Constt. of sheet shed near dev sttan bral mohalla Pyt Kaleeth Block Khour UNDER THE SCHEME CAPEX BUDGET (PRI PLAN) FOR THE YEAR 2026-27

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge 1:3:6 or richer mix (i/c equivalent design mix)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed. All kinds of soil.

Providng and laying in position cement concrete of specified grade in excluding cost of centering, shuttering all work upto plinth level 1:5:10 (1 cement : 5 coarse sand : 10 graded crushed 40mm agg.) including all leads, lifts and carriages complete.

Providng and laying in position cement concrete of specified grade in excluding cost of centering, shuttering all work upto plinth level 1:2:4 (1 cement : 2 fine sand : 4 graded crushed 20mm agg.) including all leads, lifts and carriages complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes.

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

12MM THICK CEMENT PLASTER WITH 1:4 MIX

Cariage of materials Sand/Bajree for an avg. lead of 07 Kms