REPAIRS TO DAMAGED FENCING ALONG THE ROADS IN OLD FACILITY AREA AT HVF, AVADI.

Amount

Earthwork in post holes of not exceeding 0.50 Cu.m each and getting out in dense/hard soil including removal of earth from the site and filling the low lying area near by.

Earthwork excavation in hard/dense soil in trenches width and depth not exceeding 1.50 m and getting out

Dismantling RCC post embedded in concrete any section, including taking out embedded portion and making good disturbed ground.

Dismantling existing damaged steel structure by gas cutting of the damaged structure and handing over the same to CE (Factory) stores.

Material and labour for Quarry dust filling under foundation , flooring etc, including watering and consolidation.

M & L for P.C.C 1:3:6, C2 type using 40mm graded aggregated in foundation, grouting of steel structures.

M & L for reinforced cement concrete type B1, 1:2:4 mix 20mm graded aggregate in for plinth beam etc.,

Material and labour for form work to RCC members such as plinth beam including fair finished surfaces.

Supply and fixing of TMT MS Bars 10mm dia and over, cut to length bent to shape required including cranking, bending, spiraling for hoping for columns, hooking ends and binding with MS Wire not less than 0.9mm dia or securing with clips.

Material and labour for TMT MS bars 6 mm dia to 8 mm dia, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securing with clips

Supply only of chain link fencing made of 8 gauge G.I. wire with 3" aperture and height as directed.

Fixing only of chain link fencing made of 8 gauge G.I. wire with 3" aperture and height as directed.

Supply and fixing of mild steel ROUND plain stiffner Bars confrming to IS 432 - Part 1, 10mm dia and over, cut to length and bend to 'J" shape at both end for hooking together to hold the chain link fencing in position.

Supply and fixing of mild steel angles, rod and flat bars and bolt nuts using posts and struts and for stiffness in fencing and gate including cutting tops to shaping drilling holes.

Material and Labour for Fe 410 -W (Gde- E- 250) quality- A Fe Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

M & L for painting to steel surfaces of any description over 10cm width or girth with two coats of synthetic enamel paint over a coat of Zinc chrome primer including preparing new surfaces.

M & L for painting to steel surfaces of any description not exceeding 10cm width or girth with two coats of Aluminum paint over a coat of Zin chrome primer including preparing new surfaces.

M & L for colour washing t two coats over a coat of white wash on newly prepared wall surfaces.

Material and labour for coloured Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade

Material and labour for PCC 1:2:4 type B1 using 20mm graded aggregate for mass concrete, bedding layer etc.,

Returning / refilling of hard /dense soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm.

Removal of excavated soils exceeding 250 m but not exceeding 500 m and depositing where directed.

Demolition of unreinforced concrete in ground floor and pavings not exc 15 cm thickness

Removal of demolished debris exceeding 250 m but not exceeding 500 m and depositing where directed.

VIJAYALAKSHMI ENETERPRISES