SPL REPAIR OF 01 X DINING HALL AND 03 X TRADESMAN SHOP (BLDG NO 108) OF ILP LOCATION OF EX 59 ENGR REGT UNDER AGE B/R-IV AND AGE E/M-II OF GE (SOUTH) MEERUT CANTT

Material and labour for cutting of existing GI pine 15mm dia and fixing Gi short piece , elbow, sockets complete all as specified and directed.

Taking down chowkhats or frame not exceeding 1.5 Sqm each with shutters without taking off shutters from the frame complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

Surface excavation not exceeding 30cm deep and averaging 15 deep and getting out in soft /loose soil. complete all as specified and directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors and frames/ chowkats; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe-410 or Fe-310 complete all as specified and directed.

Supply & fixing industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 32 Amps MCB, single pole, AC, 240 volts complete all as specified and directed.

Supply and fixing new ceiling fans complete with blades, down rods, electronic regulator and ccessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including taking down Old unserviceable ceiling fan of any sweep and deposited at MES store yard complete all as specified and directed.

S&F 3 mm thick, plain sheet glass ordinary quality and glazing with oil pane putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

M&L for 50mm thick PCC 1:2:4 type B-0 (12.5mm graded aggregate) as in sub base floor etc complete all as specified and directed.

Supply and fix desert cooler electric driven single phase 230 Volt metallic body (GI) medium, capacity of water not less than 67 Ltr , 1350 RPM and power consumption not more than 240 watt, 50 Hz, including taking down Old unserviceable desert cooler of any sweep and deposited at MES store yard complete all as specified and directed .

Per Point

Demolition of PCC in ground floors & pavings not exceeding 15 cm thickness (below or above ground level) (unreinforced) complete all as per specified and directed.

M&L Machine cut kota stone slab flooring 20 to 25mm thick over including 15mm thick cement screed base laid in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed.

Material & labour for provision of GI frame work(snap grid) suitable for size as in false ceiling of size 605mmx605mm consisting of followings and all as directed:-i) Aluminium sections incorporated in frame work shall conform to designation 63400 given in IS: 737-1986. ii) The snap grid shall consist of aluminium anodized main /cross tee of size 36.5mmx25mmx1.4mm thick and 25mm x 25m x1.4mm thick, respectively. iii) Snap grid frame shall be fixed to ceiling with and including supporting hangers consisting of 2mm to 4mm dia mild steel GI wire. iv) The main and cross tees shall be jointed at junction/crossings with aluminium anodized angle bracket, of size 15mmx15mmx1.5mm thick, fixed with suitable mild steel, bolts, nuts and washers all as per manufacturer’s instructions. v) The snap grid (main/cross tee section) shall be supported at ends all along the wall with aluminium anodized angle of size 25mmx25mmx1.4 m anodized m thick. vi) Size of the snap grid shall be 605mm by 605mm. vii) Minimum average thickness of anodizing shall be 50 micron complete all as specified and directed.

S&F 25 mm bore drapery curtain rods powder coated finished as directed with fancy type incl fixing brackets, stops, rollers etc complete all as specified and directed.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.

Each Set

all as specified and directed.

M&L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding / ridges, fixed with self tapping screws complete all as specified and specified.

S&F Steel windows box type using 'P' section comprising double frame for gauge and glazed skelton shutter jointly with flat iron 40x3mm complete including hinges, handle, tower bolts, stops, lugs etc of suitable size as directed by engineer-in-charge. Note (i) For the perpose of measurement & payment double shutter with frame shall be considered as one unit (ii) Unit rate quoted against this item shall also include the iron mongreries shown on drgs (iii) gaurd bars glazing & Wire mesh shall be measured and paid for separately complete all as specified and directed.

S & F MS work as in framed work for roof trusses purlin rafter fastning distance pieces cleats etc (including fixing independently vertical post) complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed.

M&L for complete removal of existing treatment and finishing of wall surface by using Birla white/JK wall care putty and applying two coats of cement base paints over a coat of primer in any colour complete all as specified and directed.

M&L for complete removal of existing treatment and finishing of wall surface by using Birla white/JK wall care putty and applying two coats of oil bound distemper (OBD) over a coat of primer in any colour complete all as specified and directed.

M&L for preparation of newly plastered surface of wall etc and applying birla/JK wall putty and two coat of oil bound distemper (OBD) over one coat of primer complete all as specified and directed.

All as per item No 31.00 here-in-before but except bricks.

S&F powdered coated aluminum window sliding type glazed or gauged of stainless steel wire cloth nominal dia of wire 0.56 mm and average width of aperture 1.18 mm along with aluminum grill 15 micron type DG-117 of make : Hindalco/Indalco/Jindal size of frame 125 mm x 44.5 mm of 18 gauge aluminum section with 15 micron anodizing size of shutter top bottom and side rail 44.5mm x 44.5 mm x 18 guage & 4.8 mm thick plain sheet glass to be fixed in glazed portion and stainless steel hooks & eye to be provided as stay of shutter etc complete including necessary jointing cleats glazing clips rubber packing anodized aluminum snap beading screws anodized aluminum fittings such as peg stay 150 mm long (01 No for each leaf) hinges type B-21 100 mm long (02 Nos for each leaf) suitable handle (01 No for each leaf ) and 100 mm aluminum tower bolt (2 Nos in each leaf ) complete all as specified and directed

S&F powder coated anodised aluminium Ventilators fixed type with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, with one or more rebates including S&F 5.50 mm thick tinted pin headed glass complete all as specified and directed.

S & F Solid PVC Door frame of size 50mm x 47mm made out of 5mm PVC sheet reinforced suitable for solid PVC door suppling & fixing in opening, complete all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

All as per item No 84.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 08 way, with 200 Amps rated . complete all as specified and directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 12 way, with 200 Amps rated . complete all as specified and directed.

Supply & fixing MCB SPN, AC, 240 volts of 63 Amps, C curve, 10 kA, complete all as specified and directed.

Material & labour for point wiring with FRLS PVC insulated 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, unsheathed copper conductor cable in existing PVC concealed conduit of size 20mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting / chases etc in walls, with 3mm thick plastic laminated sheet cover including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One Tube light/bulb/street light point controlled by one, one way switch 05 / 06 Amps.

Supply and fixing MCB SP, AC, 240 volts of 06 to 40 Amps, C curve, 10 kA, complete all as specified and directed.

Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 25 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty. complete all as specified and directed.

M&L for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over 25mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed. Note :- Sand cushioning shall be measured and paid separetely.

Supply & fix in repair vitrous china wash down water closet pan ( padestal pattern) , white ( excluding fixing bolts, flushing cistern ). Including white plastic seat cover for WC ( E.T ) white including MS CP or aluminium hinging device complete all as specified and directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s incl

Supply and fix Isolator TPN 415 volt 63 Amps 10 KA, 50 Hz.,complete all as specified and directed.

Supply and fixing sheet metal enclosure, Triple pole and neutral AC, 415 volts 25KA, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection including provision for four pole MCCB/mcb as incomer with metal double door and flush to wall including all cutting etc complete all a

s specified and directed.

S&F triple layer white color 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes complete all as specified and directed.

uding excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

Supply and fixing LED building security light fitting 1x35 Watt luminaries with die cast aluminium housing comprising epoxy poweder coated enclosed with glass cover in frame with high power LED white lamp of capacity 35 watt including brackets of 32 mm dia GI pipe medium grade upto 0.6 mtr long bend to required shape including flat iron clamps- 02 Nos with suitable size of nuts and bolts including grouted in wall complete all as specified and directed.

Supply and fix water heater storage type of capacity 25 ltr, five star rating, vertical type single phase 240 volt complete with all accessories. complete all as specified and directed.

Supply and fixing stop cock 15mm dia cast cooper alloy plated , screwed both end high pressure with handle complete all as specified and directed.

Sypply and fixing 15 mm dia unplasticised PVC pipe of pressure rating 10 kgf/ Sqcm fixed complete to wall , ceilings or in floor etc complete all as specified and directed.

Supply and fixing bib taps cast copper alloy with crutch handle screwed down, screwed for iron pipe and fixed. complete all as specified and directed.