PROVN OF CREW ROOM AT AWC UNDER GE AWC MHOW.

Amount

Surface excavation in soft soil n exc 30 cm deep and avg 15 cm deep and getting out complete.

Excavation in trenches, n. exc. 1.5 m wide and n.exc 1.5 m in depth ;for foundation, etc or for shaft, well, cesspit, manhole, pier holes etc.n. exc. 10 sq m on plan and n. exc. 1.5 m in depth and getting out soft/loose soil.

Excavation in trenches, n. exc. 1.5 m wide and n.exc 1.5 m in depth ;for foundation, etc or for shaft, well, cesspit, manhole, pier hole etc.n. exc. 10 sq m on plan and n. exc. 1.5 m in depth and getting out Hard/Dense soil.

Excavation in trenches, n. exc. 1.5 m wide and n.exc 1.5 m in depth ;for foundation, etc or for shaft, well, cesspit, manhole, pier holes etc.n. exc. 10 sq m on plan and n. exc. 1.5 m in depth and getting out soft/disintregated rock.

Returnning, filling in including spreading, leveling, watering and well ramming in layers not exc 25cm any types of soil.

Removing of excavated material/soil not exceeding 50 m and depositing where directed at a level and not exceeding 1.50m above the staring point complete all as specified and directed.

Removing of excavated material not exceeding 500 m and depositing where directed at a level and not exceeding 1.50m above the staring point complete all as specified and directed.

Material and labour for PCC 1:5:10, type E-2 using 40mm graded crushed stone aggregate) as in sub floor, Sub base etc complete all as specified and directed.

Material and labour RCC M-25 design mix in foundation footing, plinth beam, bases for column and pedestal using 20mm graded curshed aggregate complete all as specified and directed.

Material and labour RCC M-25 design mix in column, pillars, piers, post etc using 20mm graded curshed aggregate complete all as specified and directed.

Material and labour RCC M-25 design mix in lintel beam,chajja etc using 20mm graded curshed aggregate complete all as specified and directed.

Formwork to sides of concrete foundations footings bases of columns raft and raft beams sides and sofits (if any) of foundation and plinth beams, and similar work vertical or to batter rough finished sufraces of concrete complete.

Formwork to sides of pillars posts, struts, piers, columns and stanchions rough finished surfaces of concrete Square rectangular or polygonal complete.

Formwork to sides and soffits of floor or roof beams, beam haunchibngs, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams etc rough finished surfaces of concrete.

Formwork to Chajjas, troughs and similar items including edges complete

M&L Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and bindingwith and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete.

Description same as per item No. 15.00 but 5mm dia and over upto and including 8mm dia quality confirming to TMT bar.

Description same as per item No. 15.00 but 6 mm dia and over upto and including 8mm dia in stirrups spacers amd binders quality confirming to TMT bar.

S&F Prepainted galvalume aluminium Zinc coating GI based corrugated steel,sheet 0.50mm thick of approved colour having tensile strengh of 550 mpa as in roof covering /cladding to wall,fixed with screw ,Complete all as specified and directed.

S&F Prepainted galvatume aluminium Zinc coating GI based plain steel,sheet 0.50mm thick of approved colour having tensile strengh of 550 mpa as in roof covering /cladding to wall,fixed with screw ,Complete all as specified and directed.

M&L providing and fixing of false ceiling with powder coated exposed GI grid suspension system (E-grid T-2420 or equivalent of Armstrong having load carrying capacity of 12.5 Kg/M3 with mid span deflection not exceeding 1/360 span with hanger spacing of 1200 mm c/c) consisting of Main Runner 3600 mm long, Cross Tee 1200/600 mm long and Wall Angle. The wall angle shall be fixed on PVC dash fasteners on the perimeter of the wall with steel screws with distance 300 mm c/c. The main runners to be placed @ 1200 mm, the cross tee 1200 mm will be inserted in the pre-cut slots of Main Runner at regular interval of 600 mm to form a modular grid of 1200x600mm. Additional cross tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm x 600 mm with and including 6 mm thick HSPC (High pressure steam cured) oceanic pre primed, self embossed, textured designer board, water, termite & fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4 mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt 0.007 kg/clip), hold down clips (wt-0.0035 Kg/clip), with provn of light fixture complete all as per manufacturer instructions and as directed. Make Armstrong/Everest

M&L for roof trusses (framed) fastening (angle,plate,and flat section)complete all as specified.

M&Lfor MS pipe ,Joist,channel,angle,or tee sections, fixed independently,without connecting plete,etc(cut to ordinary length)as in purlin /rafter/windtie confirming to grade Fe 410-S complete all as specified and as directed.

M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surface any description over 10cm width or girth, complete all as specified and as directed. Make:- Asian Paint (Apcolite), Nerolac (Nerolac Full Glass), ICI Paint (Dulux Gloss)

M&L modular brick work with sub class B Bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified.

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, mixed with water proofing compound, surface finished even and smooth without using extra cement.

Supply only integral water proofing compound complete. Make:- Water Seal rom Acro Paints, Pidlite Industries Ltd, Accorproof from ACC

M & L 12 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and smooth without using extra cement complete.

M & L for 5 mm thick rendering on concrete surface in cement mortar 1:3, below chajja and shelves ,complete all as specified and as directed.

M & L for preparation of newly plastered wall surface and applying two coats of coloured acrylic water emulsion paint over a coat of wall primer(X2) complete all as specified . Note :- Each stage is i.e. preparation of surface, application of primer, application of first coat and application of second coat will be got passed from Engr-in-charge. Make of acrylic water emulsion paint:- Asian (Apex Ultima) or Nerolic (Excel Total or ICI Dulex). Make of primer: Asian (X2) or equivalent of Narolac.

M & L applying one coat of wall care putty incl prep of surface complete. Make:- Birla white, JK White

M & L for applying two coat of oil bound distemper over a coat of primer surface complete. Make:- Berger, Asian Paints, Goodlass Nerolac Paints

Material and labour for moorum filling in floors of paving laid in layers not exceeding 15cm thick including spreading leveling watering and consolidation complete all as specified and directed.

M & L non-skid / mat finish coloured joint free ceramic tiles 7 to 8 mm thick( square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.118 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:4 complete all as specified and directed. Make:- Kajaria, Johnson, Orient

M&L glazed ceramic coloured tiles350x250x 6to7 mm thick/450x350x6to 7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. Make:- Kajaria, Johnson, Orient

M & L for vitrified ceramic tiles 10 mm thick square or rectangular polish aera of each tile exc 0.36 but n.exc 0.42 mm in floor set and jointed in neat cement slurry and pointed in coloured cement to match ,over 15mm cement screed bed in CM 1:4. Make:- Kajaria, Johnson (Marbonite) , Bell Granito

M & L 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection, laid in alternate ways, surface finished even and fair without using extra cement complete.

S&F Powder coated aluminium paneled door shutters with the following specification and making good the adjacent surfaces. loading & unloading:- (i) Cross section of frame 101.60x44.45 x 2mm thick (ii) Cross section of hanging & meeting style 83 x 44 x 2mm thick (iii) Top rail of cross section 114 x 44 x 2mm thick (iv) Bottom rail of cross section 114x44x2mm thick (v) Locking rail (middle rail) of cross section 83 x 44 x 2mm thick (xi) 12mm thick pre-laminated wooden board of matching shade with aluminium work and fixed with glazing strip of size 18.2x16.66 mm (vi) Aluminium handle disc type – 02 Nos per shutter (one inside & one out side) (vii) Aluminium door stopper heavy duty = 01 No per shutter (viii) Aluminium tower bolt 200mm long = 01 No per shutter (inside) (ix) Lock with key superior quality openable both from inside & out side = 01 No per shutter

S&F of Powder coated aluminum sliding Glazed window with three track for shutters, fixed with the following specifications and making good the adjacent surfaces. (i) Window frame of cross section 63.50 x 38.10 x 2mm thick (ii) Two way track for sliding shutters of cross section 62 x 30 x1.5 mm thick. (iii) Sliding & fixed shutter frame of cross section 40x18x1mm (iv) Aluminium glazing strip of size 18.2x16.66mm (v) 4 mm thick tinted glass superior quality (vi) IDPE rubber gasket for fixing glass (vii) Locking cleat per shutter - 01 No (viii) Two nos sliding rollers per shutter (ix) Rubber shock absorber 03 No per shutter (x) Necessary fixing clips for middle fixed shutter as approved. (xi) Fixing screws for frame with wall – 06 No per window

S&F double action floor spring hydraucally regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

S&F power coated aluminium butt hinges 125 mm long with screws complete.

S&F Powder coated anodised aluminium ventiletor shutters fixed type without sash bar aluminumium section weighing 0.55kg/mtr including necessary joing cleats glazing clips rubber packing,anodised aluminum snap beading screws,etc.complete all as specified and as directed.

M/L for structural steel work as in staging of water tank and like incl caps,bases, spices etc builtup using beams,channel or angles incl all latice base stiffeners, gusset plate etc complete all as directed by Engr in charge.

M&L machine cut cuddappa stone slab 20-25mm thick as in base for PVC water tank ,Complete all as specified and as directed.

S/F Rotational mounted polyethylene water storage tank ( Cylindrical vertical with closed top) hoisted and fixed in position 500 lit capacity all as specified and as directed by Engr in charge. Make:- Sintex ( 2 Layer), Dhara, J.S. Polyplast

S/F 25 mm dia bore ball valve brass high pressure ,with polythethene float and flynut complete all as spd and as directed by Engr in charge.

Supplying fixing, jointing and testing galvanised iron tube of 15 mm dia , medium grade with all fitting such as bends, elbow, socket, reduce etc fixed to walls and ceiling or laid in complete all as specified and directed.

Supplying fixing, jointing and testing galvanised iron tube of 20 mm dia , medium grade with all fitting such as bends, elbow, socket, reduce etc fixed to walls and ceiling or laid in complete all as specified and directed.

S & F EWC, Indus wall Hung set fitting complete as directed. Make- Parryware cat No - C0287/88/S& Popular Quality -Premium, or equivalent make in Jaquar/ Hindware as approved by GE.

S &F urinal LLC & Lab sink white. Make:- Parryware Cat no C0501 White or equivalent make in Jaquar/ Hindware as approved by GE.

S & F Counter Basin(WHB) oval Basin size 550mmx450mm. Make- Parryware Code No- 0419 Premium, or equivalent make in Jaquar/ Hindware as Pre approved by GE.

S &F Flushing cisterns (Slim line)of capacity 10 Litr, Slime Delux single flush coloured. Quality - Premium. Make- Parryware. E8303 White, or equivalent make in Jaquar/ Hindware as approved by GE.

S & F 15mm dia bib cock long body with wall flunge. Make- Parryware Cat No. 93404A1, or equivalent make in Jaquar/ Plumber as approved by GE.

S&F 15mm Concealed stop cock, extra heavy body with adjusttable wall flange. Make- Parryware Cat No-G1461A1, or equivalent make in Jaquar/ Plumber as approved by GE.

S & F brass chromium plated towel rail 20 mm outer dia Bracket type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, complete. Make - Cat part No T6001A1 of Parryware, or equivalent make in Jaquar/ Plumber as Pre approved by GE.

S & F Bidet spray (Health faucet) with 1 meter tube and holder, complete all as specified and directed. Make - Cat part No T9937A1 of Parryware or equivalent make in Jaquar/ Plumber as Pre approved by GE.

S&F CP Soap Dish with ABS dish Holder, complete all as specified and directed by Engineer-incharge. Make - Cat part No T6403A1 of Parryware or equivalent make in Jaquar/ Plumber as Pre approved by GE.

S&F CP Toilet paper holder, complete all as specified and directed by Engineer-incharge. Make - Cat part No T6005A1 of Parryware or equivalent make in Jaquar/ Plumber as Pre approved by GE.

S&F 15 mm dia pillar tap brass chromium plated with capstan heads, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shank and fly nuts complete. Make - Parryware / Jaquar/ Plumber as Pre approved by GE.

S & F cast iron soil waste pipe in 100mm bore of any length with or without ears with cement joints and fixed to wall with suitable clamps on wall complete all as specified and directed

S & F 100 mm bore cast iron vent cowl, including taking down existing unserviceable cowl complete all as specified and directed.

S & F cast iron bends in (any radious) diminishing pieces or tapers( larger bore measured) in 100 mm dia

S & F branch pieces , single (equal or unequal) ordinary or inverted (spigot or socket type) with parallel branches in 100mm dia complete all as specified and directed.

M&L for 100mm dia sgsw pipes laid in trenches over concrete bed including necessary haunching (the unit rate include for cost of earth work excavation in ordinary soil, PCC 1:4:8 bedding 15 cm base thickness and haunching, necessary formwork and returning filling ramming in foundation trenches complete all as directed by Engr-in-charge)

M&L for construction of new septic tank ,exc in ordinery soil, foundation in pcc 1:4:8, brick work in CM1:4 RCC slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame vent shaft and sludge chambers etc, for 10 users. complete all as specified and shown in Drg no. CEJZ/TD/57/Sheet1/1 to1/4 dated 05 May 2000 complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded as in subbase of floor complete all as specified and directed

M&L for 80mm thick machine pressed precast interlocking paver block (glossy finished) with grey cement with pigment conferring to IS 15658-2006 of M-40 gradee laid dry & joints filled with fine sand and shape colour and pattern as spproved by GE laid required colour and pattern over and including 30mm thick corpacted bed of coarse sand filling the joints with fine sand etc. all complete as per the direction of Engineer-in-Charge

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside cement for stiles and plain colour pvc sheet for top rail,lock rail or bottam rail on eidher side as gap insert for top rail and bottam rail,panelling of plain colour pvc sheet to be fitted in the m.s frame welded /sealed to the stiles & rail with suitable pvc sheet bedding ,and joint togather with solvent cement S&F in the frame at side as per specification & drawing.

S & F aluminium 150 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete.Make :- Classic, New Delhi, Mepro, M/S Elite Enterprises

S&F 150 mm long Aluminium handles, cast type anodised 'D' shaped , 150mm long ISI marked all as specified. Make :- Classic, New Delhi, Mepro, M/S Elite Enterprises

S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete. Make : “SYNTEX/ Rajshree Plastic wood Forex, Indore”.M/S Kumar Arch Tech Ltd

Supply, laying or fixing, jointing and testing LT under ground electric power cable of size 25 sqmm, 3.5 core. Crossed linked polyethylene (XLPE Cable ) insulated, galvanised steel strip or wire armoured, ISI -7098 Marked. With aluminium conductor multi stranded , heavy duty 1100 Volts grade of following sizes and core , complete all as specified laid in tenches / laid under floor or fixed naked with walls/ on poles/ in ducts/ in GI pipes etc:- Make:- Finolex,RPG(Asian),RR Kable, Universal

M&L river washed and screened dry fine sand filling in trenches below and above / around under ground cable for cable protection, in duct under & abobe the cables including punning around cable complete all as specified and directed. Note :- Punned thickness shall be measured for payment.

M & L for unreinforced PCC Cable protection cover , Class LV ,Type1 flat ,size 250x150x40mm as cable protection laid flat width wise complete all as specified and directed.

Supply and laying galvanised iron pipe 'light Grade' 20 mm in trenches , under floors, roads, along poles for protection of cables with all necessary fittings, including sealing ends complete all as specified and directed .Make:- Jindal /Prakash Surya /Tata.

S&F stop valve, screwed, chromium plated fancy type for 20 mm dia pipe complete all as specified and as directed.

M&L Point wiring with 1.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FRLS copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete , including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FRLS copper conductor connected to all fittings, common earth and connected to earth dolly complete all as specified and directed for one light / fan/ bell controlled by one ,one way switch 5/6 Amps. Make :- V Marc, Polycab, Havell's, RR Kabel.

Description same all as per item No 77.00 here in before but One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 Amps switch.

Description same all as per item No 77.00 here in before but One 3 pin, 5/6 Amps socket outlet point on same board controlled by one, one way 5/6 Amps switch.

M&L for Point wiring with 2.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FRLS copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FRLS copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 amps socket out-let point on an independent board complete complete all as specified and directed . .Make :- V Marc, Polycab, Havell's, RR Kabel

Supply and fixing modular metal flush box 3 module complete all as specified and as directed.Make:- Anchor , Legrand,Crabtree (Havell's)

Supply and fixing modular metal flush box 6 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

Supply and fixing modular metal flush box 8 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

Supply and fixing modular white cover plate with frame 3 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

Supply and fixing modular white cover plate with frame 6 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

Supply and fixing modular white cover plate with frame 8 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

S&F in replacement of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V . Make:- Anchor , Legrand,Crabtree (Havell's)

S&F modular switch 1 way 6 A , 1 module complete all as specified and directed. Make:- Anchor , Legrand,Crabtree (Havell's)

S & F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed. Make:- Anchor , Legrand,Crabtree (Havell's)

S & F switch socket combination modular type multipurposes 6/16 A, 3 module complete all as specified and directed. Make:- Anchor , Legrand,Crabtree (Havell's)

S & F wall mounted LED batten ,extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 20 W LED fitting 4 feet long complete all as specified and directed. Havells cat part No- cat No :-LUMILINEPLUSBS 20WLED865SPCSS / WIPRO cat part No :- D532065 / Bajaj Cat part No:-112785

Supply and fixing wall mounted LED batten ,extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 10 W LED fitting 2 feet long complete all as specified and directed. Havells cat part No- cat No :-LUMILINEPLUSBS 10WLED865SPCSS / WIPRO cat part No :- D531065 /Bajaj Cat part No:-112408

S & F LED street light fitting 30 watt made up of pressure die cast aluminium housing with acylic cover as diffuser with IP-66 protection complete all as specified and directed. Make:- Havells , code no ENDURACITYLITEPLATPLUSSL 30WLED757SASYBOPC / WIPRO cat part No :-LR02-291-XXX-57-XX /Bajaj Cat part No:-169887

S&F MCCB ,DB wall mounted VTPN with provision of MCCB 3 pole 125 Amps 25 KA as incomer and SP/TP MCB's/Isolator as outgoing 6 way double door and including removed old U/S DB in the wall again fixing the new DB and wall finising complete all as specified and as directed. Make : L&T Cat No :-CM9063100M0/HPL Cat pt No- TAB160CY125AC3P / Indo Asian Cat No-830039

S&F MCCB 3 pole 415 V 100 A 50 Hz with rupturing capacity 25KA. Make : L&T, HPL, Indo Asian.

Supply and fixing MCB DB, SPN, double door 8 ways, 240 volts capacity complete all as specified Make : L&T Cat No :-DBSPN008DD HPL Cat pt No- DBECOTDD08 / Indo Asian Cat No-811806

Supply and fixing MCB DP 40 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed. Make : L&T Cat No :-BB20400C HPL Cat pt No- TSPNC40 / Indo Asian Cat No-811152

Supply and fixing MCB SP 6 to 32 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed.Make : L&T Cat No :-BB10320C HPL Cat pt No- TSPC6-32 / Indo Asian Cat No-811129

Supply and fixing exhaust fans AC single phase 230 volt of size 300 mm sweep with louver, 900 RPM. Make:-Bajaj model supreme DLX Cat No-70056 or equivalent make in Havell's/Crompton as Pre approved by GE.

Supply and fixing ceiling fan complete with electronic type regulators and accessories 230 volt, 1200 mm sweep , 50watt, 340 RPM Air delivery 210 CMM ,5 star rated complete all as specified Make:- Bajaj model speed ster Cat No:- 250917, Havells model ES-50, Crompton model HS Plus.

S & F sheet metal enclosure with two pin and earth plug with one single pole MCB 20 amps complete all as specified and directed. Make:- Havell's, HPL, L&T

Supply and fix water heater storage type ,electric , capacity 25 liters ,2000 Watt, powder coated metal body , adjustable themostat , magnesium anode of extra ptotection from corrosion and lekage and unique temperature indicator dial including PTMT connections 15 mm size with nuts and length of 450 mm complete all as directed. Make:- Bajaj model New shakti Cat No:-150743, Havells Model Monza DX cat no:- GHWAMGTWH025, Crompton Greaves model Arno Dlx Cat no:- ASWH1425

S&F stop valve, screwed, chromium plated fancy type for 15 mm dia pipe complete all as specified and as directed.

Supply and fixing sub main wiring with 2 single core,6 Sqmm, PVC insulated PVC unsheathed stranded copper conductor cable in and including PVC concealed/ surface conduit of earth wire with 1 x 4 Sq mm copper cable fixed along with the sub main in PVC conduit and connecting to earth dolly complete all as specified and directed.Make :- V Marc, Polycab, Havell's, RR Kabel

Replacement of Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.3 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to 32 x 6mm GI earth strip by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 5, connected to earthing test point complete including testing on completion all as specified.

ms shrilaxminarayan and sons

M/s Gupta Constructions

KAILASH CHANDRA KHANDELWAL

M/S UnitedConstruction

yash enterprises