Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹91.6 CrAdmitted-Finance | ₹91.6 Cr | L1 | Admitted-Finance |
| 2 | L2₹97.6 CrAdmitted-Finance 1 513 VIDHYADHAR NAGAR JAIPUR 302039 RAJASTHAN | JAIPUR | RAJASTHAN | 302039 | ₹97.6 Cr | L2 | Admitted-Finance |
| 3 | L3₹105.3 CrAdmitted-Finance | ₹105.3 Cr | L3 | Admitted-Finance |
| 4 | Rejected-Technical H NO 716 A 3 STREET BEHARI GANJ AJMER RAJASTHAN 305 001 | - | - | Rejected-Technical Technically Qualified |
| Sl No | Description | Qty | Unit | M/s Ramesh Kumar Bansal L1 | JCC INFRAPROJECTS PVT. LTD. L3 | LNA Infraprojects Pvt. Limited L2 |
|---|---|---|---|---|---|---|
| 1.00 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : i) Surface Preparation-The Concrete surface shall be cleaned thoroughly of all laitance, loose particles, dust, grease, etc. Thereafter pre-wetted to a saturated surface dried condition prior to holes/cracks, the same shall be repaired with cement putty using bonding agent Myk Arment SBR 35. ii) On the above surface, providing and applying first bonding coat of Single component polymer modified Myk Arment tuffcrete, ready to use, cement based waterproofing slurry by brush including posting the fibber net 45 gsm thick on junction. After drying the bonding coat provide and applying second coat of Myk Arment tuffcrete. iii) Finishing the above surface with 18-20mm thick plaster with cement-sand mortar (1:4) admixed with integral waterproofing compound conforming to IS: 2645. The plaster is to be applied after a minimum period of 24hrs. iv) Rounding off the junction with 50mm × 50mm fillet of cement mortar gola of mix 1:4 mixed with approved integral waterproofing compound conforming to IS: 2645 finished smooth with neat cement slurry. | 17,424 | Sqm | 250 ₹43.6 L | 455 ₹79.3 L | 531 ₹92.5 L |
| 2.00 | Providing and laying water proofing treatment to Peripheral gaps between pipes and excavated hole in R.C.C. slab/wall/beams to make the pvc pipe area rough by emery paper and applying a coat of myk rearm bond eba and sprinkle the coarse sand. Peripheral gaps between pipes and excavated hole to be filled with Non-Shrink Structural grout myk armgrout 65. | 2,981 | Each | 150 ₹4.5 L | 312 ₹9.3 L | 284 ₹8.5 L |
| 3.00 | Providing and laying water proofing treatment To joints in flooring, Treatment of Expansion joints 100 mm wide as per approved chemicals & specifications
1. Cleaning of the concrete surface on both side of the expansion joint to remove any dust, oil, grease including removal of laitance and cleaning of the inside of the expansion joint.
2. Repair the edges with polymer mortar.
3. Filling the joint with back up rod.
4. Applying first coat of epoxy adhesive on both side of joint in required width.
5. Providing & applying 300 mm x 1 mm Thermo plastic tape.
6. Applying IInd coat of epoxy adhesive on both sides of tape.
7. Supply & fixing of the 1mm thick aluminium plate 300 mm width for protection of expansion joint tape on horizontal & vertical surfaces, would be one side fix and having one side slot or both sides slotted as per application procedure and direction of Engineer-in-charge. | 198 | Rm | 1,800 ₹3.6 L | 3,901 ₹7.7 L | 3,000 ₹5.9 L |
| 4.00 | Providing and fixing 450 mm wide sheet covering over expansion joints with iron screws as per design to match the colour / shade of wall treatment. Aluminum fluted strips 2 mm thick | 1,065 | Rm | 980 ₹10.4 L | 585 ₹6.2 L | 970 ₹10.3 L |
| 5.00 | Providing and laying water proofing treatment To joints in flooring , as per drawing with first layer of poly sulphide sealant in size 50 mm width and 20 mm depth over PE Foam and
then providing polyethylene foam back up rod 60 mm dia size and finally
providing another layer of poly sulphide sealant in size 50 mm width and 20
mm depth over P.E. back up rod as per application procedure and direction of Engineer-in-charge. | 198 | Rm | 1,200 ₹2.4 L | 546 ₹1.1 L | 1,577 ₹3.1 L |
| 6.00 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades ceramic glazed vitrified tiles with water absortion less than or equal to 0.08% confirming to IS:13753 & IS : 15622 on walls, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). Size 600mm x 1200mm | 11,464 | Sqm | 873 ₹1.0 Cr | 821 ₹94.1 L | 1,434 ₹1.6 Cr |
| 7.00 | Providing and fixing in cement sand mortar 1 : 4 single paitam (rebated) Bijolia stone doors windows and ventilator frames of approved quarry :size 125x100 mm | 6,985 | Mtr | 325 ₹22.7 L | 469 ₹32.8 L | 984 ₹68.7 L |
| 8.00 | Providing and fixing in cement sand mortar 1 : 4 single paitam (rebated) Bijolia stone doors windows and ventilator frames of approved quarry : size 175x100 mm | 682.4 | Mtr | 425 ₹2.9 L | 852 ₹5.8 L | 1,239 ₹8.5 L |
| 9.00 | The surface to take the Waterproofing treatment should be cleaned thoroughly with wire brush, hair brush, blower machine to remove any dirt, dust, loose material from the surface. Doing INGECTION GROUTING on construction joint with CEMENT + C BAX 100 Open crack in V shape by grinder and fill them with SBR or cement. After all the above said treatments are completed on the surface. The substrate to be treated should be properly wetted before the Waterproofing application is undertaken care.
Apply first coat of Cemant+SBR. Apply Second coat of NET+ Cement +SBR on surface. Apply Third coat 2 component chemical. After 2 hours apply same coat again.
The Waterproofed surface should be left open for minimum 5 days to air cure | 154 | Sqm | 600 ₹92,400 | 455 ₹70,070 | 1,307 ₹2.0 L |
| 10.00 | Providing and fixing of swimming pool procelain tiles of size 50MM X 50MM of 5MM -6MM Thickness in Glass Mosaic Finish approved shade and design with required Epoxy adhesive over bed of Wall Plaster. including nicely finished joints. Thickness of joints shall not be more than
1.5mm using water proof joints filler Epoxy Based (as recommended by manufacture) & finished with flush pointing in white cement grout mixed with pigment to match the shade of tiles. Complete work as required in all respect. | 154 | Sqm | 2,000 ₹3.1 L | 2,466 ₹3.8 L | 5,387 ₹8.3 L |
Tender Value
₹106.5 Cr
EMD Value
₹2.1 Cr
Closing Date
28 Feb 2025, 6:00 pmClosed
ACE-I RHB
Additional Chief Engineer-I Rajasthan Housing Board Janpath Jyoti Nagar Jaipur
Construction of MNIT Faculty Residency Scheme 124 Nos. (HIG-I-50 Nos., HIG-II-50 Nos., HIG-III-12 Nos. and HIG-IV-12 Nos.) flats under SFS at Sector 26, Pratap Nagar, Jaipur
2024_RHBCE_437578_1
ACE-I_11/2024-25
Open Tender
Civil Works
630 days
Jaipur
Please refer Tender documents.
3 documents required · 3 mandatory
₹5,900
As per NIT
₹2.1 Cr
Yes
Jaipur
16 Apr 2025
16 Dec 2024
5 Mar 2025
16 Dec 2024
28 Feb 2025
16 Dec 2024
26 Dec 2024
Amount
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : i) Surface Preparation-The Concrete surface shall be cleaned thoroughly of all laitance, loose particles, dust, grease, etc. Thereafter pre-wetted to a saturated surface dried condition prior to holes/cracks, the same shall be repaired with cement putty using bonding agent Myk Arment SBR 35. ii) On the above surface, providing and applying first bonding coat of Single component polymer modified Myk Arment tuffcrete, ready to use, cement based waterproofing slurry by brush including posting the fibber net 45 gsm thick on junction. After drying the bonding coat provide and applying second coat of Myk Arment tuffcrete. iii) Finishing the above surface with 18-20mm thick plaster with cement-sand mortar (1:4) admixed with integral waterproofing compound conforming to IS: 2645. The plaster is to be applied after a minimum period of 24hrs. iv) Rounding off the junction with 50mm × 50mm fillet of cement mortar gola of mix 1:4 mixed with approved integral waterproofing compound conforming to IS: 2645 finished smooth with neat cement slurry.
Providing and laying water proofing treatment to Peripheral gaps between pipes and excavated hole in R.C.C. slab/wall/beams to make the pvc pipe area rough by emery paper and applying a coat of myk rearm bond eba and sprinkle the coarse sand. Peripheral gaps between pipes and excavated hole to be filled with Non-Shrink Structural grout myk armgrout 65.
Providing and laying water proofing treatment To joints in flooring, Treatment of Expansion joints 100 mm wide as per approved chemicals & specifications 1. Cleaning of the concrete surface on both side of the expansion joint to remove any dust, oil, grease including removal of laitance and cleaning of the inside of the expansion joint. 2. Repair the edges with polymer mortar. 3. Filling the joint with back up rod. 4. Applying first coat of epoxy adhesive on both side of joint in required width. 5. Providing & applying 300 mm x 1 mm Thermo plastic tape. 6. Applying IInd coat of epoxy adhesive on both sides of tape. 7. Supply & fixing of the 1mm thick aluminium plate 300 mm width for protection of expansion joint tape on horizontal & vertical surfaces, would be one side fix and having one side slot or both sides slotted as per application procedure and direction of Engineer-in-charge.
Providing and fixing 450 mm wide sheet covering over expansion joints with iron screws as per design to match the colour / shade of wall treatment. Aluminum fluted strips 2 mm thick
Providing and laying water proofing treatment To joints in flooring , as per drawing with first layer of poly sulphide sealant in size 50 mm width and 20 mm depth over PE Foam and then providing polyethylene foam back up rod 60 mm dia size and finally providing another layer of poly sulphide sealant in size 50 mm width and 20 mm depth over P.E. back up rod as per application procedure and direction of Engineer-in-charge.
Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades ceramic glazed vitrified tiles with water absortion less than or equal to 0.08% confirming to IS:13753 & IS : 15622 on walls, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). Size 600mm x 1200mm
Providing and fixing in cement sand mortar 1 : 4 single paitam (rebated) Bijolia stone doors windows and ventilator frames of approved quarry :size 125x100 mm
Providing and fixing in cement sand mortar 1 : 4 single paitam (rebated) Bijolia stone doors windows and ventilator frames of approved quarry : size 175x100 mm
The surface to take the Waterproofing treatment should be cleaned thoroughly with wire brush, hair brush, blower machine to remove any dirt, dust, loose material from the surface. Doing INGECTION GROUTING on construction joint with CEMENT + C BAX 100 Open crack in V shape by grinder and fill them with SBR or cement. After all the above said treatments are completed on the surface. The substrate to be treated should be properly wetted before the Waterproofing application is undertaken care. Apply first coat of Cemant+SBR. Apply Second coat of NET+ Cement +SBR on surface. Apply Third coat 2 component chemical. After 2 hours apply same coat again. The Waterproofed surface should be left open for minimum 5 days to air cure
Providing and fixing of swimming pool procelain tiles of size 50MM X 50MM of 5MM -6MM Thickness in Glass Mosaic Finish approved shade and design with required Epoxy adhesive over bed of Wall Plaster. including nicely finished joints. Thickness of joints shall not be more than 1.5mm using water proof joints filler Epoxy Based (as recommended by manufacture) & finished with flush pointing in white cement grout mixed with pigment to match the shade of tiles. Complete work as required in all respect.
Providing and fixing ceramic MAT finish tiles with water absortion less than or equal to 0.08% confirming to IS:13753 & IS : 15622 on walls, floor etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls). Size 200mm x 600mm
Supply of High Intensity Retro Reflecting Type XI Class C Sign Plate made out of 2mm thick aluminium sheet face to be fully covered with blue/ green high intensity grade recto reflective sheet and logo/ letters, borders made of similar type of white sheeting after anodizing treatment of aluminium sheet, the back side is to be painted with epoxy grey paint, the plate is to be fix on 40x40x5 mm angle iron frame with the help of aluminium rebates
Providing and fixin Parallel threaded couplers conforming to IS code on "Rrinforcement Couplers fot Mechanical Splices of Bars for Concerete Reinforcement - Specification" to reinforcement bars including threading enlargement at connection by forging protectingg the prepared reinforcement bars and related operations as required to complete the works per direction of Engineer-in-Charge.
Coupler for 16 mm Dia Reinforcement Bar
Coupler for 20 mm Dia Reinforcement Bar
Coupler for 25 mm Dia Reinforcement Bar
Coupler for 32 mm Dia Reinforcement Bar
P & F Kitchen Double bowl Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor : 1.0 mm thick Salem stainless steel AISI -304 kitchen sink of approved make (Nirali, Neel – kanth,Cera) with large waste coupling. Overall size 1065 x510 x 200 mm Depth (Both Bowl size 460 x 405 x 200mm)
Providing and fixing pressure reducing valve for inlet pressure 4-6 kg with flow rate depicted 24 to 27 litre per minute. 40 mm dia
Providing and fixing pressure reducing valve for inlet pressure 4-6 kg with flow rate depicted 24 to 27 litre per minute. 32 mm dia
Providing & fixing S.S. 304 Grade Auto Close Floor Drain With Size (127 X 127)mm, drainage dia should be 74 mm complete in all respet as per direction of engineer in charge
Providing & fixing S.S. 304 Grade Auto Close Shower Floor Drain With Size (100 X 900)mm, drainage dia should be 58 mm complete in all respet as per direction of engineer in charge
Providing Fibreglass sand filter, top mount, 900mm, 36"(2" Valve) Bobin Wound filter fiberglass reinforced polyester lining , corrosion resitance , ss nut bolts with cap , Abrasion resistance , Deforming proof with UV ressistance surface finish , equipped with 6 way valve and ABS lateral with pressure guage on MPV MAx Pressure 350 KPA , with drain plug for easy removing water , FLow rate of 30 M3 per hour , filetration area of .88 M2 Sand Filter TM 900MM BW Fibreglass sand filter, top mount, 900mm
Providing 2" Valve for top mount fibreglass sand filter. With 6 way valve positing for Filter , Backwash , Rinse , closed , Recirculate , waste options with 3 union 63 mm sight glass , drain plug , ss Pressure guage , with SS Nots and bolts .MPV SM 2"
Providing Filteration Pump, 2HP/1.5KW (S) Series 2 working 1 stand by pump Self Prming Pump , Injectuion moulding with thermoplastic pump casing , filter basket in white color injected plastic material , Prefilter lid in trasnperent polycarbonate , stainless Steel Studds , Impeller and seal mounting in PPO , Motor shaft in SS AISI420 , Mechnaical sean in SIC , Motur housing in aluminium L2521 , Cooper winding , IP 55 protection , class F insulation , Single phase motor with built in thermal protection.Filteration Pump, 2HP/1.5KW (S)
Providing 6 mm Granular media 20 KG BAG , The aspectic properties and the anti compaction technology of nature works ,Absence of free silica as bureau veritas certified , absence of bio films , Extrem durability , min energy , chemical amd water consuption , high quality filteration negligilble loss of pressure , Glass Filter Media
Providing Bottom Inlet for pool with 50 mm & 2Inch Ext made of high quality white ABS flow rate of 3 m3P/H Floor Inlet 50MM Int 2" Ext
Providing suction inlet at the bottom of the pool
Providing Circular ABS Main Drain for Pool 300mm in Diameter & 2" int. tr made of high quality white ABS with top ABS grill with SS Screw with rubber gaset up.
Providing & Fixing stainless Steel 304 ladder in miror finish with SS screws and bolts with anchor cup and rubber stopper with SS steps . 4-Step with S.S. Steps (Anchor Type)
Providing swimming pool vaccum head for cleaning pool floor and wall Vac Head PL 14" Wh&BL Flexible Vac Head W/ Swivel&EZ-Clip Vac Head PL 14
Providing 18" Aluminum Back Wall Brush w/ Poly Bristles (Blue & Silver Color) Brush Alu 18" Poly
Providing leaf net for pool Deluxe New Designated Deep Rake , AUSTRALIAN QUALITY
Providing leaf RAKE for pool Deluxe New Designed Leaf Rake (BW) Australian Quality
Providing & fixing Vacuum hose pipe for pool pump having dia 38mm Vac Hose EVA 15MTR 38MM 15 mtr Vac Hose, EVA, with standard cufff link,
Providing telescopic pool for swimming pool Telescopic Pole 2 Sec. 12- 24 Ft Telescopic Pole 2 Section w/ Easy Lock Device, 12'-24'
Providing test kit for chlorine and Ph valve Test Kit Cl/Ph Test Kit for Chlorine and Ph 1/2 oz Box Set
Providing and fixing grating pin having 300mm width Grating 1Pin 10" D2 (MII) 1 PIN 10 INCH GRATING OFF WHITE COLOR
1) Plumbing work for swimminpool lines in swimming pool and upto plant room 2) Electrical works for swimming pool up to plant room with all cbaling and conduiting 3) consultancy for swimming pool , balance tank , filteration room works 4) Intallation of all the items required in swimming pool/ Testing of entrice pipeline pressure testing and filter plant testing / Commissioning of plant room and handover / Training to local staff for operation and maintenance for filter motor light chemical adding and swimming pool daily cleaning operation and procedure .
Plumbing pipes in grey PVC 110MM/90MM/75 mm / 63 MM / 50 MM with all 10 kg and required 6 Kg fittings some places Prince / Supreme or equivalent. Electrical items including wires and cables with conduiting for all the above lights and pumps with required Brand Havells / Finolex or Equivalant . Control panel with amps Meter MCB , ELCB , light with phase indicator lamps mode as per above electrical item only.
Providing Wall Mounting Stainless Steel LED with blue rings and rubber gaskets Under Water Light`` with all water tight fittings and electric connectors , conduit and cable with trasnformer box 12v Watt from 220 v to 12 v , protection IP 68 under water .Light LED 18W/12V Wall Mount CW SS
Providing and placing overflow gutter drain for swimming pool Overflow gutter drain 63 mm
Proving and transporting to site various chemicals required for cleaning of swimming pool Pool Clean Chemical
provinding various Chemicals for pool commissioning work required HCL Alum , Flocullant , TCCA ,copper Sulphate or other required chemicals
Providing and fixing of Heavy PVC Valves in Size 110MM/90MM/63MM as required for Balalncing Tank and filteration Unit Prince/Supreme/equivalent make .
Providing and fixing of NRV for Main line of MS /CI Flanged Type having Brass Boll snadwiched b/w flanges in screw type with required fiitng as Sockets and gaskets.
Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 20 amp. Switch and socket outlet , making connection , testing , etc. as required.
P/F 5MP VF Bullet Camera -1/2.8" Progressive 60 fps@1920x1080,0.35 Cmos ,lux 1920x1080(2MP), @F1.4(Color),<0.005 [email protected](B/W),0 Lux With IR illumination On, H.265,3 Video Streams, 8 Configurabel Profile, IK10, IP 67/66, NEMA- 4X ONVIF (PROFILE S, PROFILE G PROFILE T), f= 2.7~13.5 mm, Motorized Vari-Focal, Remote Focus, P=Iris Lens ,3D DNR,120db Wdr,SNV,Scheduled Profile Settings, AE Speed Abjustment,EIS,Scene Mode,IR range Up to 50m,Support on-Board Storage up to 256GB (SD Card Not included), BLC, HLC, Defog, Alarm l/o Audio I/O, IEEE 802.1x, Password Protection, Secure boot, Signed firmware,brute Force attack Event Cyberattack event, quarantine,event,Ser access log user account Management, Five Winodow Video Motion detection,people detection, vehicle detection, Time filter, Edge Anlalytics Line Crossion, intrusion detection, Region entrance detection region exiting detection, unattended baggage detection, object, removal detection Smart Motion detection, face detection,crowd detection,crowd detection,running detection, UL, CE, Fcc, Bis Certified. Make Hi-Focus, Dahua, CP Plus, UNV, Hikvision or equivalent as per instruction of Engineer In Charge.
P/F 5MP 25X Optical Zoom, Smart IR, upto 150m (492 ft.) IR distance, Optical Glass window with higher light transmittance, IR anti-reflection window to increase the infrared transmittance, H.265/H.264/MJPEG video compression, Embedded smart Onvif algorithm, Triple Streams, Customized OSD, Conformance, More effective heat dissipation system, Intelligent temperature control technology. Minium illumination: Color 0.005 lux (F.15, AGC ON) 0 Lux with IRAuto/Manual; F1.6 -F4.4 Make Hi-Focus, Dahua, CP Plus, UNV, Hikvision or equivalent as per instruction of Engineer In Charge.
Supply & Installation of 8 Port Network Switch Gigabit POE: 16 × gigabit PoE ports, 1 × gigabit RJ45 port, and 1 × gigabit SFP fiber optical port, IEEE 802.3at/af standard
Supply & Installation of 4 Port Network Switch Gigabit POE: 8 × Gigabit PoE ports, 1 × Gigabit RJ45 port, and 1 × Gigabit SFP fiber optical port, IEEE 802.3at/af standard.
Providing & laying Upto 3 km wireless transmission distance 150 Mbps 802.11n wireless, Built-in 12 dBi high gain antenna, Point to Point, Point to Multipoint, Passive PoE power supply for easy installation." Make Tenda, IP-Com, Hikvision or equivalent as per instruction of Engineer In Charge.
Providing & fixing 16 port deliver upto 1000 Mbps of dedicated, non-blocking bandwidth per port, Instant Plug-N-Play connectivity with Auto- negotiation and auto MDI/MDI-X, 802.1p QoS support for prioritizing voice and video in the network, Jumbo Frame Support upto 9 KB Make Tenda, Netgear, Hikvision or equivalent as per instruction of Engineer In Charge.
POE Rack PVC Make
Providing & fixing 9 U rack cabinet 19", wall-mounted, glass door, 470x600x450 mm Make D-Link, Digisole, Com or equivalent as per instruction of Engineer In Charge.
Providing & fixing Surveillance Hard Disk 6TB Make WD, Toshiba, Seagate or equivalent as per instruction od Engineer in Charge
SITC of 50'4K, HDMI 2, VGA 1, USB.0, USB3.0, build-in Speaker, View Angle 178'178' Plastic Casing, VESA, 7*24h Make Sony or equivalent as per instruction of Engineer In Charge.
Scope for Installation Complete Supply, Installation, Configuration, Testing and Commissioning of all the delivered Equipment with All Accessories Complete
Supply, Testing of Long Distance 10 mtr UHF RFID Card Reader Make : HID/Triko/Secureye/FAAC
Providing & Fixing Stand for Mounting RFID Reader
Supply of RFID card Tag (Compatible with UHF reader ) Make : HID/Triko/Secureye/FAAC
Supplying, Installation, Testing and Commissioning of dust, damp and vermin proof free floor standing factory built sheet steel enclosed non-drawout modular firefighting panel, fabricated out of suitable sized square tubular section and covered with 2.0mm thick CRCA sheet, hinged doors of 2mm thick CRCA sheet, duly painted complete with Aluminium bus bars, inter-connection with copper conductor FRLS wires / aluminium strips, neutral links, earth bus etc. necessary metering protections & indications and mounted with the following as per specification attached as required.
INCOMING
400Amp. TPN, MCCB 50 kA rating with thermal magnetic release, ON indications - 1 set.
Four strip 600 Amps. Aluminium bus bar - 1 Set
Coloured LED (Red, Yellow, Blue) phase indicating lamp with control MCB's - 3Nos.
OUTGOING
250A, 3P , 35kA, MCCB along with CT operated Ammeters (0-250A), set of 3 CTs of 250A/ 5A, 10VA burden, 1.0 accuracy, ASS and coloured LED type (RED, GREEN) ON/OFF indication - 2 No\.
63A, 3P, 35kA MCCB along with CT operated Ammeter (0-60A), set of 3 CTs of 60A/ 5A, 5VA, ASS and coloured LED type (RED, GREEN) ON/OFF indication - 1 No.
16A, DP MCB - 1 No.
32A, TP MCB - 1 No.
DIESEL ENGINE FIRE PUMP SECTION
Set of control system components such as Aux. Switch , electronic relays,timers, contractors ,triping relays, rotary switches for AC ON /DC ON etc. to make the equipment automatic as per functional requirements.
Necessary alarms, visual indicator etc.
CONTROL PANEL SECTION
Colour coded internal wiring and connections etc. with suitable size of Fire retardent, low smoke PVC insulated copper wire / Aluminium Bus bar from incoming to bus bar, switch gears, starters, meters, indicating lamps, interlocking with Diesel pump set panel etc. complete as reqd. : 1 Set
Providing visual indicator & audible Hooter /Siren with a range of 1 KM including wiring and interconnection etc. : 1 No.
Lock out indication for electric fire pump as well as audio alarm with silencing facility.
Manual resetting push button for return to normal operation of locked out unit as reqd.
Terminal facility for repeat indicator of various audio and visual indications.
Fire panel as above
Bidder Name
Amount
M/s Ramesh Kumar Bansal (GSTN-08ABTPB6020F1ZV) BID ID -3044001
JCC INFRAPROJECTS PVT. LTD. (GSTN-08AADCJ2597D1ZI) BID ID -3079924
LNA Infraprojects Pvt. Limited (GSTN-08AADCL1585B1ZQ) BID ID -3083364
JCC INFRAPROJECTS PVT. LTD. (BID ID -3079924)
LNA Infraprojects Pvt. Limited (BID ID -3083364)
LNA Infraprojects Pvt. Limited (BID ID -3083364)
JCC INFRAPROJECTS PVT. LTD. (BID ID -3079924)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.75 MB
hsgs.pdf
Tender Documents • 0.55 MB
cagr.pdf
Tender Documents • 2.54 MB
tbid.pdf
Tender Documents • 9.64 MB
BOQ_786475.xls
BOQ • 0.30 MB
BOQ.xls
BOQ • 0.30 MB
Tenderdocument.pdf
Tender Documents • 0.55 MB
Tenderdocument_2.pdf
Tender Documents • 9.64 MB
Tenderdocument_3.pdf
Tender Documents • 2.54 MB
Download all tender documents and submit your bid