Const. of Park near khod road in Khanpur under Municipal Council Pataudi Mandi

Amount

Const. of Park near khod road in Khanpur under Municipal Council Pataudi Mandi

Supply , Installation , testing and commissioning of Submersible motor and pump of 10 HP complete in all respect

Supply, Installation, Testing and commissioning of Submersible motor Starter of Bentex/Samrat/PSG or equivalent complete in all respect With entire satisfaction of Engineer-in charge

Earth filling with good earth brought from outside with avg. lead 10 km, including laying in 15cm in layers, watering and consolidating complete in all respect and fully satisfaction of Engineer-in-charge. (10 km lead) (Derived rate based on HSR 2021,HSR 3.1.2 plus 17.8.1 plus 17.8.2)

Supply and erection of 16 sqmm 4 core armoured cable on single arm pole/double arm pole/ high mast pole as required on various places complete in all respect upto entire satisfaction of engineer in charge

1. Air Swing:- Providing, designing and fixing of airs swinging pair of size 1150x900x1250 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00 mm thick all pipes made up of hot rolled tubular MS pipe and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and Base plate cover shall be made up of virgin LLDPEmanufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and UV resistant environmental friendly.Bearing used shall be maintained free, duly oiled sealed and selflubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GILLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in Charge regarding material, shape of equipment, colour on metal, Seat and base cover plate and fixing of equipment etc.

2. Pull Chair :_ Providing, designing and fixing of Pull pair of size 2500 X 800 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GILLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and I shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment colours on metal, seat and base cover plate and fixing of equipment etc

3. Twister :-Providing, designing and fixing Twister of size 1700 X1300 X 1300 mm fabricated 2`x4` rectangular hollow MS pipe and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zine primer paint to be applied at all welding points prior to finishing. Handlebars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer- in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE: caps for user safety. The equipment tobe fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Bridge Ladder :- Product type Playing Colour Your choise Size 10’feet Material Iron Customized Yes Age Group 8 to 20 Size 2.0 X2.0 X mtr/3.0 Mtr. All joint shell be lubricated made by reputed company and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped a necessary and dressed off removing sharp edges and burrsto be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GIALLDPE caps for user safely. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

5. SEE Saw :- Product type Playing Material Mild steel Size 6 Feet Age group up to 12 Seating 2 seater All Joint shall be lubricated made by reputed company and powder coated using Akzo or equipment of 80-120 micron thick. All welding joints of pipe are well welded with jointed scalloped a necessary and dressed off welded with joints scalloped a necessary and dressed off removing sharp edge and burrsto be approved by Engineer in charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPWE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cove nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer in Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

6. Double cross walker: Pipe –structure made of Apollo brand B Class GI. Pipe of 114mm OD 42mm OD and 32mm OD Connecting pipe- Made of Apollo Brand B Class GI. Pipe of 32OD Handle Frame- Made of Apollo Brand B Class GI. Pipe of 42OD Handle grip—Made of food Graded Rubber Bearing- ball bearing 6205zz Bearing Caps – Made up of HDPE material 60mm Seats- Made of HR sheet of 2mm Thickness Pole Caps- Made up of HDPE Material Flanges – 8mm thick Powder Coated (Thickness 90 Micron

CYCLE Pipe – structure made of GI pipe (ISI 239-2004) of 4”OD 42OD and 32 OD of 3 to 4mm thickness Arm – structure made of GI Pipe 32 OD 4mm thickness Bearing – Ball bearing Foot Rest- structure made of MS sheet o f2m thickness Bearing Caps – Made up HDPE material. Seats – Structure made of MS sheet of 3 to 4 mm Thickness Pole Caps – Made up of HDPE materials Paint- Powder Coated (Thickness 90 micron)

8. LEG Press Centre main Pipe 114mm B class (3mm to 3.5 thickness) Sitting pipe 40mm B class (3mm to 3.5 thickness) Both side vertical structure pipe 40mm Seat metallic sheet 3mm to 3.5 mm MS Footrest MS checked plate 4mm thickness Permanent lubricated sealed bearing of reputed brand Nuts and Bolts Galvanized Nylon covers for covering the nuts and bolts.

S/E of 2.5 Sqmm 2 Core Copper Flexible cable complete in all respect as approved by Engineer in charge of make polycab/havelles or equivalent

Providing and fixing of colour coated Khaprail GI roof sheet having thickness 0.47mm , corrosion resistant and durable coating including shape of horizontal/vertical/curved surface with necessary hook, bolt,nut,GI limpet washer Complete in all respect (material cost per Sqm)

Analysis of rate for providing and Fixing of decorative LED light 40watt parking lots having post top lantern made of dia cast aluminum base spum aluminum top and PMMA cover and reflector complete all respect (Make Crompton / Philips / C and S / Havelles/Mapple or equivalent.

Analysis of rate for providing and Fixing of decorative Pole 3 Mtr made of galvanized mild steel fitted with cast aluminum embellishment duly polyurethane paint coated for outdoor fancy lights and size (3 mtr High) 114.3 (1MTR ) X 76.1 (2MTR) with base plate 250 x 250 x 12mm complete all respect (Make Crompton /C and S /Mayfair/ Glowmac or equivalent.

Bidder Name

Amount

K & A India Engineering Construction Pvt Ltd (GSTN-NA) BID ID -1147549

M/S DDR Buildtech (GSTN-NA) BID ID -1147245

Sudhir Gahlawat Contractor (GSTN-NA) BID ID -1148108

The Mangawas Coop L/C Society Ltd. (GSTN-NA) BID ID -1146183

Sudhir Gahlawat Contractor (BID ID -1148108)

M/S DDR Buildtech (BID ID -1147245)

The Mangawas Coop L/C Society Ltd. (BID ID -1146183)

M/S DDR Buildtech (BID ID -1147245)

The Mangawas Coop L/C Society Ltd. (BID ID -1146183)

Sudhir Gahlawat Contractor (BID ID -1148108)