GE/CHM-36/2021-2022 REPAIR AND MAINTENANCE OF INTERNAL ELECTRIFICATION WITH FITTING AND FIXTURE OTM ACCN UNDER AGE B/R III AT CHANDIMANDIR

Amount

Taking down carefully aluminum/copper point wiring on & including hard wood battens, surface conduit and board/blocks etc or through conduits for light , socket or power point ,fan point complete incl fitting such as switches ,sockets, ceiling rose , holder socket, light fitting, regulators and making good disturbed surfaces of wall, floor , ceiling etc and removing materials (other than those for which credit has been given by the contractor) to the MES stores yard for keeping in safe custody complete all as specified and directed.

Material and labour point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in existing conduit terminated on and including new modular sunken box and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface flush with wall , comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note : (i) Unit rate is inclusive of making good the disturbed surfaces by provding by wall putty/POP after mason work and finshing to match the original surface and nothing extra shall be paid on this account. (ii)Unit rate is inclusive of cutting chases in wall /foor/PCC for sunken box and making good the disturbed surfaces to match the original and nothing extra shall be paid on this account.

All as per serial item 02 herein before but for socket outlet 3 pin 5 Amps on same board complete all as specified and directed

All as per serial item 02 herein before but for socket outlet 3 pin 6 Amps on independent board complete all as specified and directed

All as per serial item 02 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSH cable & 2.5 Sqmm (nominal area ) cable as earth continuity conductor

Material and labour point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed PVC conduit terminated on and including new modular sunken box and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface flush with wall , comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note : Unit rate is inclusive of making good the disturbed surfaces by provding by wall putty/POP after mason work and finshing to match the original and nothing extra shall be paid on this account. Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original and nothing extra shall be paid on this account.

All as per serial item 06 herein before but for socket outlet 3 pin 5 Amps on same board complete all as specified and directed

All as per serial item 06 herein before but for socket outlet 3 pin 6 Amps on independent board complete all as specified and directed

All as per serial item 06 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSH cable & 2.5 Sqmm (nominal area ) cable as earth continuity conductor

Material and labour point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed PVC conduit terminated on and including new steel sunken boxes 1.2mm thickness covered with provision of 3mm thick plastic laminated sheet, comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original finishes surface and nothing extra shall be paid on this account.

All as per serial item 10 herein before but for socket outlet 3 pin 5 Amps on same board complete all as specified and directed

All as per serial item 10 herein before but for socket outlet 3 pin 6 Amps on independent board complete all as specified and directed

All as per serial item 10 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSH cable & 2.5 Sqmm (nominal area ) cable as earth continuity conductor

Material and labour point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in existing conduit terminated on and including new steel sunken boxes 1.2mm thickness covered with provision of 3mm thick plastic laminated sheet, comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note : Unit rate is inclusive of making good the disturbed surfaces to match the original and nothing extra shall be paid on this account. Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original and nothing extra shall be paid on this account.

All as per serial item 14 herein before but for socket outlet 3 pin 5 Amps on same board complete all as specified and directed

All as per serial item 14 herein before but for socket outlet 3 pin 6 Amps on independent board complete all as specified and directed

All as per serial item 14 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSH cable & 2.5 Sqmm (nominal area ) cable as earth continuity conductor

Supply & fix switch modular type (ISI marked), single pole, one way 6 Amps, one module (ISI marked), complete all as specified & directed.

Supply & fix switch modular type (ISI marked), single pole, one way 16 Amps, one module (ISI marked), complete all as specified & directed.

Supply & fix socket shutters outlet 2/3 pin 6 Amp modular type multi purpose combined two module (ISI marked), complete all as specified & directed.

Supply & fix socket shutters outlet 2 in 1 pin 6/16 Amp modular type multi purpose combined 2 module (ISI marked), complete all as specified & directed.

Supply & fix modular switch type stepped fan regulator, single pole, 230 volt one module all as specified and directed.

Supply & fix modular switch type bell push, single pole, 230 volt one module,(ISI marked) all as specified and directed.

Supply & Fix switch piano, flush type, 5 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge

Supply & Fix switch piano, flush type, 15 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge

Supply & Fix sockets outlet multipurpose 2 in 1 pin, 5 and 15 Amps flush type ISI marked all as specified and directed by Engineer-in-charge

Supply & Fix sockets outlet multipurpose 2 in 1 pin, 5 and 15 Amps flush type ISI marked all as specified and directed by Engineer-in-charge

Supply & Fix stepped type electronic fan regulator flush type complete all as specfied and directed.

Supply and fix electric Bell, AC, 230 volts, single pole all as specified and directed by Engineer-in-charge.

Supply & Fix bell push, flush type, 5 amps, 230 volts, single pole, complete all as directed by Engineer-in-charge

Supply & Fix ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specified and directed by Engineer-in-charge.

Supply and fix Lamp holder, PVC/Polycarbonate type with back plate angular type fixed on wall suitable for batten fitting including supply and fixing of 7 watts LED lamp complete all as specified and directed.

Supply and fix bulk head fitting in engineering plastic housing with clear prismatic diffuser 6 watt capacity complete all as specified and directed.

Supply and fix indoor decorative extruded aluminium anodized housing /CRCA sheet steel coated housing (suitably coated to improve resistance against corrosion) LED batten type luminaries' (LED batten shall be prewired box type, retrofit solution with and including replaceable retrofit cool day white LED tube rod with well designed aluminium heat sink /aluminium housing for excellent heat dissipation; 4 feet (appx) size, high efficiency electronic driver, system wattage not more than 20 watt (lumen output not less than 2000 lumen), UV radiation light fitting with wall mounting arrangement and making connections with PVC insulated copper conductor 3 core cable of 0.5 sq mm" complete all as specified and directed.

Supply and fix indoor decorative extruded aluminium anodized housing /CRCA sheet steel coated housing (suitably coated to improve resistance against corrosion) LED batten type luminaries' (LED batten shall be prewired box type, retrofit solution with and including replaceable retrofit cool day white LED tube rod with well designed aluminium heat sink /aluminium housing for excellent heat dissipation; 2 feet (appx) size, high efficiency electronic driver, system wattage not more than 10 watt (lumen output not less than 1000 lumen), no UV radiation light fitting with wall mounting arrangement and making connections with PVC insulated copper conductor 3 core cable of 0.5 sq mm" complete all as specified and directed.

Taking down carefully old copper or aluminium sub main wiring of any Nos of wiring and size with earth wire on wooden batten/ surface conduit/ casing- capping complete with its all accessories and making good disturbed surfaces of wall , floors etc complete all as specified & directed by Engineer-in-charge.

Supply and fix sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 6 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 6 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through in PVC concealed conduit 25mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good the disturbed surfaces after taking out old unserviceable sub main wiring complete by provding by wall putty/POP after mason work and finshing to match the original surfaces and nothing extra shall be paid on this account all as specified and directed. Note : (i) For the purpose of measurement, 2 single core of 6 sqmm and one single core of 06 sqmm cable along with PVC conduit shall be considered as 1 running metre. (ii) cutting chases and PVC conduit will be measured and paid separately.

Supply and fix sub main wiring with four single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 6 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 6 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through in PVC concealed conduit 25mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good the disturbed surfaces after taking out old unserviceable sub main wiring complete by provding by wall putty/POP after mason work and finshing to match the original surfaces and nothing extra shall be paid on this account all as specified and directed. Note : (i) For the purpose of measurement, 4 single core of 6 sqmm and one single core of 06 sqmm cable along with PVC conduit shall be considered as 1 running metre. (ii) cutting chases and PVC conduit will be measured and paid separately.

Supply and fix sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 10 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 10 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through PVC concealed conduit 25mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good the disturbed surfaces after taking out old unserviceable sub main wiring complete by provding by wall putty/POP after mason work and finshing to match the original surfaces and nothing extra shall be paid on this account all as specified and directed. Note : (i) For the purpose of measurement, 2 single core of 10 sqmm and one single core of 10 sqmm cable along with PVC conduit shall be considered as 1 running metre. (ii) cutting chases and PVC conduit will be measured and paid separately.

Disconnecting the power supply and taking down carefully by unscrewing from boards fittings and fixtures such as DBs, Junction Box, Panels of any size complete with all MCCB's ,MCB's etc and removing from site, all as specified and directed by Engr-in charge.

Supply and fixing MCCB, 100 to 125 Amps, four pole,3 phase ,36KA, 415 volt with adjustable thermal and maganetic release complete all as specified and directed

Supply and fix vertical TPN distribution board double door flush mounting with provisions for MCCBs incomer upto 100to 125Amps & outgoing 4 way having IP 54 protection complete all as directed

Supply and fix MCB DB, with provision for incoming 2 pole (MCB / Isolator ) and single phase outgoing, suitable for surface and flush mounting, IP 43 protection, of metal 2 way all as specified.

Supply and fix MCB DB, with provision for incoming 2 pole (MCB / Isolator ) and single phase outgoing, suitable for surface and flush mounting, IP 43 protection, double door of metal 8 way all as specified.

Supply and fix MCB DB, with provision for incoming 2 pole (MCB / Isolator ) and single phase outgoing, suitable for surface and flush mounting, IP 43 protection, double door of metal 12 way all as specified.

Supply & Fix for MCB ,SP , 240 volt, 6Amps to 32Amps, 10 KA , 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed

Supply & Fix MCB ,SP , 240 volt, 63Amps, 10 KA , 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed

Supply & Fix for MCB ,DP , 240 volt, 40Amps, 10 KA , 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed

Supply & fix of 25 to 32 mm dia, rigid non metallic PVC concealed conduit, 'ISI marked', inclusive of all fittings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing accessories such as couplers lock nuts, saddless, pipe hooks etc for wiring, complete all as specified

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth complete all as specified & directed by Engineer-in-charge.

Material & labour, earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.00mm thick, burried directly in ground vertically to a depth not less than 2.25m below normal ground level, with top edge of the plate not less than 1.5m below normal ground level, earth plate surrounded by 15cm thick and packed alternate layers of charcoal dust and common salt, connected with and including earth lead of GI wire 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron or thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm dia bore including watering pipe 20mm dia bore GI light grade (ISI marked) with funnel and wire mesh, including all necessary excavation and earth work, PCC chamber in plain cement concrete (1:3:6) type C-1 and pit cover of presast RCC with MS frame etc and all as shown in electrical plate No 3 of MES Sch Part-I (2009), complete all as specified and directed. Note(s) :- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B-1, 80mm thick reinforced with XPM not less than 4Kg/Sqm. (ii) PCC chamber shall be constructed 500 mm away from the edge of earth pit. (iii) Rate shall include earth lead and protection pipe of length 7.5m, excess beyond 7.5m length required at site shall be measured and paid separately. (iv) Earth resistance should be less than 3Ohm. In case the test results are not found below 3Ohm, complete earthing will be redone without any extra cost to Govt.

Supply and fix in repair multipurpose PVC box with 05 Amps multipin socket and 05 Amps switch with necessary connection including taking down oldunserviceable/rusted box complete and making good the surface as per existing complete all as specified and directed

Supply and fix in repair with 15 Amps multipin socket and 15 Amps switch with necessary connection including taking down old rusted box complete and making good the surface as per existing complete all as specified and directed

Supply & Fix in repair casing capping with fixing accessories of size 15mm width complete all as specified.

Supply & Fix in repair casing capping with fixing accessories of size 20mm width complete all as specified.

Supply & Fix in repair casing capping with fixing accessories of size 25mm width complete all as specified.

Supply and fix in replacement machine/black star screws of size 1.5" & 2" with suitable size washer complere all as specified and directed by Engr-in Charge

Supply & Fix in repair PVC junction cover circular type with suitable size screws and washers complete all as specified and directed by Engr-in Charge

Taking down old rusted sunken box any type/capacity including cutting/chases and making good to disturb surface all as specified and directed by Engr-in Charge

Supply and fix sunken box 2 mm thick 4"x4" including cutting/chasis flush to wall and making good to disturbed surface complete all as specified and directed

Supply and fix sunken box 2 mm thick 6"x4" including cutting/chasis flush to wall and making good to disturbed surface complete all as specified and directed

Supply and fix sunken box 2 mm thick 6"x 6" including cutting/chasis flush to wall and making good to disturbed surface complete all as specified and directed

Supply and fix sunken box 2 mm thick 6"x 8" including cutting/chasis flush to wall and making good to disturbed surface complete all as specified and directed

Supply and fix sunken box 2 mm thick 8"x 8" including cutting/chasis flush to wall and making good to disturbed surface complete all as specified and directed

Supply and fix sunken box 2 mm thick 10"x 8" sincluding cutting/chasis flush to wall and making good to disturbed surface complete all as specified and directed

Supply and fix sunken box 4 module suitable for 4 module cover plate including cutting/chasis flush to wall and making good to disturbed surface complete all as specified and directed by Engr-in Charge

Supply and fix of sunken box 6 module suitable for 6 module cover plate including cutting/chasis flush to wall and making good to disturbed surface complete all as specified and directed

Supply and fix sunken box 8 suitable for 8 module cover plate including cutting/chasis flush to wall and making good to disturbed surface complete all as specified and directed

Supply and fix sunken box 10 module suitable for 10 module cover plate including cutting/chasis flush to wall and making good to disturbed surface complete all as specified and directed

Supply and fix sunken box 12 suitable for 12 module cover plate including cutting/chasis flush to wall and making good to disturbed surface complete all as specified and directed

Supply & Fix in repair of switch piano flush type, 5/6 Amps single pole one way fixed and connecting to existing board complete all as specified and directed .

Supply & Fix in renewal of switch piano flush type 15 amps single pole one way fixed and connect to existing board complete as per existing make/sample all as specified and directed

Supply & Fix in renewal of socket outlet 5 pin and 5/6 amps flush type incl fixed and connect to existing board complete as per existing make/sample all as specified and directed

Supply & Fix in renewal fo socket outlet flush type 2 in 1, 3 pin 5 and 15 Amps fixed and connect to existing board complete as per existing make/sample all as specified, and directed.

Supply & Fix in renewal stepped type electronic fan regulator switch piano flush type complete all as specfied and directed.

Supply & Fix in repiar Red & green incandescent lamp B22 type complete all as specified and direced.

Supply and fix in renewal electric Bell, AC, 230 volts, single pole all as specified and directed by Engineer-in-charge.

Supply & Fix in renewal bell push, flush type, 5 amps, 230 volts, single pole, complete all as directed by Engineer-in-charge

Supply and fix in replacement of 4 module cover and plate with machine screw and washers suitable for 4 module sunken box complete all as specified and directed

Supply and fix in replacement of 6 module cover and plate with machine screw and washers suitable for 6 module sunken box complete all as specified and directed

Supply only plain PVC electrical wire insulating Tape roll in 25 mtr length Complete all as specified and directed

Supply and fix in replacement of 8 module cover and plate with machine scdrew and washers suitable for 8 module sunken box complete all as specified and directed

Supply and fix in replacement of 10 module cover and plate with machine scdrew and washers suitable for 10 module sunken box complete all as specified and directed

Supply and fix in replacement of 12 module cover and plate with machine scdrew and washers suitable for 12 module sunken box complete all as specified and directed

Supply & Fix in repair switch modular type, 6 Amps single pole one way as per sample or as existing make/model suitable to existing module frame with provision of screw, all as specified

Supply & Fix in repair switch modular type, 16 Amps single pole one way as per sampleor as existing make/model suitable to existing module frame with provision of screw all as specified

Supply & Fix in repair socket outlet modular type 2/3 pin, 6 amps as per sample or as existing make/model suitable to existing module frame with provision of screw all as specified

Supply & Fix in repair for socket outlet modular type 2 in 1, 3 pin combine 6/16 Amps 2 modules, as per sample or as existing make/model suitable to existing module frame with provision of screw all as specified

Supply & fix in repair modular switch type stepped fan regulator, single pole, 230 volt two module all as specified and directed.

Supply & fix in repair modular switch type bell push, single pole, 230 volt one module,(ISI marked) all as specified and directed.

Supply and fix in replacement of hylum sheet 3mm thick with machine screw and washers including cutting for switch/socket suitable for 4"x4" sunken box complete all as specified and directed by Engr-in Charge

Supply and fix in replacement of hylum sheet 3mm thick with machine screw and washers including cutting for switch/socket suitable for 6"x4" sunken box complete all as specified and directed

Supply and fix in replacement of hylum sheet 3mm thick with machine screw and washers including cutting for switch/socket suitable for 6"x 6" sunken box complete all as specified and directed

Supply and fix in replacement of hylum sheet 3mm thick with machine screw and washers including cutting for switch/socket suitable for 6"x 8" sunken box complete all as specified and directed

Supply and fix in replacement of hylum sheet 3mm thick with machine screw and washers including cutting for switch/socket suitable for 8"x 8" sunken box complete all as specified and directed

Supply and fix in replacement of hylum sheet 3mm thick with machine screw and washers including cutting for switch/socket suitable for 10"x 8" sunken box complete all as specified and directed

Supply and fix in repair LED 25 watt recess mounted round downlight with aluminium die cast housing having cut out dia 157 mm & height 87mm or suitable to existing dia at a height of 12 mtr approx . CCT -4000k/6000k complete all as specified. Make- jaguar Cat No LESP01R025XN (Ensave) or equivalent in Appx 'C'.

Supply and fix in repair LED 06 watt recess mounted round downlight with aluminium die cast housing having cut out dia 107 mm & height 20mm or suitable to existing dia, CCT -4000k/6000k complete all as specified. Make- Jaguar Cat No LNEP01R006XW or equivalent in Appx 'C'.

Supply and fix in repair wall bracket mounted decorative light fitting of 1x100w GSL with IP -20, power coated housing with milky glass suaitable for LED lmp of 14 watts complete all as specified. Make- Halonix Cat No HHW049 100GL or equivalent in Appx 'C'.

Supply and fix in repair 230 volt 4/5 watt LED candle lamp Warm white with big threaded holder complete all as specified and directed.

Supply and fix in repair 230 volt 4/5 watt LED candle lamp warm white with small threaded holdercomplete all as specified and directed.

Supply and fix in repair Indication room light (bell type 4 to 8) Nos (as per sample) controlled by (4 to 8) bell switches complete all as specified and directed.

Supply and fix in repair LED bed side fitting flexible type 3 watt complete all as specified and directed.

Supply and fix in repair 230 volt 7/9 watt LED lamp big threaded cool day light with big threaded lamp holder complete all as specified and directed.

Supply and fix in repair surface mounted LED porch down light in engineering plastic housing with clear prismatic diffuser 9 watt capacity white light complete all as specified and directed.

Material and labour LED pannel Recess mounted -2'x2' - 36 watts cool day light fitting with heat exchanger unit, LED driver, surge protection complete including cutting hole of required size in POP/false ceiling making good disturbed including taking down any type ceiling fitting complee all as specified and directed.Make- Polycab (Cat Part No. PMD0405005) or equivalent in Havells/C&S/Surya.

Material and labour LED pannel Recess mounted -2'x2' - 36 watts warm white light fitting with heat exchanger unit, LED driver, surge protection complete including cutting hole of required size in POP/false ceiling making good disturbed including taking down any type ceiling fitting complee all as specified and directed.Make- Polycab (Cat Part No. PMD0405005) or equivalent in Havells/C&S/Surya.

Supply & Fix in repair for LED luminaire ,36w , suitable for recess mounting LED ultra slim ceiling light with extruded aluminium housing with milky diffuser recess mounting ultra slim led 2'x2' panel and including with 36 watts recess mounted complete with drivers and other acessories as per manufacturer's recommendations and connections from ceiling rose complete , all as specified and directed. Make- Polycab (Cat Part No. PMD04001018) or equivalent in Havells/C&S/Surya.

Supply and fix in repairs surface mounting powder coated white CRCA full glow LED panel 45 watt capacity and size 2'X2' incl making all connections complete all as specified and directed.

Supply & Fix in repair for GI bracket made of GI pipe Medium Grade of size 40mm dia 1.5 mtr length bend to shape of 120 degre fixed o pole/wall with clamp of size 50x6 of suitable length fixed with nuts/ bolts and 1.5 mtere long 1.5 sqmm 2 core flexible wire from connector / ceiling rose to light fitting complete all as specified and directed.

Supply & Fix in repair for LED secuirty light 25 watt LED with lence and water/ weather proof powder coated high pressure dia cast housing with IP-66 built- in control driver, aluminium reflector, heat resistant toughened clear glass, connector bolck, surge protection with 25 watt LED lamp fixed on ceiling/pole/wall/ with fixing arrangement fixed with nuts bolts and 1.5 sqmm 3 core flexible wire from ceiling rose to light fitting complete including taking down old secrity fitting any type all as specified and directed as per complete. Make : C&S or equivalant of Havells/CG

Supply & Fix in repair for in renewal LED Driver suitable for LED panel Recess mounted, 2'x2', 36 watts light fitting to suit any make and making all necessary connections all as specified and directed .

Supply & Fix in repair white flexible/twisted copper cable two core 1.5 sqmm complete all as specified and directed

Supply and fix in repair track LED light with track accessories ( chanel min 1 mtr of 3 track lights etc) 15 watt Complete all as specified and directed.Make- Polycab (Cat Part No. PMD0701001) or equivalent in Havells/C&S/Surya.

R N Enterprises

Vasudeva Trading Co.

SINGARI ELECTRICAL WORKS

M/s Anil Kumar

M/S BALWINDER SINGH

Ess Ess Engineers