Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.0 LAccepted-AOC R O VPO SAMOR TEHSIL DHARAMPUR DISTT MANDI HP | MANDI | HIMACHAL PRADESH | 175001 | ₹3.0 L | L1 | Accepted-AOC L1 |
| 2 | L2₹3.1 L+₹5,458.75 (1.80%)Rejected-AOC C O MADAN MOHAN BUILDING TOTU SHIMLA 11 TEH DISTT SHIMLA | SHIMLA | HIMACHAL PRADESH | 171001 | ₹3.1 L+₹5,458.75 (1.80%) | L2 | Rejected-AOC L2 |
| 3 | L3₹3.3 L+₹30,873.25 (10.2%)Rejected-AOC LOCATION HIMACHAL PRADESH HP | SIRMAUR | HIMACHAL PRADESH | 171226 | ₹3.3 L+₹30,873.25 (10.2%) | L3 | Rejected-AOC L3 |
| Sl No | Description | Qty | Unit | Rakesh Saklani L1 | abhishek guleria L3 | shashikant L2 |
|---|---|---|---|---|---|---|
| 1.00 | Providing Sal wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. complete in all respect as per satisfaction of Engineer-in –charge. | 0.9 | Cubic metre | 1,10,000 ₹99,000 Lowest | 1,20,000 ₹1,08,000 | 1,20,000 ₹1,08,000 |
| 2.00 | Providing and laying antiskid vitrified floor tiles full body in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, (Kazaria/ Nitco/ Orient bell make), in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete complete in all respect as per satisfaction of Engineer-in-Charge.a). Size of tile 600x600mm | 2.1 | Square metre | 1,750 ₹3,675 | 1,700 ₹3,570 | 1,690 ₹3,549 Lowest |
| 3.00 | Polishing in high gloss/ matt finish melamine clear polish on wood work in required color/ wooden shade texture with following process in the sequence as detailed below.a). The surface to be polished in rubbed with sand paper 80/ 120 no. andthen with sand paper of 160/ 180 nos. applying two coats of sealer with spray gun and following sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. On drying sealer coat, wet rubbing with emery clothfiner grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/ grooves etc. filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done and this surface is further allowed to dry for 12 hrs. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in- Charge.
( Final coat to be done in 1 or 2 layers without gap of time) | 49.54 | Square metre | 1,200 ₹59,448 | 1,500 ₹74,310 | 1,150 ₹56,971 Lowest |
| 4.00 | Demolishing cement concrete manually/ by mechanical means including disposal of material within all leads etc. complete as per direction of Engineer - in – charge. a). Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). | 0.78 | Cubic metre | 1,450 ₹1,131 | 1,300 ₹1,014 Lowest | 1,425 ₹1,111.5 |
| 5.00 | Providing and fixing 2nd class teak wood 62mm into 25 mm wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete in all respect as per satisfaction of Engineer-in-charge. | 6.85 | Running metre | 325 ₹2,226.25 | 300 ₹2,055 Lowest | 350 ₹2,397.5 |
| 6.00 | Providing & fixing 40 mm thick Sawl wooden plank for ramp with planks over lapping each other and jointed with wood screws (frame work and cover fillets to be measured and paid for separately). | 10.87 | Square metre | 5,350 ₹58,154.5 | 5,600 ₹60,872 | 5,275 ₹57,339.25 Lowest |
| 7.00 | Providing & fixing ready made main designed pillar 1220 mm long having a size of 127 mm into 127 mm grouting in Araldite along with selfdrilling screwa of required size etc complete in all respect as per satisfaction of Engineer-in-Charge. | 2 | Each | 4,000 ₹8,000 | 3,500 ₹7,000 Lowest | 4,190 ₹8,380 |
| 8.00 | Providing & fixing ready made designed bluster 762 mm long having a size of 63.5 mm into 63.5 mm to be fixed in Araldite along with nails of required size etc complete in all respect as per satisfaction of Engineer-in-Charge. | 23 | Each | 1,100 ₹25,300 | 1,400 ₹32,200 | 1,000 ₹23,000 Lowest |
| 9.00 | Providing & fixing import wooden hand railing 80 mm into 50 mm in straight length etc complete in all respect as per satisfactionof Engineer-in- Charge. | 7.25 | Running metre | 1,200 ₹8,700 | 1,100 ₹7,975 Lowest | 1,225 ₹8,881.25 |
| 10.00 | Providing and fixing 25 mm thick pine wood planks in designed shelves and partition with screws and proper edging etc complete in all respect as per satisfactionof Engineer-in- Charge. | 9.76 | Square metre | 3,850 ₹37,576 | 3,800 ₹37,088 Lowest | 4,000 ₹39,040 |
Tender Value
₹2.8 L
EMD Value
₹5,700
Closing Date
18 Mar 2026, 10:00 amClosed
Executive Engineer (C)
O/o Estate organization UHF Nauni Solan
Providing wooden ramp in entrance hall of COH at Dr. YSP UHF Nauni Solan
2026_YSPU_130618_1
No.UHF/Const-1/Partfile/2025/ 3392dated 06.03.2026
Open Tender
Civil Works
Item Rate
30 days
Nauni Solan
Please refer Tender documents.
4 documents required · 4 mandatory
₹700
EE(D)
₹5,700
25 Mar 2026
6 Mar 2026
18 Mar 2026
6 Mar 2026
18 Mar 2026
6 Mar 2026
Providing Sal wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. complete in all respect as per satisfaction of Engineer-in –charge.
Providing and laying antiskid vitrified floor tiles full body in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, (Kazaria/ Nitco/ Orient bell make), in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete complete in all respect as per satisfaction of Engineer-in-Charge.a). Size of tile 600x600mm
Polishing in high gloss/ matt finish melamine clear polish on wood work in required color/ wooden shade texture with following process in the sequence as detailed below.a). The surface to be polished in rubbed with sand paper 80/ 120 no. andthen with sand paper of 160/ 180 nos. applying two coats of sealer with spray gun and following sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. On drying sealer coat, wet rubbing with emery clothfiner grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/ grooves etc. filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done and this surface is further allowed to dry for 12 hrs. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in- Charge. ( Final coat to be done in 1 or 2 layers without gap of time)
Demolishing cement concrete manually/ by mechanical means including disposal of material within all leads etc. complete as per direction of Engineer - in – charge. a). Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).
Providing and fixing 2nd class teak wood 62mm into 25 mm wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete in all respect as per satisfaction of Engineer-in-charge.
Providing & fixing 40 mm thick Sawl wooden plank for ramp with planks over lapping each other and jointed with wood screws (frame work and cover fillets to be measured and paid for separately).
Providing & fixing ready made main designed pillar 1220 mm long having a size of 127 mm into 127 mm grouting in Araldite along with selfdrilling screwa of required size etc complete in all respect as per satisfaction of Engineer-in-Charge.
Providing & fixing ready made designed bluster 762 mm long having a size of 63.5 mm into 63.5 mm to be fixed in Araldite along with nails of required size etc complete in all respect as per satisfaction of Engineer-in-Charge.
Providing & fixing import wooden hand railing 80 mm into 50 mm in straight length etc complete in all respect as per satisfactionof Engineer-in- Charge.
Providing and fixing 25 mm thick pine wood planks in designed shelves and partition with screws and proper edging etc complete in all respect as per satisfactionof Engineer-in- Charge.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.45 MB
BOQ_193116.xls
BOQ • 0.29 MB
Tenderdoc.pdf
Tender Documents • 5.21 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .