SPECIAL REPAIRS TO FLOORING AND INTERNAL WIRING OF DAD QTRS PHASE I AT WELLINGTON UNDER GE WELLINGTON

Amount

Dismantling, floor hearth or wall tiling including cement mortar bedding complete all as specified and as directed.

Demolition of Cement Concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

25mm thick Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floor all as specified and directed.

Coloured Non - skid Ceramic joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in dado/ Skirting etc. and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Taking down Shutter of any description exceeding. 1 sqm and not exceeding 2 sqm and refixing in the same opening each all as specified and directed.

Taking down chowkat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each all as specified and directed.

2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue, pinned at joint all as specified and as directed.

Second class HW plain, framed, panelled shutters 35mm thick (any No of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats all as specified and directed.

Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

Butt hinges, 100 mm size medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

Extruded aluminium alloy handles 150 mm size, fabricated type, anodised complete all as specified and as directed

250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section 150 mm long for door / window all as specified and directed.

Floor door stopper of aluminium alloy body 150mm and tongue, anodised with hard drawn steel spring fixed in floor all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick / concrete / RR masonry surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed.

Preparation of old plastered surface and applying two coats of oil bound distemper over one coat of primer including one coat of putty 1mm thick on wall complete all as specified and directed.

Preparation of newly plastered wall surfaces and applying two coats of Oil Bound Distemper over one coat of primer over and including a coat of putty 1mm thick and all as specified and directed.

Preparation of old treated wall surfaces, cornices etc by brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and treating oil and greasy spots etc and applying one coat of white wash complete all as specified and as directed.

Preparation of old treated ceiling surfaces, cornices etc by brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and treating oil and greasy spots etc and applying One coat of white wash complete all as specified and directed.

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell etc, and making good disturbed surfaces with smooth finish matching with the existing surface of walls, floors, etc. and with existing colour all as specified and directed.

Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in and including PVC casing and caping complete with fittings/ accessories with provn of 1.2 mm thick MS/PVC terminal boxes of suitable size and for housing of switches, sockets etc including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light /Ex-fan point controlled by one switch 5Amps SP all as specified and directed.

All as per Item No.23 hereinbefore but One 3 pin 5A switch socket outlet on independent Board all as specified and directed.

All as per Item No 23 hereinbefore but One 3 pin 5A Socket outlet on same board complete all as specified and directed

All as per Item No 23 hereinbefore but point wiring complete with 2.5 sqmm FRLS cable for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

Bell push flush type 5 A all as specified and directed.

Ceiling rose, 3 terminals PVC / polycarbonate, isolated body all as specified and directed.

Modular switch one way 6A 230V AC 50 HZ SP one module all as specified and directed.

Modular switch one way 16A 230V AC 50 HZ SP one module all as specified and directed.

Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified and directed.

Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module all as specified and directed.

Modular Bell push 6A 230V, AC 50 Hz SP One module all as specified and directed.

Modular White cover plate with frame of 3 module all as specified and directed.

Modular White cover plate with frame of 4 module all as specified and directed.

Modular White cover plate with frame of 6 module all as specified and directed.

Taking down unserviceable DBs with MCBs and Supply and fix MCB DB SPN 8 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed.

MCB SP 230V 6-32 Amps 'C' series capacity all as specified and directed.

MCB TPN 40 Amps, 440 volts capacity complete all as specified and directed.

Taking down Submain wiring with aluminium conductor along with PVC Conduit and Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed. Note: 3 runs of cable and one run of conduit pipe together measured as one RM

Taking down unserviceable DBs with MCBs and Supply and fix MCB DB TPN 4 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed.

sree devi construction

GUNASEKARAN AND CO

LAKSHMI ELECTRICAL ENTERPRISES

St George Engineering Works

KENZ CONSTRUCTIONS