Repair/replacement of joinery flooring plastering sanitary fitting internal water supply to various Bldg for guard post and 2ASD area at 39 FAD Bharatpur

Amount

Dismantling of roofing corrugated, or semi-corrugated sheets or plain steel sheets in roof covering of any thickness and description complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated, semi corrugated or trapezoidal profile steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Fixing only of pre - painted galvalume aluminum zinc coating GI based corrugated, semi corrugated or trapezodial profile steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note : Pre-painted galvalume aluminum sheets retrieved from ser item No 1 above shall be used

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with 'L' type or 'J' type or cranked hook bolts complete all as specified and as directed.

Fixing only of 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with 'L' type or 'J' type or cranked hook bolts complete all as specified and as directed. Note : Asbestos cement corrugated sheets retrieved from ser item No 1 above shall be used

M & L 6 mm thick asbestos cement, serrated ridge for corrugated or semi corugated sheets in roofs fixed with 'L' type or 'J' type or cranked hook bolts complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165.

S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410-W (Gde-E-250) quality A complete all as specified and as directed.

S&F Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified and as directed.

M&L 4 mm thick high pressure steam cured non asbestos fibre cement designer building boards fixed or laid/inserted to timber / GI / Aluminium frame work with screws in ceiling flat or sloping complete. (Frame work for ceiling shall be measured and paid separately) complete all as specified and as directed.

S&F anodised aluminium snap grid frame of size 605x605mm work for false ceiling suspended and fixed complete all as specified and as directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

S&F for PVC wall panelling in repair with panel of 300 mm x 6 mm Hollow section of Sintex pattern SPUF- 146 or equivalent , fixed with PVC plug and screw and inserted to next panel groove, edges and corners of all door/ window/openings etc to be covered with PVC angle fixed with solvent cement complete all as specified as per manufacturer's Instructions

Dismantling/demolition of brickwork or stone boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M & L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6 metre mean radius built in cement & sand mortar 1:6 complete all as specified and as directed.

M&L for Rendering 10 mm thick in cement and sand mortar 1:6 on other than fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement including taking down cement or cement lime plaster of any description from brick or stone walls complete all as specified and as directed.

M&L for Rendering 5 mm thick on fair faces of concrete surfaces as in ceiling in cement mortar 1:3 finished even & smooth without using extra cement including taking down cement or cement lime plaster of any description from brick or stone walls complete all as specified and as directed.

M&L for Rendering 15 mm thick in cement and sand mortar 1:4, mixed with water proofing compound as per manufacturer’s instructions, on fair faces of brick work or cement concrete surfaces including finishing the surface including taking down cement or cement lime plaster of any description from brick or stone walls complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under appropriate item of this schedule.

Supply only liquid water proofing compound ISI Marked complete all as specified and as directed.

M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M & L for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distempering white or tinted (copolymer based resin glue to be added for longer durability and better finish) using hand roller over one coat of water based white pigmented alkali resistant priming paint conforming to IS:109-1968, over wall Surface including all necessary arrangement for execution of work.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above GL) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for 75 mm PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base complete as as specified and as directed.

M&L for 40 mm thick PCC with 1:2:4 type B-1 (using 20 mm graded stone aggrgate) finished even and smooth using extra cement complete all as specified and as directed .

M & L for 25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in sub base to floor, laid and finishing surface of concrete topping even and rough to receving of screed for tiling complete all as specified and as directed.

M&L for 18 to 20 mm thick black machine cut granite slab (one piece) (table rubbed and polished), as in cooking platform set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab laid over and including 15 mm thick cement screed in cement and sand mortar 1:6 complete all as specified and as directed.

M & L for 18-20 mm thick 595 x 595 mm kota stone slab as in flooring/steps laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 20 mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed.

M & L for 15 mm thick machine cut kota stone on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in colored cement to match the shade of marble over and including 10 mm thick rendering in cement and sand mortar 1:4 on fair faces of brick work or concrete surfaces finishing even & rough complete all as specified and as directed.

M&L Vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles not exc. 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement to match the floor laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified

M&L coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified

M&L coloured joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified

M&LGlazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tile to vertival surface laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified

M&LGlazed ceramic tiles in vertical surface 350x 250x 7 mm /450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tile to vertival surface laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified

Dismantling and S & F Rotational moulded polyethylene water storage tanks in triple layer, white with threaded type cover lid of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and as directed. Notes : (i) The water storage tanks shall be 3 layers, HDPE tanks moulded to seem-less perfection of rotational moulding process. The tanks shall be manufactured only from FDA approved special grade of polyethylene and shall be certified fit for potable water.(ii) The tanks shall be ISI marked. Payment for inlet, outlet and over flow pipes and ball valve shall be made separately. However cost of providing necessary GI fittings such as nipples with check nuts for inlet and outlet pipes, GI plug with check nut for over flow pipe and 30 cm long wash out pipe, GI 20mm nominal bore, medium grade and check nut for wash out pipes of size as per actual requirements and as directed by the Engineer-in-Charge shall be deemed to be included in the unit rate of this item.(iv) HDPE storage tanks shall be procured from the manufacturers as per Appendix “B”.)

All as per Seiral item No 38 here in before but capacity 1000 Litres complete all as specified and as directed.

S & F Ball valves 20 mm bore, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

M & L disconnectinng existing tanks, setting aside (or lowering ir required) for repairs, cleaning etc and hoisting if required re-connecting and re-fixing in position of capacity exc. 250 ltr but not exc 500 ltr (cleaning repairing etc measured and paid separately) complete all as specified and as directed.

Cleaning and removing all scale , dirt etc form tanks and from mouths of circulating pipe etc of capacity exc 250 lts but not exc 500 ltr with gunny bags and sands cleaning with fresh water and bleaching powder complete all as specified and as directed.

M & L of disconnecting existing tanks, setting aside (or lowering ir required) for repairs, cleaning etc and hoisting if required re-connecting and re-fixing in position of capacity exc. 500 ltr but not exc 1000 ltr (cleaning repairing etc measured and paid separately) complete all as specified and as directed.

Cleaning and removing all scale , dirt etc form tanks and from mouths of circulating pipe etc of capacity exc 500 lts but not exc 1000 ltr with gunny bags and sands cleaning with fresh water and bleaching powder complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and as directed.

Taking down shutters of any description, area exceeding 1.00 sqm and n.exc 2.00 sqm each complete all as specified and as directed.

Taking down shutters of any description, area exceeding 2.00 sqm each complete all as specified and as directed.

Taking down shutters and refixing in the same opening after easing and adjusting of any description, area exceeding 1.00 sqm and n.exc 2.00 sqm each complete all as specified and as directed.

Taking down shutters and refixing in the same opening, after easing and adjusting of any description, area exceeding 2.00 sqm each complete all as specified and as directed.

Labour only for Resecuring or easing & adjusting, without taking down of shutters of any description n exc 1 sqm each.

Labour only for Resecuring or easing & adjusting, without taking down of shutters of any description exc 1 sqm and n exc 2 sqm each.

Labour only for Resecuring or easing & adjusting, without taking down of shutters of any description area exceeding 2.00 sqm each complete all as specified and as directed.

M & L for powder coated aluminium framed for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified and directed. (Thickness or powder coating not less than 50 micron).

S&F powder coated Aluminium window/ ventilator shutters side hungs type with sash, aluminium section weight not less than 0.55 kg/m including necessary joining cleats, rubber neoprene packing aluminium snap beading ,screws anodized aluminium fittings such as peg stay 150 mm long (1 No) suitable , type B-21 hinge 100mm long (2 No), handle (1 No) etc for each leaf complete all as specified and directed. (Thickness of powder coating not less than 50 micron).

S&F powder coated Aluminium door shutters with aluminium section weight not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,aluminium snap beading ,screws anodized aluminium fittings such as 02 Nos aluminium handle each door, hinges,100mm long beading clips etc complete all as specified and directed. (Thickness or powder coating not less than 50 micron).

S&F aluminium deco grill in door and windows with weight not exceeding 1.00 Kg/Sqm including necessary arrangement for fixing etc as specified and directed.

Repairing of existing aluminium door single leaf exc 1.00 Sqm but nexc 2.0 sqm including oiling and greasing of floor springs and making the door shutter serviceable complete all as specified.(Floor door springs where renewed shall be measured and paid separately under appropriate item complete as as specified and as directed

Repairing of existing aluminium door single leafexc 1.00 Sqm but nexc 2.0 sqm including taking down all members , sheet glass of any thickness cleat , neoprene rubber beading and resecuring all sections & tightening all joints incl fixing new small cleats etc each nexc 100 mm and refixing all members , sheet glass , aluminum cleat new neoprene rubber beading and making the door shutter serviceable , including fixing on Hinges complete all as specified.(Floor door springs, Neoprene rubber beading , Hinges Door Closer where renewed shall be measured and paid under seperate Item

S&F for 4.80 mm thick sheet glass with solar control film 25 micron reflective type sticked to glass pane ,ordinary quality and glazing with neoprene beading exc 0.5 Sqm in each pane

S&F Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing of Fe 410-W (Gde-E-250) quality -A) complete all as specified and as directed.

S & F for 35 mm thick factory made, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F for 35 mm thick, IInd class hard wood (Bonsum/Hollock), glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.24(a) complete all as specified and as directed.

S&F 1.00 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning upmitred angles etc as required.

S&F for 0.56 mm thick aluminium alloy sheeting fixed with screw on door shutter complete all as specified and as directed.

S & F factory made solid PVC moulded door shutter 28 to 30 mm thick (style) with 2 raised panel design with 2 mm thick moulded prelam PVC sheet on the front face and 2 mm prelam PVC sheet on back face in the frame at site, as per specifications and drawing.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick one side prelam PVC sheet & edges will be painted to match with prelam sheet, reinforced with MS Square tube of size 19x19mm.The profile shall be cut and mitred at two corners and joinery by inserting two Nos of 150 mm long brakets of 15 x 15 mm Ms tube in side the 19 x 19 mm Ms tube and suitable sorched.

S & F Butt hinges medium weight, cold rolled mild steel 100 mm size complete all as specified and as directed.

S&F Mild steel barrel tower bolts, stove enamelled black, with bright bolt, 200 mm long complete all as specified and as directed.

S&F MS sliding door bolt, plate type, stove enamelled, black with bright bolt not less than 12mm dia, length of bolt 300 mm, including a minimum of 6 bolts, nuts and washers, four on bolt plate and two on staple plate complete all as specified and as directed.

S&F Mild steel pressed handles, 150 mm long, oval type, stove enamelled, black, ISI marked complete all as specified and as directed.

S & F Butt hinges, 100mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and as directed.

S&F aluminium, anodised, 150mm long barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F aluminium, anodised handle 100mm size cast type anodised complete all as specified and directed.

Supply & fixing in repair Double action floor spring hydraulically regu-lated made up of mini-mum 1.25 mm thick alu-minium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete as specified and as directed

S&F Door closer hydraulically regulated designation No 3, universal type, of aluminium (extruded section body) suitable for door shutters of 851 to 1000 mm in width and of weght between 61 to 80 kg and fixed complete all as specified and directed.

S & F Factory made Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded complete all as specified and directed

Ditto,but without glazing bars

S & F window guard bars, plain and fixed independently in steel window frames, conforming to Fe 290 Gde E-165 complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or from metal frame or stone or concrete or bricks surrounds glazesd with putty, taking out old pins punching or drilling out, complete all as specified and as directed.

S & F Sheet glass 3 mm thick, ordinary quality & glazing with oil putty in squares n.exc 0.5 sqm in each pane including provision of glazing pins/spring clips, complete all as specified and as directed.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed. Note: Cost of supplying wooden beads/ MS flat (as applicable) for fixing wire gauze in panels shall be deemed to be included in respective items of joinery /steel windows. and nothing extra shall be admissible on this account.

Ditto all as per Srl Item No 82 here in above but fixed in repair complete all as specified and as directed.

S&F in repairs tower bolt Aluminum anodised of 200 mm long complete all as specified and as directed.

S&F in repair mild steel sliding bolt of any description and any type of size 300mm long complete all as specified and as directed.

S&F in repair hand made mild steel sliding bolt of any description and any type of size 600mm long complete all as specified and as directed.

S&F in repair MS butt hinges medium weight cold rolled of size 100mm complete all as specified and as directed.

S&F in repair Aluminium anodised with galvanised mild steel hinge pin butt hinges of size 100mm complete all as specified and as directed.

S & F in repair 150mm mild steel (Helical door spring) ordinary spring including with necessary welding work complete all as specified and as directed.

Supply Only neoprene rubber beading suitable for aluminium door / window panels complete all as specified and as directed.

Supply Only Aluminium alloy Hinges 100 mm complete all as specified and as directed.

Supply only 125 mm Aluminium alloy Handle complete all as specified and as directed.

S&F EPDM rubber strip of width 2 cm suitable for 1mm to 2 mm gap , fixed with adhesive like Fevicol pasting alongwith nails complete all as specified and as directed .

S&F Aluminium Door seal of overal size 42 mm having nylon brush of 20 mm fixed on aluminium body strip of 22 mm, fixed with screw on Aluminium door, wooden shutters or PVC shutters complete all as specified and as directed .

S&F for Rubber door seal of overall size 35 mm fixed screw on wooden or PVC Shutters complete all as specified and as directed .

Supply & fixing in repair Double action floor spring hydraulically regu-lated made up of mini-mum 1.25 mm thick alu-minium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

S&F in repairs Aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 3 , universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed.

S&F in repair for 100 mm mild steel 4 lever mortice lock vertical type of size complete all as specified and as directed.

S & F in repair for 150 mm floor door stopper of aluminium alloy body and tongUe,anodised with hard drawn steel spring complete all as specified and as directed.

M&L for welding in repairs exc 2.5 cm but n exc 5.0 cm in length over metal to be welded n exc 6mm thick complete all as specified and as directed.

M&L for welding in repairs exc 2.5 cm but n exc 5.0 cm in length over metal to be welded exc 9mm but n exc 20 mm thick complete all as specified and directed.

M&L Painting to new wood or wood based surfaces of any description, not otherwise described over 10cm width or girth including preparation of surfaces, priming with pink primer (one coat) & finishing with two coats of synthetic enamel paint complete all as specified and as directed.

M&L Painting to old wood or wood based surfaces of any description, not otherwise described over 10cm width or girth including preparation of surfaces,finishing with one coat of synthetic enamel paint complete all as specified and as directed.

M&L Painting to new steel or steel based surfaces of any description, not otherwise described over 10cm width or girth including preparation of surfaces, priming with red oxide zinc chrome primer (one coat) & finishing with two coats of synthetic enamel paint complete all as specified and as directed.

M&L Painting to old steel or steel based surfaces of any description, not otherwise described over 10cm width or girth including preparation of surfaces, finishing with one coat of synthetic enamel paint complete all as specified and as directed.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing and connections, 25 mm bore fixed on walls, floors or ceiling etc including cleaning for re-fixing or removal to store complete all as specified and as directed. .

Refixing old steel GI tubing and connections in new or old position with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and as directed.

Refixing old steel GI tubing and connections in new or old position with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and as directed.

S&F GI tubing medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and as directed.

S&F GI tubing medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and as directed.

S&F GI tubing medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 25 mm complete all as specified and as directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm including complete all as specified and as directed.

S&F in repair Bib tap, cast copper alloy Chromium Plated fancy type/ long body with crutch or butterfly handle, screwed down, suitable for 15mm nominal bore iron pipe screwed for iron or brass ferrule and fixed complete all as specified and as directed.

S&F in repair pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shank and fly nuts, with or without lettered "Hot" or "Cold" suitable for 15mm nominal bore iron pipe, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair 15 mm bore angle valve, cast copper alloy, chromium plated, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 20 mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 25 mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions complete all as specified and directed.

M&L for greasing and oiling of rolling shutter of size not exc 13sqm along with the guide channel,helical spring ,anchoring rod all other parts as to work the shutter Smoothly and all as directed.

M& L for greasing /oiling and easing of steel door with channel moving wheels as to work with easily all as directed.

Cutting or uprooting grass incl removing old mud phuska/ roof treatment of any thickness and description, removing rubbish off the premises, cleaning surface and preparing to receive new treatment complete all as specified.

Removing building materals etc. to a distance exc. 100 m and n exc. 5.0 Km beyond the lead included in the rates, including loading, unloading and stacking at the destination

M&L for screed bed or bedding layer of cement mortar 1:4, 20 mm thick finished even and smooth without using extra cement all as directed.

M&L for preparing surfaces for roof treatment by removing all loose gravel, dirt, oil, grease and foreign matter by jet of dry air and clean the surfaces mechanically or by grinding to make it smooth before application, repair all cracks by cutting "V" groove and fill with PMC mortar (Polymer modified cement mortar) prepared by cleaning free from dust and loose particles and apply on dry surface first coat of crack fillar using putty knife or trowel allow to dry for 4 to 6 hr, afterthat apply second coat and dry for 4-6 hrs in ratio as per manufacturers specification, provide 75 mm x 75 mm coping made out of PMC mortar as above on all joints of vertical upstands to ensure that moisture content in the prepared surface does not exceed 5% immediately before application of liquid membrane. Material incorporation & Protection be provided as Terrasheild first apply with water (ratio terrasheild : water will be 4:1) as primer with coverage area 0.1 Kg per Sqm. After 2-3 hour , second step apply directly first coat of terrasheild 0.30 to 0.40 mm thickness coverage area 0.5 to 0.75 Kg per Sqm with roller.Spread non woven geo textile of 40 / 50 gsm with overlap of 50 mm in both direction when the surface is still tacky. After 4-6 hour later, apply third step apply directly second coat of terrasheild 0.30 to 0.40 mm thickness coverage area 0.5 to 0.75 Kg per Sqm with roller. final thickness of complete treatment should be minimum 1.0 mm. Water tank and Khurra location one additional coat of terrasheild 0.30 to 0.40 mm thickness coverage area 0.5 to 0.75 Kg per Sqm be .provided. after complete application full curing minimum 7 days . Above complete application will be done by authorized apllicator from Manufacturer as per manufacturer's specification. Make : IWL co/ STP/Piddilite .

M&L for 40mm thick PCC type B-0,( 1:2:4) using 12.5 mm graded stone aggregate with integral water proofing compound as per manufacturers specification finished even and smooth without using extra cement

S&F in repair Sheet glass clad polycarbonate 60.30 mm thick bullet/blast- resistant, manufacture's certified protection level UL 752 level 8(05 shot) and glazing with oil putty in squares not exceeding 0.5 sqm each all specified in particular specifications. Make : Thermosol Glass india (Pvt) Ltd, Natural Bullet proof Glass, SK TUFF Transparent Bullet Proof Glass

M&L for Rendering 10 mm thick in cement and sand mortar 1:6 on other than fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M/s Gupta Traders

M/S MAMTA CONSTRUCTIONS

krishna Associate

M/s Ranaji Construction Co

PD GUPTA AND COMPANY

M/s S. K. Construction Co.