directed.

S&F pillar taps long body fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified and directed.

S&F in repair pillar taps long body fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified and directed.

S&F in repair angular valve ,long threaded 15mm dia, cast copper alloy, CP fancy type with long shank and cup screwed down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F in repair 15 mm bore CP concealed Stop valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair bib taps long body cast copper alloy chromium plated with long shank, crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified and directed.

S&F in repair C.P. grating 100/125 mm dia as reqd at site complete all as specified and directed.

S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.

M&L in replacement of brass face spindle of existing 15mm dia bore bib cock, stop cock, angle valve, angle valve (concealed), C P Pillar cock, Wash basin mixture and valve mixture of any description fixed complete all as specified and directed.

S&F in repair PVC Cabinet mirror (Single Door) size 422X622 etc complete all as specified and directed.

S&F in repair stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm bore pipe etc complete all as specified and directed.

S&F in repair stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore pipe etc complete all as specified and directed.

S&F in repairs CP hand shower (health faucet) with 1 meter long easy flex tube in chrome finish and wall hook complete all as specified and directed.

S&F in repairs CP Soap dish 100mm dia fixed with CP screws etc complete all as specified and directed.

S&F in repair glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs plate rack of stainless steel, 1mm thick for kitchen or labotary, overall size 750x900x250 mm ,fixed with plugs and washers on wall complete all as specified and directed.

S&F in repair CP tubular towel rail, 60 cm long, 20mm bore, chromium plated complete all as specified and directed.

S&F in repairs CP shower rose 125mm dia along with shower min 600 long arm complete all as specified and directed.

S&F in repair 15 mm bore wall mixer with telephonic Shower arrangement with connecting legs & Wall flanges, fixed complete all as specified and directed.

S&F in repair 15 mm dia two way bib taps (fancy type), cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed.

S&F 15 mm bore CP WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F 15 mm bore CP Sink mixer swan neck for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair for 15mm Bib Cock (PTMT) , screwed for steel pipes, fixed in repairs, complete all as specified and directed.

S&F in repair kitchen sink with draining board made of stainless steel 1mm thick with sink coupling & waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x160 mm complete all as specified and directed.

S&F in repairs vitreous China squatting pan (Orissa pattern), white, of size 580x440mm white, with CI 100mm 'P' or 'S' trap, integral foot rests including flush pipe, trap, lime concrete bedding including taking out of old lime concrete bedding, unserviceable connections etc connecting up new and making good disturb portion complete all as specified and directed.

S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with CI 'P' or 'S' trap including connection to trap and cistern and flush pipe (excl flushing cistern ) and making good to disturbed surface of floor all fixed complete all as specified and directed.

Taking down & refixing EWC Vitreous China after necessary repair work including connection to P/S trap, seat cover, flushing cistern, flush pipe etc complete all as specified and directed.

Taking down & refixing WHB Vitreous China after necessary repair work including connection to taps waste fittings etc complete all as specified and directed.

S&F in repairs waste coupling, brass chromium plated for kitchen sink, etc with long screwed shanks and fly nuts, complete all as specified and directed.

S&F in repairs waste coupling, brass chromium plated for WHB, etc with long screwed shanks and fly nuts, complete all as specified and directed.

S&F in repairs PVC waste pipes of 40/32mm bore heavy duty type suitable for wash hand basins/sinks complete all as specified and directed.

S&F in repair 20 mm dia PVC float Valves high pressure, with polythene float and fly nut complete, screwed for Iron pipe or brass ferrule complete all as specified and directed by the Engineer-in-charge.

M&L for 0.50 mm thick plain galvanised mild steel sheeting with grade of zinc coating 275 cit to shape, riveted including bending , turning up required for fabrication of covers for HDPE water tanks made to shape as required for suitable to protection of monkey menace , complete all as specified and directed.

S&F in repair Internal kit including flush handle & float for low level flushing cistern complete all as specified and directed.

S&F in repairs CP overhead shower rose of dia n. exc 125 mm, fancy type with arm and wall flange complete all as specified and directed.

S& F of 15 mm dia brass nozzle male thread complete all as specified and directed.

Dismantling of floor, hearth or wall tiles / terrazo/mozaic (floor, dado) including cement mortar bedding (but not backing),removal serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L Non-skid coloured Joint free tiles 7 to 8 mm thick ( square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm ,in floors etc.set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified and directed.

M&L for non-skid ceramic coloured tiles (Premium quality) (square/ rectangular) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm in skirting etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tiles over 10mm thick plaster in CM 1:4. complete all as specified and directed.

M & L Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , including 15mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete all as specified and directed.

All as per Item No 96.00 above but in skirting over 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for pre-polished single piece Kota stone slab 20-25 mm thick in riser of steps, skirting, dado including 10mm thick plaster or bedding layer in CM (1:3) for receiving the tiles and jointed complete all as specified and directed.

M&L Machine cut pre polished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 20mm thick screed bed CM (1:6) complete all as specified and directed.

M&L for granite (of any type) work (table rubbed and polished) 20 mm thick in steps, cills, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) of thickness 10 mm and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L for preparation of old plastered or unplastered surfaces of wall and apply one coat of distemper oil emulsion white or tinted complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over and including two coat of JK/Birla wall care putty to match the existing as required, complete all as specified and directed.

M & L for preparation of new plastered or unplastered surfaces and apply three coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of wall including brooming down by steel wire brushing, scraping down, smoke spot, moulds moss, efflorescent salts, trading oil, grasy sports and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of Ceiling including brooming down by steel wire brushing, scraping down, smoke spot, moulds moss, efflorescent salts, trading oil, grasy sports and applying one coat of white wash complete all as specified and directed.

M & L preparation of old painted wood & wood based surfaces of any description over 10 cm width or girth and apply one coat of synthetic enamel paint wood or tinted complete all as specified and directed.

M & L preparation of old painted steel surfaces of any description over 10 cm width or girth and apply one coat of synthetic enamel paint on Steel surface complete all as specified and directed.

M & L for preparation of new wooden surfaces over 10cm width or girth and applying two coats synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10 cm width or girth, not otherwise described complete all as specified and directed.

M&L in repairs for 1.00mm thick mild steel black sheet as in steel door/gate and similar works cut to size, holes punched including round headed screw welded etc complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Mild steel farmed work as in doors (as in ckowkats) or gates of angle or other section with guest plates rail, brasses rail etc exclusive of steel sheeting or other covering hanging also fastening and fixing complete confirming to Gde Fe-290 (Gde E-165) including shop coat of red oxide including preparation of surface before fixing complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls, including all fittings like PVC bend , Tee etc and taking down old unsv rainwater pipes complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including all necessary fittings like PVC bend, Tee etc and taking down old unsv rainwater pipes complete all as specified and directed.

S&F 50mm bore High density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq. cm including band tee, socket and fixing of 100Cm/centre to centre clamps out of 50 mm by 5 mm flat iron fixed with suitable bolt / screws securing etc complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) bends sith complete fittings of any radius complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) bends with complete fittings of any radius complete all as specified and directed.

S&F in repair Flush pipes to pedestal pan, including all joints complete all as specified and directed.

S&F in repair 100 mm long medium aluminium Butt hinges complete all as specified and directed.

S&F in repair 150 mm long stainless steel handles, cast type polished bright complete all as specified and directed.

S&F in repair 200 mm long stainless steel, barrel tower bolts of extruded section complete all as specified and directed.

S&F in repair floor door stopper of stainless steel sliding body and tongue, anodized of lentgh 100 mm including rubber shoed fixed wooden or aluminium frame (door/shutter) complete all as specified and directed.

S&F in repair 250 mm stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F in repair 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and directed.

S&F in repair hasp and staple of size 75 mm long, safety type of aluminum anodized complete all as specified and directed.

M&L for door seal with stainless steel strip complete all as specified and directed.

S&F in repairs rotational moulded polyethylene water storage tank (cylindrical vertical with threaded type closed top) hoisted and jointed in position all as specified in SSR Part-I (500 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, threaded type lockable cover complete all as specified and directed.

S&F in repairs rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, threaded type cover complete all as specified and directed.

Cleaning and removing all scale and dirt etc from overhead water storage tanks of capacity exc 250 ltrs but not exc 500 liters including cleaning the mouths of circulating pipes complete all as specified including washing the tank with bleaching powder and writing the date of cleaning on outer wall of tank with synthetic enamel paint complete all as specified and directed.

Cleaning and removing all scale and dirt etc from overhead water storage tanks of capacity exc 500 ltrs but not exc1000 liters including cleaning the mouths of circulating pipes complete all as specified including washing the tank with bleaching powder and writing the date of cleaning on outer wall of tank with synthetic enamel paint complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15mm bore GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F 20mm bore GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded Stone aggregate in plinth protection finisheed even and smooth without using extra cement including forming necessary joints 10 mm wide to the full depth of PCC at every 3 metre and filled with sealing compound grade A including demolition of existing concrete complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet AZ - 150 thickness of sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self-tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet AZ - 150 thickness of sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self-tapping screws complete all as specified and directed.

S & F in repair 20mm tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/ 20mm 45gms /25mm- 65gms complete all as specified and directed.

S&F in repair 100 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints fixed to walls including making good disturb portion to match the existing complete all as specified and directed.

S&F 75 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints fixed to walls including making good disturb portion to match the existing complete all as specified and directed.

S&F 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors and cement joint including making good disturb portion to match the existing complete all as specified and directed.

S&F 100 mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors and cement joint including making good disturb portion to match the existing complete all as specified and directed.

S&F 75 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors and jointed with cement joint including making good disturb portion to match the existing complete all as specified and directed.

S&F 75 mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors and cement joint including making good disturb portion to match the existing complete all as specified and directed.

S&F in repair of brass elbow of size 20mm outer mm dia complete all as specified and directed.

S&F in repair of female brass thread adaptor of size 20 mm outer dia complete all as specified and directed.

S&F in repair of tank adaptor of size 20 mm outer dia complete all as specified and directed.

Supply and fixing in repair of union of size 20 mm outer dia complete all as specified and directed.

Supply and fixing in repair of brass tee of size 20 outer mm dia complete all as specified and directed.

M&L for greasing of existing steel window (of any type and size n.exc 4Sqm each) and making suitable for easy opening/ closing of shutters including cutting of jambs/ cills etc and making good the disturbed surfaces including necessary welding work etc complete all as specified and directed.

Shiva Enterprises (BID ID -3369598)

3Krishna Enterprises (BID ID -3369475)

N.K. ENTERPRISES (BID ID -3369448)

VARDMAN ENTERPRISES (BID ID -3371051)

M/S RADHEY GOVIND ENTERPRISES (BID ID -3370027)

M/s SCHOLASTIC ENTERPRISES (BID ID -3369831)