AS PER BOQ

Deep drilling of bore hole 125 mm dia. upto 110 mtrs BGL or above as per the strata encountered as per IS specifications by using ODEX method and installation, testing & commissioning of Mark-II Hand Pump along with additional Riser Pipes/Connecting Rods if required. The job also includes construction of Cement Concrete Platform as per site conditions.

Providing of 125 mm dia. M.S. Casing Pipe. The 125mm dia. M.S. Casing Pipe ISI marked should have thickness of 5.4mm conforming to as per IS 4270/2001 medium class (Part-1) 2004electric resistance welded beveled ended inside bead free pipes. All pipes from inside and outside to be provided with two coats of anti-corrosive paint of superior/approved quality. There should be no circumferential weld. The pipe from inside should be bead free having smooth finish. Each pipe shall have subjected to hydraulic pressure test at the manufacturer works in accordance with IS 4270/2001 with latest amendments. All the physical and chemical properties of pipe including tensile strength should be in accordance with IS 4270/2001 with latest amendments

Providing fitting, installation, testing and commissioning of Submersible pump set of 1.5 HP 1 of reputed make conforming to relevant IS Code. The job includes erection of tri pod stand and foxing of chain pulley block. Then lowering of submersible pump set into the bore hole by way of providing and lowering of 32 mm dia HDPE water well column pipe, submersible cable with fixtures such as support wire, clamps, nuts, bolts & washers. Providing and fitting of automatic voltage stabilizer of reputed make 5 KVA. Providing, fitting and installation of single-phase starter controller panel of reputed make to run submersible pump set of 1.5 hp along with canopy Providing and laying of 2.5 sq mm 3 core sub cable of requisite length as desired at site. Providing and laying of 2 core PVC insulated 6.00 sq mm (Aluminum) as service line required from LT pole to starter panel of reputed make. Making of electrical connection with the starter panel, service line and submersible pump set after properly thimbling and testing and commissioning thereof. Providing and fitting of Pipes for outlet of bore and interconnections as required at the site. Job includes cost of material and labour charges, hire charges of tools and tackles and installation & testing of bore at site.