Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.7 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹29.8 L+₹82,923.60 (2.86%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹30.2 L+₹1.2 L (4.17%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹32.9 L+₹3.9 L (13.4%)Rejected-Finance | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹33.8 L+₹4.8 L (16.5%)Rejected-Finance | L5 | Rejected-Finance Being L5 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
13 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Allahabad
Stanley Road, Teliyarganj, Allahabad
SPL REPAIR TO CERTAIN BLDG IN SARASWATI VIHAR AND CERTAIN MINOR WORKS AT FORT CANTT AND OLD CANTT ALLAHABAD UNDER GE (EAST) ALLAHABAD.
2022_MES_551817_1
8597/E8
Open Tender
Civil Works
Item Rate
180 days
Allahabad
As Per NIT
8 documents required · 8 mandatory
₹500
Yes
GE (East) Allahabad
₹80,000
Yes
9 Dec 2022
14 Sept 2022
15 Oct 2022
14 Sept 2022
13 Oct 2022
29 Sept 2022
14 Sept 2022 - 21 Sept 2022
60 days
Amount
Demolition of reinforced cement concrete as in chajja and similar suspended works, complete all as specified and directed.
Taking down cement plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water including removing of all rubbish off from the site, complete all as specified and directed.
Taking up or down 15mm bore, steel tubing and connections, , including cleaning for refixing or removal to store, complete all as specified and directed.
GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 15mm bore of pipe, complete all as specified and directed.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed wate tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed.
Taking up or down 20mm bore, steel tubing and connections, , including cleaning for refixing or removal to store, complete all as specified and directed.
GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 20mm bore of pipe, complete all as specified and directed.
Taking up or down 25mm bore, steel tubing and connections, , including cleaning for refixing or removal to store, complete all as specified and directed.
GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 25mm bore of pipe, complete all as specified and directed.
Precast reinforced cement concrete as in cover slabs (for manholes) chullah hoods, chajjas, water trough, mangers, shelves and other similar works, type B-1, 1:2:4 using 20 mm graded agg. set in cement mortar 1:4, complete all as specified and directed. Note: Reinforcement to be measured and paid separately.
Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.
Brickwork with flyash bricks, old size straight or curved on plan exceeding 6 metre mean radius, built in CM 1:6, complete all as specified and directed.
Brickwork with flyash bricks, old size straight or curved on plan exceeding 6 metre mean radius, built in CM 1:6, complete all as specified and directed. [Except brick]
Brickwork with flyash bricks, old size straight or curved on plan to any radius in half brick walls, built in CM 1:4, complete all as specified and directed.
TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
Dismantling Bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) laid and bedded pointed in cement mortar, complete all as specified and directed.
Demolition of mud/lime concrete in roofs, any thickness, including plastering, old water proofing membrane and and leeping including brick/brick tiles (whether full thickness removed or only a part thereof) and removing the rubbish from site for distance exc 250m but not exc 500m, complete all as specified & directed.
Plain cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate), 50mm thick, as in floor/ padding and finishing the surface fair and even, complete all as specified and directed.
Preparation of cement concrete surface by providing 10 mm thick modified plaster in CM 1:4, cement mixed with polymer in ratio of 1:10 (1 part of polymer and 10 parts of cement), applying primer coat of epoxy primer with resin and hardener with water dilution as per manufactirer instructions, applying two coats of polyurethane liquid membrane each coat not less than 500 micron thick, UV stable having SRI value equal or greater than 105 with consumption of 0.61 Kg/ Sqm (each coat), complete all as specified and directed. Note : Second coat should be applied once first coat is fully dried. Make of material : Asian paints or equivalent as approved.
Cement concrete tiles 250 mm x 250 mm x 25mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors with grey cement and no pigments with and including provision of 15mm thick screed bed in CM 1:4 for laying of tiles, complete all as specified and directed..
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store, removing rubbish off the premises, complete all as specified and directed.
Non - skid Ceramic, coloured tiles 7 to 8 mm thick, size of each tile shall be 400mm x 400mm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including provision of 15 mm thick screed bed in CM 1:6, complete all as specified and directed.
Non - skid Ceramic, coloured tiles 7 to 8 mm thick, size of each tile shall be 600mm x 600mm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including provision of 15 mm thick screed bed in CM 1:6, complete all as specified and directed.
Non - skid Ceramic, coloured tiles 7 to 8 mm thick, size of each tile shall be 400mm x 400mm, as in vertical surfaces such as skirting/ dado and risers to steps, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including provision of 10 mm thick screed bed in CM 1:3, complete all as specified and directed.
Glazed ceramic coloured tiles as in vertical surface of walls such as skirting / dado and risers to steps, size of tile shall be 450 mm x 300 mm x 7 mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles, laid over and including provison of 10 mm thick rendering as in backing coat of tiles in cement mortar 1:4, complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded in any mortar, complete all as specified and directed.
Machine cut mirror polished Kota stone slab (in full length one piece) 18-20mm thick, as in landing, steps, flooring over and including 20 mm thick screed bed in cement mortar 1:4, laid and jointed in grey cement slurry mixed with pigment to match slab including rubbing and polishing mirror finish, complete all as specified and directed.
Machine cut mirror polished kota stone (in full length one piece) 18 to 20 mm thick over 10 mm thick bedding layer CM (1:3) in riser of steps, skirting, pillar etc laid and jointed in grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
Granite, 18 to 20mm thick, (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20 mm thick screed bed in CM 1:4, including rounded/ half rounded edges and hole for gas pipe in pre-cast slab, complete all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and othe similar situations, complete all as specified and directed.
Rendering 15mm thick in CM 1:4, mixed with water proofing compound, on fair faces of brick work or concrete surfaces of walls, finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.
Supply only liquid water proofing compound of approved make, complete all as specified and directed.
Rendering 10mm thick, on faces of brick work or concrete surfaces in cement mortar 1:6, finished surface even and fair, complete all as specified and directed.
Wall care putty, 1mm thick on new plastered internal surfaces, complete all as specified and directed.
Preparation of new plastered surfaces of walls and applying two coats of acrylic emulsion paint of approved colour over a coat of primer, complete all as specifed and directed.
Complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, filling depressions of scrapped surfaces with wall care putty including preparation of surfaces by rubbing with appropriate size of sand or emery paper and applying two coats of acrylic emulsion paint on walls surface, complete all as specified and directed.
Preparation of new plastered surfaces of walls and applying two coats of cement base paint of approved colour over a coat of alkali resistant primer, complete all as specifed and directed.
Complete removal of old decorated painted surfaces of wall including cornices, pilastered etc, by brooming down or steel wire brushing scrapping down smoke soot moulds , moss and efflorescent salts and trading oil and greasy sports and applying two coats of cement base paint (approved clour/shade) on wall surface over a coat of alkali resistant primer , complete all as specified and directed.
Rendering 5mm thick in CM 1:3 on concrete surfaces of ceilings, finishing the surface even and fair, complete all as specified and directed.
Preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white wash, complete all as specifed and directed.
Preparation of old plastered surfaces of ceilings and applying two coats of white wash, complete all as specifed and directed.
Taking down eaves gutter and rainwater pipes (any size and pattern), including all fittings, head shoes bends swan-necks, etc, incl cleaning for refixing or removal to store complete as specified & directed.
PVC (SWR) 75 mm bore pipes single socketed ends, in any length with rubber ring joints, laid in floors or trenches, complete all as specified and directed..
PVC (SWR) 110 mm bore pipes single socketed ends, in any length with rubber ring joints, laid in floors or trenches, complete all as specified and directed..
PVC (SWR) 110 mm bore pipes single socketed ends, in any length with rubber ring joints, fixed to walls, complete all as specified and directed..
PVC (SWR) 75 mm bore pipes single socketed ends, in any length with rubber ring joints, fixed to walls, complete all as specified and directed.. .
PVC (SWR) bends / shoe of any radius and 110mm bore, fixed in repair, complete all as specified and directed..
PVC (SWR) bends / shoe with access door of any radius and 75mm bore, fixed in repair, complete all as specified and directed..
PVC (SWR) bends / shoe of any radius and 75mm bore, fixed in repair, complete all as specified and directed..
PVC (SWR) 75 mm dia, junction single, (single T), equal or unequal with oval access door fixed to PVC pipe joint with rubber solvent, complete all as specified and directed.
PVC (SWR) 110 mm dia, junction single, (single T), equal or unequal with oval access door fixed to PVC pipe joint with rubber solvent, complete all as specified and directed.
PVC (SWR) vent cowl, 110mm bore, complete all as specified and directed..
PVC floor trap with grating, plain jointing with solvent cement, 75mm bore, complete all as specified and directed.
PVC (SWR) gully trap 110mm, setting and jointing with sovent cement, complete all as specified and directed.
Bib taps, cast copper alloy, chromium plated, long body fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore, fixed in repair, complete all as specified and directed.
Angular cock, 15mm bore, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes, fixed in repair, complete all as specified and directed.
Water closet squatting pan 'Orissa Pattern' of size 580 mm x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe) with P' or 'S' trap complete incl connection to trap and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor, fixed in repair, complete all as specified and directed.
PVC low level cistern, 10 litre capacity, white’ with inlet, float valve including bracket with 32mm dia PVC pipe 600 mm long, fixed in repair, complete all as specified and directed.
Stainless steel sink with drainage board, made out of 1.00mm thick sheet for kitchen with plug, washers waste pipe, cast iron cantilever brackets, including bedding in cement mortar to dwarf wall, connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm, fixed in repair, complete all as specified and directed.
Vitreous china wash hand basin white flat back of size 550mm x 400mm excluding chain, plug and porcelain stopper but including brackets and cutting for and pinning in ends of brackets, including waste coupling of 32mm size, fixed in repair, complete all as specified and directed.
Pillar taps, cast copper alloy, capstan head type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shank and fly-nuts, screwed for iron pipe 15mm bore, complete all as specified and directed.
Chromium plated brass shower rose 125 mm long, fancy type with swivel joints fixed to 15mm bore pipe, fixed in repair, complete all as specified and directed.
White colour triple layer, 500 litres capacity, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, fixed in repair, complete all as specified and directed.
Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, 20mm bore, fixed in repair, complete all as specified and directed.
PVC connection 15mm size with PTMT nuts on both ends of length 600mm, complete all as specified and directed..
Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for fixing of 110 mm pipe, complete all as specified and directed.
Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for fixing of 75 mm pipe, complete all as specified and directed.
Waste fittings, 32mm dia, brass, chromium plated for basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.
Waste fittings, 40mm dia, brass, chromium plated for basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.
Low density ployethene (LDPE) pipes of pressure rating 6 kgf/sqcm, 32mm bore, fixed to walls, ceilings or in floors, complete all as specified and directed.
Stainless steel plate rack / utensils rack of size 600mm x 750mm x 300mm depth made out ot 0.63mm thick stainlesss steel sheet, fixed to wall with brass scres including provision of necessary fittings / fixtures viz., nuts, bolts and washers of suitable size, the plate shall conform to the sample kept in sample room of AGE B/R Old Cantt, complete all as specified and directed.
Tubular towel rail brass chromium plated, 20mm dia, 'D' type, 600mm long, fixed with two plugs of second class hardwood embedded in CM 1:3., fixed in repair, complete all as specified and directed.
Fancy type drapery rod 20mm dia, stainless steel inlcuding end brackets and side brackets, fixed in repair, complete all as specified and directed.
Demolition of cement concrete (un reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level), complete all as specified and directed.
Plain cement concrete 1:2:4 type B-1 (20mm graded stone aggregate), 50mm thick, as in plinth protection, finishing the surface even and smooth without using extra cement, complete all as specified and directed.
Taking down chowkats or frames exceeding 1.5sq.m but not exceeding 4sq.m each with shutters (without taking off shutters from the frames) including removing from site, complete all as specified and directed.
Taking down chowkats or frames not exceeding 1.5sq.m each with shutters (without taking off shutters from the frames) including removing from site, complete all as specified and directed.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and directed.
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification, complete all as specified and directed.
Fabrication and fitting in repair of with cabinet/ shelves & wardrobe/ cupboard made out of 18mm thick PVC board plain colour & laminated sheet with piano hinges ( sheet shall be laminated over PVC board with solvent adhesive at external faces) including providing cabinet for keeping baskets, cutlery basket with handles/ door shutters, complete all as specified and directed. Note : PVC sheet fittings & fixtures will be measured and paid separately only.
Supply only 18mm thick solid PVC board one side prelam sheet colour (Celuca sheet) with suitable cement solvent adhesive for shutter / kitchen cabinet/cup boards/ partation walls/wall cabinet and similar, complete all as specified and directed.
Supply only 100mm size concealed hinges (stainless steel) with stainless steel hinge pin complete all as specified and directed.
Suppy only 75mm dia oval shape aluminium handle fancy type brass polished bright finish complete all as specified and directed.
Pressed steel frames for doors of size 105mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed, complete all as specified and directed.
Pressed steel frames for doors of size 125mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed, complete all as specified and directed.
Preparation of new steel primed surfaces over 10cm width or girth and applying two coats of synthetic enamel paint , complete all as specified and directed.
PCC type-B-1, 1:2:4 using 20mm graded stone aggregate as in Bed blocks or filling in door frames, including necessary formwork, complete all as specified and directed.
Flush shutters 32 mm thick, factory made, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
Glazed and skeleton shutters, 35mm thick, second class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), divided into squares with plain, chamfered or rounded mitered beads for securing glass/gauge complete all as specified in SSR Pt- I, section 8, clause 8.24(a) and as directed. Note: Glass or wire cloth, etc. in panels or sash squares shall be measured separately.
Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specifed and direcetd.
Aluminium alloy handles, fabricated type, anodised, 150mm long, complete all as specified and directed.
Aluminium anodised, barrel tower bolts of extruded section and fixed, 200mm long, complete all as specified and directed.
Aluminium anodised, barrel tower bolts of extruded section and fixed, 75mm long, complete all as specified and directed.
Aluminium anodised, barrel tower bolts of extruded section and fixed, 100mm long, complete all as specified and directed.
Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 250mm long, complete all as specified and directed.
Preparation of new steel and iron surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
Preparation of new wooden surfaces exc 10 cm width or girth with sand or emery paper & applying two coats of synthetic enamel paint over a coat of pink primer , complete all as specified and directed.
Butt hinges, cold rolled mild steel, medium weight, 100mm size, complete all as specified and directed.
Framed work such as grills, gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, and similar work conforming to Fe-290 Gde-E-165, complete all as specified and directed.
Sheet glass, 5.5 mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete as specified & directed.
Factory made uPVC white colour Sliding window Three track of area not exc 2.00 Sqm each made of extruded profiles with wall thickness of 2.3mm (+/- 0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2(+/- 0.2)mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories., complete all as specified an directed. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.
Floor door stopper, 140mm size, of stainless steel body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.
Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete, 300mm size, complete all as specified and directed.
Plain cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate), as in coping, coving, roof padding, padding in sunken slab using water proofing compound, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.
Polymer modified plaster 10mm thick in CM 1:4 mixing the polymer in the ratio of 1:10 (1 part of polymer & 10 parts of cement) for sides and base of sunken floor portion, complete all as specified and directed. Note:- Make of polymer Asian Paints/ Pidilite/ STP/ Thermax/ Sico
Plain cement concrete type F-2, 1:7:12 (using 40mm graded stone aggregate), as in mass concrete in sunken floors., complete all as specified and directed.
Providing damp-proof layer in 2 coats of acrylic polymer coating consisting of 1 part acrylic polymer mixed with 2 parts of cementitious powder applied at the rate of 1.4 sqm/kg of mix per coat, complete all as speciifed and directed. Note: (a) Second coat to be applied after 4-6 hours of first coat. (b) 5 days curing to be carried out to the surface before plastering. Make: 'Smart Care damp block 2K' of Asian Paints or equivalent of Dr Fixit, STP, CICA
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out any type of soil, complete all as specified and directed.
Removing of surplus excavated material to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed.
Hardcore, of broken stone or boulders, of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.
Plain cement concrete 1:3:6 type C-2 (40mm graded stone aggregate),75mm thick, as in sub base of floor , complete all as specified and directed.
Sand filling under floors or in foundations including watering and ramming, 25mm thick layer, complete all as specified and directed.
Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, complete all as specified and directed.
Plain cement concrete 1:3:6 type C-1 (20mm graded stone aggregate), as in sides of paver blocks as bounding, complete all as specified and directed.
Excavation in trenches not exceeding 1.5m deep and not exceeding 1.5m wide or area not exceeding 10 sq.m on plan and depth not exceeding 1.5 m for foundation, for shafts, wells, cesspits, manholes, pier holes etc., and getting out in any type of soil, complete all as specified and directed.
Plain cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate), as in mass concrete in foundation filling, complete all as specified and directed.
Damp proof course to horizontal or vertical surfaces, 40 mm thick, including necessary formwork in cement concrete 1:2:4, type B-0 (using 12.50mm stone aggregate) and applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cum per sqm, complete all as specified and directed.
Returning, filling in soils, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed.
Formwork to rough finished sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., complete all as specified and directed.
Mild steel TMT bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
RCC 1:2:4, type B-1, (nominal mix) using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed. Note: Reinforcement shall be measured and paid separately.
Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing incl necessary fixing arrangements as per specification and drawings, complete all as specified and directed.
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/sqmm, modulus of elasticity 850 N/sqmm and resistance to spread of flame of Class A category with property of being termite/ borer proof, water /moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and directed. Note: Stainless steel butt hinges and necessary S.S screws shall be measured and paid separately.
Powder coated aluminium ventilator top hung type with partly blind glazed and partly gauged without sash bar with stile and rail of size 45mm x 45mm x 1.8 mm thick including 4mm glass and necessary glazing clip, rubber packing with and including fittings Aluminium Tower bolt 200mm - 01 Nos and Aluminum stay- 01 No. complete all as specified and directed.
Brass barrel tower bolts, 150mm size, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.
Brass extruded tower bolt 100 mm size of extruded section, complete all as specified and directed.
Toughned glass, 10mm thick, as in hinged frameless door , partitions automatic doors and similar work including cutting to shape, drilling holes, mouliding of edge required, complete all as specified and directed.
Supply only CP/Stainless steel fixing accessories i.e Pivot, bottom patch, top patch, floor spring, 'H' type Handle patch lock, stainless steel tie rod, joint clip, transperent rubber seal gasket etc suitable for fixing of glass door shutter /partition complete all as specified and directed.
Vitreous china wash down water closet (pedestal pattern), 'P' or 'S' trap white with With PP Soft Close Seat Cover, Hinges, Fixing Accessories and Accessories Set, fixing seat cover including connection to drain (or outgoing pipe, and to flushing pipe & antisyphonage pipe etc) with aluminium hinging device complete all as specified and directed. Make Jaquar cat part No. CNS-WHT-551SSPP / CNS-WHT-551PSPP, or equivalent.
Vitreous china white large standard urinal with waste coupling and waste pipe (Urinal suitable for fixing push type auto closed angle valve), complete all as specified and directed. Make: Jaquar, CERA
CP angle valve auto closing system push type with built in control cock and wall flange type, complete all as specified and directed. Make: Jaquar cat Part No. PRS:077 or Prayag, Pearl
Vitreous china table top wash basin of size not less than 490 mm x 400 mm x 150mm white rectangular or any shaped excluding tap but including non skid rubber base complete all as specified and directed. Make :Jaquar, Cera
Bottle trap (with internal partition) 32mm size with 250mm and 190mm long wall connection pipe and wall flange, complete all as specified and directed. Make: Jaquar Cat part no. ALD-769L 250 x 190 or equivalent in approved make.
PVC valveless syphonic action type flushing cistern, 10 ltrs capacity, (top push button type), low level with inlet ball valve float and handle complete all as specified and directed. Make: Prayag, Jaquar, Cera
Central hole wash hand basin mixer (Luxury) with 450mm long coper pipes and brass nut complete all as specified and directed. Make : Jaquar cat part no. FLR 5169NB or Prayag, Pearl
Towel ring 200mm dia, Chromium plated, fixed in repair, complete all as specified and directed. MAKE:- Jaquar Cat No. ACCN-1121BN or techno-commercially equivalent model in Prayag or Cera.
Towel rack 600mm long, CP, with bottom hook, fixed in repair, complete all as specified and directed. Make: Jaquar Cat Part No: CAN-1181FHN or techno-commercially equivalent model in Prayag or Cera.
Stop / Angle valve, 15mm dia, fancy type, CP, with long shank and cup (concealed type) etc, fixed in repair, complete all as specified and directed. MAKE:- Jaquar Cat No. FLR-5053N or techno-commercially equivalent model in Prayag or Cera.
Toilet paper holder with stainless steel flap fixed to wall etc, complete all as specified and directed. MAKE:- Jaquar Cat No. CAN-1153S or techno-commercially equivalent model in Prayag or Cera.
Soap dish, fancy type, CP, fixed in repair, complete all as specified and directed. MAKE:- Jaquar Cat No. 1131N techno-commercially equivalent model in Prayag or Cera.
PVC connections 15mm size, of length 450mm, both ends having PTMT nuts, complete all as specified and directed.
Hand shower (Health faucet) with 8mm dia 1.20m long flexible tube and wall hook with NRV including fixing bracket, fixed in repair, complete all as specified and directed. MAKE:- Jaquar Cat No. ALD-577 or techno-commercially equivalent model in Prayag or Cera.
CP grating 100mm dia, fixed with coloured cement joint to match the existing surface of tile, complete all as speciifed and directed.
Frame less rounded edge, 6mm thick, area n exc 1 Sqm each pane in any shape fancy type looking mirror fix to wall with CP screw and decorative bolt, complete all as specied and directed.
Wall Mixer with provision for overhead shower with 115mm Long bent pipe on upper side, connecting legs & wall flanges fixed to 15 mm bore GI pipe complete all as specified and directed. Make: Jaquar Cat Part No. : FLR 5273 UPR or equivalent model in CERA, Prayag.
Waste coupling of PTMT (half or full threaded) 32 mm dia, complete all as specified and directed.
RCC M-15, using 20mm graded stone aggregate in foundation, including footing, foundation beams, plinth beams, bases for columns etc. complete all as specified and directed.
Taking down carefully point wiring of any type and any description / caping or concealed [light point, fan point or socket point] including removal of battens, pipes, plug sockets, switches, shades, ceiling roses, light fittings etc complete and making good disturbed surface to match the exisitng, complete all as specified and directed.
Taking down main switches, distribution boards and cut outs of any capacity along with the exisitng boards and removing the same from site and making good disturbed surface or portion of walls complete all as specified & directed.
Taking down carefully sub main wiring of any numbers of wire on wooden batten or surface conduit or concealed conduits / casing caping any type complete all as specified & directed.
Point wiring complete with PVC insulated unsheatehd, 1100 volts grade cable 1.5 sq.mm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories, including provision of concealed pressed steel terminal box of required size not less than 1.6 mm thick factory made duly painted inside and outside with two coats of black bituminous paint over and including a coat of red oxide primer, with 3.0 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc, including 1.5 sq.mm FRLS type PVC insulated unsheathed cable multi stranded copper conductor of green colour as continuous earth wire and connected to earth dolly as required at site and including chases cutting and making good the disturbed surface and applying finishes to match the existing surface, complete all as specified and directed for the following:-
(a) One light / fan / bell / exhaust fan point, controlled by one one-way 5Amp switch
(b) One 5 pin, 5 Amp socket outlet on the same board with other switches
(c) One 5 pin, 5 Amp socket outlet point on an independent board.
(d) One light point controlled by two two-way switch
(e) One bell point/ buzzer point controlled by one bell push
Point wiring complete with PVC insulated unsheatehd, 1100 volts grade cable 2.5 sq.mm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for socket outlet, 6 pin, 15 Amps including provision of concealed opressed steel terminal box of required size not less than 1.6 mm thick factory made duly painted inside and outside with two coats of black bituminous paint over and including a coat of red oxide primer, with 3.0 mm thick top cover of plastic lmainated sheet of required colour for mounting switch, sockets, fan regulator etc, including 2.5 sq.mm FRLS type PVC insulated unsheathed cable multi stranded copper conductor of green colour as continuous earth wire and connected to earth dolly as required at site and including chases cutting and making good the disturbed surface and applying finishes to match the existing surface, complete all as specified and directed.
Switch piano, flush type single pole, one way 5/6 Amp 240 volts, white or ivory, ISI marked, complete all as specified and directed.
Switch piano, flush type single pole, two way 5/6 Amp 240 volts, white or ivory, ISI marked, complete all as specified and directed.
Socket outlet, 2 in 1, 5 pin, 5/6 Amps 240 Volts, flush type, fixed in repairs, complete all as specified and directed.
Switch piano, single pole, one way 15 Amp 240 volts, ISI marked, complete all as specified and directed.
Socket outlet, 2 in 1, 6 pin, 15 Amps 240 Volts, flush type, fixed in repairs, complete all as specified and directed.
Ceiling rose, single phase, PVC / polycarbonate, insulated body, three terminals, surface bakelite sheet 63.5mm dia, fixed in repairs, complete all as specified and directed.
Lamp holder, PVC/polycarbonate body with back plate/ cord grip cap suitable for batten/ angle/ pendent fittings, fixed in repairs complete all as specified and directed.
Switches, one way, bell push, flush type, 5 amp, fixed in repairs, complete all as specified and directed.
Electric bell ding dong type AC 230 Volt 50 hz single pole, ISI marked, fixed in repair, complete all as specified and directed.
Stepped type electronic fan regulator flush type duly fixed on the existing phenolic laminated sheet etc. as required, 240V, humming free, 2 module, ISI marked, complete all as specified and directed.
Sheet metal enclosure for MCB DBs SPN, 8 way, double door, vertical type, 240 V with 200 Amps rated bus bar, complete with incoming/ outgoing connection through proper size of lugs and cable glands, fixed in repair, complete all as specified and directed.
Sheet metal enclosure for MCB DBs SPN, 4 way, double door, vertical type, 240 V with 200 Amps rated bus bar, complete with incoming/ outgoing connection through proper size of lugs and cable glands, fixed in repair, complete all as specified and directed.
MCB, SPN, 6 to 32 Amp, 240 Volt, conforming to 'B' curve, 10kA breaking capacity, complete all as specified and directed.
MCB, SP, 6 to 32 Amp, 240 Volt, conforming to 'B' curve, 10kA breaking capacity, complete all as specified and directed.
LED mirror light fitting, 1x9W, 6000K decorative indirect up-down light fitting for mirror and wall light application with extruded polycarbonate environmental friendly energy efficient complete with all accessories, pre-wired and making connection with and including provision of three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp, complete all as specified and directed.
LED bulk head light fittings 1x10 watt having 600 Lumen enclosed in polycarbonate body, weather proof with co-extruded poly carbonate body, envoirement friendly, energy efficient pre-wired and making necessary electric connection from ceiling rose with flexible copper wire or fixed to wall firmly, fixed in repairs, complete all as specified & directed. Make : Havell's Cat Part No. HEXAFT10WLED857SSYMBOPC / Bajaj Model Wee Plus Cat Part No. BIBWP10LED or techno-commercially equivalent model in Crompton or Philips as approved by GE.
LED wall mounted tube light fitting, 1x18W, LED 6000K, decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, pre-wired and making connection with and including provision of three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp, complete all as specified and directed. Make : Havell's Cat Part No. LHEXBHP7INW018 or techno-commercially equivalent model in Crompton or Philips as approved by GE.
Decorative wall light fixture suitable for 15W TU retrofit CFL (B-22 base) enclosed in polycarbonate body, weather proof with co-extruded poly carbonate body, envoirement friendly, energy efficient pre-wired and making necessary electric connection from ceiling rose with flexible copper wire or fixed to wall firmly, complete all as specified & directed. Make: Havells cat part no CITY 4, LHFODFE1TC1W015 or equivalent of Philips/ Crompton.
Building security lighting luminaire 36W with unique peanut optics to ensure uniform distribution, hgiher spacing between poles and maintenance free system for city roads and streets, 50% energy saving, IP 66 protection PC and FG cover, high impact resistance complete including LED lamps and all accessories including bracket made out of 25mm bore light grade GI tubing of 1.20metre length bent to shape required and fixed to existing pole or building by means of two Nos MS FI 40mmx6mm clamps with suitable size bolt, nuts and washers and making connection with and including provision of three core flexible copper cable of size 23/0.0076 from fittinge to existing junction boxr of required length, complete all as specified and directed. MAKE:- Cat No. BRP409 LED CW 036 MR FG S1 PSU GR of Philips or Cat No ENDURACITYLITEPLATPLUSSL36WLED757SASYBOPC of Havells or techno-commercially equivalent model in Bajaj / CG
Earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth of not less than 2.25m deep below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level connected to GI earth lead of 4mm dia by means of bolts, nuts, washers of galvanised iron or steel, GI earth wire shall be protected by 15mm dia GI pipe 'medium grade', GI wire meshed funnel, alternate layer of charcoal and salt on all side to earth plate upto a thickness of 150mm, filling of black cotton soil in earth pit upto GL and connected to earth plate including necessary excavation & earthwork, PCC (1:2:4) type B-1 earth chamber and mild steel angle iron frame 25 x 25 x 6 mm and 40mm thick pre-cast RCC cover (1:2:4), type B-1 (using 20mm graded crushed aggregate) mix with 6mm dia MS bars @75mm c/c both ways, mild steel handle 12mm dia, PGI funnel and wire mesh, 20mm dia GI pipe light grade(ISI marked) for watering, etc complete all as shown in electrical plate No.3 of SSR Part-1, connected to earthing test point, including testing on completion, complete all as speciifed and as directed. NOTE:- The quoted rates shall also deemed to include the cost of Earth Test point and earth wire and protection pipe upto 7.5 metre beyond the earth plates electrode.
Sub main wiring complete with 2 runs of 4 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through and including provision of PVC rigid conduit 20mm dia and accessories connecting terminal ends to DB's including providing 1 run of 6 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly including taking down existing sub main wiring any type and making good disturbed surfaces to match with existing including sinking of boxes , complete all as specified and directed. NOTE:- (i) Two runs of 4 sq.mm copper conductor, one run of 4 sq.mm copper earth continuity conductor and one run of PVC rigid conduit and with accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.
Taking down / out existing ceiling fan/ exhaust fan for servicing, greasing, replacement of bearing, safety pin, canopy, fan condensor, clamp, rubber reel, nut / bolts as required at site and cleaning and preparing surface, filling cavities with filler including one coat painting with synthetic enamel paint including down rod of approved white colour including marking MES number and refixing in its original position and making all electric connection, complete all as specified and directed..
Taking down / out existing geyser by disconnecting all electric connection and cleaning and preparing surface, filling cavities with filler including one coat painting with synthetic enamel paint of approved white colour including marking MES number and refixing in its original position and making all electric connection, complete all as specified and directed..
Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amp 240V, fixed in repair, complete all as specified and directed.
Ventilator fan 230 Volt 50 Hz single phase AC supply, 230 mm sweep 'metallic range' complete including making necessary holes in masonry walls and making good the disturbed surfaces to match with the existing, complete all as specified and directed. MAKE:- Model: Ventil Air-DSP of Havells or techno-commercially equivalent model as approved by GE.
Exhaust fan 230 Volt 50 Hz single phase AC supply, 380 mm sweep with louvers complete with metal body powder coated with protective steel bird guard on wall of building with and including provision of 3 core 1.5 Sq.mm flexible cable from ceiling rose to exhaust fan including writing MES number on exhaust fan motor using synthetic enamel paint of approved tint, including making necessary holes in masonry walls and making good the disturbed surfaces to match with the existing, complete all as specified and directed. MAKE:- Model: Ventil Air-DS of Havells or techno-commercially equivalent model as approved by GE.
Spreading of natural, clean and dry river sand in trenches for cable cushioning, including punning the sand upto desired thicknes and consolidated, complete all as specified and directed. NOTE: Punned thickness shall only be measured and paid.
Supply and lay burnt clay fly ash bricks class 'B', modular bricks, laid in trenches for cable protection with length of brick equal to width of trench, complete all as specified and directed.
Supply, laying and testing XLPE cable insulated, screened, PVC beded galvanised steel strip or wire armoured, electric power cable (Heavy Duty) 1100 Volt grade with stranded aluminium conductor of 4.0 core 6 sq.mm, including rigid PVC conduit as per site requirement, complete all as specified and directed. NOTE:- Excavation, earth work, sand cushioning and brick protection work shall be measured and paid separately under respective items of this Schedule.
Robustly designed IP-65/ IK-10 bollard garden light 15W, innovative design with uniformly lit diffuser at the upper portion acts as a beacon of path guidance in a landscape environment light to be fixed on cement concrete in bed in foundations filling and mass concrete and making electrical connections with copper cable, complete all as specified and directed. Make: Philips cat part no BCP150LED150/NW PSU 220-240V 7043 or equivalent in Havells/ Crompton.
LED spike garden light 6W, robust design IP-65/ IK-06, die cast aluminnium housing with tempered glass for precise light distribution, to be fixed on cement concrete in bed in foundations filling and mass concrete and making electrical connections with copper cable, complete all as specified and directed. Make: Philips cat part no BGP150LED480/ NW 6W 20D GM or equivalent in Havells/ Crompton.
Town glow post top 28W, in contemporary design IP-66/ IK-10 post top lantern with symmetric light distribution, to be fixed on cement concrete in bed in foundations filling and mass concrete and making electrical connections with copper cable, complete all as specified and directed. Make: Philips cat part no BGP300 LED28 757 PSU IN S1 or equivalent in Havells/ Crompton.
Channa Brothers and Co.
M/S Garg Sons
KRISHNA BAHADUR
ms shanti sons
K L KALSI
M/S A P CONSTRUCTION
His And Her Enterprises
K R KAUSHAL AND SONS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .