Construction of Camp Office for Hon'ble Deputy Chief Minister, Government of Telangana at Khammam in Khammam District

CIVIL WORKS: Masonry work in CM(1:6) prop (Cement : Screened sand) with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, cost of overheads and contractors profit etc., complete for finished item of work. (APSS No. 501 & 504) Ground Floor

Masonry work in CM(1:6) prop (Cement : Screened sand) with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, cost of overheads and contractors profit etc., complete for finished item of work. (APSS No. 501 & 504) First Floor

Reinforced Masonry for partition walls (100 mm thick) in CM (1:6) prop. (Cement : Screened sand) using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, and cost of overheads & contractors profit etc., but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 509) Ground Floor

Reinforced Masonry for partition walls (100 mm thick) in CM (1:6) prop. (Cement : Screened sand) using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, and cost of overheads & contractors profit etc., but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 509) First Floor

Ornamental ceiling plastering 12mm thick using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) Ground Floor

Ornamental ceiling plastering 12mm thick using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) First Floor

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)Ground Floor

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) First Floor

Flooring with digital / polished glazed vitrified tiles with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and of size 800 x 1600 mm and thickness between 9-11 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site (excluding cost of C.C. bed), base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707) Ground Floor

Flooring with digital / polished glazed vitrified tiles with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and of size 800 x 1600 mm and thickness between 9-11 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site (excluding cost of C.C. bed), base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707) First Floor

Skirting with digital / polished glazed vitrified tiles with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and of size 800 x 1600 mm and thickness between 9-11 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush online with plastering. Ground Floor

Skirting with digital / polished glazed vitrified tiles with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and of size 800 x 1600 mm and thickness between 9-11 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush online with plastering. First Floor

Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of premium colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707) Ground Floor

Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of premium colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707) First Floor

Skirting with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) of premium colours (other than black) in single piece with edges flat nosed set over a base coat of CM (1:5) 12 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement sand (with 50% river sand & 50% manufactured sand), water flooring stones etc. to site , cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges, cost of overheads & contractors profit etc. complete for finished item of work (APSS No.701 & 707) Ground Floor

Skirting with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) of premium colours (other than black) in single piece with edges flat nosed set over a base coat of CM (1:5) 12 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement sand (with 50% river sand & 50% manufactured sand), water flooring stones etc. to site , cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges, cost of overheads & contractors profit etc. complete for finished item of work (APSS No.701 & 707) First Floor

Providing risers with 16 to 18mm thick high polished granite stone slabs of premium colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work for Risers (S.S.701 & special) Ground Floor

Providing risers with 16 to 18mm thick high polished granite stone slabs of premium colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work for Risers (S.S.701 & special) First Floor

Providing 16 to 18mm thick high polished granite stone slabs of premium colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges cost of base coat and overheads & contractors profit, complete for finished item of work for treads (S.S.701 & special) Treads Ground Floor

Providing 16 to 18mm thick high polished granite stone slabs of premium colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges cost of base coat and overheads & contractors profit, complete for finished item of work for treads (S.S.701 & special) Treads First Floor

Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1982 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat, overheads and contractors profit, etc. complete for finished item of work as per Idia Gypsum Ltd specification. Ground Floor

Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1982 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat, overheads and contractors profit, etc. complete for finished item of work as per Idia Gypsum Ltd specification. First Floor

Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based such as birla wall care putty or equivalent of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for internal walls - :-Internal Colouring - Providing Putty. Ground Floor

Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based such as birla wall care putty or equivalent of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for internal walls - :-Internal Colouring - Providing Putty. First Floor

Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 30 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for Internal walls - Plastic emulsion paint - 2 Coats + 1 coat primer. Ground Floor

Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 30 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for Internal walls - Plastic emulsion paint - 2 Coats + 1 coat primer. First Floor

Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 30 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Exterior Grade- 2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 3 Coats. Ground Floor

Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 30 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Exterior Grade- 2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 3 Coats. First Floor

Supplying and fixing stainless steel works such as raling, hand rale, grills etc., using Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & Diameters for - 304 Grade as per the approved drawing including cost and conveyance of all materials to site, Labour charges for Fabrication of stainless steel works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish, overheads & contractors profit etc ., complete for finished item of work. Ground Floor

Supplying and fixing stainless steel works such as raling, hand rale, grills etc., using Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & Diameters for - 304 Grade as per the approved drawing including cost and conveyance of all materials to site, Labour charges for Fabrication of stainless steel works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish, overheads & contractors profit etc ., complete for finished item of work. First Floor

Providing specialized high performance acrylic polymer modified elastomeric cementitious waterproof coating to the terrace / walls / internal portion of the bathroom & toilets / internal portion of the water tanks duly cleaning of the surface from dirt, dust and other contaminations, providing and application of Two coats of High-performance Acrylic polymer modified Elastomeric cementitious waterproof coating ( 1.8 Sq. Mtr. / Kg /Each Coat )including cost and conveyance of all materials to site, all incidental, operational, labour charges, cost of overheads & contractor profit complete for finished item of work.

Flooring with double charged Matt Full body virtified tiles of size 600x1200 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site (excluding cost of C.C. bed), base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707) Ground Floor

Flooring with double charged Matt Full body virtified tiles of size 600x1200 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site (excluding cost of C.C. bed), base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707) First Floor

Dadooing to walls with double charges Matt Full body virtified tiles of size 600x1200 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, coloured cement, overheads & contractors profit etc., to site, cost of all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge. Ground Floor

Dadooing to walls with double charges Matt Full body virtified tiles of size 600x1200 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, coloured cement, overheads & contractors profit etc., to site, cost of all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge. Second Floor

Supply and Fixing of 8mm Clear Toughned Glass In Hand Railing by using 9mm MDF Templates

Supplying and fixing Double shutter Door to existing Teak wood Frame of solid bond wood block board type with teak veneer on both faces as per the Architects selection 40 mm thick conforming to IS:2202 including cost of Brass fixtures such as tower bolts of 18", Aldrops -12", 8 No. Antique brass Butt hinges of 5" , PVC door stop bush. And including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. cost of overhead & contractors profit complete for finished item of work as per APSS 1001 & 1002. (1.56 x 2.41) Ground floor

Supplying and fixing Double shutter Door to existing Teak wood Frame of solid bond wood block board type with teak veneer on both faces as per the Architects selection 40 mm thick conforming to IS:2202 including cost of Brass fixtures such as tower bolts of 18", Aldrops -12", 8 No. Antique brass Butt hinges of 5" , PVC door stop bush. And including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. cost of overhead & contractors profit complete for finished item of work as per APSS 1001 & 1002. (1.56 x 2.41) First floor

Supplying and fixing Double shutter Door to existing Teak wood Frame of solid bond wood block board type with teak veneer on both faces as per the Architects selection 40 mm thick conforming to IS:2202 including cost of Brass fixtures such as tower bolts of 18", Aldrops -12", 8 No. Antique brass Butt hinges of 5" , PVC door stop bush. And including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. cost of overhead & contractors profit complete for finished item of work as per APSS 1001 & 1002. (1.56 x 2.41) Second floor

Supplying and fixing Single shutter Door to existing Teak wood Frame of solid bond wood block board type with teak veneer on both faces as per the Architects selection 40 mm thick conforming to IS:2202 including cost of Brass fixtures such as tower bolts of 18", Aldrops -12", 8 No. Antique brass Butt hinges of 5" , PVC door stop bush. And including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. cost of overhead & contractors profit complete for finished item of work as per APSS 1001 & 1002. first floor

Supplying and fixing Single shutter Door to existing Teak wood Frame of solid bond wood block board type with teak veneer on both faces as per the Architects selection 40 mm thick conforming to IS:2202 including cost of Brass fixtures such as tower bolts of 18", Aldrops -12", 8 No. Antique brass Butt hinges of 5" , PVC door stop bush. And including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. cost of overhead & contractors profit complete for finished item of work as per APSS 1001 & 1002. Ground floor

Supplying and fixing Single shutter Door to existing Teak wood Frame of solid bond wood block board type with teak veneer on both faces as per the Architects selection 40 mm thick conforming to IS:2202 including cost of Brass fixtures such as tower bolts of 18", Aldrops -12", 8 No. Antique brass Butt hinges of 5" , PVC door stop bush. And including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. cost of overhead & contractors profit complete for finished item of work as per APSS 1001 & 1002. Ground floor

Supplying and fixing Single shutter Door to existing Teak wood Frame of solid bond wood block board type with teak veneer on both faces as per the Architects selection 40 mm thick conforming to IS:2202 including cost of Brass fixtures such as tower bolts of 18", Aldrops -12", 8 No. Antique brass Butt hinges of 5" , PVC door stop bush. And including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. cost of overhead & contractors profit complete for finished item of work as per APSS 1001 & 1002. First floor

Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh shutter – (2-glass shutters and 1-mesh shutter) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin)of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.20 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x 2.0 mm fitted with Vinyl Coated Fibre mesh- on rollers/ pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.

Providing and fixing of top hung Ventilator with fly mesh made of pre-painted steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc, finish painted with a polyester paint, section for fly-shutter of 0.6 mm thick and fitted with stainless steel 32 gauge fly mesh of 304 grade and mullions to have double rebate for glazed shutter and fly-shutter with a provision for guard bars/grills and 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch etc., complete for finished item of work for (i) Single open able ventilator shutter window size of 2’ 0” x 2’ 0” (609.6 x 609.6mm) outer frame section size of 100 x 45mm, Glazed and fly mesh shutter frame section size of 52 x 25mm thick and (ii) Double open able ventilator shutter window Size of 4’ 0” x 2’ 0” (1219.2mm x 609.6mm) outer frame section size of 100 x 45mm, Glazed and fly mesh shutter frame section size of 52 x 25mm, vertical mullion section size of 100 x 60 mm and (iii) Double open able fix shutter window size of 4’0” x 3’0” (1219.2mm x 914.4mm) outer frame section size 100 x 45mm , Glazed and fly mesh shutter frame section size 52 x 25 mm ,Vertical mullion section size of 100 x 60 mm

Providing cladding with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) of premium colours (other than black) in single piece set over a base coat of CM (1:3) 20 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement sand (with 50% river sand & 50% manufactured sand), water flooring stones etc. to site, cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges, cost of overheads & contractors profit etc. complete for finished item of work. (APSS No.701 & 707)

Providing Kitchen Platform and dadoing with Alabaster White Quartzite 16 to 18 mm thick up to 8'-00 (2.43 M) black set over a base coat of CM (1:8) prop. 20mm thick, including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work (APSS No.701 & 707)

Supply & applying Melamine Polish Glossy/ Matt finish to the wood works duly cleaning the surface and applying emery paper, Sand the wood with 180 No., emery paper and then with 320 No., emery paper, clean & wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper, apply two component wood sealer, air dry for 24 hrs, Sand with 320 No emery paper, applying one coat of approved spraying thinner (for spraying)/ applying one coat of approved brushing thinner or general purpose thinner (for brushing) and apply (either with spray or brush) two coats of approved brand melamine including cost & labour charges, emery papers, cost of thinner & melamine polish of approved brands such as Jenson & Nicholson, Asian Paints, Berger Paints or equivalent etc., including overheads & contractors profit complete for finished item of work for:-Polishing to wood work - Melamine Polishing to Wood Work.

Half Rounding the edges of marble/Granite stone slabs of all thicknessess including polishing the same

Providing, fabricating and fixing MS gate (Sliding / Openable) as detailed in drawing using 50x50mm bright rod,16mm Ms rod,100mm ISMC,32mm Ms road along with required motors of 230V AC BFT or Ditech make , necessary basic fitting that oes woth the motor, Remotes 2 no's, 5 mtr 30x12mm gear racks with fittings & push botton Option , Photocell sensors along with required labour, plant, machinery required drilling, aligning, bracing, bolting, welding and grouting with non shrinking readymade grout to correct line and level as per manufacturer's instruction and direction of the Engineer-in-charge. Further including grouting of metal rails for sliding / rolling gates, providing and fixing required hardware, aligning, leveling and keeping in position. Rate shall also include fine cutting into stone / concrete, protecting, grouting thereafter. All complete as shown in the drawings and entire satisfaction of the PM.

WATER SUPPLY AND SANITARY S&F of 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc. complete for finished item of work - WS & Sanitary

Supplying & Fixing 15 mm nominal size PVC connection with brass union nut C.P coated , including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc. complete for finished item of work

S&F of Towel rod 24 " premium make powder coated stainless steel body with 10 years warranty , including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc. complete for finished item of work - WS & Sanitary

S&F of Chromium plated finish stainless steel body Toilet paper holder with 10 years warranty, including cost and conveyance of all materials to site, all operational, incidental, labour charges, overhead & contractor's profit etc., complete for finished item of work in all floors as directed by Engineer-in-charge - WS & Sanitary

Supply and fixing CP finish brass soap dish of approved make with screws, including cost and conveyance of all materials to site, all operational,incidental , labour charges and overhead & contractor's profit etc. complete for finished item of work as directed by Engineer-in-charge - WS & Sanitary

S&F Stainless steel 4" dia round Grating for nahany or floor trap cover with cockroach trap with or without hole, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads & contractors profit etc. complete for finished item of work - WS & Sanitary

S&F premium make CPVC Pipes including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials to site, all operational, incidental, labour charges, cost of overheads & contractor profit etc.complete for finished item of work as directed by Engineer-in-charge 22.20mm OD Pipe - SDR 11 - WS & Sanitary

S&F premium make CPVC Pipes including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials to site, all operational, incidental, labour charges, cost of overheads & contractor profit etc.complete for finished item of work as directed by Engineer-in-charge 28.60mm OD Pipe - SDR 11 - WS & Sanitary

S&F premium make CPVC Pipes including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials to site, all operational, incidental, labour charges, cost of overheads & contractor profit etc.complete for finished item of work as directed by Engineer-in-charge 41.30mm OD Pipe - SDR 11 - WS & Sanitary

S&F premium make CPVC Pipes including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials to site, all operational, incidental, labour charges, cost of overheads & contractor profit etc.complete for finished item of work as directed by Engineer-in-charge 54.00mm OD Pipe - SDR 11 - WS & Sanitary

Supplying and fixing of SWR PVC pipes of 4 Kg/Sq.cm. and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps with required number of Bombay nails etc., with solvent jointing as per standard practice including cost and conveyance of all materials to site, all operational, incidental, labour charges, overheads & contractors profit etc., complete for finished item of work at all floor levels . (APSS No. 1302 1319 & 1326) - 75mm dia - WS & Sanitary

Supplying and fixing of SWR PVC pipes of 4 Kg/Sq.cm. and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps with required number of Bombay nails etc., with solvent jointing as per standard practice including cost and conveyance of all materials to site, all operational, incidental, labour charges, overheads & contractors profit etc., complete for finished item of work at all floor levels . (APSS No. 1302 1319 & 1326) - 110mm dia - WS & Sanitary

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover

Supply,Installation and commissioning of approved make wash down wall mounted EWC (JAGUAR make KUBIX Prime model No KUS-WHT-35953BIUFSMPM) with concealed flush tank of Jaguar make APC-WHT-5012500WS and Pneumatic flush plate with dual flush of Jaguar make MODEL NO.ACP-CHR-5012505 conforming to IS:2556(part-16)-2002 with P trap ultra solid cover of approved make with rubber buffer and cap, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc.,. complete as per standard practice for finished item of work.

Supply,Installation and commissioning of approved make wash down wall mounted EWC (JAGUAR make KUBIX Prime model No KUS-WHT-39953BIUFSMPM) with concealed flush tank of Jaguar make APC-WHT-5012500WS and Cilica Pneumatic flush plate with dual flush of Jaguar make MODEL NO.ACP-CHR-5012505 conforming to IS:2556(part-16)-2002 with P trap ultra solid cover of approved make with rubber buffer and cap, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc.,. complete as per standard practice for finished item of work.

Supplying and fixing of SWR PVC pipes of 4 Kg/Sq.cm. and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps with required number of Bombay nails etc., with solvent jointing as per standard practice including cost and conveyance of all materials to site, all operational, incidental, labour charges, overheads & contractors profit etc., complete for finished item of work at all floor levels . (APSS No. 1302 1319 & 1326) - 40mm dia - WS & Sanitary

S & F of Concealed Body of Thermostatic Shower Mixer with 3-way diverter (Aquamax Series) including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work.

S&F of 15 mm CP finish brass body wall mixer conforming toof jaguar make model no FLR-CHR-5273UPR IS 8931 with centre distance 150 mm and provision for over head shower including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work.

S & F of 15mm CP finish brass body Spout With Button Attachment For Hand Shower With Wall Flange including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work.

S & F of Hand Shower 100mm Round Shape Single Flow with Rubit Cleaning System including CP finishe Flexible Tube 12mm dia & 1.5M Long with Nuts along with Premium Wall Bracket including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work.

S & F of CP finish Maze Overhead Shower 200mm Round Shape Single Flow with Rubit Cleaning System including CP finish Shower Arm 600X25X25mm Square Shape for Ceiling Mounted Showers with Flange including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work.

S & F of 15mm dia CP finish brass body 2 Way Bib Cock with Wall Flange & Health Faucet with 8mm Dia 1.2 Meter Long Flexible Tube and Wall Hook including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work.

S&F Quartz kitchen sink of Hindware make Garnet series Black colour of size 370x200x90 or equivalent including HIndware make Pull down sink MIxer including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc. complete for finished item of work in all respects.

Supplying & Fixing white glazed Flat back Bowl urinals of Jaguar make model no URS-WHT-13253N fitted with Concelaed installation box for urinal sensor Jaguar make mnodel no SNR-CHR-51085C, Exposed part of Urinal sensor Jaguar make model no SNR-CHR-51085K and 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc. complete for finished item of work in all respects.

Supplying & Fixing Indian make below counter Rectangular Wash Hand Basin of size 480x4370x200 mm Jaguar make model no CNS-WHT-701, 32 mm nominal size C.P. waste coupling along with Bottle trap model no ALD-CHR-769L300X190 and fitted with Chromium Plated Single lever basin mixer Jaguar make model no OPP-CHR-15011BPM complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc. complete for finished item of work in all respects.

Supplying & Fixing Indian make below counter Wash Hand Basin of size 590x420x195 mm Jaguar make model no CNS-WHT-705 32 mm nominal size C.P. waste coupling along with Bottle trap model no ALD-CHR-769L300X190 and fitted with Chromium Plated Pillar tap of Jaguar make, model no OPP-CHR-15001PM complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc. complete for finished item of work in all respects.

Supplying & Fixing Indian make below counter Wash Hand Basin of size 590x420x195 mm Jaguar make model no CNS-WHT-705 32 mm nominal size C.P. waste coupling along with Bottle trap model no ALD-CHR-769L300X190 and fitted with Chromium Plated Single lever basin mixer Jaguar make model no OPP-CHR-15011BPM complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc. complete for finished item of work in all respects.

S&F Shower enclosure systems of Jaguar make made out of 8mm toughened glass, Chrome plated hardware, 2000-2400 mm wide, 2400mm height withh all accessories like door knob, floor clamp, glass connector, wall to glass hinges, glass edge, door wipe, magnetic strip

S&F Shower enclosure systems of Jaguar make made out of 8mm toughened glass, Chrome plated hardware, 2400-2800 mm wide, 2400mm height withh all accessories like door knob, floor clamp, glass connector, wall to glass hinges, glass edge, door wipe, magnetic strip

COMPUND WALL : Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. Footings

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING Under Footings

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cms thick consolidating each deposit layer with watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P and cost of overheads & contractors profit etc., complete for finished item of work for (APSS NO.309&310)

Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Footings

Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Columns

Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Plinth Beams

Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like TATA,SAIL,VSP, Jindal as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126)

Masonry work in CM(1:6) prop (Cement : Screened sand) with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, cost of overheads and contractors profit etc., complete for finished item of work. (APSS No. 501 & 504).

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) For External walls

Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Exterior Grade- 2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 3 Coats.

Painting to new iron works with 2 coats of Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over 1 coat of Red Oxide Primer Paint for iron works of Grade -1 of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site including cost of primer coat and all operational, incidental, labour charges etc. complete etc., complete including cost of overheads & contractors profit (APSS No.1200, 1207 & 1211) in all floors.

Supply and placing of Super Security Energizer 42ah, Exide battery 12V, solar panel with weather proof box,Siren for 2years warranty period etc complete for finished item of work.Comapny:Microsec as per Approved rate

Supply and placing of Galvanised iron High tension wire 2.59mm with Intermediate pole, End/Corner pole, support pole, insulators,S Hooks, Wire tighteners, joint clamps, Earthing kits for 2years warranty period etc complete for finished item of work. Company:Tata/Systematic as per Approved rate

ELEVATION: Supplying and fixing of aluminium semi unitized system Structural Glazzing for linear as well as cuvilinear portions of the building for all heights and all levels with extruded tubular Sections of size 93mm x 60mm x 2.5mm thick - Elevation

Supplying and fixing of aluminium semi unitized system Structural Glazzing for linear as well as cuvilinear portions of the building for all heights and all levels with extruded tubular Sections of size 74.5mm x 57mm x 2.25mm thick for frame as end mullion and transom - Elevation

Supplying and fixing of aluminium ventillators for linear as well as cuvilinear portions of the building for all heights and all levels with extruded tubular Sections of size 40 mm x 39.4mm x 1.25 mm thick for frame verticals and horizontals of the frames - Elevation

Providing, fabricating and installing Powder coated Aluminum Sliding system windows of 35mm series type with approved make all locations made out of Aluminum 2 Track profiles - Elevation

Providing, fabricating and installing Powder coated Aluminum Sliding windows of 27mm series type with approved make all locations made out of Aluminum 2 Track profiles with built in grooves. - Elevation

Supplying and fixing of aluminium ventillators for linear as well as cuvilinear portions of the building for all heights and all levels with extruded tubular Sections of size 40mm x 39.4 mm x 1.25 frame verticals and horizontals of the frames - Elevation

Supplying and fixing of aluminium ventillators for linear as well as cuvilinear portions of the building for all heights and all levels with extruded tubular Sections of size 50 mm x 45mm x 1.5 mm thick for frame verticals and horizontals of the frames - Elevation

Supplying and fixing of aluminium PARTITION along with providing a sylish door by using 74.5MM X 57MM PROFILES with 12mm clear toughened glass and H- Elevation

Supply and Fixing of Aluminium Composite Panel with Rustic/ Stone Finish Work by using 4MM Thick sheet with .25mm thick aluminium sheet on both sides along with 3mm core inside by using 25.4mm x 50.8mm x 1.5mm aluminium Extruded section as mullion and transom with 38.1mm x 25.4mm x 3.18mm connecting angle, screws, toggles, fasteners, etc.structural and weather silicone sealants, flashings, for water tightness all as per drawings or engineer incharge.etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges cost of base coat and overheads & contractors profit, complete for finished item of work - Elevation

Supplying and fixing of aluminium Rafters for vertical portions of the building for all heights and all levels with extruded tubular Sections of size 101.6mm x 44.75mm x 2.4 mm thick for frame as mullion and transom - Elevation

Providing Strucutral steel hollow Tubular sections conforming to IS 1161-2014 of all diameters, cutting and fabricating to required sizes and shapes,placing in position as per approved designs and drawings, including cost and conveyance of all structural steel sections and all wastages such as overlaps, couplings, welded joints, etc., and all operational, incidental charges, including Labour charges for fabricating all heavy steel works like Trusses,Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc and Labour charges for fixing Trusses, Stanchions, Heavy Beams and Girders erecting and fixing in position by using chain pulley blocks, Derek pole arrangements and cranes etc., including overheads and contractor's profit complete for finished item of work.

supply of anchor fastners wedge/expansion/sleeve type of material zinc plated carbon steel, hot dipped galvanized carbon steel,303 stainless steel or 316 stainless steel conforming to industry standards and diameter , anchor length of minimum 10mm dia and as per standard design of applications-for diameter 10mm

supply of aluminium annealed and anodized sections for doors,partitions,windows,ventilators(including anoxization cost) confirming to IS 11857-19986/aluminium plates,sheets & sections for form work and other industrial uses puposes (sub frames)

supply and fixing of 8mmthick cement board to the exizting MS structure by using necessary hardware and angles (cement board)

FURNITURE:- The office chair shall be designed for robust performance and exceptional ergonomic comfort in professional environments. It must feature a durable frame constructed from high-grade metal or engineered wood with a corrosion-resistant finish. The seating surface should include high-density foam cushioning upholstered in premium fabric or leatherette, with a contoured backrest and waterfall seat edge to promote proper posture and comfort. - Office Room Office chair - Ground Floor

The laminate finish table is designed for durability and aesthetic appeal, featuring a high-quality plywood or MDF core with a laminated surface for enhanced resistance to scratches and moisture. The table dimensions are customizable, typically ranging from 1200 mm (L) x 600 mm (W) x 750 mm (H), - Office Room Office Table -1 - Ground Floor

The veneer finish wardrobe is designed for durability and aesthetic appeal, featuring a high-quality plywood core with a veneered decorative finish for a refined look. The wardrobe dimensions are customizable, typically ranging from 1200 mm (L) x 600 mm (W) x 2100 mm (H), ensuring ample storage space. Office Room Storage - Ground Floor

The veneer finish storage unit is designed for durability and aesthetic appeal, featuring a high-quality plywood core with a veneered decorative finish for a refined look. The unit dimensions are customizable, typically ranging from 900 mm (L) x 450 mm (W) x 1800 mm (H), ensuring ample storage capacity. The veneer finish is crafted from IS 1328-compliant decorative plywood, offering enhanced resistance to wear and tear. - PA Cabin Storage - Ground Floor

The office chair shall be designed for robust performance and exceptional ergonomic comfort in professional environments. It must feature a durable frame constructed from high-grade metal or engineered wood with a corrosion-resistant finish. The seating surface should include high-density foam cushioning upholstered in premium fabric or leatherette, with a contoured backrest and waterfall seat edge to promote proper posture and comfort. - PA Cabin Office Chair - Ground Floor

side table for beds is designed for durability and functionality, featuring a high-quality plywood or metal frame with a laminated or powder-coated finish for enhanced longevity. The table dimensions are customizable, typically ranging from 450 mm (L) x 400 mm (W) x 500 mm (H), Office Room -Ground Floor

solid wood frame with high-density foam cushioning for superior support. The upholstery is available in premium fabric or leatherette (minimum 220 GSM) for a refined finish. The sofa dimensions are 1770 mm (L) x 845 mm (W) x 810 mm (H), - Waiting Area - Seater Sofa -Ground Floor

The conference room office chair features an ergonomic design with lumbar support to ensure extended comfort during prolonged meetings. Its seat and backrest are crafted with high-density polyurethane foam upholstered in durable fabric (minimum 220 GSM), - Video Conference - Premium Chair - Ground Floor

TABLE(5'0''X20'0'') - The work top to be 25mm thick E 1 particle board finished with 1mm thk. low pressure laminate. In approved White shade laminate & 2mm thick PVC edge binding matching to laminate. - Video Conference Table - Ground Floor

A standard projector and screen setup is designed for high-quality visual presentations, featuring a multimedia projector with LCD technology and a minimum resolution of 1920 x 1200 (WUXGA) for sharp image clarity. The projector offers 5300 ANSI Lumens brightness, ensuring visibility in various lighting conditions, and a contrast ratio of 2,500,000:1 - Video Conference Screen and Projector -Ground Floor

Luxury chair is designed for executive comfort and durability, featuring a high-quality plywood frame with a veneer or leatherette finish for a premium look. The seat and backrest are made of high-density polyurethane foam, upholstered in luxury fabric or genuine leather (minimum 220 GSM) - Office Room - 2 Luxury Office Chair -Ground Floor

The laminate finish table is designed for durability and aesthetic appeal, featuring a high-quality plywood or MDF core with a laminated surface for enhanced resistance to scratches and moisture. The table dimensions are customizable, typically ranging from 1200 mm (L) x 600 mm (W) x 750 mm (H), - Office Room - 2 Table - Ground Floor

solid wood frame with high-density foam cushioning for superior support. The upholstery is available in premium fabric or leatherette (minimum 220 GSM) for a refined finish. The sofa dimensions are 1770 mm (L) x 845 mm (W) x 810 mm (H), - - Office Room &waiting area ground floor

The wooden high arm chair is designed for durability and ergonomic comfort, featuring a plywood frame with a veneered decorative finish for a refined look. The seat and backrest are made of high-density polyurethane foam, upholstered in premium fabric or leatherette (minimum 220 GSM) - Arm Chair -Ground Floor

plywood veneer finish wall panel is designed for durability and aesthetic appeal, featuring a high-quality plywood core with a veneered decorative finish for a refined look. The panel dimensions are customizable, typically ranging from 1200 mm (L) x 2400 mm (H) x 12 mm (T), - Wall Panelling -First Floor Living Area

The veneer finish wardrobe is designed for durability and aesthetic appeal, featuring a high-quality plywood core with a veneered decorative finish for a refined look. The wardrobe dimensions are customizable, typically ranging from 1200 mm (L) x 600 mm (W) x 2100 mm (H),- Master bed Room - Sliding Wardrobe - First Floor

solid wood frame with high-density foam cushioning for superior support. The upholstery is available in premium fabric or leatherette (minimum 220 GSM) for a refined finish. The sofa dimensions are 1770 mm (L) x 845 mm (W) x 810 mm (H), Living Hall & Bed Room- 3 Seater sofa - First Floor

single-seater sofa is designed for durability and comfort, featuring a solid wood frame with high-density foam cushioning for superior support. The upholstery is available in premium fabric or leatherette (minimum 220 GSM) for a refined finish. The sofa dimensions are 900 mm (L) x 850 mm (W) x 810 mm (H), -Living Hall - Single Seater sofa - First Floor

side table for beds is designed for durability and functionality, featuring a high-quality plywood or metal frame with a laminated or powder-coated finish for enhanced longevity. The table dimensions are customizable, typically ranging from 450 mm (L) x 400 mm (W) x 500 mm (H), -Side Table -First Floor

The laminate finish table is designed for durability and aesthetic appeal, featuring a high-quality plywood or MDF core with a laminated surface for enhanced resistance to scratches and moisture. The table dimensions are customizable, typically ranging from 1200 mm (L) x 600 mm (W) x 750 mm (H), - 2 Table - First Floor

The plywood veneer finish box bed is designed for durability and functionality, featuring a high-quality plywood frame with a veneered decorative finish for a refined look. The bed dimensions are 2000 mm (L) x 900 mm (W) x 500 mm (H), -Bed Room -2 - First Floor

The wooden high arm chair is designed for durability and ergonomic comfort, featuring a plywood frame with a veneered decorative finish for a refined look. The seat and backrest are made of high-density polyurethane foam, upholstered in premium fabric or leatherette (minimum 220 GSM) f -2 - Arm Chair - First Floor

plywood veneer finish wall panel is designed for durability and aesthetic appeal, featuring a high-quality plywood core with a veneered decorative finish for a refined look. The panel dimensions are customizable, typically ranging from 1200 mm (L) x 2400 mm (H) x 12 mm (T), - Master Bed Room - 2Wall Paneling - First Floor

The veneer finish storage unit is designed for durability and aesthetic appeal, featuring a high-quality plywood core with a veneered decorative finish for a refined look. The unit dimensions are customizable, typically ranging from 900 mm (L) x 450 mm (W) x 1800 mm (H), - Kitchen Storage -Kitchen Storage - First Floor

The veneer finish storage unit is designed for durability and aesthetic appeal, featuring a high-quality plywood core with a veneered decorative finish for a refined look. The unit dimensions are customizable, typically ranging from 900 mm (L) x 450 mm (W) x 1800 mm (H), - S Kitchen Storage - Frist Floor

plywood veneer finish wall panel is designed for durability and aesthetic appeal, featuring a high-quality plywood core with a veneered decorative finish for a refined look. The panel dimensions are customizable, typically ranging from 1200 mm (L) x 2400 mm (H) x 12 mm (T), - Bed Room -2 - Wall Panelling -First Floor

The dining room chair featuring an ergonomic structure with a contoured backrest for optimal support. The seat and backrest are made of high-density polyurethane foam upholstered in premium fabric (minimum 220 GSM) A minimum warranty of 1 year ensures reliability and long-term use -Dining Room Premium Chairs - Frist Floor

The dining table designed for durability and functionality, featuring a stainless steel frame (SS 304 grade) with a granite top for a premium finish. The table dimensions are 40”L x 33”B x 29”H, with a black granite top measuring 48”L x 36”B x 18mm thickness. - -Dining Room - 12 Seater Table - First Floor

plywood veneer finish wall panel is designed for durability and aesthetic appeal, featuring a high-quality plywood core with a veneered decorative finish for a refined look. The panel dimensions are customizable, typically ranging from 1200 mm (L) x 2400 mm (H) x 12 mm (T), - Office Room - Wall Panelling -Ground Floor

The plywood veneer finish box bed is designed for durability and functionality, featuring a high-quality plywood frame with a veneered decorative finish for a refined look. The bed dimensions are 2000 mm (L) x 900 mm (W) x 500 mm (H), - Master Bed Bed Room - First Floor

The veneer finish wardrobe is designed for durability and aesthetic appeal, featuring a high-quality plywood core with a veneered decorative finish for a refined look. The wardrobe dimensions are customizable, typically ranging from 1200 mm (L) x 600 mm(W) x 2100 mm (H), - Bed Room -2 Sliding Wardrobe

The laminate finish table is designed for durability and aesthetic appeal, featuring a high-quality plywood or MDF core with a laminated surface for enhanced resistance to scratches and moisture. The table dimensions are customizable, typically ranging from 1200 mm (L) x 600 mm (W) x 750 mm (H), ensuring ample workspace. The laminate finish is 1 mm thick, compliant with industry standards for longevity and wear resistance. The tabletop is treated with melamine or polyurethane coating for additional durability. The frame is reinforced for high load-bearing capacity, while the legs are made of powder-coated metal for stability. The table includes soft-close drawers and integrated cable management for functionality. A minimum 1-year warranty ensures reliability, making it suitable for commercial and institutional settings.

The laminate finish table is designed for durability and aesthetic appeal, featuring a high-quality plywood or MDF core with a laminated surface for enhanced resistance to scratches and moisture. The table dimensions are customizable, typically ranging from 1200 mm (L) x 600 mm (W) x 750 mm (H), -Study Table - First Floor

The veneer finish storage unit is designed for durability and aesthetic appeal, featuring a high-quality plywood core with a veneered decorative finish for a refined look. The unit dimensions are customizable, typically ranging from 900 mm (L) x 450 mm (W) x 1800 mm (H), - Pantry Storage and All other Book Shelfs and Storage Units - First floor

Providing mattresses of Sleepwell Nexa Luxury series of 10" thickness with Pro Nexa Foam, Quiltec Foam, with acuprofile support layer, ingenious contouring technology with 3-zoned Resitec profiling breathability with even pressure distribution, anti skid bottom fabric, engineered side wall technology complete for finished item of work (83X78X10)

Providing mattresses of Sleepwell Nexa Luxury series of 10" thickness with Pro Nexa Foam, Quiltec Foam, with acuprofile support layer, ingenious contouring technology with 3-zoned Resitec profiling breathability with even pressure distribution, anti skid bottom fabric, engineered side wall technology complete for finished item of work (83X72X10)

SUPPLY AND FIXING OF 18MM PLYWOOD CURTAIN PELMENT BY USING MS BRACKETS AND ALUMINIUM CHANNELS ALONG WITH NECESSARY HARDWARE ETC. including overhead and contractors profit complete for finished item of work

Providing and installing built in Hob of KAFF make Ashford series model no ASF 784,4 full brass high efffeciency burner with full FFD of size 780 mm 8 mm thick black tempered glass, with Auto electric and wall mountable chimney KAFF make LYNN series of size900mm with Gesture motionwith 8 speed levels, Booster, Automatic open glass panel, Dry heat auto clean technolog with 220 W BLDC motor of 1600 m3/h suction, Premium Black Tempered Glass Finish with one year warranty complete for finished item of work

plywood veneer finish wall panel is designed for durability and aesthetic appeal, featuring a high-quality plywood core with a veneered decorative finish for a refined look. The panel dimensions are customizable, typically ranging from 1200 mm (L) x 2400 mm (H) x 12 mm (T), - - LIFT - Wall Panelling - GF,FF

plywood veneer finish wall panel is designed for durability and aesthetic appeal, featuring a high-quality plywood core with a veneered decorative finish for a refined look. The panel dimensions are customizable, typically ranging from 1200 mm (L) x 2400 mm (H) x 12 mm (T), - Dressing Mirror Wall Panelling - First Floor

ELECTRICAL INSTALLATION : Supply and Laying of ISI 25mm outer dia heavy grade IS:9537 part 3 rigid PVC pipe concealed in Roof Slabs with all required PVC Deep Boxes including labour charges etc., complete. Makes : Sudhakar / Modi / VIP / Precision

Supply and laying of ISI 25mm outer dia medium grade with IS:9537 part 3 rigid PVC pipe consealed in wall with PVC junction boxes and all required accessories including masonary work for light, fan and separate plug point with including all labour charges etc., complete. Makes : Sudhakar / Modi / VIP / Precision

Supply and laying of ISI 25mm outer dia medium grade with IS:9537 part 3 rigid PVC pipe consealed in wall with all required PVC Junction Boxes including masonary work and labour charges etc., complete for Run of mains. Makes : Sudhakar / Modi / VIP / Precision

Wiring with run of 2 of 1.5 Sqmm Class-II Conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable make in existing consealed pipe, ferrules including supply and fixing of 3 Plate Jumbo Ceiling rose/batten holder and 6A/10A ISI marked Modular type switch including cost and conveyance of all material and all labour charges etc., complete for light and bell points in N.R.B. Wire Makes : Finolex / RR Kabel / Havells. Makes of Modular box and Switches:Legrand Lyncus/GM Four Five/Gold Medal Curve/Anchor Roma Plus/Crabtree Verona/Panasonic Vision

Wiring with run of 2 of 1.5 Sqmm Class-II Conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable in existing PVC conduit pipe,Ferrules including Supply and fixing of Jumbo Ceiling rose and 6A/10A ISI Mark 2way Modular switch with required modular box and cover frame in existing Surface or Concealed pipe wiring,ferrules including cost and conveyance of all material and all labour charges etc., complete for Stair case points in N.R.B. Wire Makes : Finolex / RR Kabel / Havells. Makes of Modular box and Switches:Legrand Lyncus/GM Four Five/Gold Medal Curve/Anchor Roma Plus/Crabtree Verona/Panasonic Vision

Wiring with run of 3 of 1.5 Sqmm Class-II Conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable make in existing consealed pipe,ferrules including supply and fixing of 3 Plate Jumbo Ceiling rose of Anchor / Gold Medal Olive / Million Zoom make and 6A/10A ISI marked Modular type switch, modular box and cover frame including cost and conveyance of all material and all labour charges etc., complete for fan and exhaust fan points in N.R.B. Wire Makes : Finolex / RR Kabel / Havells. Makes of Modular box and Switches:Legrand Lyncus/GM Four Five/Gold Medal Curve/Anchor Roma Plus/Crabtree Verona/Panasonic Vision

Supply and fixing of ISI Marked 10A 3 Pin 2 Module Modular Socket with shutter with 6A/10A 1way Modular switch , 3 module box with cover frame in common switch board including cost and conveyance of all materials and all labour charges etc., complete in N.R.B. / R.B. Makes of Modular box and Switches:Legrand Lyncus/GM Four Five/Gold Medal Curve/Anchor Roma Plus/Crabtree Verona/Panasonic Vision

Supply and fixing of ISI marked 16A/6A 1 way Combi Socket Modular Socket with shutter, 16A / 20A 1 Way 1 Module Modular Switch on a 3 Modular box with suitable cover frame with connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. / R.B. Makes of Modular box and Switches:Legrand Lyncus/GM Four Five/Gold Medal Curve/Anchor Roma Plus/Crabtree Verona/Panasonic Vision

Supply and fixing of ISI marked 3 Nos 10A Modular type switches, 3Nos 10A 3 Pin 2 Module Modular Socket with shutter on 9 Modular box with cover frame including connections, cost and coveyance of all material and all labour charges etc., complete for Computers in N.R.B. / R.B. Makes of Modular box and Switches:Legrand Lyncus/GM Four Five/Gold Medal Curve/Anchor Roma Plus/Crabtree Verona/Panasonic Vision

Supply and Run of 3 of 2.5 Sqmm Class-II Conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable. in existing pipe for run of mains inlcuding connections and all labour charges etc., complete. Wire Makes : Finolex / RR Kabel / Havells.

Supply and Run of 3 of 4.0 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable in existing pipe for run of mains inlcuding connections and all labour charges etc., complete. Wire Makes : Finolex / RR Kabel / Havells.

Supply and Run of 3 of 6.0 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable in existing pipe for run of mains inlcuding connections and all labour charges etc., complete. Wire Makes : Finolex / RR Kabel / Havells.

Supply and Run of 5 of 6.0 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete.

Supply and Run of 5 of 10.0 Sqmm FRLSH / HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete. Wire Makes : Finolex / RR Kabel / Havells.

Supply, transportation and fixing of 12 W +/-10% (>= 1200 Lumens) back lit LED Down Light Recessed / Surface mounting round / square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE : Phillips / Wipro / Crompton / Havells / Jaquar / Panasonic LED MAKE : PHILIPS LUMILEDS / CREE /NICHIA / OSRAM /SAMSUNG / LG LEDs.

Supply, transportation and Fixing of 22W, +/- 10% , >/ 2300 lumens, 1200mm +/- 10% length LED light housing made with alluminium anodised body, wide operating voltage with PF≥0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department as per IS, minimum CRI≥80 etc., complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE : Phillips / Wipro / Crompton / Havells / Jaquar / Panasonic LED MAKE : PHILIPS LUMILEDS / CREE /NICHIA / OSRAM /SAMSUNG / LG LEDs.

Supply, Transportation and fixing of energy efficient fan consuming 40W, 1200 mm sweep, aluminium body, BEE 5 star rated decorative ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3 no's aerodynamically designed blades, 30 cm long down rod, 2 no's canopies, shackle'kit, safety rope, copper winding, Power Factor greater than 0.90, Service Value (CMMAV) greater than 8.5, Air delivery minimum 245 CMM, 280 RPM ( tolerance as per IS:374-2019), THD less than 10%. with remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete. Makes : Havells Stealth

Supply, Transportation and Fixing of 10" (250mm) BLDC exhaust fan with necessary accessories etc., complete and all labour charges etc., complete. Makes : Atomberg / Crompton / Havells / Orient. Twin Core Wire Makes: Finolex / RR kabel / Havells.

Supply and fixing of GI louver shutter including GI mesh to avoid birds entry with necessary materials suitable for Exhaust fan.

Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe gig earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete. (1.18Kgs/1Mtr)

Supply and Run of No.8 SWG G.I wire including cost of all accessories and labour charges etc., complete. (0.104Kgs/1Mtr)

Supply and fixing of 8 Way SPN DB with IP 43, Protection as per IS:13032 and suitable for 1 No 40A DP Isolator and and 4 Nos 6-32 A 10kA ISI Marked C/D curve SP MCBs with 100 A tinned copper busbar, neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar, din bars and detachable gland plate etc complete with including all 'connections and labour charges for Flush Mounting etc., complete. DB Makes :Legrand. Isolator Makes : Legrand-DX3 / Schneider-Acti9. MCB Makes : Legrand-DX3 / Schneider-Acti9.

Supply and fixing 4 Way TPN DB Horizontal with IP 43 Protection as per IS:13032 and suitable for 1 No 4 pole Incomer of 40A FP Isolator and 12Nos. 6-32A 10kA ISI Marked C/D Curve SP MCBs with 100 A tinned copper busbar, neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar, profile blanking modules for unused MCB ways, din bars and detachable gland plate etc complete with inter connections and labour charges for Flush Mounting etc., complete. DB Makes :Legrand. Isolator Makes : Legrand-DX3 / Schneider-Acti9. MCB Makes : Legrand-DX3 / Schneider-Acti9.

Supply and fixing of 8 way VTPN DB IP 43 Protection as per IS:13032 With and suitable for 1 No 125A 4 pole 25 kA MCCB Incomer and 8 Nos 63A 10 kA ISI Marked C/D curveTP MCBs with 100 A tinned copper busbar, neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar, profile blanking modules for unused MCB ways, din bars and detachable gland plate etc complete with inter Connections and labour charges for Flush Mounting etc., complete. including alll connections and labour charges for Flush Mounting etc., complete. DB Makes :Legrand. MCCB Make : Schneider-NSNSX/Legrand-DPX3. MCB Makes : Legrand-DX3 / Schneider-Acti9.

"Supply and fixing of DB with 1 No 20A single phase plug and Socket, in sheet steel enclosure with 1 No 10A to 20A 10 KA ISI Marked C/D curveSP MCB including internal connection and labour charges for Flush Mounting etc., complete. DB Makes : Legrand. Legrand-DX3 / Schneider-Acti9.

Supply and Run of LAN Cable cat - 6 UTP cable of makes D Link / AMP / Molex / Legrand / Krone / Finolex / Polycab in existing pipe inlcuding all labour charges etc., complete as desired by the department (derived from Sd 3.1.2) Makes: D Link / AMP / Molex / Legrand /Krone.

Supply and fixing of Cat 6 RJ-45 information outlets including duel face plate of makes D Link / AMP / Molex / Legrand / Krone on required size Modular Box with cover frame with connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. Makes: D Link / AMP / Molex / Legrand /Krone.

Supply and run of 2 Pair, 0.5mm telephone copper wire in existing pipe inlcuding all labour charges etc., complete. Makes: Gold Medal / Million / Finolex / Surabi / Polycab.

Supply and laying of 20 pair telephone wire 0.5mm copper in the existing metallic/non metallic conduit pipe with connections etc.,completeTelephone wire. Makes: Finolex / Delton / Surabi / Polycab .

Supply of 20 pair Telephone distribution box with back mount frame, krone connector, powder coated metal body with lock and key arrangement

Supply and fixing of Modular telephone Jack with connector on modular box with cover frame in existing surface / consealed pipe wiring including cost and coveyance of all material and all labour charges etc., complete in N.R.B. / R.B. Makes of Modular box and Switches:Legrand Lyncus/GM Four Five/Gold Medal Curve/Anchor Roma Plus/Crabtree Verona/Panasonic Vision

Supply, Installation, Testing and Commissioning of 24 Port, 4 GIGA fibre slots (SFP), power budget 250 W 10 / 100 / 1000 Gigabit PoE switchwith GIGA fibre slots (SFP). Makes : Digisol / TP Link / D link

Supply and fixing of 24 port patch panels with IO separate including accessories and all labour charges etc complete. Makes : Digisol / D link / Legrand / TP Link

Supply and installation of 9U wall 600 mm width x 500 mm depth UL certified wall mounting net work rack with sheet steel revited metal frame,top and bottom cover with brush cable entry,confirming to following standards IEC 60529,EN 60529 ( IP 20), IEC 62262 EN 62622 (IK08) , DIN 41494, EIA 310, IEC 60927 including all accessories like horizontal PDU, metal cable manager, hardware packet and the cantilever shelf etc.,complete Makes : Vall rack (Legrand) / Netrack

Supply of 70 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I). Makes : Polycab / Havells KEI / Finolex

Supply of 50 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I). Makes : Polycab / Havells KEI / Finolex

Earth work excavation of Trench in hard ground soil and Sand filling shall be provided at the bottom of trench before laying the cable and laying of U.G cables up to 95 sqmm covering the cable with back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete.

Labour charges for run of U.G cable on wall / existing pipe/tray with necessary fixing arrangments such as saddles, clamps,wooden separators etc., (as directed by departmental official) for the cables.

LT CABLE TERMINATIONS Supply and fixing of heavy duty type double compression weather proof type brass cable glands duly nickel plated as per BS 6121 and IP66 complete with brass checknut, outer sheath sealing gasket suitable for 70 Sqmm 4.0 core XLPE insulated armoured cable etc complete. Makes: SMI / Commet / Dowels.

Supply and fixing of heavy duty type double compression weather proof type brass cable glands duly nickel plated as per BS 6121 and IP66 complete with brass checknut, outer sheath sealing gasket suitable for 50 Sqmm 3.5 core XLPE insulated armoured cable etc complete. Makes: SMI / Commet / Dowels.

Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 70Sqmm cable etc complete with nuts, bolts and washers Makes: DMI / Jainson / Dowels or equivalent make as approved by the department

Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 50Sqmm cable etc complete with nuts, bolts and washers Makes: DMI / Jainson / Dowels or equivalent make as approved by the department

Supply, transportation and fixing of 60/65W +/-10% (>=6500 Lumens) LED Street light Body made of high grade pressure die – cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover / temperature protective custom molded polycarbonate diffuser, Thermal shock and impact resistant IK07 fixed to the housing by SS screws Suitable lense on LEDs, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >120 lumens / watt, with Ingress protection IP66, BIS approved Potted driver, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates. PHILIPS / CROMPTON / Wipro / Jaquar / Halonix / HAVELLS LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.

Street lights Supply and transportation of 3.00 Mtrs height Spiral pole with specifiactions of Bottom: 1.50 Mtr x 114.30mm OD x 3mm, Middle: 1.00 Mtr x 88.90mm OD x 3mm, Top: 0.50 Mtr x 76.10mm OD x 3mm thickness Base plate: 200x200x12mm PCD: 200, Finishing: Hot dip galvanised Powder coating of steel grey colour, M16 Foundation bolts, MCB connector etc., complete. Make: Candilier.

Foundation and erection charges with special T&P, for 3.00 Mtrs long Octagonal / Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtr x 0.45Mtrs x 0.75 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement as directed by the field engineers during execution including all labour charges and cost and conveyance of materials etc. complete.

"Supply transportation and fixing of 40W decorative Post top LED luminaire for 3600 indirect light resistent to impact and corrossion, glare-free and better uniformity with IP 65 protection Makes : CROMPTON make model no. LPTO-40-CDL / M or its equivalent make "

Supply and Transportation of Outer dia 50mm and Inner dia 38mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II with all cessories like couplers, bends, end caps, Ts etc., complete Makes: DURA LINE (Dura Guard) / Bajaj / Gamson / Ultra Plus / CPE

UPS Supply, Transportation and installation of 5 KVA, 192/240V DC on line UPS system IGBT based rectifier with input power factor correction with isolation transformers double conversion, SNMP controls, LCD display, Pure sine wave out put, with auto static switch three phase input / Single phase output with warranty up to three years. Makes: APC / Numeric / Emerson

Supply of 12V 65 AH SMF battery including wire leads Makes : Quanta / Racket / Exide / Amaron.

Supply and providing of UPS cum battery rack 11 to 20 batteries

Sub estimate : Providing Air Conditioning Supply, Transportation, Installation, Testing and Commissioning of 8HP Variable refrigerant Volume (VRV) / variable refrigerant flow (VRF) Air Cooled Outdoor Units (ODU) suitable for cooling and heating having 100% thermetically sealed inverter type compressor and minimum 2 compressors along with 2 condensing fans above 14 / 18 HP Modules, Microprocessor based controller, Side / Top Discharge type condensing units with R-410 A refrigerant, vibration isolators with suitable foundation etc., complete as required. The outdoor unit shall deliver the rated capacity at AHRI conditions and work even at 50 ° centigrade ambient temperature without tripping. The unit shall be suitable to work on 430 V +/- 10%, 3 phase 50 Hz AC Power supply etc., complete finished item of work including comprehensive maintenance of units during the defect liability period. Makes: Blue star / Hitachi / Daikin/ Mitsubishi Electric or equivalent models approved by the Engineer-in- Charge.

Supply, Transportation, Installation, Testing and Commissioning of 10HP Variable refrigerant Volume (VRV) / variable refrigerant flow (VRF) Air Cooled Outdoor Units (ODU) suitable for cooling and heating having 100% thermetically sealed inverter type compressor and minimum 2 compressors along with 2 condensing fans above 14 / 18 HP Modules, Microprocessor based controller, Side / Top Discharge type condensing units with R-410 A refrigerant, vibration isolators with suitable foundation etc., complete as required. The outdoor unit shall deliver the rated capacity at AHRI conditions and work even at 50 ° centigrade ambient temperature without tripping. The unit shall be suitable to work on 430 V +/- 10%, 3 phase 50 Hz AC Power supply etc., complete finished item of work including comprehensive maintenance of units during the defect liability period. Makes: Blue star / Hitachi / Daikin/ Mitsubishi Electric or equivalent models approved by the Engineer-in- Charge.

Supply and Transportation of 1.6 TR nominal capacity 1way- Cassette type VRV / VRF IDU. The units shall be powder coated galvanized steel housing equipped with pre filter, fan section, coil section, with inbuilt Condensate drain pump kit, etc. The body shall be light in weight and shall be able to suspend from four corners. The fan shall be mounted directly on motor shaft having supported from housing, statically and dynamically balanced and direct driven type. This shoud includes required size of accoustically treated plenums with outlet collars with dampers , fire retarded flexible connections, etc including remote control with suitable angle frame and painting to the supports etc for finished item of work including comprehensive maintenance of units during the defect liability period. Makes: Blue star / Hitachi / Daikin/ Mitsubishi Electric or equivalent models approved by the Engineer-in- Charge.

Supply and Transportation of 2.0 TR nominal capacity 1way- Cassette type VRV / VRF IDU. The units shall be powder coated galvanized steel housing equipped with pre filter, fan section, coil section, with inbuilt Condensate drain pump kit, etc. The body shall be light in weight and shall be able to suspend from four corners. The fan shall be mounted directly on motor shaft having supported from housing, statically and dynamically balanced and direct driven type. This shoud includes required size of accoustically treated plenums with outlet collars with dampers , fire retarded flexible connections, etc including remote control with suitable angle frame and painting to the supports etc for finished item of work including comprehensive maintenance of units during the defect liability period. Makes: Blue star / Hitachi / Daikin/ Mitsubishi Electric or equivalent models approved by the Engineer-in- Charge.

Supply and Transportation of 2.0 TR nominal capacity 4way- Cassette type VRV / VRF IDU. The units shall be powder coated galvanized steel housing equipped with pre filter, fan section, coil section, with inbuilt Condensate drain pump kit, etc. The body shall be light in weight and shall be able to suspend from four corners. The fan shall be mounted directly on motor shaft having supported from housing, statically and dynamically balanced and direct driven type. This shoud include required size of accoustically treated plenums with outlet collars with dampers , fire retarded flexible connections, etc including remote control with suitable angle frame and painting to the supports etc for finished item of work including comprehensive maintenance of units during the defect liability period. Makes: Blue star / Hitachi / Daikin/ Mitsubishi Electric or equivalent models approved by the Engineer-in- Charge.

Supply, installation, testing and commisioning of 2 runs of following sizes of all refregerent liquid and gas piping using eddy current free hard copper pipes and fittings like elbows, couplers, T - joints, Brass fittings "U" loops, expantion loops, refnet joints etc, for VRV / VRF System. Insulation of pipes using 19mm for supply and 13mm returns thick elastometric closed cell nitrile rubber insulation materials having class "O" for fire properties structural clamps with hard PVC pipes sleevss under the clamp to protect insulation at supports tagging to enable tracing connectivity to respective units as per drawings to be generated by the agency submission of test reports in approved format forms a part of this item scope, making up of any leakages including supply, labour, consumables, refrigerant top up and incidental expenses. Makes : Mandev / or Equivalent as approved by the department a)12.7 X 28.6mm b)15.9 X 28.6mm c)19.1 X 34.9mm d)19.1 X 41.3mm e)22.2 X 41.3mm

Installation of Cassette type Split Air Conditioners.

Supply and run of 1.5 Sqmm 2 Core PVC Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade upto 1100 Volts as per IS:694:2010 including all transportation charges etc complete.Makes : Finolex / RR kabel / Havells / Polycab/ Nakoda / Gloster

Supply, transportation and installation of Hot- Dip GI floor mounting support stands for VRF outdoor units (positioned on Terrace or floor level), as per the standards with all necessary components, etc (Big Foot System) Upto and below 12 HP

Pressure testing and commissioning of total VRV System with required Gas charging etc complete 18HP

Supply, Testing and installation of Drain pipe with CPVC pipes with all accessories and insulation with 6mm thick closed cell nitrile rubber of the following sizes, with all required accessories Makes : Astral / Ashirvad or equivalent approved by the department 32mm

Supply, Testing and installation of Drain pipe with CPVC pipes with all accessories and insulation with 6mm thick closed cell nitrile rubber of the following sizes, with all required accessories Makes : Astral / Ashirvad or equivalent approved by the department 25mm

Lifting, shifting of unit to terrace, installation,testing &commissioning of VRV / VRF outdoor units of the following capacities with required supports with necessary bolts, screws and nut etc complete upto 7th floor 8 HP

Lifting, shifting of unit to terrace, installation,testing &commissioning of VRV / VRF outdoor units of the following capacities with required supports with necessary bolts, screws and nut etc complete upto 7th floor 10 HP

CCTV SECURITY SYSTEM Supply and laying of 6 Core (Indoor / Out door), Single mode armourd, Optic fibre cable. Makes:D Link/AMP/Molex/Legrand/Krone

Supply, Installation, Testing and Comissioning of 2MP Bullet camera 1/2.8'' CMOS progressive sensor, min. illumination 0.006 Lux F1.6 (color), 0 Lux B/w, 50dB S/N ratio; 1/8 ~1/32000 shutter speed, IR distance - 60Mtr or better, 120 dB or better WDR, triple stream;Protocal: IPv4, TLS,DHCP,IPv6, TCP / IP, HTTP, SMTP,UDP,HTTPS, RTSP / RTP / RTCP,DNS,SNMP, IGMP / Multicast, NTP, QoS, 802.1X, ICMP, ARP; Motion Detecton, People counting, Intrusion, Loitering, SMD, Tampering; local storage: up to 256Gb; Alarm IN & Outputs, Audio IN & Out; ONVIF-S/G/T; Security: HTTPS,Digest authentication, User account and password protection,TLS1.2 only, Stream encryption, AES128/ Telnet closed, IP Filter,PCI-DSS compliance; IP67,IK10, UL,CE,FCC, NDAA Compliant Approved Makes: BOSCH /HONEYWELL / MOBOTIX/ AXIS (Agency should submit the authorisation to be submitted for future maintenance and guarantee )

Supply, Installation, Testing and Commissioning of 16CH Embedded 4K NVR 2 SATA expandable up to 20TB, audio input & Output, Two way communication supported, G7.11 audio format support, Min. 120Gb recording throughput, 4 alarm inputs & 2 Outputs, RS485, Esata and RS232 to be supported with max. 16 users, Op. temp -10 to 50 deg. C, NDAA compliant, UL/CE/FCC certified. Approved Makes: BOSCH /HONEYWELL / MOBOTIX/ AXIS

Supply and installation of Surveillance 6TB Hard Disk Make : WD/ Seagate

Supply, Installation, Testing and Commissioning of 16 port Gigabyte POE switch , 1-16 port:Default:10/100/1000 Mbps , CCTV Mode:10Mbps; UPLINK:1000Mbps , IEEE 802.3/802.3u/802.3af/at , Backplane Bandwidth 8.8G , Additional 2 Uplink ports , On Surveillance mode support 250m distance. Make : D-Link /CISCO/DIGSOL

Supply & Fixing of 55 inch LED monitor 4K smart commercial display unit with VGA HDMI, USB ports. Panel Type LCD, Aspect Ration 16:9, Resolution 3480 x 2160, Brightness 350 nits, Contrast ration 4000:1, Response time 8ms Approved Make : Samsung/ LG

Supply of unloaded 24 port patch panel with IO separate Makes : Digisol / TP Link / D link. / Legrand

Supply of 16 Port 10 / 100 / 1000 Gigabit Unmanageable Ethernet switch. Makes : TP Link / D link / Netfox.

Supply Installation and Testing and Commissioning of Patch Cord 1Mtr Makes:DLINK/AMP/Molex/Legrand/Krone

Supply and installation of 6U Wall 600 mm width x 500 mm depth UL certified wall mounting net work rack with sheet steel revited metal frame, top and bottom cover with brush cable entry, confirming to following standards IEC 60529, EN 60529 ( IP 20), IEC 62262 EN 62622 (IK 08) , DIN 41494, EIA 310, IEC 60927 including all accessories like horizontal PDU, metal cable manager, hardware packet and the cantilever shelf etc., complete. Makes : Vallrack (Legrand) / Netrack.

Supply & Installation of HDMI Cable cable low voltage grade as per standard specifications having 5 Mtr cord length with male and female 19 pin HDMI connectors as per requirement at site

Supply and Installation of Media Convereters

Supply and Installation of Optic Patch Cord of 2 Mtrs

Labour cost for splicing for each node or equivalent as approved by Department

DG Set Supply, Transportation, erection and commissioning (Excluding Foundation) of 3 Phase, 415, 50Hz, water cooled multi cylinder diesel generator set with alternator of 58.5 KVA out put continuous rating directly coupled Engine, Alternator and radiator with guard and mounted on a common base frame of Robust construction and complete with AMF control panel having IP-52 protection, anti vibration mounts of reputed make, Acoustic Enclosure as per CPCB norms , sound absorbing material to restrict sound level up to 75 dB up to 1 mtr distance and etc as per the following specifications mentioned A. Alternator : Kirloskar / Stamford / Crompton Greaves / Leroy Somer make. The alternator of the output rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM. The alternator is self excited, self regulated, and shall confirm to IS: 13364 of 1992 with regulation of +5% from no load to full load. degree of protections shall be IP21. B.Diesel Engine : Kirloskar / Cummins / Mahindra & Mahindra / Greaves Cotton Diesel Engine start, developing suitable ---BHP output at 1500 RPM with mechanical / electronic governing so as to enable the alternator to give 58.5-KVA continuous output at 0.8 P.F. lagging at NTP conditions. The diesel engine shall be capable of providing 10% O/L for 1 Hr for every 11 Hrs of continuous running at full load. The engine with 1st filling of oil and Diesel etc. 01. Exhaust pipe of required size as per the standards. 02. Diesel tank suitable for 8 to 12 Hours running capacity. 03. Residential Silencer. 04. SMF Batteries with leads as per the Manufacturer standards. C. AMF Control Panel:- AMF control panel shall be fabricated with 16SWG CRCA sheet shall be totally enclosed with dust and Vermin proof, floor mounted / wall mounted type and shall be comprising the following.01. Voltmeter with selector switch.02. 4 Pole MCCB incomer of 400A rating of Schenieder / LK make for EB and DG . 03. Ammeter with selector switch with CTs. 04. PF Meter and frequency Meter. 05. Indicator lamps (set Run, Load ON) with fuses. 06. KWH Meter of required rating. 07. Set of control fuses and current transformer. 08. Input Terminal board and output Terminal Board. 09. Battery charger with transformer rectifier unit. 10. Alternator supply air break contactor of LK make.11. Main supply air break contactor of LK make. 12. Audio Visual announciation .13. Main supply voltage set of control relays and timers with one mode selector switch, set of push buttons. 14.Control cable up to 15 Mtrs 2.5Sqmm 6 Core

LIFT Supply, transportation, installation, testing and commissioning of 8 passenger Gearless & Machine Room less elevator with following specifications with connected minor civil works required for installation of Lift including all accessories, scoffolding, requried channels, loading and unloading of materials etc,including comprehensive maintenance of lifts during the defect liability period. Makes: Schindler / Kone / OTIS / Mitsubishi or Equivalent Specifications: a)Type : Machine room less b)Pit Depth :1500 mm or as per NBC c) Minimum Floor to Floor Height (Required) : As per Standard d)Travel height : 3.6 to 4 mtrs approximately e)Head room Height : 4.5mtrs f)Lintel Height (Required) : 2240mm from finished floor level +/- 10% g)Number of persons : 8 P h)Rated Load : 544 Kgs i)Number of Stops : 2 j)Number of Access sides : 1 k)Floor Designations : G, 1, l)Drive Sytem : Alternating current, Voltage Frequency Drive (ACVF). m)Type of Controller : Fully collective control - Simplex / Duplex as per the site condition. n)Speed of Travel : 1 m/s o)Car size : As per Standard p)Door width : ≥800mm or As per Standard q)Door Height : 2000 mm or as per standard r)Rated output motor : as per standard s)Car Design : Car walls finish in Stainless stell hairline finish LED spot in ceiling. t)Car Doors : stainless steel hairline finish. Granite Flooring finish in Black sea. Deco ceiling finish in stainless steel Hairline. Full Height mirror on rear car panel.  u)Car Operating Panel : Mechanical push button.Door open/close and alarm buttons / Touch panel or equivalent, Visual call confirmation, Car position Indicator, announcing arrows for collective controls, Segment display automatic landing doors with stainless steel hairline finish. Center Opening as per the site condition. w)Special Features : Closed loop control system ,Self Diagnostic control ,Overload detection ,Automatic evacuation to nearest floor(ARD) ,Light curtain on car entrance,Alarm Horn ,Fire Switch ,Handrail in stainless steel finish on rear wall ,Auto Fan off ,Auto light off, Intercom-3way