Shifting of Electrical Utilities from Armapur Panki Lower Ganga Canal to Loharan Bhatta, G.T. Road for Construction of Road by PWD under Sarvoday Nagar and Ratanpur Division, KESCo., Kanpur.

Loading, Carriage and unloading of S.T. Poles including old & used pole from store to work site or vice versa.

Loading, Carriage and unloading of Aerial Bunched Cable from store to work site or vice-versa.

Taking out 11 KV XLPE cable size 3x70 to 3x185 sq.mm from cable drum and thereafter transportation from store to work site or vice-versa.

Loading, Carriage and unloading of ACSR Dog Conductor from store to work site or vice-versa.

Loading, Carriage and unloading of all other miscellaneous items except mentioned above from store to work site or vice versa.

Fabrication/ modification of different MS Item as per site requirement.

Erection of single pole including all fitting.

Erection of double pole including all fitting.

Erection of Stud pole including all fitting.

Grouting of ST Pole including cost of Civil Material as per standard specification.

Making of pole plinth including cost of Civil Material.

Painting of ST Pole including cost of Paint.

Erection of Earth Rod complete including cost of Civil Material.

Erection of stay rod complete.

Chopping of tree branches lying in the route of over head HT/LT line touching the tree branches to the phase line conductor making fault to the feeder, for 3” to 18” dia or as per requirement of site.

Laying, Stringing & Tensioning of ACSR Dog Conductor for constructing 3 phase 3 wire 11 KV H.T. O.H. line.

Laying of G.I. Wire including cross lacing.

Making H.T. Section Point in existing 11 KV H.T.line.

Erection of Bracing set on double pole Stracture.

Excavation of S.T. Pole (old & used) by digging of pit/with help of crain or by cutting with welding machine.

Supply and Erection of piercing connector 120-25 sq.mm.

Supply and Erection of Piercing connector 95-25 sq.mm

Supply and Erection of L.T. Bare Neutral Connector

Supply and Erection of Dead end clamp with Eye hook & holding clamp.

Supply and Erection of Suspension Clamp with Eye hook & holding clamp.

Supply and Erection of Dead end Sealing Cap.

Supply and Erection of M.S. Clamp 5½" (50x6mm)

Supply and Erection of M.S. Clamp 4½" (50x6mm)

Supply and Erection of M.S. Bracing Clamp 5½"

Supply and Erection of M.S. Bracing Clamp 6½"

Supply and Erection of C.I. Packing 5½" Piece

Supply and Erection of Nut & Bolts off size with washer

Laying of A.B Cable from pole to pole for constructing L.T. overhead line.

Dismantling of existing A.B. Cable and making into bundles.

Dismantling and relaying of existing A.B. Cable on newly erected poles.

Dismantling of ACSR Weasel Conductor.

Erection of Single Phase Distribution box on erected poles.

Erection of Three Phase Distribution box on erected poles.

Disconnection and reconnection of existing single phase consumer connections on newly erected/shifted pole.

Disconnection and Reconnection of existing Three phase consumer connections on newly erected/shifted pole.

Digging of trench 0.3 Mtr wide and 1-1.2 Mtr. Deep for laying of 11 KV Cable.

Normal Soil

Kharanja Road

Metallic/CC Road

Laying of 11 KV Cable 3x185 Sq.mm in above digged trench covering with bricks and sand as per standard Specification.

Laying of 11 KV Cable 3x70 Sq.mm from existing 11 KV line to distribution Transformer.

Making and mounting of O/D cable joint box 3x70 to 3x185 Sq.mm.

Construction of T/F Plinth size 1.2x1.2x1.2 Cubic Mtr. (including civil material and 6feet (1.5 feet long 4 Pcs.) M.S. Angle size 65x65x6mm) will be Solid with brick work 75mm thick C.C. in ratio 1:4:8 with cement, coarse sand and brick ballast.

Fabrication and erection of T/F fencing of frame size 3x2.5 mtr. Including cost of M.S. Angle size 40x40x5 mm and M.S. Flat size 35x5 mm, fixing of welded steel wire fabric on steel frames by welding of 10 SWG wire fabric, including painting of two coats of paint on iron based surfaces with ready mixed paint to give bus green shade including of oil and dust.(2 Set).

Deep bore pipe earthing (G.I. Pipe 40 mm dia, B-Class, 40 feet, socket, cutter and MS flat/M.S. Wire with nut & bolt) with connection pipe to distribution Transformer. Neutral or Body. All material will be provided by Contractor.

Dismantling and shifting of existing distribution Transformer from existing plinth to newly erected plinth/D. pole.

Dismantling of existing ACB and erection, re-grouting at nearby location of Newly Constructed Transformer plinth/Double Pole and making suitable ACB plinth by using Brick Cement and core sand as per standard Specification.

Connecting of constructed H.T./L.T. network with Kesco mains including testing, commissioning and energisation of the same completely.

Khan Traders and Electrical Works

Ali and Sons Construction