REPAIR TO LEAKAGE/SEEPAGE OF ROOF/BLDG AND OTHER RELATED B/R WORKS IN ZONE-IV UNDER B/R-IV OF GE (SOUTH), MEERUT CANTT

Amount

Material & labour non-skid coloured ceramic tiles of size 400x400x7-8mm thick, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) including dismantling of old tiles complete all as specified & directed.

Material & labour for glazed coloured ceramic tiles of size 450x300x7-8mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:6 including dismantling of old tiles complete all as specified & directed.

Material & labour for Non skid coloured tile tiles for skirting of size 600x600x8-10mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:4 including dismantling of old tiles complete all as specified & directed.

Material & labour for rendering 15mm thick in patchy on fair faces of brick work or concrete surfaces finished even and fair on walls in cement mortar (1:6), including taking down old plaster from walls complete all as specified & directed.

Material & labour for Rendering 10 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), ncluding taking down old plaster from walls complete all as specified & directed.

Material & labour for dubbing out average 15 mm thick on irregular faces of chajjas, balconies, walls etc by using cement concrete 1:2:4, type B0 using 12.5mm stone agg complete all as specified & directed.

Material & labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Material & labour for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

Material & labour for preparation of New wall plaster surfaces and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

Material & labour preparation of new walls and applying two coats of oil bound distemper over finishing the wall surfaces with wall care putty complete all as specified and directed.

Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.

Material and Labour for 20mm thick cement paster in CM 1:4 mixed with WPC @ 2 % by weight of cement finised even and smooth without using extra cement on roof surface and wall (WPC will be measured and paid seperately as supply only rate) complete all as specified & directed.

Supply only liquid water proofing compound complete all as specified & directed.

Material & labour for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed evenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen , over it laid with 3mm thick APP modified polymeric water proofing membrane minimum weight 3.6 Kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160 Gm per Sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.20 kg per Sqm as per manufacturer’s instructions, complete all as specified & directed. (including existing water tank on roof disconnected and after cleanig same position connecting)

S&F in repair Glass Corner Shelf fitted in wall with screws complete all as specified and directed.

Supply & fix in repair 15 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

Supply, fix in repair 20mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

Supply & fix in repairs Fancy type Long body Bib Cock cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified & directed.

Supply & fix in repair wall mixer brass chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm bore pipes with telephonic with crutch (Provision for hand shower) complete all as specified and directed.

Supply & fix in reapir 15mm bore Angular Cock/Stop valve cast copper alloy fancy type chromium plated, complete all as specified and directed.

Supply & fix in repairs vitreous china wash hand basin, white, flat back of size 550x400mm (excluding taps, waste chain and plug and porcelain stopper) but including brackets suitable for 15mm dia pipe complete all as specified & directed.

S&F in repair Bottle trap of PTMT of bore dia of discharge pipe as 32/40mm and having minimum water seal of 25mm (Minimum weight 32mm-260gms/40mm-270 gms) complete all as specified & directed.

Supply & fix in repairs vitreous china squatting pan of pattern orrisa size 580mm x 440mm, white with “P” or “S” trap, including integral foot rests any pattern including connections to trap and flush pipe etc including making good to floor to match the existing complete all as specified & directed.

Supply & fix in repairs vitreous china wash down water closet Pedestal pattern white complete all as specified & directed.

Supply & fix in repairs PVC low level flushing cistern of 9-10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed.

Supply & fix white plastic seat cover for W.C.(E.T.) white including M.S. CP or aluminium hinging device complete all as specified and directed.

Supply and fix in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified & directed.

S&F CP brass jet spray with hand hold arrangement incl. 1.5m long flexible pipe with hook of superior quality all as directed.

S&F CP Hand shower / health faucet fitted in EWC with hand hold arrangement incl 1.50 long flexible pipe with hook of superior quality

Supply & fix in repairs PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply and fix in repair for 75mm bore PVC floor traps plain with grating fixed in repairs including jointing with solvent cement complete all as specified & directed.

Supply & fix in repairs steel C.P. grating 100/125 mm dia waste pipe hole fitted as required at site complete all as directed by Engineer-in-Charge.

S&F 15 mm bore concealed stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends, as in repair including flench complete all as specified & directed.

Material & labour for sunken slab treatment comprising of the following :- (a) taking out/down old existing sunken slab and cleaning the old RCC surface slab including removal of rubbish from site to a dist n exe 250m, (b) Material & labour for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone agg) over cleaned sunken slab, (c) Material & labour for applying bitumen grade 85/25 over prime coat @ 1.20kg/sqm, (d) Material & labour for 25mm thick plaster in CM 1:4 using WPC @ 200ml per bag of cement on wall of sunken portion, (e) Material & labour for suuitable thickness of PCC 1:5:10 type E2 (using 40mm broken brick agg) for filling the sunken portion upto floor level, (f) S&F 32mm dia GI pipe of medium grade, 450mm long (for draining of water) complete all as specified and directed.

Taking down Chowkatts or frames (without taking off shutters) exc 1.5 sq. m but n exc 4 sq m each. complete all as specified and directed.

Material & labour Factory made pressed steel frames, conforming to IS, having profile 105 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, etc, complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified.

S&F Aluminium, anodized barrel tower bolts of extruded section and fixed, 200 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified.

S&F aluminium anodized handle of size 200 mm, ISI marked, complete all as specified.

Taking down Shutters of any description exc 1 sq.m and n exe 2sqm

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm PVC sheet reinforced suitable for solid PVC door suppling & fixing in opening, complete all as specified.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing.

Dismantling asbestos cement (corrugated or semi corrugated ) sheets in roof covering complete all as specified & directed.

Supply and fix Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as including ridge also specified. complete all as specified and directed.

Material & labour for 6 mm thick fibre cement corrrugated sheets fixed with' L' or 'J' type or cranked hook bolts as in roof complete all as specified & directed.

S&F Plain, galvanised, mild steel sheeting,of 0.50 mm thickness as in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc 275 complete all as specified & directed.

Dismantling ceiling board of insulation boards etc any thickness complete all as specified and directed.

Material & labour for provision of Galvanised Iron anodized frame work(snap grid) suitable for size as in false ceiling of size 600mmx600mm consisting of followings and all as directed:-i) Galvanised Iron sections incorporated in frame work shall conform to designation 63400 given in IS: 737-1986. ii) The snap grid shall consist of Galvanised Iron anodized main /cross tee of size 36.5mmx25mmx1.4mm thick and 25mm x 25m x1.4mm thick, respectively. iii) Snap grid frame shall be fixed to ceiling with supporting hangers consisting of S & F 2mm dia mild steel GI wire. iv) The main and cross tees shall be jointed at junction/crossings with Galvanised Iron anodized angle bracket, of size 15mmx15mmx1.4mm thick, fixed with suitable mild steel, bolts, nuts and washers all as per manufacturer’s instructions. v) The snap grid (main/cross tee section) shall be supported at ends all along the wall with Galvanised Iron anodized angle of size 25mmx25mmx1.4 mm anodized thick. vi) Size of the snap grid shall be 605mm by 605mm. vii) Minimum average thickness of anodizing shall be 15 micron complete as per manufcturer"s instructions.

S&F 4 mm thick Gypsum/Everest Board in ceiling size 60cm x 60cm fixed to aluminium snap gird complete as per manufcturer"s instructions.

Taking down roof trusses or Purlins or coupled rafters or trussed beams up to 4 to 8 meters complete all as specified & directed.

S&F in rolled mild steel as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, reveting and / or welding or connecting with bolts and nuts (including revets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc, also for wedging, plumbing, truing up and fixing conf to Fe-410-W (Gde-E-250) quality A complete all as specified and directed.

S& F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 complete all as specified and directed.

Material & labour Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) including demolition of old bricks complete all as specified and directed.

Material & labour rendering 15mm thick in patchy on fair faces of brick work or concrete surfaces finished even and fair on walls in cement mortar (1:6), complete all as specified & directed.

Material & labour Preparing newly plaster surfaces & applying two coats of cement base paint complete all as specified & directed.

S&F Insulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing and Insulated Panel with Single Side Prelam PVC sheet used instead of plain colour sheet complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails or screwes complete all as specified & directed.

B.K.construction

ATHARV CONSTRUCTION

Rajneesh Jain

SA construction co.