CERTAIN MAINTENANCE WORK TO HEATING COOLING APPLIANCES AND SUMMER APPLIANCES AND CONNECTED WORKS AT DALHOUSIE CANTT

Amount

M&L for general servicing/ repair and maintenance of window type AC's of capacity 1.5/2.0 TR comprising of the following tasks at different location of any condition & and transporting to contractor workshop to carry out necessary repair including refixing at site, commissioning, testing, painting of AC's and writing of MES Number complete all as specified and directed :- (i) Inspecting, taking down, brushing cleaning with blower including acid/detergent wash of condenser and cooling coil. (ii) Carry out running test of operation of blower and compressor and ensure that satisfactory functioning of all parts. (iii) Inspecting for leakage in the system. (iv) Checking the earth continuity of electrical parts. (v) Checking the functioning of thermostat. (vi) Inspection of electrical parts. (vii) Testing the machine for satisfactory operation. Note:- (i) Any part found unserviceable / defective shall be measured and paid separately under respective item here-in-after. (ii) Make of parts shall be as per original window type AC.

S&F in replacement of air filter of window type AC 1.5/2.0 TR capacity asper existing Make & Model as required at site complete all as specified and directed.

S& F in replacement of cooling coil as per existing Make and Model suitable for 1.5/2.0 TR capacity window air conditioner commissioning & testing complete all as specified and directed.

S&F in replacement of fan & blower motor as per existing make & model & suitable for 1.5/2.0 TR capacity window air conditioner complete all as specfied and directed.

S&F in replacement of fan blade as per existing make & model & suitable for 1.5/2.0 TR capacity window air conditioner complete all as specified and directed

M&L for charging of Refrigerant (R-22) to 1.5/2.0 TR Air conditioner up to maintain reqd temperature as per site condition complete all as specified and directed. Note :- (i) Refrigernat (R-22) shall be deemed to be included in the quoted rate. (ii) Empty / filled cylinder shall be responsibility of contractor and he shall be liable for all risk against same deemed to be including in the quoted rate.

S&F in repair compressor Hermatically sealed unit suitable for 1.5/2.0 TR AC window type ISI marked suitable for working on 230 volts single phase including filling of gas R-22 of required quantity including testing on full load complete all as specified and as directed.

S& F in replacement of Running capacitor 36/45 MFD. complete all as specified and directed.

S& F in replacement of Starting capacitor 80/100 MFD complete all as specified and directed.

S&F in replacement of Electronic circuit board for window type air conditioners suitable for 1.5 Ton AC window type ISI marked as per the existing make complete all as specified and directed..

S&F in replacement of Gas filter for 1.5/2.0 Ton AC.

S&F in replacement of Thermostat switch for 1.5/2.0 Ton AC complete all as specified and directed.

S&F in replacement of Front grill suitable size.

M&L for general servicing/repair & maintenace of Refrigerator 165 to 320 Ltr capacity comprising of the following tasks at different location and disconnecting and taking out unserviceable parts such as relay over load, thermostat, gas filter, bulb etc including fixing new parts with new nut bolts and washers etc re-assembling the refrigerator after repairing and testing complete including welding / Brazing works where ever required complete all as specified and as directed including and transporting to contractor workshop to carry out necessary repair complete all as specified and directed :- (i) Inspecting, taking down, brushing cleaning with blower including acid/ detergent wash of condenser and cooling coil. (ii) Carry out operation of blower and compressor and ensure that satisfactory funtioning of all parts. (iii) Inspecting the leakage in the system. (iv) Checking of the earth continuity of electrical parts. (v) Checking the functioning of thermostat (vi) Inspection of all electrical parts (vii) Testing the machine for satisfactory operation. (viii) Check and correct all electrical wiring & test its functioning. (ix) Testing of Refrigerator after repair. Note:- (i) Any parts found unservicable/defective shall be measured and paid separately under respectivel item here-in-after. (ii) Make of parts shall be as per original Refrigerator.

Supply and fixing in replacement of old unserviceable spare parts of Refrigeratator for capacity 180 ltr to 310 ltr and fixing new spare partrs with complete testing after completion of work complete suitable make and list of items for PTC relay OLP HE 48/115.

Door handle suitable for 165 - 310 Ltrs capacity refrigerators.

Overload protector for refrigerator 1/6 HP.

Overload protector for refrigerator 1/8 HP.

Thermostat suitable for 165-310 Ltr refrigerator.

Vibration Pad for AC Compresssor of Refrigerator any capacity

Water waste tray for Refrigerator suitable for 310/315 Ltr capacity

Section pipe insulator for Refrigerator suitable for 310/315 Ltr capacity

Stand Shoe for Refrigerator

Freezer Door frame for Refrigerator suitable for 310/315 Ltr capacity

Bulb holder for Refrigerator

Bulb Cover for Refrigerator suitable for 310/315 Ltr capacity

Vegitable Tray glass for Refrigerator suitable for 310/315 Ltr capacity

Vegitable Tray glass for Refrigerator suitable for 180/190 Ltr capacity

Freezer Hings

Healing Condenser for Refrigerator suitable for 310/315 Ltr capacity

Base Plate for Refrigerator suitable for 310/315 Ltr capacity

Door lock for Refrigerator 310/190 Ltr capacity

Door switch for Refrigerator 310/190 Ltr capacity

Heating condeser for Refrigerator 190 Ltr capacity

Compressor guard plate for Refrigerator suitable for 310/315 Ltr capacity

Freezer door Frame for Refrigerator suitable for 180/190 Ltr capacity

S&F in replacement of burnt compressor Company make original as per existing Make & model & suitable for refrigerator of capacity 165-190 Ltr complete all as specified and directed. Gas charging will be measured and paid saparately.

S&F in replacement of burnt compressor Company make original as per existing Make & model & suitable for refrigerator of capacity 215-315 Ltr complete all as specified and directed. Gas charging will be measured and paid saparately.

Disconnecting and taking down refrigerator (165 to 320 Ltr Cap) of any make and size for repairs & including detecting of leakage in the system rectifying the same, dehydration & recharging of gas (R-134a) & testing the refrigerator for smooth & satisfactory operation complete all as specified and directed .NOTE:- (i) Filling / recharging of gas (R-134a) shall be deemed to be included in the quoted rate (ii) Empty / filled cylinder shall be responsibility of contractor and he shall be liable for all risk against same deemed to be included in the quoted rate.

S&F in repair ice chamber (Freezer) for 165 / 175 /285 /300 /315 Ltr refrigerator surrounded by frezzer pipes complete all as specified and as directed .

Supply and fixing in replacement of cooling coil for 285 / 300 / 310 Ltr of any make refrigerator.

Supply and fixing in replacement of cooling coil for 165/175 Ltrs of any make refrigeratror.

Disconnecting and taking down old existing Plug top and socket from existing sheet metal enclosure of any description and in any position and Supply, fixing, connecting & testing plug top & socket single pole and neutral , 240 Volts,20 Amp complete all as specified & directed by Engineer-in-Charge.

GESYERS: Taking down and dismantling of defective parts of geysers of any capacity by unscrewing the nuts from the mounting bolts and disconnection of electric and water connection including transportation the same to workshop and reinstallation/Reassembling complete of geysers after repair. NOTE(i) The replacement of defective / nonfunctional parts shall be measured & paid for separately as “Supply only” under appropriate item of Sch ‘A’ and fixing charges for new/ repaired items are deemed to be included under this item. (ii) Minor parts such as nuts and bolts reqd for fixing inner tank is deemed to be included under this item.

Supply only steel inner tank suitabel for geyser of capacity 25 Ltrs.

Supply only steel inner tank suitabel for geyser of capacity 50 Ltrs.

Supply only glass wool for Geysers of cap 25/50 Ltr

Supply only pressure release valve for geysers

Supply only dead weight valve for geysers

Supply only heating element 1.5 KW triangle type for Geysers.

Supply only heating element 1.5 KW round type for Geysers.

Supply only heating element 2.0 KW triangle type for Geysers.

Supply only heating element 2.0 KW round type for Geysers.

Supply only thermostat of geysers

Supply only geyser assy 6/9 holes including, rubber rings, clamps, nuts & bolts etc for 25 Ltrs capacity geysers.

Supply only geyser assy 6/9 holes including, rubber rings, clamps, nuts & bolts etc for 50 Ltrs capacity geysers.

Supply only base plate of geysers of 25 Ltrs capacity.

Supply only base plate of geysers of 50 Ltrs capacity.

Supply only PVC connection ½” heavy duty 450mm long for cold water.

Supply only PVC connection ½” heavy duty 450mm long for Hot water.

Spray painting of Geyser of any capacity with synthetic enamel paint of superior quality including preparation of surfaces, complete all as specified and directed.

Steel water tubing, medium grade, Galvanized with screwed and socket joints, with all fittings such as short lengths, tees, bends, unions, elbows, reducers etc concealed in wall or laid fixed in repairs in floors 15mm bore size complete all as specified and directed.

Supply only PVC cable 40/.0076 three core for geysers

Supply only indication lamp for Geysers

Supply only plug top 3 pin 15 Amp for Geysers

Supply only non return valve 15mm

Supply only single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole mcb 10 amps.

Fan/Exhaust Fans Taking down ceiling fan from any position dismantling the blades, cutting damaged winding and taking the fans to contractor wksp for rewinding of ceiling fan motor single phase 220/230 volts 50 c/s 1200/1400 mm sweep of any type with suitable size super enameled copper winding wire with allied winding material varnishing with air dry insulation carrying complete servicing of fan by cleaning greasing the bearing, oiling of moving parts, washer packing including replacement of split pin, twin flexible copper wire of size 0.5 Sqmm length upto 1 Mtr length, reassembling and testing on load and fixing in existing position,complete all as directed.Note (i) The rates for above items are deemed to include for transportation to & fro of Fan/Eaxhaust fan to workshop as approved by Engineer-in-charge for necessary repairs and testing of fan at workshop .

All as per Sl item No.69 herein before but for exhaust fans 300mm sweep.

All as per Sl item No.69 here in before but for exhaust fan 450mm sweep

Supply only ball bearing of suitable size for 1200/1400mm sweep ceiling fan

Supply only ball bearing suitable for exhaust fan of 300/450 mm sweep.

Supply only condenser 2.5/3.15 MFD

Supply only condenser 4 MFD

Spray painting to all exposed surfaces of ceiling fan 1200/1400 mm sweep after cleaning all dust and scratching of old paint and painting with one coat of synthetic enameled paint and writing Numbering in capital letter complete, all as directed by Engr-in-Charge

All as per ser item No 76 herein before but exhaust fan of 300/450 mm sweep

Supply only Rubber real with nut, bolts clamp and washers of suitable size for ceiling fan.

Supply only Top and bottom canopy of ceiling fan 1200/1400 mm sweep as approved by Engr-in-Charge

Supply onlyCeiling fan blade suitable 1200/1400 mm sweep and to match with the existing fan and as approved by Engr-in-Charge

Supply only Down rod of mild steel of standard dia upto 0.5 mtrs length suitable for ceiling fan 1200/1400 mm sweep

Supply only Fan hook 15" long made out of 8mm MS bar 'S' hook including suitable clamp made out of 25 x 3mm MS flat iron and also including nuts, bolts etc. complete all directed.

Taking down carefully copper/aluminium point wiring (light ,fan,socket or power) complete fixture and fittings such as switches ,ceiling rose, regulators,sockets etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separatly) and making good disturbed surfaces of wall, floors etc.

Point wiring with multi stranded copper conductor of size 1.5 Sqmm PVC FRLS insulated unsheathed cable in and including PVC casing caping and accessories including 1.50 Sqmm PVC FRLS copper earth wire (green colour) for one light point or fan point or bell point controlled by one, one way switch using cable of different insulation colour for colour coding including 3mm thick laminated sheet cover, mild steel sheet or cast iron boxes including cutting chases and making good to disturbed surfaces of wall/floor complete, all as specified and directed.

All as per item No 84 hereinbefore but for 3 pin socket outlet 5 Amp independent.

All as per item No 84 hereinbefore but for 3 pin socket outlet 5 Amp on same board.

All as per item No 84 hereinbefore but for 3 pin socket outlet 15 Amp independent board using cable of size 2.5 sqmm conduit all as specified and directed. Note for item No 2 to 10 Wire make:- polycab/Finolex/Havells

Supply & Fixing Switch piano, flush button, single pole one way 6 Amps

Supply & Fixing Socket outlet 3 pin, 6 amps flush type.

S & F socket outlet 16 Amp & 6 Amp, 2-in-1, controlled by one switch (ISI marked) complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Switch piano, flush button, single pole one way 16 Amps

Supply and fix in replacement of Tube light fitting box type suitable for LED 18W/20W tube Rod with decorative colour and cap made out of CRCA sheet powder coated complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting including 18/20W LED tube rod 4 feet long complete all as specified and directed.

Supply and fix LED batten fitting 10w with engineering plastic housing mounted on wall/surface connecting with all required accessories like square box for mounting on wall, flexible cable from ceiling rose etc as directed and specified by engr-in-charge.

S & F LED Bulb 12 Watt rechargeable emergenc inverter LED bulb, cool day light, white upto 4 hours backup and auto cut-off after full charge Model: Bajaj/Phillips/ Havells/Crompton/Wipro all as specified and as directed.

S&F ceiling rose PVC/polycarbonate, isolated body surface Bakelite 65mm dia three terminals

M & L for sub main wiring with 6.0 sqmm copper conductor cable multistrand, FRLSH PVC sheathed two run (as phase and neutral) and run 6.0 Sqmm multistrand FRLSH PVC sheathed copper conductor cable for earth continuity in drawn in PVC conduit /PVC casing caping wiring complete all as specified and directed by Engr-in-charge.(Note:-the rate for concealed type point wiring shall deemed to include the cost of cutting,chasing in wall by using electric cutter and making good the disturbed surface of wall by providing cement plasterand matching the surface by white wash/colour wash all as per existing finishes complete).

Supply and fix in replacement of old unserviciable Sheet metal enclousre for DBs double door single pole and neutral with 200 amps rated bus bar of 8- way, 240 volts complete all as spd and directed.

Supply and fixing MCB single pole and nuetral 6 to 40 Amps, 240 volts complete all as spd and directed.

Supply and fixing MCB single pole 6 to 32Amps, 240 volts all as spd and directed.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 6 mm suspensions wire ,one twin core cable flate or circular 6 sqmm all as specified and directed .

Ditto item no-100, but 2 core 10 sqmm

M/S SAROOP ELECTRICAL & MECHANICAL WORKS (BID ID -3334885)

M/S SHAKTI ELECTRIC WORKS (BID ID -3335362)

M/s. Rishav Sood (BID ID -3335083)

M/S ANSHUL ENTERPRISES (BID ID -3335369)

M/S GOLDEN CONSTRUCIONS (BID ID -3335486)

M/S MALHI CONSTRUCTIONS (BID ID -3333926)

M/s Northern India Construction co (BID ID -3335267)