Construction of Hindu Hridaysamrat Balasaheb Thakare Memorial Garden and Digital Aquarium at Garden Reservation no.08 infront of Hill Spring Society at Kavesar in Owala Majiwada Constituency.

Amount

Excavation for foundation in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stacking or spreading as directed, dewaterin, preparing the bed for the foundation and necessary back filling, ramming, watering, including shoring and strutting as necessary complete. ( Spec.No. : Bd.A.1Page no 259/ CSR Page No.150

Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (Lift from 1.5m To 3.0 m.) By Mechanical Means

Providing preconstruction alanti termite treatment as per I.S.6313(Part-II) treatment by treating the back fill in immediate contact with foundation attherate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per One Square Metre of vertical surface area covering 10 years guarantee on bond paper.

Providing preconstruction alantitermite treatment as per I.S.6313(Part-II) by treating the to surface of plinth filling attherate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per One Square Metre of surface area covering ten years guarantee on bond paper.

Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)

Providing soling using 80 mm size granite / quartzite / gneiss / trap metal in 15 cm. layer including hand packing filling voids with sand / grit, ramming, watering complete. (Spec. No. : As directed by Engineer-in-charge /Page No. 154)

StampConcreteof100mmThickness-ProvidingandLayingin-situM30Gradeunreinforcedplaincementstampconcreteof100mmthicknesspavementoverapreparedsubbasewith43gradecement,coarseandfineaggregate(naturalsand/VSIgradefinelywashedcrushedsand)ConfirmingtoIS383,aspermixedinabatchingandmixingplant/nontiltingmixerandweighbatcherasperapprovedmixdesign,admixtures,transportingtositeinnagpurcitywithleadupto20KM(onInnerRingRoadfromAvastinagartowadi),spreading,layingwithapprovedmakepover,compactedandfinishedinacontinousoperation,finishingtolinesandgradesAlsoProviding,PlacingandapplyingstamppowderwhichislightfastUVresistantpigmentwithappropriatechemicalcompoundsofdesiredcolouronbaseconcreteafterexcessbleedwaterhasevaporatedusingdryshakemethod@5kgpersqm.Includingtexturing,andcoveringwithplasticsheet(min200micronthickness)andalsoapplyingtwocoatsofUV-stable,30%solidsclearsealer@150to250gmspersqmusingsurfacerollerandprotectingfromfallingdust,dirtandcurringbycurringcompound/byprovidingcementvataincementMortor1:[email protected],admeasuring80mmatbottomand40mmattopwithdepthof75mmandmaintainingthesamethroughoutcuringperiodbyanyothermethodapprovedbyEngineer-inchargeorLandscapearchitectetc.complete.(priorapprovalofsuperinteding Engineer will be necessary )

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks,compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand .

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layersincluding watering and compacting etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand (in plinth)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast insitu/Ready Mix cement concrete in M-25 of trap /granite /quartzite /gneiss metal for R.C.C. Pardi of required thickness including steel entering, formwork, coverblocks, laying /pumping, compacting and rough ening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Panmixer)etc.complete.With fine aggregate (Crushedsand VSI Grade)

Providing castin situ / ready mix M20 grade cement concrete for head walls of CD work / retaining walls etc.including necessary formwork ,compaction, finishing and curing etc .complete .(with reversible drum type mixer / concretebatch mix plant (pan mixer)with SCADA

Providing and laying Castin situ/Ready Mix cement concrete in M-25 of trap/quartzite/granite/gneiss metal for R.C.C. Waist slab ,and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/steel formwork ,steelprops ,laying/pumping ,compaction ,finishing uneven and honeycombed surface with C.M .1:3 of sufficient minimum thickness to give as smooth and even surface or roughening the surface if specialfinish is to be provided and curing etc .complete .(Excludingeinforcement,includingcoverblock) .(Newlylaidconcreteshallbecoveredbygunnybag,plastic,tarpaulinetc.) with fully automatic microprocessor based PLC with SCAD Aenabled reversible Drum Typemixer /concrete Batchmixplant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ / Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfere as approved by the Engineer including steel centering ,formwork, coverblocks, laying / pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel) .with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Panmixer) etc .complete.With fine aggregate (Crushed sand VSI Grade)

Providing and laying in situ /readymixM-20 cement concrete of trap / granite / quartzite / gneiss metal for castin citu R.C.C.wall etc.including provision of V shaped false joints to form suitable panels on the faces to approve deisgn with compacting by vibrating and curing complete . Including plywood/ steel form work,centering (excluding dewatering by means of pump) and including bailling out water and including CM 1:3 curing complete.

Providing expansion joints in R.C.C. framed structure (at floor level) with premoulded filler 25 mm thick and 3 mm thick aluminium plate as required, bitumen poured filler and fixing T.W. battens on rear faces etc. complete as directed.

Providing and fixing in position HCRM /CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules .including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part3)-1984 in extra fine jointing mortar of fix o block of UltraTechor equivalent insuperstructure including striking joints ,raking out joint sand scaffolding etc.Complete.(The test shall be carried out conforming to IS:6441 (Part I) - 1972)

Providing and constructing masonry in Autoclaved Areaclaved (Celluar) Concrete Block of aproved manufacturer confirming to IS 2185 Part III 1984 of size (625x240x100) mm in extra fine jointing mortar of fixo block of in half brick thick wall including 2 hoop iron strips 25 mm x 1.6 mm at every third course,properly bend and bonded at ends scaffolding racking out joints and watering compete.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete

Providing and applying gypsum plaster (with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / oronnewly brick surface (Excluding rough cast plaster)in all position including preparing and Finishing the surface scaffolding etc.complete.

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeter of 8 to 10 millimeter thickness (ona existing flooring ) with bonding chemical and confirming to IS15622-2006 (GroupBla)of approved make shade and pattern for flooring in required position laid on abed of bonding chemical filling joints curing and cleaning etc .complete.

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeter of 8 to 10 millimeter thickness (ona existing flooring ) with bonding chemical and confirming to IS15622-2006 (GroupBla)of approved make shade and pattern for Skirting in required position laid on abed of bonding chemical filling joints curing and cleaning etc .complete.

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm 605 mm x 590 mm to 605 mm of 8 to10mm thickness and confirming to IS.15622-2006 (GroupBla) of approved make,shade and pattern for flooring in required position laid on of 1:4 cement mortar including neatcementfloat,fillingjoints,curingandcleaning etc. complete.

Providing and fixing machine cut machine polished 18mm to 20mm thick telephone black / AmbaWhite / Catbary brown /RBIred /Ocean Brown granite stone for treads and risers of steps and staircases ,with rounded nosing for the tread sona bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm to 8to10 mm thickness and confirming to IS.15622-2006 (GroupBla) of approved make,shade and pattern for dado and skirting in required position fixedin1:4cementmortarincludingneatcementfloat,fillingjoints,curingandcleaning. etc. complete.

Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry,curing,polishing,moulding edges,cleaning complete.a) Marble other than white makrana

Providing and fixing frame with/without ventilator of size as specified with Country cut teakwood for doors and windows including chamfering, rounding, rebating, Iron hold fastof size 300mm x 40mm x 5mm with oil painting, etc. complete

Providing and laying telephone black / AmbaWhite / Cadbury brown / Rubyred / Ocean Brown granite stone of 18 to 20 mm thick for door frame / dado / window boxing etc. On C.M.1:6 including filling joints with polymer base filler nosing/mouldingthesharp edges wherever necessary, curing, etc. complete.

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. comple

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete.

Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per IS1 4856 (2000) (Reaffirmed2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etccomplete.

Providing and fixing 34 mm thick moulded door shutter consisting of solid core single leaf flush door of 30 mm thickness lipped with 15 mm ( 5mm x 3) thick x 30 mm width on one style and top rail and 10 mm (5mm x 2) thick x 30 mm width on other style and bottom rails.The inner panels laminated with 2 mm thick termiteproof , waterproofandfireresistantmouldedPVCsheetwith2,4,6designindifferentplainand/orprelimcoloursononesideafterroutingthemouldeddesignonflushdoorsand2mmplainand/orprelamPVConothersideusingrubberadhesiveonflushdoorandsolventcementadhesiveonthePVClippingetc.asperdirectionofEngineerinchargeandmanufacturers specification and drawing etc. complete.

Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18x9x3mm minimum size ,crossings of M.S.flats of size 18 x 5mm Tor E section for runner of minimum 40 x 6 mm size for flange ,M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G.150 fitted with snapheaded rivets of minimum size 6 mm max . spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983).

Providing and fixing in position (asper1868/1982) Alluminium sliding window of three tracks with rectangular pipe 95x38.10x0.90 mm at weight 0.637Kilogram / One Running Metre .with window frame bottom track section 92 x 31.75x1.30mm at weight1.070 Kilogram / One Running Metre ..Top and side track section 92x31.75x1.30mm at weight 0.933Kilogram / Running metre .The shutter should be of bearing bottom 40x18x1.25mm at weight 0.417Kilogram / One Running Metre . Inter locking section 40x18x 1.10 mm at weight 0.469Kilogram / Running metre .and handle and topsection 40x18x1.25mm at weight0.417 Kilogram / Running metre .As per detailed drawingsandasdirectedbyEngineerinchargewithallnecessaryAluminiumsectionsfixturesandfasteningssuchasrollerbearinginnyloncastingandselflockingcatchfittedinverticalsectionofshutterincluding5mmthickplainglassandaluminiummosquitonetshutterwithstainlesssteeljailwithallrequiredscrewsandnutsetc,complete.WithcolourAnodisingwith box

Providing and fixing in position powder coated aluminium louvered windows/ ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38mm x1.22 mm box type,5 mm thick sheet glass louvers, of approved quality etc. complete.

Providing and fixing in position, Double shuttered aluminium extruded powder coated openable door of specified size with aluminium door frame of powder coated section 101.60 x 44.75mm , 3.18mm thick and shutter comprising of powder coated section having bottom and lockrail of size 150 mm x 44.5 mm x 3.00 mm thick top rails 47.62x44.45mmx3.00mm thick , vertical style 47.62 x 44.45mm ,3.00 mm thick and for shutter plain glasspanes 5 mm thick for top panel sand 12mm thick both side laminated phenol bonded particle boardpane ls for bottom panels etc .,I.S.I.mark , heavyduty , Hydraulic floor spring of 150 Kilogram capacity , having heavy duty concealed lock , necessary beading ,glazingclip s,PVC gaskets ,250mm length aluminium towerbolts , 150 mm dia .padhandle , etc. as per detailed design and drawing or as directed by engineer incharge including all materials , labours, and Equipment etc completed

Providing and fixing 40 mm diameter and 1.5 mm thick Stainless steel hand railing in S.S.304 Grade including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete

Providing and fixing mild steel grill work for windows,ventilators,etc.15 Kilogram /OneSquare Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.

Providingand fixing 900 mm high S.S.304 Grade Stainless steel railing with 40 mm diameter and 1.5 mm thick at top ,40 mm diameter and 1.5mm thick vertical supports spaced at 1.5 m center to center and 8mm thick toughened glass including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete

Providing and fixing mild steel grillwork for windows ,ventilators etc. 20Kilogram /One Square Metre as per drawing including fixtures ,necessary welding and painting withone coats of anticorrosive paint and two coats of oil painting complete

Providing and laying in trenches 15mm dai .CPVC pipe including necessary excavation , fittings .Refilling trenches etc . Complete Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc.

Providing and laying in trenches 25mm dai. CPVC pipe including necessary excavation ,fittings .Refilling trenches etc.complete .Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc.

Providing and laying in trenches 50mm dai. CPVC pipe including necessary excavation ,fittings .Refilling trenches etc.complete .Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc.

Providing and fixing 8cm rigid PVC Nahani trap including PVC grating ,bend , connecting piece of UPVC pipe upto the outside face of wall , making the good damaged surfaceandtestingetc.complete.

Providing and fixing oval type under counter washhand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180mm thick stone black kadappa frame work including chromiumplated coupling bottle-Trap using CERA company or equivalent oval typa wash basin mode lno 3448 as per detailed drawing or as directed by engg incharge etc complete.(Countersize1.20mx0.60m)

Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete.

Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection etc. complete.

Providing and fixing white glazed urinal with Pressmatic auto closing valve having flow rate upto 4.0 Litr / Minute of Jaquar / Cera / Hindware / Perryware or equivalent make with P.V.C. waste pipe with fitting arrangement etc. complete as directed by Engineer in charge .(Makesh all conform to manufacturer's Green product and shall got approved Engineer In Charge.)

Providing and fixing screw down for 15mm dia. wheeled stop tap of brass including necessary sockets/union nut complete

Providing and fixing screw down for 25mm dia. wheeled stop tap of brass including necessary sockets/union nut complete

Providing and fixing screw down for 50mm dia. wheeled stop tap of brass including necessary sockets/union nut complete

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Providing and fixing 15mm dia . Screw down bib/stop tap of brass including necessary socket union nut complete.

Providing and fixing 25mm dia . Screw down bib/stop tap of brass including necessary socket union nut complete.

Providing and fixing push cock (Self closing tap) symet type of 15mm dia.including necessary socket, testing etc. complete.

Providing and fixing 50mm dia. Water meter with non-return valve including necessary water meter valve box making lock arrancement and lock.

Providing , constructing and fixing 250 mm dia .Inspection chamber made up of UPVC material of thickness 3.5 mm and height of 259mm with inlet and outlet of 110mm dia . with 75mm dia .U Trap , Ultra shaft pipe of Upvc material having height of 470mm and fixing Ultra 250mm dia . UPVC cover and frame in 150mm thick inc.c.1:2:4, having crushed sand bed of 100mm thick of size 550mm dia . Including excavation and refilling the sides of chamber by crushed sand cushioning 150mm thickness, connecting all required UPVC fittings with rubber lubricant etc. complete.

Providing and laying for 150 mm dia salt glazed stoneware pipe including fittings Such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete.

Providing and fixing ISI 1729/2002 grade 100mm dia Cast Iron Soil Pipes With lugs including plug bend necessary fittings such as bends , tees , single junction, double junction , slotted vent ,offsets on wall or into the ground including filling joints with cement mortar 1:2 proportion fixing on wall by means of galvanised Mild Steel bracket of 30 x 5mm plate and 8mm square rod with Galvanised Iron clamp with washer as per design ,drawing and as directed to keep pipe 50mm away from w all including necessary scaffolding and painting the exposed faces with one coat of red lead oilpaint and two coats of white oil paint including removing the existing pipe if necessary and conveying and stacking in PWD Chowky or as directed by Engineer-in-Charge.

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters

Providing and fixing 45 cm wide mildsteel ladder of 40mm x 6mm mildsteel flat stringers and steps of 18 mm dia. Mildsteel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60 cm x 30 cm x 30 cm and painting the ladder complete. (AntiCorossive Paint)

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.

Providing waterproof plaster in W.C. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kg. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete.

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1kg/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 kg/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 kg/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete.

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.

Providing and applying a base coat comprising of 1 Kilogram Polydee-MC and 1 Kilogram fresh cement after wetting the surface followed by drying the surface for 2 days,apply primer coat of TP-40 and after drying ,applying Polydee-11 two component (mixing ratio 2A:1B)) Anti bacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8 hrs.covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete.

Providing and fixing 20 to 25 mm thick rough shahabad box type water proofing for basement or under ground floor on a base of Cement concrete 1:3:6 ,including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal , secrete (RMW), Algae proof or other a like water proofing liquids ,raking of joints upto 35 mm depth ,filling the joints with 6mm size crushed metal ,hand grouting with cement slurry ,curing and cleaning ,with 7 years guarantee on court fee stamp of Rs.100/-with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete

Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand,

Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area .wall primer with brush by adding mineral turpentine oil by 8 to10% or water by 15 to 20% allowing to dry for 6 to 8 hours After applying acrylic wall putty with appropriate prpportion of water of allow to dryf or period of 4 to 6 hours of activity.Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1 st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45% or 65 to 70%by roller. (With prior approval of S.E.)

Conveying all debris upto 15 km away from site

Providing and fabricating structural steel work in rolled sections like joists, channels ,angles ,tees etc.as per detailed design and drawings or as directed including cutting, fabricating ,hoisting , erecting, fixing in position making riveted / bolted / welded connections without connecting plates ,braces etc .and including one coat of anti corrosive paint and over it two coats of oil painting of approved quality and shade etc.complete.

Providing expansion joints in R.C.C.framed structure (at floor level) with premoulded filler 25 mm thick and 3 mm thick aluminium plate as required, bitumen poured filler and fixing T.W. battens on rear faces etc. complete as directed.

Providing and applying waterproofing treatment using acrylic polymer modified cement based waterproofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre/ Kilogram with two coat using approved chemicals form asonryandconcrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete.

Providing and fixing Ductile iron Man Hole Covers/ Strom Water Grating and Grating with frame of Various sizes,weight and types and load bearing capacity as per EN-124,equivalent NECO with prior approval of concerned Superitending Engineer.

Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete

Boring/drilling borewell of 300mm dia for casing/strainer pipe,by suitable method prescribed in IS:2800(partI), including collecting samples from different strata,preparing and submitting strata chart/borelog,including hire & running charges of all equipments, tools, plants& machinery required for the job,all complete as per direction of Engineer in charge, upto 90m depth below ground level.

Supplying, assembling,lowering and fixing in vertical position in borewell, unplasticized PVC medium well-casing pipe of 150mm dia, conformig to IS:12818,including required hire and labour charges, fittings & accessories etc.all complete,for all depths, as per the direction of Engineer in charge.

Providing and laying weep holes of 100mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete.

3D painting - Designing, Conceptualization & painting of 3D artistic on any surface at all height and location as directed. The paint should be used for the artistic painting is high quality acrylic paint. painting should be coated with weather proof warnish.

Designing, Providing & Installation of Wall mural related to freedom fighter, outside the jail wall as shown in the picture below . The material for this sculpture is Fibre/FRP . The Length of the mural should be minimum 15m with minimum height of 3 m, Size of the mural shall be in proportionate to the height of the sculpture. Thickness of FRP material should be 5-10mm. Including all cost of design, Making models (if any), making mural, inspection charges, Transportation, Fixing at site, Construction of Foundation in RCC- M20 Grade Concrete including Reinforcement(TMT/FE 500), Pedestal including all material required for fixing the mural, coating the pedestal with Coaltar Epoxy Coating, all Filling material upto the base of mural, polishing and painting of the mural, as directed by Engineer in Charge. (Variation in size off mural shall be +-10% in Length, Width and Height shall be permitted.) Inclusive all taxes Exclulding of GST .etc. Complete.

Providing detailed layout plan of area in scale1:500 including carrying out contour survey and detailed Engineering plane table Survey with the help of 24 Alidade .The dolomite area measurement of the plot and structures ,trees ,overhead line and underground service amenities with in the area, with triangular method and giving detailes of the structures, such as total area, type of building and distance from all corners taking trial pit 0.5 x 0.5 x 2.00 m.-2 Nos. per acre and collection of record from city survey / D.I.L.R. authorities and authentication.The plan shall be traced on 75 micron polyster film and shall be submitted along with three Amoniaprints. The contour levels shall be marked at 0.5 Meter intervals.Note:-The items includes-1)Traversingworkwiththeodoliteandsteeltape .2)LevellingGridWorkoftheterrain. 3)DetailedEngineeringSurveyandcontouringworkoftheterrain. 4)Plottingwork. 5)Collection of Record. a)upto1Acre

Design,supply and Installation of suitable steel structure which shall be claded with type II fabric if Mehler/Ferrari or equivalent make along with all necessary and accessories.Profiel plate will be galvanized with treaded end of make Usha martin, Anchor fasteners of Hilti,make of steel will be TATA/JINDAL or equivalent make.Test Certificate for MS will be submitted alongwith 1 year of maintenance of structure.

Providing,aupplying,fabricatingandfixingpanelofaluminiumcompositepanelcladdinginapprovedshapemadeoutof4mmthickACPsheetmaterialconsistingof3mmthickFRgrademineralcorefollowingNBCpartIVFireandlifesafety(having2hoursfireresistanceinaccordancetoASTME119-12andBS476part6and7classO)sandwitchedbetweentwoaluminiumsheets(each0.5mmthickofAA5005/AA3105grade)Thealuminiumcompositepanelcladdingsheetshallbecoilcoatedwithkynar500basedPVDF/Lumiflonbasedfluropolymerresin(having70:30ratioofPVDFandacrylic)coatingofapprovedcolourandsg=hadeontopfaceandpolymer(service)coatingofbottomfaceasspecifiedusingstainlesssteelscrews,nuts,bolts,washers,cleats,weathersiliconsealent,backerrodsetc.overallweightoftheACPshallnotbelessthan7.5Kilogram/ One Square Metre)

Providing and Fixing Rubber flooring with 100mm p.c.c. & 100 soling.

Providing & Supplying & installation of Air walker etc.complete.Spec.- As Directed Engineer-in-charge.

Providing & Supplying & installation of Seats & Waist Machine etc.complete.Spec.- As Directed Engineer-in-charge.

Providing & Supplying & installation of Abdomen Rack etc.complete.Spec.- As Directed Engineer-in-charge.

Providing & Supplying & installation of Pull down device etc.complete.Spec.- As Directed Engineer-in-charge.

Providing & Supplying & installation of Sit & Push up device etc.complete.Spec.- As Directed Engineer-in-charge.

Providing & Supplying & installation of Pendal trainer & parallel bar etc.complete.Spec.- As Directed Engineer-in-charge.

Providing & Supplying & installation of Walking machine etc.complete.Spec.- As Directed Engineer-in-charge.

Providing & Supplying & installation of Health ridding machine etc.complete.Spec.- As Directed Engineer-in-charge.

Providing & Supplying & installation of Body building seesaw etc.complete.Spec.- As Directed Engineer-in-charge.

Providing & Supplying & installation of Torsinal weast treadmill etc.complete.Spec.- As Directed Engineer-in-charge.

Providing & Supplying & installation of leg recovery machine etc.complete.Spec.- As Directed Engineer-in-charge.

Providing & Supplying & installation of Seated leg body frame etc.complete.Spec.- As Directed Engineer-in-charge.

Providing & Supplying & installation of lumbosacral device etc.complete.Spec.- As Directed Engineer-in-charge.

Providing & Supplying & installation of Double wking machine etc.complete.Spec.- As Directed Engineer-in-charge.

Soft-Coated DGU - (14.3.1) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalization & drainage and protection against fire hazard including:(14.3.2) Inclusive of S.V.M. items for supplying of high performance low E coated glass DGU made up of 6mm thk. Soft coated glass +12mm air gap +6mm clear HS. All glasses to be toughned soft coated glass to have a U-Value range of 1.6 to 1.8 of any colour as approved by engineer in charge. (14.3.3) Fabricating and supplying serrated M.S. hot dip galvanized / Aluminum alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimensional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon separator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.(14.3.4) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.laboratory, field tests on the assembled working curtain wall with aluminum composite panel cladding, cleaning and protection of the curtain wall with aluminum composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminum items The Contractor shall provide curtain wall with aluminum composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.(14.3.5) Providing and fixing in position flashings of solid aluminum sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it water tight. (14.3.6) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge.

BASIC TEST OF CEMENT Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness.

BASIC TEST OF AGGREGATE. - a) Water Absorption, Specific Gravity,Impact Value, Crushing Value.

BASIC TEST OF AGGREGATE. - b) Sieve Analysis.

BASIC TEST OF AGGREGATE.- c) Abrasion Value.

BASIC TEST OF AGGREGATE.- d) Flakiness Index & Elongation Index.

BASIC TEST OF AGGREGATE. - e) Stripping Value. (for Bituminous Work)

BASIC TEST OF AGGREGATE.-f) Soundness

FINE AGGREGATE. - a) Fineness Modulus ( Sieve Analysis ),Silt & Clay Content

FINE AGGREGATE. - b) Chloride & Sulphate Content.

FINE AGGREGATE. - c) Silt Factor.

CONCRETE - a) Compressive Strength OF C.C. Cube (Set of 3 cubes)

CONCRETE - b) Concrete mix design by Accelerated curing method. (By Accelerated curing method)

WATER PH Value, Sulphate & Chloride Content.

STEEL BAR TESTING - a) Upto 16 mm (Set of 3 Bars)

STEEL BAR TESTING - b) Above 16 mm (Set of 3 Bars) (Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress.)

SOIL / MURUM Plate Load Bearing Test.(Excluding Transportation)

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS: 2185 (Part3)-1984 in extra fine jointing or tar of fixo block of Ultra Tech or equivalent in super structure including striking joints, raking out joint sand scaffoldingetc.Complete.(The test shall be carried out conforming to IS:6441 (Part I) - 1972) SSR ITEM.-27.15

Providing and applying one pack bonding coat between concrete members like RCC slabs, columns, beams, chajjas, pardis etc and cement mortar plaster using Hack Aid Plast of approved make & approved by Engineer in charge. Clean the concrete surface thoroughly to remove dust, dirt, grime, deshuttering oils and rub down to a clean surface. Apply Hack Aid Plast of approved make & approved by Engineer in charge by spray on the entire concrete surface. Provide a lean cement - sand dash coat over the same. Allow the dash coat to set for around 24 hours. Further plastering as per specifications can continue.SSR - 50.09

Providing and fixing in position Gypsum board false ceiling with 12.5mm thick Gypsum boards, screwed/ fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25x50mm maximum center to centerd is tance of 600milimetre per imeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to gal vanized iron grid with necessary screws. The boards should be taped and filled from under side to give smooth, seamless ceiling. The rate should include necessary additional ceiling section sand intermediate channels. Additional intermediate channels should be fixed to straph angers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cutouts, painting including labour, material, liftsetc.all complete. SSR ITEM.- 38.51

Providing and applying gypsum plaster (with Gypsum material of Gypsum India / Mega Signor equivalent make) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface (Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete.SSR - 32.31

Providing and applying 2 coats of 100% Pure acrylic low VOC and APEO & HCHO free water based paint of approved colour that belongs to class1 flame spread resistance of approved make Paint should provide durable and long lasting silk finish with a high crack tolerance of up to 1mm. Paint should have an oustanding wash ability with high resistance to wide range of bacteria and fungus. Paint has to be applied on smooth and uniform surface prepared by an acrylic co polymer low VOC & Odour putty. This surface should be primed with water based low VOC Primer. The work activity should cover all aspects of applying paints from surface preparation as directed by Engineer in charge.SSR - 48.11

Providing and fixing Indian teak wood planking 25mm thick for flooring plained on both sides, tongued and grooved including scaffolding, ifnecessary, and one coat of primer etc. complete. SSR - 37.01

Providing and fixing in position extruded aluminium partitions having frame made out of extruded tubular section of size 65 mm x 40 mm (50mm x 50mm) with 12mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to IS 129231990, laminated (gypsum finish as per dwg) on both sides, Nova teak or equivalent with aluminium glazing clips of size 12 mm x 12 mm (conical) as per drawing etc. complete. SSR - 39.73

Providing and fixing 3.5 to 4mm thick Veneer finish wall Panaling made out of 50x25mm (finished size) C.C.T.W.frame work or size of 600x600mm center or as per site condition covered by 6mm (12mm )thick marine plywood of the generally confiriming toI:S710-1980 finished with 3.5 to 4mm thick matching Veneer of approved color and in satin wallnut groov matched veneer pattern and design including melamine polishing & design with anti termite treatment etc.to plywood and wood work with ten years guarantee bond etc. including all lead and lifts complete as per Architects Drawing and instructions of Engineer In charge.SSR - 37.26

Providing and fixing Indian teak wood plank wall 20 mm thick plain under side tongued and grooved including iron screws, scaffolding, ifnecessary, including one primer coat on under side and one coat of coal tar on upper side etc. complete.SSR - 37.05

Item No.10Providing and applying french polish to new wood work, for required finishing including. knotting, preparing the surfaces, scaffolding etc. complete as directed. SSR - 34.06

Providing and fixing false ceiling of 10 to 12 mm thick decorative boards of fibrous plaster of paris including scaffolding if necessary all architectural work like mouldings, cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards etc.complete. (excluding frame work, runners and mild steel suspenders).SSR - 38.17

Providing and fixing in position powder coated aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineer in charge with all necessary alluminium sections including necessary fixtures and fastening such as 5mm thick clear float glass (8mm toughened Glass) etc.complete.SSR 39.53

Providing and fixing in position aluminium partly openable and partly fixed window of any size as per detailed drawing and as directed by Engineer in charge with all necessary alluminium sections including necessary fixtures and fastening with 5 mm thick float glass (8mm toughened Glass) etc.complete.b) With powder coating Note While arriving at the rate of item of item weight at 6.90 Kilogram/Square Metre is considered.SSR 39.55

Providing & Fixing in position, 1000mm wide Auto-glow Aluminium extruded strips on auditorium steps as per Design & Instructions & Complete in all aspects. Make Pic coloor NexusSSR - 51.14

Providing & Fixing in position, Acoustical Panelling made from Printed Fabric wrapped Compressed polyester fibre non woven 9mm panels on, 50x50mm sal-wood frame of 600x600 c to c having wooden supports from wall of required length, in front of 1000 gsm synthetic wool 50mm thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects.including all materials labour,finishing etc complete.SSR - 51.01

Providing and fixing Modular false ceiling of 600x600 mm center to center and 13mm thick square mineral fiber board (perforated) to be fixed on frame work of alluminium sections for suspended false ceiling consisting of alluminium T2”x1½” (50mmx40mm) weighing 0.39Kilogram / mat 60cms center center and fixed with ½”x½” (15x15mm) flanges weighing 0.19Kilogram/m suspended on 6mm dia mild steel rod weighing 0.22 Kilogram/m, fixed on wall and beams includin grounding of the edges with alluinium T of 2”x1½”(50mmx40mm) weighing 0.39Kilogram/m etc. (all alluminium sections shall be anodized) including all labour, material, lifts etc. complete.SSR - 38.52

Providing and fixing teak wood cover moulding 35x20 mm over doors and windows (column and false ceiling) in the required shape and size as per drawing, including all mouldings and finishing with french polishing etc. complete.SSR - 39.93

Providing and fixing teak wood cover moulding 70x20 mm over doors and windows (column and false ceiling) in the required shape and size as per drawing, including all mouldings and finishing with french polishing etc. complete.SSR - 39.93

Providing and fixing 50 mm diameter and 1.5 mm thick Stainless steel hand railing in S.S.304 Grade including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. completeSSR - 51.111

Providing and fixing in position Phenol bonded Bamboo wood flooring with planks of sizes 14mm thick, 1800 mm length (minium) and 130 mm wide (minimum), in approved colour, texture and finish, having Performance Appraisal certified (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded poly ethylene foam sheets having density 40kg/One One Cubic Metre, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and door reducer of size 1900mm x 44mm, whereever required. The bamboo wood planks shall have minimum density of 1000 kg/One One Cubic Metre & minimum Hardness 1000kgf. with Eco friendly UV coating, all complete as per direction of Engineer in -charge. Ground floor

Item No.1 providing and fixing raised platform that include aluminum flaring of box section 50mm x50mm from jindal catalogue as per detail *covered with back ply of 18/25mm thick as per the detailed drawing.

Providing and fixing Table of size (1.2 x1.2 x.75) with 3.5 to 4mm thick Veneer finish over 25 mm thick marine plywood with trey made up of marian ply with neccesary hardware generally confiriming toI:S710-1980 finished with 3.5 to 4mm thick matching Veneer of approved color and in satin wallnut groov matched veneer pattern and design including melamine polishing & design with anti termite treatment etc.to plywood and wood work with ten years guarantee bond etc. including all lead and lifts complete as per Architects Drawing and instructions of Engineer In charge MR

Providing and fixing corner table with paper finish as directed by engineer incharge etc complete

printing and applying Vinyl Printed Graphics with poly corbonet sheet over Finished wall with providing and fixing digital print graphics of 2-3mm thick sheet of required size ,shape and vinyl cutting ,with printig of 1200 DPI 8 pass HP on 165 GSM vinyl with design as per the graphic designer and with technical specifications and drawing according to the directions of designers and design to be approved by the architect. MR

14mm thick wall Skirting of wooden laminated skirting -Providing & fixing in position Phenol bonded Epitome wooden laminated in wall skirting with planks of size 14mm thick, size as per the vendors product and design approval ,in approved colour ,texture and finish over the approved ceramic tiles layed below it,wooden laminated flooring having Performance Appraisal Certificate(PAC) issued by Building materials & Technology Promotion Council (BMTPC). The skirting shall be fixed SS screws & rawl plugs, over underlayment of 4mm thick expanded polyethylene foam sheets having density 40Kilogram/cum,over prepared surface of ceramic tile skiritng.The wooden laminated planks shall have minimum density 1000 Kilogram /cum & minimum Hardness 1000Kilogram all complete as per direction of Engineer in-charge MR

FibreGlass Composite Column Cladding / FRP FRP Column cladding Providing,supplying and fixing of FRP ornamental cladding -of required shape and size with (4/5 ) mm thickness as per the specifications by the vendor and design provided by the architect .The cladding should withstand external pressure .with interlocking arrangements, required rubber seals to arrest waterleakage due to surface unevenness including frame work inside as per requirement ,with lifting eyebolts.And as per specifications mentioned in the Technical spectications and product features excluding GST MR

Crossword Table Chairs -providing and installing best qualityTEAK WOOD frame and legs for crossword chair ,finished with all exposed surfaced with melamine polish,size and pattern as per the specifications,wood should be treated with ant termite resistant treatment as approved by the architect. - 450 x 450 mm MR

FRP TREE - chavdi FibreGlass Composite Column Cladding / FRP FRP tree Providing,supplying and fixing of FRP tree -of required shape and size with 4/5 mm thickness as per the specifications by the vendor and design provided by the architect .The tree (frp)should with stand external pressure .with interlocking arrangements, required rubber seals to arrest waterleakage due to surface unevenness including frame work inside as per requirement ,with lifting eyebolts.coated with approved paint as per specifications provided by the vendor and approval of architect ,paint of superior quality with minum guarantee of 5 years .And as per specifications mentioned in the Technical spectications and product features excluding GST - 2100mm high, 1200mm dia MR

wooden stool - chavdi providing and installing wooden stool -best quality TEAK WOOD finished with and all exposed surfaced with melamine polish,size and pattern as per the specifications,wood should be treated with ant termite resistant treatment as approved by the architect. - 400 mm dia and 500 mm high MR

wooden chair - stage -best quality TEAK WOOD chair finished with all exposed surfaced with melamine polish,size and pattern as per the specifications,wood should be treated with ant termite resistant treatment as approved by the architect. - 450 x 450 x 500mm high MR

Wooden Library Table--best quality TEAK WOOD finished with and all exposed surfaced with melamine polish,size and pattern as per the specifications,wood should be treated with ant termite resistant treatment as approved by the architect. - 2745 x 1370 x 750mm MR

Wooden Storage -best quality TEAK WOOD finished with and all exposed surfaced with melamine polish,size and pattern as per the specifications,wood should be treated with ant termite resistant treatment as approved by the architect. - 1590 x 500 x 2400mm MR

wooden decorative border photo frames -best quality TEAK WOOD finished with and all exposed surfaced with melamine polish,size and pattern as per the specifications,wood should be treated with ant termite resistant treatment as approved by the architect. MR

MS Flat Plate - curvilinear as per design 3feet in diameter and 4 feet in height. Providing & Fixing in position, MS fabrication work using 2mm thick plate or 25mm square pipe of 2 mm thick with duco finish approved size and shape etc. finish as per the specification provided by the architect for hanging painting etc, as per Design & Instructions & Complete in all aspects . including all materials labour,finishing etc complete work. MR

Item No.19 FRP - Statues / Faces hanged-FRP statues with approved paint finish ,Providing,supplying and fixing of FRP ornamental statues -of required shape and size as per the specifications by the vendor and design provided by the architect .The cladding should withstand external pressure .with interlocking arrangements, with lifting eyebolts.And as per specifications mentioned in the Technical spectications and product features excluding GST MR

Providind and fixing HP-Inkjet sticker print finish with Aluminium Box section if size 50mm x 50mm with anodized pested, all fittings,welding etc. Complete. MR

Providing and fixing Indian best quality Teak Wood with engrave as per design on wall 20 mm thick plain under side including iron screws, scaffolding, ifnecessary, including one primer coat on under side and one coat of coal tar on upper side etc. complete.

Wallpaper Printed over Finished wall providing and applying non woven heavy weight 350 GSM latex saturated non woven paper pasted on poly carbonet sheet,considering the total quality of rolls including wastage the installation should be as per the specification of the vendor,the wall surface should be well primed and smoothened before the application of the wallpaper. MR

MS STAIRCASE for Loft Access -Providing & Fixing in position, MS fabrication ladder work with anodize coating of size (1.0 x3.0 meter) using , MS flat plate of 2 mm thick ,channel ,equal angles section of 4mm thick etc of approved finish as per the specification provided by the architect forMS staircase etc, as per Design & Instructions & Complete in all aspects . including all materials labour,finishing etc complete work ,the design should be of approved design from the architect and specification as per the drawing provided . MR

CatWalk - MS Grid Fabrication at 600 x 600 mm C/C with MS Flat Plate Platform to walk Providing & Fixing in position, MS fabrication work using angles, MS square tube ,angle ,flat plate etc of approved finish as per the specification provided by the architect for catwalk etc, as per Design & Instructions & Complete in all aspects . including all materials labour,finishing etc complete work MR

Providing and fixing Concrete Finish Fibre Board Panels (1200 X 2400mm) on wall with groove as per Design given by Architect. 14mm thick concrete finish fibre board panel (1200 wide and 2400mm height )-Providing & fixing in position Phenol bonded concrete finish fibre board on wall with grooved as per design given by architect as per certificate issued by Building materials & Technology Promotion Council (BMTPC). The concrete finish fibre board shall be fixed SS screws & rawl plugs, over prepared surface.The concrete finish fibre board should be of reputed make and all installation to be complete as per direction of Engineer in-charge MR

Providing and fixing Canvas / Fabric Printed Picture of Balasaheb Thackeray as per Graphics printing and applying Vinyl Printed Graphics over Finished wall providing and fixing digital print graphics of 2-3mm thick sheet of required size ,shape and vinyl cutting ,with printig of 1200 DPI 8 pass HP on 165 GSM vinyl with design as per the graphic designer and with technical specifications and drawing according to the directions of designers and design to be approved by the architect. MR

FRP design as per Architect and Vendor Specification/Design FRP with approved paint finish,Providing,supplying and fixing of FRP Item of required shape and size as per the pecifications by the vendor and design provided by the architect .The cladding should withstand external pressure .with interlocking arrangements, with lifting eyebolts.And as per specifications mentioned in the Technical spectications and product (2.0 X0.5) 1.0 sqm

Providing & Fixing in position,acralic sheet vinyl print pested on backlit MS Box Section in curvilinear form hanged from Slab bottom as per design, MS fabrication work using 25 mm square pipe of 2/4 mm thick, MS flat plate of 2mm thick ,channel , etc of approved finish as per the specification provided by the architect for , as per Design & Instructions & Complete in all aspects . including all materials labour,finishing etc complete work ,the design should be of approved design from the architect and specification as per the drawing provided . MR

Backlit Stretch Fabric with print as per theme given by the graphic designer or Architect Providing and fixing backlit streched fabric with print as per the theme provided by the archirect ,specifcations as per the vendor .backlit streched fabric should be of approved make and secured with approved ms slips as per the details of vendor and design to be approved by the architect. MR

Providing and fixing 12mm thik Acrylic boxing with framing (50 x 50mm), with backlit and provision of LED screen above MR

Providing and fixing Ply Table with 3.5 to 4mm thick Veneer finish over 19mm thick marine plywood of the generally confiriming toI:S710-1980 finished with 3.5 to 4mm thick matching Veneer of approved color and in satin wallnut groov matched veneer pattern and design including melamine polishing & design with anti termite treatment etc.to plywood and wood work with ten years guarantee bond etc. including all lead and lifts complete as per Architects Drawing and instructions of Engineer In charge

Providing and fixing of 25 mm marine ply wood on MS square pipe frame in size of 4 feet x6 feet x1 feet with rubber sheet finish MR

Providing and fixing of LED flexible profile lights flush to FRP as per the drawing by the architect ,product to be of reputed make and of approved finish as per architects approval and vendors availability MR

Providing and fixing 3mm Homegenous Vinyl flooring - color, design as per Architect, including installation and complete

printing and applying Vinyl Printed Graphics without poly corbonet sheet over Finished wall with providing and fixing digital print graphics of 2-3mm thick sheet of required size ,shape and vinyl cutting ,with printig of 1200 DPI 8 pass HP on 165 GSM vinyl with design as per the graphic designer and with technical specifications and drawing according to the directions of designers and design to be approved by the architect. MR

Providing and fixing Marine Ply Table with 3.5 to 4mm thick Veneer finish over 19mm thick marine plywood of the generally confiriming to I:S710-1980 finished with 3.5 to 4mm thick matching Veneer of approved color and in satin wallnut groov matched veneer pattern and design including melamine polishing & design with anti termite treatment etc.to plywood and wood work with ten years guarantee bond etc. including all lead and lifts complete as per Architects Drawing and instructions of Engineer In charge.

Mounts - fabric wrapped with PU sponge of various shape and size like 1feet by 1.5 feet app. Make and density as per engineer / architect specs and approval

Providing and installing Jungle Gym Play equipments (slide of size 2feet. by 6 feet, steps of size 2feet. by 7 feet , climbing, and jumpping - 4feet in dia. 4 feet in height ), designed by the Vendor made up in best quality TEAK WOOD finish with app. Clear polish as per approval. in size of 10 feet by 8 feet and 10 feet in height. with . necessary installation accessories etc complete. MR

providing and installing of Ceiling Hanged Cloud Shaped Lights 750mm length fixed on SS flat plate and 6mm Acralic sheet fixed from ceiling slab bottom with 12 mm SS Rod support /steel rope of approved finish and shade as per architects approval and vendors availability MR

Providing and installing of fibre optic Lights on 12mm ply base fixed from ceiling slab bottom finished with approved vinyl finish of approved shade as per architects /engineers specification and vendors availability MR

Printing and applying Vinyl Printed Graphics over 3D laser cut Sunboard of 12mm thickness with Vinyl graphics over it as per theme by the Graphics Designer / Architect ,digital print graphics of 2mm thick sheet of required size ,shape and vinyl cutting ,with printing of 1200 DPI 8 pass HP on 165 GSM vinyl with design as per the graphic designer and with technical specifications and drawing according to the directions of designers and design to be approved by the architect. MR

Providing and fixing velvate finish curtain with SS rod with sockets and finishing etc. complete curtain sockets to be of reputed brand and finish to be as per the approval of architects design ,cost will include material,installation labour and complete finished work. MR

3 seater Sofa - Providing & fixing Sofa Set of 3 with wooden framed and legs with all exposed surfaces with melamine polish with rubber stopper at the bottom ends of legs,cusion to be of approved standard density foam covered with approved leatherite of reputed make and shade,pattern as per approved design and finish as per the requirement of the architect DIMENSION Length:1.9m x 0.725m(breadth ) x 0.45 m (height ) Seating Capacity: three Seater MR

Single seater Sofa -Providing & fixing single seater sofa with wooden framed and legs with all exposed surfaces with melamine polish with rubber stopper at the bottom ends of legs,cusion to be of approved standard density foam covered with approved leatherite of reputed make and shade,pattern as per approved design and finish as per the requirement of the architect DIMENSION Length:0.75m x 0.725m(breadth ) x 0.45 m (height ) MR

centre table - Providing & Fixing of center table 0.6 x 1.2 x 0.4 m @ - made up of 18+18mm Thick wooden top with polished surfaces and edges .with best qualityTEAK WOOD framing and legs of approved finished polish ,design and pattern as per the detailed drawing provided by the architect ,cost willbe inclusive of carpentry and material with final fully completed work. MR

side table -Providing & Fixing of side table 0.6 x 0.6 x 0.4 m @ - made up of 18+18mm Thick wooden top with polished surfaces and edges .with best qualityTEAK WOOD framing and legs of approved finished polish ,design and pattern as per the detailed drawing provided by the architect ,cost willbe inclusive of carpentry and material with final fully completed work. MR

wardrobe unit - wooden finish with app. Polish - 0.6 x 0.6 x 2.4 m Providing & Fixing of wardrobe unit 0.6 x 0.6 x 0.24 m @ - made up best qualityTEAK WOOD shutters of best quality and wooden partitions with polished surfaces and edges ,design and pattern as per the detailed drawing provided by the architect ,cost willbe inclusive of carpentry and material with final fully completed work. MR

photo booth - Providing & Fixing of photo booth of 1.2x1.8x2.1 m @ - made up of 18+18mm Thick wooden walls of best quality TEAK WOOD and wooden partitions with polished surfaces and edges ,design and pattern as per the detailed drawing provided by the architect ,cost willbe inclusive of carpentry and material with final fully completed work. MR

Artifacts table - Providing & Fixing of side table 1.2 x 0.6 x 1m @ - made up of best quality teak wooden top with polished surfaces and edges .with TEAK WOOD framing and legs of approved finished polish ,design and pattern as per the detailed drawing provided by the architect ,cost willbe inclusive of carpentry and material with final fully completed work. MR

Table as per design - Providing & Fixing of side table 3 x 0.6 x 0.45m @ - made up of 18+18mm Thick wooden top with polished surfaces and edges .with TEAK WOOD framing and legs of approved finished polish ,design and pattern as per the detailed drawing provided by the architect ,cost will be inclusive of carpentry and material with final fully completed work. MR

Table as per design - Providing & Fixing of side table 1.8 x 0.75 x 1.05m @ - made up with duco paint finish of approved shade as per drawing with Best qualityTEAK WOOD framing and legs with duco paint and design and pattern as per the detailed drawing provided by the architect ,cost will be inclusive of carpentry and material with final fully completed work. MR

Table as per design- Providing & Fixing of side table 0.45 x 0.45 x 1.05m @ -made up of best quality TEAK WOOD with duco paint finish of approved shade as per drawing ,design and pattern as per the detailed drawing provided by the architect ,cost will be inclusive of carpentry and material with final fully completed work. MR

Item No.60 Table as per design - Providing & Fixing of side table 1.35 x 1.35 x 1.5m @ - made up best quality wood with duco paint finish of approved shade as per drawing ,design and pattern as per the detailed drawing provided by the architect ,cost will be inclusive of carpentry and material with final fully completed work. MR

Providing and fixing of suspended name tags of acrylic /MDF of 8mm thick of best quality acrylic /MDF (if MDF coated with duco paint of approved finish and shade )laser cut as per the detailed design provided by the architect and suspended by the ceiling using MS rod of approved finish. MR

IName tages / Frames - Printed Vinyl over Sunboard / Acrylic as per graphic design providing and fixing of best quality Sunboard/arcylic of 4mm thk with vinyl print over the sunboard as per the detailed design provided by the architect. and graphics as per graphic designer. MR

Providing & Fixing of Periscope Table as per design - wooden finish white duco paint / Polish - 0.5 x 0.5 x 0.9m @ -made up of best quality teak wood with duco paint finish of approved shade as per drawing ,design and pattern as per the detailed drawing provided by the architect ,cost will be inclusive of carpentry and material with final fully completed work. MR

Providing,supplying and fixing of Transperant FRP made up globe of size 6 feet in dia. with stain glass paint finish with appropriate size and shape etc. complete. as per the specifications by the vendor and design provided by the architect . MR

Excavation for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed in earth, soil of all types, soft murum, including removing the excavated material up to a distance of 50 mtrs. for a depth of 30 cms. Rate= Rs.71.70 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra 2022-23 Page No 11 Sr No.3)

Supplying on site fresh Garden soil (free from stones rubbish like dried grass roots, other such materials) for excavation area of depth of 30 cms.( consolidated thickness). Rate= Rs.391.50 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23 Items of garden work, Page No 13 Sr No.36a)

Supplying on site well decomposed Farmyard Manure for excavation area of depth of 30 cms. (Consolidated thickness). Rate= Rs.125.55 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra 2022-23 Page No 13Sr No.36b)

Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting reqired plant species, lawn grass as directed etc. complete for required depth 30 cms. for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed/ ground cover. (1/10 of semiskilled labour) Rate= Rs.77.76 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR ,2022-23 Page No 12 Sr No.23)

Filling fresh garden soil / silt & manure in excavated area of depth 30cms. Add-Increased in percent for Corporation Areas @ 5% Rate= Rs.27.02 (As per Parks and garden, PWD Government of maharasthra DSR 2022-23 Sr No.13)

Providing on site well established (free from weeds /disease etc.) ready to fix lawn turf in slabs/ rolls of required variety as directed. Rate= Rs.215.00 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Sr No.47)

Mini Tagar (Bag Size 9"x11", hight of plant 20 cm to 45, cm) Rate - Rs. 55 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 17 , 1 (b)Flowering Shrubs item No 13)

Duranta golden Well Developed, Healthy Foliage / Half Bloom Stage , Free from Pest and Diseases. (Bag Size 8" x 10"", hight of plant 30 cm to 50, cm) Rate - Rs. 42 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 27 , 7(b) Hedges item No 3)

Malphigia (Bag Size 10''10", hight of plant 45 cm to 60, cm) Rate - Rs. 45 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 20 , 1 (b)Flowering Shrubs item No 20)

Canna Dwarf (Bag Size 7"x8", hight of plant 30 cm to 45, cm) Rate - Rs. 20 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 21, 4.Bulbus/Rhizomatous plants item No 3)

Mini Ixora (Bag Size 8"x10", hight of plant 30 cm to 45, cm) Rate - Rs. 55 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 17 , 1 (b)Flowering Shrubs item No 8)

Alpinia (Bag Size 13"x13", hight of plant 3 to 4 feet, ) Rate - Rs. 205 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 19, 2(b)Foliage Shrub item No 2)

Thuja (Bag Size 13"x13", hight of plant 45 cm to 60cm) Rate - Rs. 206 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 20, 2(b)Foliage Shrub item No 21)

HT (hybrid tea) diff. var. (Bag Size 10" x 12", hight of plant 30 to 45 Cm) Rate - Rs. 138 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 37, 13 (b) Roses item No 1)

Hibiscus Well Developed, Healthy Foliage / Half Bloom Stage , Free from Pest and Diseases. (Bag Size 8"x10", hight of plant 20 cm to 45, cm) Rate - Rs. 68 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 27 , 7(b) Hedges item No 7)

Croton (Bag Size 13"x13", hight of plant 30 Cm to 60 Cm ) Rate - Rs. 165 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 20, 2 (b) Foliage Shrubs item No 6)

Ficus Benjamin (Bag Size 13"x13", hight of plant 60 Cm to 90 Cm ) Rate - Rs. 140 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 20, 2 (b) Foliage Shrubs item No 6)

Pisonia alba (Bag Size 10"x10", hight of plant 30 Cm to 45 Cm ) Rate - Rs. 206 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 20, 2 (b) Foliage Shrubs item No 22)

Jatropha (Bag Size 8"x10", hight of plant 45 Cm to 60Cm ) Rate - Rs. 48 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 17, 1 (b)Flowering Shrubs item No 12)

Gardenia/Anant (Bag Size 8"x10", hight of plant 45 Cm to 60Cm ) Rate - Rs. 48 Add -Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 17, 1 (b)Flowering Shrubs item No 5)

Plumeria Alba (Bag Size 18"x18", hight of plant 240 Cm to 270Cm ) Rate - Rs. 1233 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 18, 1 (b)Flowering Shrubs item No29)

Ratrani/Night queen (Bag Size 8"x10", hight of plant 240 Cm to 270Cm ) Rate - Rs. 55 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 17, 1 (b)Flowering Shrubs item No19)

Bahva (Amaltash) Minimum Girth 5 to 7 c.m. Minimum 5 to 6 Branches with Maximum number of Leaves , with clear tunk,healthy condition Free from pest and diseases,well seteled in appropriate size of Plybag,uniform in size and root system are undamaged. (Bag Size 13"x13", hight of plant 6 feet to 8 feet ) Rate - Rs. 274 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 23, 5 (b) Flowering Trees item No 1)

Bakul Minimum Girth 5 to 7 c.m. Minimum 5 to 6 Branches with Maximum number of Leaves , with clear tunk,healthy condition Free from pest and diseases,well seteled in appropriate size of Plybag,uniform in size and root system are undamaged. (Bag Size 13"x13", hight of plant 6 feet to 8 feet ) Rate - Rs. 274 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 23, 5 (b) Flowering Trees item No 2)

Parijat Minimum Girth 5 to 7 c.m. Minimum 5 to 6 Branches with Maximum number of Leaves , with clear tunk,healthy condition Free from pest and diseases,well seteled in appropriate size of Plybag,uniform in size and root system are undamaged. (Bag Size 13"x13", hight of plant 6 feet to 8 feet ) Rate - Rs. 411 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 23, 5 (b) Flowering Trees item No 9)

Areca Palm (Bag Size 21"x21", hight of plant 9 feet and above) Rate - Rs. 2100 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 36, 11(e) Palms item No 1)

Royal Palm (Bag Size 21"x21", hight of plant 9 feet and above) Rate - Rs. 2100 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 36, 11(e) Palms item No 2)

Fox tail palm (Bag Size 21"x21", hight of plant 9 feet and above) Rate - Rs. 2100 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 36, 11(e) Palms item No 3)

Heliconia any type Well Developed ,Fresh, Healthy bright Colour Leaves ,free from pest and diseases (Bag Size 18"x 18", hight of plant 60 cm to 75 cm above) Rate - Rs. 70 Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 18, 2 (a) Foliage Shrubs

Hamelia patens Well Developed ,Fresh, Healthy bright Colour Leaves ,free from pest and diseases (Bag Size 8"x 10", hight of plant 45 cm to 60 cm above) Rate - Rs. 40 / Nos Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 17, 1 (b)Flowering Shrubs item No 5)

Spathiphyllum Well Developed ,Fresh, Healthy bright Colour Leaves ,free from pest and diseases (Bag Size 8"x 10", hight of plant 15 cm to 30 cm above) Rate - Rs. 69 / Nos Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 18, 1 (b)Flowering Shrubs item No 32)

Rhoea Well Developed, Healthy , Free from Pest an Disease (Bag Size 5"x 6", hight of plant 10 cm to 20 cm above) Rate - Rs. 20 / Nos Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 29, 8 Ground Covers Shrubs item No 15)

Pilea Well Developed, Healthy , Free from Pest an Disease (Bag Size 5"x 6", hight of plant 10 cm to 20 cm above) Rate - Rs. 12 / Nos Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 28, 8 Ground Covers Shrubs item No 8)

Money Plant Golden Plant should be well Developed, Healthy conition, Plant should be Pest and disese Free. (Pot size 10" mosstick pots, hight of plant 60cm to 90 cm above) Rate - Rs. 615 / Nos Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 34,1(b)Indoor Plants Shrubs item No 7)

Dracaena red ruby Plant should be well Developed, Healthy conition, Plant should be Pest and disese Free. (Pot size 8" pot, hight of plant 60cm to 90 cm above) Rate - Rs. 275/ Nos Add-Increased in percent for Corporation Areas @ 5% (As per Parks and garden, PWD Government of maharasthra DSR 2022-23,Page No 34, 1(b)Indoor Plants Shrubs item No 6)

SINGLE SWING WITH BELT ASSEMBLY (Proving and Fixing) Rec. Age :- 4-14 yrs. The area :- 3.0 m x 2.5 m Safe play area :- 4 m x 3.5 m In the swing the leg support is made up of 40 NB GI pipes and toppipe is of 50 NB GI pipes with GI junction box with powder coating.The swing seat is made up of 10 mm thick rubber belt. The belt seat is affixed on 6 mm rubber coated GI chain. The ball bearings are mounted inside a specially designed nylon clamp. All pipes are ‘B’ class pipes All Structures are to be Powder Coated. All Work Done As Per General Raw Material Sheet Added Below. Work done should be as per engineer incharge.

SINGLE FRP ROLLER SLIDE 1.5 MT (Proving and Fixing) Age Group :- 4 – 12 yrs. Product Area :- 5.8 m x 1.0 m Safe Play Area :- 6.8 m x 2.0 m The roller slide is made up of FRP. The slide chute consists of molded plastic rollers spread over the length. The rollers are made up of HDPE with UV stabilized pigment. The square platform of the slide is made up of the Fiberglass reinforced plastic. The vertical platform support pipes used are of 80 NB powder coated GI pipes. The railing is made in rotational molding. The slide entry is affixed on 80 NB and 80 x 20 NB nylon clamp. The ladder frame is made in 20 NB and 25 NB powder coated GI pipes. The triangular steps are made in 16 SWG GI sheets. All pipes are ‘B’ class pipes All Structures are to be Powder Coated. All Work Done As Per General Raw Material Sheet Added Below. Work done should be as per engineer incharge

MULTI SEATER SEE-SAW (Proving and Fixing) Per No Age Group :- 3- 10 yrs. Product Area :- 3.0 m x 0.5 m Safe Play Area :- 4.0 m x 1.5 m Material Specification : The Multi Seater See saw comprises four roto seats. The lever consists of 20 NB and 80 NB powder coated GI pipes. The bearing used in this item is heavy duty nylon bush type. The stand for see saw is made using 50 NB GI pipe. All pipes are ‘B’ class pipes The Foundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x0.45m and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated of minimum 60 micron thickness. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment etc all. Work done should be as per engineer incharge\40km. are considered.

MULTI ACTIVITY PLAY SYSTEM : MAPS 6 (PROVIDING & FIXING)

Supply and installation of Accessories with specifications mentioned below and as per direction of Engineer-in-charge. LG 32inch Commercial Display MR LG 32 Commercial Display: 16:9, Original, 4:3, Vertical Zoom, All-Direction Zoom, Audio output 3W +3W, 6 modes (Standard, Cinema, Clear voice, Cricket, Bollywood, Game), Self Diagnostics (USB), Multi IR Code, IR Out, HTNG/HDMI-CEC, WXHXD/Weight - 734X474X172/4.7kg

Supply and installation of Computer Intel Core i5 with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Gigabyte Brix RAM 8GB DDR4 Storage 240GB SSD Display Adapter Intel® Graphics Nework Adapter Gigabit Ethernet LAN 10/100/1000 MR

Supply and installation of Speakers with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model QSC AC-S6T Acoustic Coverage™ Description 6.5-inch 2-way, 130° conical Surface Mount speakers Components LF : 165 mm (6.5-inch) Polypropylene woofer with 25 mm (1-inch) voice coil HF: 25 mm (1-inch) Aluminium dome tweeter with 25 mm (1-inch) voice coil Frequency Response 60 Hz–20 kHz Rated Noise Power / Voltage 30 watts / 15.5 volts rms Max O/P 101 dB SPL LTC / 107 dB SPL Peak Impedance 8Ω Broad-band Sensitivity 86 dB SPL Coverage Angle 130° conical (500 Hz–5 kHz) Directivity Factor, Rθ (Q) 6 Directivity Index, Di 8 dB MR

Supply and installation of Amplifier with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Crown XLS 1502 Description Two-channel, 525W @ 4Ω Class D Power Amplifier Sensitivity 1.4Vrms Frequency Response +0dB, -1dB Signal to Noise >103dB (at .775Vrms, 6dB lower) Inter modulation Distortion < 0.3% Damping Factor > 200 THD < 0.5% Crosstalk At 1kHz: > 85dB, At 20kHz: > 55dB MR

Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge: Windows 10 Professional (OEM License) MR

Cables / Connectors for the zone MR | refers to the various wire/connectors needed for the optimum functioning of the hardware with specifications needed and as per direction of Engineer-in-charge.

Technical Architecture Design MR It refers to the high level structures of a software system and the discipline of creating such structures and systems. Each structure comprises software elements, relations among them, and properties of both elements and relations. It functions as a blueprint for the system and the developing project, laying out the tasks necessary to be executed by the design teams.It is about making fundamental structural choices which are costly to change once implemented. Software architecture choices include specific structural options from possibilities in the design of software. For example, the systems that controlled the space shuttle launch vehicle had the requirement of being very fast and very reliable. Therefore, an appropriate real-time computing language would need to be chosen. Additionally, to satisfy the need for reliability the choice could be made to have multiple redundant and independently produced copies of the program, and to run these copies on independent hardware while cross-checking results.

Software Programming : It is the process of designing and building an executable computer program for accomplishing a specific computing task. Programming involves tasks such as: analysis, generating algorithms, profiling algorithms' accuracy and resource consumption, and the implementation of algorithms in a chosen programming language (commonly referred to as coding). The source code of a program is written in one or more languages that are intelligible to programmers, rather than machine code, which is directly executed by the central processing unit. The purpose of programming is to find a sequence of instructions that will automate the performance of a task (which can be as complex as an operating system) on a computer, often for solving a given problem. The process of programming thus often requires expertise in several different subjects, including knowledge of the application domain, specialized algorithms, and formal logic. It interfaces all the pages of the book in a interactive way, pages are combinations of static images and videos. MR

Asset Integration MR |asset integration refers to the compiling/placing/integration/optimsation of the various elements (graphics/cgi) needed to from the front end of the desired application/installation

Testing / Compilation : It is an investigation conducted to provide stakeholders with information about the quality of the software product or service under test.Software testing can also provide an objective, independent view of the software to allow the business to appreciate and understand the risks of software implementation. Test techniques include the process of executing a program or application with the intent of finding software bugs (errors or other defects), and verifying that the software product is fit for use. MR

3D Animation , VFX, Sound MR.Refers to the computer generated imagery needed for the visuals of the specific installation.The further included various post production process /sound engineering/editing/animation and the final output .

Integration / Installation MR This includes the setting up of the physical installation including mointing of the projectors /screens/and loading and executuin of the required software/licenses

Supply and installation of Accessories with specifications mentioned below and as per direction of Engineer-in-charge. 24inch Dell Touch Screen MR Brand and Model Dell E2418HN Display Type In-Plane Switching Panel Screen Size 60.47 cm (23.8") Resolution 1920 x 1080 at 60Hz (16:9) Brightness 250 cd/m² Pixel Pitch 0.275 mm x 0.275 mm Pixel Density 93 PPI Viewing Angle 178° vertical / 178° horizontal Colour Depth 16.7 Million colors Input Connections 1 x HDMI v1.4 + 1 x VGA

Supply and installation of Computer Intel Core i3 with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Gigabyte Brix RAM 4GB DDR4 Storage 128GB SSD Display Adapter Intel® Graphics Nework Adapter Gigabit Ethernet LAN 10/100/1000 MR

Supply and installation of Speakers with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model QSC AC-S6T Acoustic Coverage™ Description 6.5-inch 2-way, 130° conical Surface Mount speakers Components LF : 165 mm (6.5-inch) Polypropylene woofer with 25 mm (1-inch) voice coil HF: 25 mm (1-inch) Aluminium dome tweeter with 25 mm (1-inch) voice coil Frequency Response 60 Hz–20 kHz Rated Noise Power / Voltage 30 watts / 15.5 volts rms Max O/P 101 dB SPL LTC / 107 dB SPL Peak Impedance 8Ω Broad-band Sensitivity 86 dB SPL Coverage Angle 130° conical (500 Hz–5 kHz) Directivity Factor, Rθ (Q) 6 Directivity Index, Di 8 dB MR

Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge: Windows 10 Professional (OEM License) MR

Cables / Connectors for the zone MR efers to the various wire/connectors needed for the optimum functioning of the hardware with specifications needed and as per direction of Engineer-in-charge.

Technical Architecture Design :It refers to the high level structures of a software system and the discipline of creating such structures and systems. Each structure comprises software elements, relations among them, and properties of both elements and relations. It functions as a blueprint for the system and the developing project, laying out the tasks necessary to be executed by the design teams.It is about making fundamental structural choices which are costly to change once implemented. Software architecture choices include specific structural options from possibilities in the design of software. For example, the systems that controlled the space shuttle launch vehicle had the requirement of being very fast and very reliable. Therefore, an appropriate real-time computing language would need to be chosen. Additionally, to satisfy the need for reliability the choice could be made to have multiple redundant and independently produced copies of the program, and to run these copies on independent hardware while cross-checking results. MR

Game Development MR Refers to the development of the computer software in accordance to the game development desgin of the particular installation

Testing / Compilation : It is an investigation conducted to provide stakeholders with information about the quality of the software product or service under test.Software testing can also provide an objective, independent view of the software to allow the business to appreciate and understand the risks of software implementation. Test techniques include the process of executing a program or application with the intent of finding software bugs (errors or other defects), and verifying that the software product is fit for use. MR

3D Animation , VFX, Sound MR Refers to the computer generated imagery needed for the visuals of the specific installation.The further included various post production process /sound engineering/editing/animation and the final output .

Integration / Installation MR This includes the setting up of the physical installation including mointing of the projectors /screens/and loading and executuin of the required software/licenses

Supply and installation of Accessories with specifications mentioned below and as per direction of Engineer-in-charge. 55inch Samsung Capacitive Touchscreen MR 55" Capacitive Touchscreen Viewsonic IFP5550

Supply and installation of Computer Intel Core i5 with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Gigabyte Brix RAM 8GB DDR4 Storage 240GB SSD Display Adapter Intel® Graphics Nework Adapter Gigabit Ethernet LAN 10/100/1000 MR

Supply and installation of Laser Projector with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Epson EB-L610U Light Source Laser Projection System 3LCD Technology, RGB liquid crystal shutter LCD Panel 0.67” (D10) Color Light Output 6,000 lumens White Light Output 6,000 lumens LCD Image Resolution WUXGA, 1920 x 1200, 16:10 Colour Reproduction 30 bits, 1.07B Color (10+10+10) Throw Ratio 1.35 - 2.2:1 Lensing Standard Optical f1.5-1.7 / 20mm - 31.8mm Zoom Manual, Factor: 1 - 1.6 MR

Supply and installation of Speakers with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model QSC AC-S6T Acoustic Coverage™ Description 6.5-inch 2-way, 130° conical Surface Mount speakers Components LF : 165 mm (6.5-inch) Polypropylene woofer with 25 mm (1-inch) voice coil HF: 25 mm (1-inch) Aluminium dome tweeter with 25 mm (1-inch) voice coil Frequency Response 60 Hz–20 kHz Rated Noise Power / Voltage 30 watts / 15.5 volts rms Max O/P 101 dB SPL LTC / 107 dB SPL Peak Impedance 8Ω Broad-band Sensitivity 86 dB SPL Coverage Angle 130° conical (500 Hz–5 kHz) Directivity Factor, Rθ (Q) 6 Directivity Index, Di 8 dB MR

Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge: Windows 10 Professional (OEM License) MR

Cables / Connectors for the zone MR efers to the various wire/connectors needed for the optimum functioning of the hardware with specifications needed and as per direction of Engineer-in-charge

Technical Architecture Design :It refers to the high level structures of a software system and the discipline of creating such structures and systems. Each structure comprises software elements, relations among them, and properties of both elements and relations. It functions as a blueprint for the system and the developing project, laying out the tasks necessary to be executed by the design teams.It is about making fundamental structural choices which are costly to change once implemented. Software architecture choices include specific structural options from possibilities in the design of software. For example, the systems that controlled the space shuttle launch vehicle had the requirement of being very fast and very reliable. Therefore, an appropriate real-time computing language would need to be chosen. Additionally, to satisfy the need for reliability the choice could be made to have multiple redundant and independently produced copies of the program, and to run these copies on independent hardware while cross-checking results. MR

Cave Painting Game Development MR Refers to the development of the computer software in accordance to the game development desgin of the particular installation

Testing / Compilation : It is an investigation conducted to provide stakeholders with information about the quality of the software product or service under test.Software testing can also provide an objective, independent view of the software to allow the business to appreciate and understand the risks of software implementation. Test techniques include the process of executing a program or application with the intent of finding software bugs (errors or other defects), and verifying that the software product is fit for use. MR

3D Animation , VFX, Sound MR Refers to the computer generated imagery needed for the visuals of the specific installation.The further included various post production process /sound engineering/editing/animation and the final output .

Integration / Installation MR This includes the setting up of the physical installation including mointing of the projectors /screens/and loading and executuin of the required software/licenses

Supply and installation of Accessories with specifications mentioned below and as per direction of Engineer-in-charge. 7000 Lumen Epson Projector MR EPSON 7905 Projection System High-aperture Epson 3-chip, 3LCD technology LCD Panel 0.79" Poly-silicon TFT Active Matrix Color Light Output 7,000 lumens White Light Output 7,000 lumens LCD Image Resolution WUXGA, 1920 x 1200, 16:10 Colour Reproduction 30 bits, 1.07B Color (10+10+10) Throw Ratio 1.44 – 2.32 Lensing Standard Optical : f1.7-2.3 | 24.0mm - 38.2mm Zoom Zoom 1 - 1.6

Supply and installation of Processor Intel Core i7 8700 (8th Generation) with specifications mentioned below and as per direction of Engineer-in-charge: Mainboard Gigabyte B310M Motherboard RAM 16 GB Kingston DDR4 HyperX RAM Storage 256 GB SSD Display Adapter Nvidia GTX 1660 6GB VRAM Network Adapter Gigabit Ethernet LAN 10/100/1000 HID Dell USB Keyboard + Mouse Combo MR

Supply and installation of Camera with specifications mentioned below and as per direction of Engineer-in-charge. Camera Logitech Briostream Ultra HD 4K Streaming Edition, 1080p/60fps Hyper-Fast Streaming MR

Supply and installation of Speakers with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model QSC AC-S6T Acoustic Coverage™ Description 6.5-inch 2-way, 130° conical Surface Mount speakers Components LF : 165 mm (6.5-inch) Polypropylene woofer with 25 mm (1-inch) voice coil HF: 25 mm (1-inch) Aluminium dome tweeter with 25 mm (1-inch) voice coil Frequency Response 60 Hz–20 kHz Rated Noise Power / Voltage 30 watts / 15.5 volts rms Max O/P 101 dB SPL LTC / 107 dB SPL Peak Impedance 8Ω Broad-band Sensitivity 86 dB SPL Coverage Angle 130° conical (500 Hz–5 kHz) Directivity Factor, Rθ (Q) 6 Directivity Index, Di 8 dB MR

Supply and installation of Amplifier with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Crown XLS 1502 Description Two-channel, 525W @ 4Ω Class D Power Amplifier Sensitivity 1.4Vrms Frequency Response +0dB, -1dB Signal to Noise >103dB (at .775Vrms, 6dB lower) Inter modulation Distortion < 0.3% Damping Factor > 200 THD < 0.5% Crosstalk At 1kHz: > 85dB, At 20kHz: > 55dB MR

Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge: Windows 10 Professional (OEM License) MR

Projector Mount MR Supply and installation of Projector Mount with specifications mentioned below and as per direction of Engineer-in-charge:

Cables / Connectors for the zone MR efers to the various wire/connectors needed for the optimum functioning of the hardware with specifications needed and as per direction of Engineer-in-charge.

Technical Architecture Design :It refers to the high level structures of a software system and the discipline of creating such structures and systems. Each structure comprises software elements, relations among them, and properties of both elements and relations. It functions as a blueprint for the system and the developing project, laying out the tasks necessary to be executed by the design teams.It is about making fundamental structural choices which are costly to change once implemented. Software architecture choices include specific structural options from possibilities in the design of software. For example, the systems that controlled the space shuttle launch vehicle had the requirement of being very fast and very reliable. Therefore, an appropriate real-time computing language would need to be chosen. Additionally, to satisfy the need for reliability the choice could be made to have multiple redundant and independently produced copies of the program, and to run these copies on independent hardware while cross-checking results. MR

Software Programming : It is the process of designing and building an executable computer program for accomplishing a specific computing task. Programming involves tasks such as: analysis, generating algorithms, profiling algorithms' accuracy and resource consumption, and the implementation of algorithms in a chosen programming language (commonly referred to as coding). The source code of a program is written in one or more languages that are intelligible to programmers, rather than machine code, which is directly executed by the central processing unit. The purpose of programming is to find a sequence of instructions that will automate the performance of a task (which can be as complex as an operating system) on a computer, often for solving a given problem. The process of programming thus often requires expertise in several different subjects, including knowledge of the application domain, specialized algorithms, and formal logic. It interfaces all the pages of the book in a interactive way, pages are combinations of static images and videos. MR

Asset Integration MR asset integration refers to the compiling/placing/integration/optimsation of the various elements (graphics/cgi) needed to from the front end of the desired application/installation

Testing / Compilation : It is an investigation conducted to provide stakeholders with information about the quality of the software product or service under test.Software testing can also provide an objective, independent view of the software to allow the business to appreciate and understand the risks of software implementation. Test techniques include the process of executing a program or application with the intent of finding software bugs (errors or other defects), and verifying that the software product is fit for use. MR

3D Animation , VFX, Sound MR Refers to the computer generated imagery needed for the visuals of the specific installation.The further included various post production process /sound engineering/editing/animation and the final output .

Integration / Installation MR This includes the setting up of the physical installation including mointing of the projectors /screens/and loading and executuin of the required software/licenses

"Supply and installation of Laser Projector with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Viewsonic LS830 Light Source 390W DLP Laser Color Light Output 4,500 lumens White Light Output 4,500 lumens LCD Image Resolution 1080p, 1920 x 1080, 16:10 Colour Reproduction 30 bits, 1.07B Color (10+10+10) Throw Ratio 0.23 Ultra Short Throw Lensing Digital optical focus" MR

Projector Mount Spider Clamp MR Supply and installation of Projector Mount with specifications mentioned below and as per direction of Engineer-in-charge:

Supply and installation of Processor Intel Core i7 8700 (8th Generation) with specifications mentioned below and as per direction of Engineer-in-charge: Mainboard Gigabyte B310M Motherboard RAM 16 GB Kingston DDR4 HyperX RAM Storage 256 GB SSD Display Adapter Nvidia GTX 1660 6GB VRAM Network Adapter Gigabit Ethernet LAN 10/100/1000 HID Dell USB Keyboard + Mouse ComboMR

Supply and installation of Computer Intel Core i5 with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Gigabyte Brix RAM 8GB DDR4 Storage 240GB SSD Display Adapter Intel® Graphics Nework Adapter Gigabit Ethernet LAN 10/100/1000 MR

Supply and installation of Accessories with specifications mentioned below and as per direction of Engineer-in-charge. 43 inch Samsung Touch screen MR Brand and Model Samsung PM43F-BC Display Type 60Hz E-LED BLU Screen Size 43" Resolution 1920x1080 (Full HD) Active Display Area 1209.6mm (H) x 680.4mm (V) Brightness 350 nit Pixel Pitch 0.49(H) x 0.49(V) Contrast Ratio 3000:1 Viewing Angle 178:178 Colour Depth 10bit Dithering - 1.07Billion | Gamut 72%

Wifi Router MR Supply and installation of router with specifications mentioned below and as per direction of Engineer-in-charge. Router:Dlink MR Dlink Switch 24 Port: MR Brand and Model Dlink DGS-1210-28 Description 24 Port Web Smart Switch Ports 24 10/100/1000Base-T ports + 4 SFP ports

Supply and installation of Speakers with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model QSC AC-S6T Acoustic Coverage™ Description 6.5-inch 2-way, 130° conical Surface Mount speakers Components LF : 165 mm (6.5-inch) Polypropylene woofer with 25 mm (1-inch) voice coil HF: 25 mm (1-inch) Aluminium dome tweeter with 25 mm (1-inch) voice coil Frequency Response 60 Hz–20 kHz Rated Noise Power / Voltage 30 watts / 15.5 volts rms Max O/P 101 dB SPL LTC / 107 dB SPL Peak Impedance 8Ω Broad-band Sensitivity 86 dB SPL Coverage Angle 130° conical (500 Hz–5 kHz) Directivity Factor, Rθ (Q) 6 Directivity Index, Di 8 dB MR

Supply and installation of Amplifier with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Crown XLS 1502 Description Two-channel, 525W @ 4Ω Class D Power Amplifier Sensitivity 1.4Vrms Frequency Response +0dB, -1dB Signal to Noise >103dB (at .775Vrms, 6dB lower) Inter modulation Distortion < 0.3% Damping Factor > 200 THD < 0.5% Crosstalk At 1kHz: > 85dB, At 20kHz: > 55dB MR

Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge: Windows 10 Professional (OEM License) MR

Item No.174Cables / Connectors for the zone MR efers to the various wire/connectors needed for the optimum functioning of the hardware with specifications needed and as per direction of Engineer-in-charge.

Technical Architecture Design :It refers to the high level structures of a software system and the discipline of creating such structures and systems. Each structure comprises software elements, relations among them, and properties of both elements and relations. It functions as a blueprint for the system and the developing project, laying out the tasks necessary to be executed by the design teams.It is about making fundamental structural choices which are costly to change once implemented. Software architecture choices include specific structural options from possibilities in the design of software. For example, the systems that controlled the space shuttle launch vehicle had the requirement of being very fast and very reliable. Therefore, an appropriate real-time computing language would need to be chosen. Additionally, to satisfy the need for reliability the choice could be made to have multiple redundant and independently produced copies of the program, and to run these copies on independent hardware while cross-checking results. MR

Software Programming : It is the process of designing and building an executable computer program for accomplishing a specific computing task. Programming involves tasks such as: analysis, generating algorithms, profiling algorithms' accuracy and resource consumption, and the implementation of algorithms in a chosen programming language (commonly referred to as coding). The source code of a program is written in one or more languages that are intelligible to programmers, rather than machine code, which is directly executed by the central processing unit. The purpose of programming is to find a sequence of instructions that will automate the performance of a task (which can be as complex as an operating system) on a computer, often for solving a given problem. The process of programming thus often requires expertise in several different subjects, including knowledge of the application domain, specialized algorithms, and formal logic. It interfaces all the pages of the book in a interactive way, pages are combinations of static images and videos. MR

Asset Integration MR asset integration refers to the compiling/placing/integration/optimsation of the various elements (graphics/cgi) needed to from the front end of the desired application/installation

Testing / Compilation : It is an investigation conducted to provide stakeholders with information about the quality of the software product or service under test.Software testing can also provide an objective, independent view of the software to allow the business to appreciate and understand the risks of software implementation. Test techniques include the process of executing a program or application with the intent of finding software bugs (errors or other defects), and verifying that the software product is fit for use. MR

3D Animation , VFX, Sound MR Refers to the computer generated imagery needed for the visuals of the specific installation.The further included various post production process /sound engineering/editing/animation and the final output .

Integration / Installation MR This includes the setting up of the physical installation including mointing of the projectors /screens/and loading and executuin of the required software/licenses

Supply and installation of Accessories with specifications mentioned below and as per direction of Engineer-in-charge. Viewsonic UST Projector MR

Motion Sensor MR Refers to the device that detect motion/movement and accordingly programd to trigger specific actios achieved via computer programing.

Supply and installation of Processor Intel Core i7 8700 (8th Generation) with specifications mentioned below and as per direction of Engineer-in-charge: Mainboard Gigabyte B310M Motherboard RAM 16 GB Kingston DDR4 HyperX RAM Storage 256 GB SSD Display Adapter Nvidia GTX 1660 6GB VRAM Network Adapter Gigabit Ethernet LAN 10/100/1000 HID Dell USB Keyboard + Mouse Combo MR

Supply and installation of Speakers with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model QSC AC-S6T Acoustic Coverage™ Description 6.5-inch 2-way, 130° conical Surface Mount speakers Components LF : 165 mm (6.5-inch) Polypropylene woofer with 25 mm (1-inch) voice coil HF: 25 mm (1-inch) Aluminium dome tweeter with 25 mm (1-inch) voice coil Frequency Response 60 Hz–20 kHz Rated Noise Power / Voltage 30 watts / 15.5 volts rms Max O/P 101 dB SPL LTC / 107 dB SPL Peak Impedance 8Ω Broad-band Sensitivity 86 dB SPL Coverage Angle 130° conical (500 Hz–5 kHz) Directivity Factor, Rθ (Q) 6 Directivity Index, Di 8 dB MR

Supply and installation of Amplifier with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Crown XLS 1502 Description Two-channel, 525W @ 4Ω Class D Power Amplifier Sensitivity 1.4Vrms Frequency Response +0dB, -1dB Signal to Noise >103dB (at .775Vrms, 6dB lower) Inter modulation Distortion < 0.3% Damping Factor > 200 THD < 0.5% Crosstalk At 1kHz: > 85dB, At 20kHz: > 55dB MR

Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge: Windows 10 Professional (OEM License) MR

Cables / Connectors for the zone MR refers to the various wire/connectors needed for the optimum functioning of the hardware with specifications needed and as per direction of Engineer-in-charge.

Technical Architecture Design :It refers to the high level structures of a software system and the discipline of creating such structures and systems. Each structure comprises software elements, relations among them, and properties of both elements and relations. It functions as a blueprint for the system and the developing project, laying out the tasks necessary to be executed by the design teams.It is about making fundamental structural choices which are costly to change once implemented. Software architecture choices include specific structural options from possibilities in the design of software. For example, the systems that controlled the space shuttle launch vehicle had the requirement of being very fast and very reliable. Therefore, an appropriate real-time computing language would need to be chosen. Additionally, to satisfy the need for reliability the choice could be made to have multiple redundant and independently produced copies of the program, and to run these copies on independent hardware while cross-checking results. MR

Software Programming : It is the process of designing and building an executable computer program for accomplishing a specific computing task. Programming involves tasks such as: analysis, generating algorithms, profiling algorithms' accuracy and resource consumption, and the implementation of algorithms in a chosen programming language (commonly referred to as coding). The source code of a program is written in one or more languages that are intelligible to programmers, rather than machine code, which is directly executed by the central processing unit. The purpose of programming is to find a sequence of instructions that will automate the performance of a task (which can be as complex as an operating system) on a computer, often for solving a given problem. The process of programming thus often requires expertise in several different subjects, including knowledge of the application domain, specialized algorithms, and formal logic. It interfaces all the pages of the book in a interactive way, pages are combinations of static images and videos. MR

Asset Integration MR asset integration refers to the compiling/placing/integration/optimsation of the various elements (graphics/cgi) needed to from the front end of the desired application/installation

Testing / Compilation : It is an investigation conducted to provide stakeholders with information about the quality of the software product or service under test.Software testing can also provide an objective, independent view of the software to allow the business to appreciate and understand the risks of software implementation. Test techniques include the process of executing a program or application with the intent of finding software bugs (errors or other defects), and verifying that the software product is fit for use. MR

Modelling + texturing + Rigging + Photorealistic lighting + compositing + Animation of 5 Unique Birds MR

Integration / Installation MR This includes the setting up of the physical installation including mointing of the projectors /screens/and loading and executuin of the required software/licenses

Customised Hardware MR This refers to the various custom hardware modules developed specifically fo the required installation

Supply and installation of Computer Intel Core i3 with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Gigabyte Brix RAM 4GB DDR4 Storage 128GB SSD Display Adapter Intel® Graphics Nework Adapter Gigabit Ethernet LAN 10/100/1000 5.1 SoundCard MR

Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge: Windows 10 Professional (OEM License) MR

Cables / Connectors for the zone MR refers to the various wire/connectors needed for the optimum functioning of the hardware with specifications needed and as per direction of Engineer-in-charge.

Technical Architecture Design :It refers to the high level structures of a software system and the discipline of creating such structures and systems. Each structure comprises software elements, relations among them, and properties of both elements and relations. It functions as a blueprint for the system and the developing project, laying out the tasks necessary to be executed by the design teams.It is about making fundamental structural choices which are costly to change once implemented. Software architecture choices include specific structural options from possibilities in the design of software. For example, the systems that controlled the space shuttle launch vehicle had the requirement of being very fast and very reliable. Therefore, an appropriate real-time computing language would need to be chosen. Additionally, to satisfy the need for reliability the choice could be made to have multiple redundant and independently produced copies of the program, and to run these copies on independent hardware while cross-checking results. MR

Software Programming : It is the process of designing and building an executable computer program for accomplishing a specific computing task. Programming involves tasks such as: analysis, generating algorithms, profiling algorithms' accuracy and resource consumption, and the implementation of algorithms in a chosen programming language (commonly referred to as coding). The source code of a program is written in one or more languages that are intelligible to programmers, rather than machine code, which is directly executed by the central processing unit. The purpose of programming is to find a sequence of instructions that will automate the performance of a task (which can be as complex as an operating system) on a computer, often for solving a given problem. The process of programming thus often requires expertise in several different subjects, including knowledge of the application domain, specialized algorithms, and formal logic. It interfaces all the pages of the book in a interactive way, pages are combinations of static images and videos. MR

Asset Integration MR asset integration refers to the compiling/placing/integration/optimsation of the various elements (graphics/cgi) needed to from the front end of the desired application/installation

Testing / Compilation : It is an investigation conducted to provide stakeholders with information about the quality of the software product or service under test. Software testing can also provide an objective, independent view of the software to allow the business to appreciate and understand the risks of software implementation. Test techniques include the process of executing a program or application with the intent of finding software bugs (errors or other defects), and verifying that the software product is fit for use. MR

Content/sound MR Refers to creation of the various content and sound edit required for the particular installation

Integration / Installation MR This includes the setting up of the physical installation including mointing of the projectors /screens/and loading and executuin of the required software/licenses

65inch Commercial Display MR Refers to Supply and installation of the display as per direction of Engineer-in-charge: 65 Inch Commercial Display: Screen size 165.1cm (65), Backlight type-Trident, Resolution 3840X2160 (4kUHD), Brightness 350 (cd/m2), Aspect Ratio-5 modes (16:9, Original, 4:3, Vertical Zoom, All-Direction Zoom, Audio Out 10X10, Audio-6 modes Standard, Cinema, Clear Voice III, Sports, Music, Game, Dimensions W x H x D / Weight with stand 1468X917X269/21.4kg, Volt Hz 100 ~ 240 V, 50/60 Hz

TV Mount MR Refers to Supply and installation of the equipment/support to hold the display device as per direction of Engineer-in-charge:

Supply and installation of Processor Intel Core i7 8700 (8th Generation) with specifications mentioned below and as per direction of Engineer-in-charge: Mainboard Gigabyte B310M Motherboard RAM 16 GB Kingston DDR4 HyperX RAM Storage 256 GB SSD Display Adapter Radeon WX 9100 Network Adapter Gigabit Ethernet LAN 10/100/1000 HID Dell USB Keyboard + Mouse Combo MR

Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge: Windows 10 Professional (OEM License) MR

Cables / Connectors for the zone MR refers to the various wire/connectors needed for the optimum functioning of the hardware with specifications needed and as per direction of Engineer-in-charge.

Technical Architecture Design :It refers to the high level structures of a software system and the discipline of creating such structures and systems. Each structure comprises software elements, relations among them, and properties of both elements and relations. It functions as a blueprint for the system and the developing project, laying out the tasks necessary to be executed by the design teams.It is about making fundamental structural choices which are costly to change once implemented. Software architecture choices include specific structural options from possibilities in the design of software. For example, the systems that controlled the space shuttle launch vehicle had the requirement of being very fast and very reliable. Therefore, an appropriate real-time computing language would need to be chosen. Additionally, to satisfy the need for reliability the choice could be made to have multiple redundant and independently produced copies of the program, and to run these copies on independent hardware while cross-checking results. MR

Software Programming : It is the process of designing and building an executable computer program for accomplishing a specific computing task. Programming involves tasks such as: analysis, generating algorithms, profiling algorithms' accuracy and resource consumption, and the implementation of algorithms in a chosen programming language (commonly referred to as coding). The source code of a program is written in one or more languages that are intelligible to programmers, rather than machine code, which is directly executed by the central processing unit. The purpose of programming is to find a sequence of instructions that will automate the performance of a task (which can be as complex as an operating system) on a computer, often for solving a given problem. The process of programming thus often requires expertise in several different subjects, including knowledge of the application domain, specialized algorithms, and formal logic. It interfaces all the pages of the book in a interactive way, pages are combinations of static images and videos. MR

Asset Integration MR asset integration refers to the compiling/placing/integration/optimsation of the various elements (graphics/cgi) needed to from the front end of the desired application/installation

Testing / Compilation : It is an investigation conducted to provide stakeholders with information about the quality of the software product or service under test. Software testing can also provide an objective, independent view of the software to allow the business to appreciate and understand the risks of software implementation. Test techniques include the process of executing a program or application with the intent of finding software bugs (errors or other defects), and verifying that the software product is fit for use. MR

Content - Animation / vfx MR Refers to the development of the content in Cgi in accordance to the approved script .This includes animation ,vfx and redering

Integration / Installation MR This includes the setting up of the physical installation including mointing of the projectors /screens/and loading and executuin of the required software/licenses

Computer for Dome (Interactive):.i7 NUC, 256 GB SSD, 8GB RAM, 4K out MR Supply and installation of Processor Intel Core i7 8700 (8th Generation ) with specifications mentioned below and as per direction of Engineer-in-charge. Mainboard Gigabyte B310M Motherboard RAM 16 GB Kingston DDR4 HyperX RAM Storage 128 GB SSD Display Adapter Nvidia GTX 1050 4GB VRAM Network Adapter Gigabit Ethernet LAN 10/100/1000 HID Dell USB Keyboard + Mouse Combo

Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge: Windows 10 Professional (OEM License) MR

Computers for Cycles: Supply and installation of Processor Celeron NUC5CPYH,128GB SSD,4GB RAM ,as per direction of Engineer-in-charge MR

Cycles:Air Bike RESISTANCE TYPE :Manual FLYWHEEL WEIGHT: 3 kg NUMBER OF LEVELS OF RESISTANCE: 7 level MOVING COMFORT : Without wheels SPORTS PERSON'S WEIGHT Weight < 110 kg INTENSITY: LOW INTENSITY MR

Jumping pod: This refers to a customised hardware where visitors will intercting with the exhibit by Jumping on these units. As the Visitor jump it shall send data to the computer to process the interactive. MR

Dell 24inch Display MR Supply and installation of Commercial Display with specifications mentioned below and as per direction of Engineer-in-charge: Brand and Model Dell E2418HN Display Type In-Plane Switching Panel Screen Size 60.47 cm (23.8") Resolution 1920 x 1080 at 60Hz (16:9) Brightness 250 cd/m² Pixel Pitch 0.275 mm x 0.275 mm Pixel Density 93 PPI Viewing Angle 178° vertical / 178° horizontal Colour Depth 16.7 Million colors Input Connections 1 x HDMI v1.4 + 1 x VGA

LED Stripes: These refer to the customised interactive and animated Light strips that shall be laid in the installation to provide a visual feedback of the inputs from the visitor. MR

LED SMPS: These are essential in managing the power supply for the above LED stripes in Item No. 223 MR

Supply and installation of Speakers with specifications mentioned below and as per direction of Engineer-in-charge. 12" Variable Intensity Speaker System Type 12" Variable Intensity Loudspeaker Direct-radiating vented-bass fullrange loudspeaker system Components High-efficiency, high-power castframe 305-mm (12-inch) woofer with one 25.4-mm (1.0-inch) exit compression driver mounted to a small format Variably Intentsity |Multi-Angled Housing | Direct-radiating vented Frequency Response 45 Hz - 20 kHz Power Handling 250 W LTC / 1,000 W Peak Max O/P 122 dB SPL LTC / 128 dB SPL Peak Impedance 8Ω (Nominal) | 5.6Ω (Minimum) (17.5kHz) Beam - Long Throw (1-20 kHz) Horizontal : 60° (+38°, -5°) | Vertical : 70° (+35°, -15°) Beam - Short Throw (600Hz-20 kHz) Horizontal : 110° (+25°, -15°) | Vertical : 90° (+40°, -20°) Directivity Factor, Rθ (Q), 1.2-20 kHz 14.0 (+4.5, -4.0) Directivity Index, Di, 1.2-20 kHz 12.5 dB (+1.5 dB, -2.7 dB) MR

Dlink Switch 24 Port: MR Brand and Model Dlink DGS-1210-28 Description 24 Port Web Smart Switch Ports 24 10/100/1000Base-T ports + 4 SFP ports

MR Supply and installation of license of the software with specifications mentioned below and as per direction of Engineer-in-charge. Resolume Lic for mapping

Resolume Manager:Supply and installation of computer with specifications Supply and installation of Processor Intel Core i7 8700 (8th Generation ) with specifications mentioned below and as per direction of Engineer-in-charge. Mainboard Gigabyte B310M Motherboard RAM 16 GB Kingston DDR4 HyperX RAM Storage 128 GB SSD Display Adapter Nvidia GTX 1050 4GB VRAM Network Adapter Gigabit Ethernet LAN 10/100/1000 HID Dell USB Keyboard + Mouse Combo MR

Customised Hardware: MR This refers to the various custom hardware modules developed specifically fo the required installation

Cables / Connectors for the zone: MR refers to the various wire/connectors needed for the optimum functioning of the hardware with specifications needed and as per direction of Engineer-in-charge.

Reverse Equirectangular Application Development MR Development of the application in accoradance to project a 360 experience

Integration / Installation MR This includes the setting up of the physical installation including mointing of the projectors /screens/and loading and executuin of the required software/licenses

Equirectangular Video Production MR Development /shoot of the footage in accoradance to project a 360 experience

Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge: Windows 10 Professional (OEM License) MR

LG 65inch Display MR 65 Inch Commercial Display: Screen size 165.1cm (65), Backlight type-Trident, Resolution 3840X2160 (4kUHD), Brightness 350 (cd/m2), Aspect Ratio-5 modes (16:9, Original, 4:3, Vertical Zoom, All-Direction Zoom, Audio Out 10X10, Audio-6 modes Standard, Cinema, Clear Voice III, Sports, Music, Game, Dimensions W x H x D / Weight with stand 1468X917X269/21.4kg, Volt Hz 100 ~ 240 V, 50/60 Hz

Display Mount: MR Supply and installation of support/equipment for holding the display device as per direction of Engineer-in-charge

Supply and installation of Computer Intel Core i3 with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Gigabyte Brix RAM 4GB DDR4 Storage 128GB SSD Display Adapter Intel® Graphics Nework Adapter Gigabit Ethernet LAN 10/100/1000 MR

Computer for PhotoCapture:Supply and installation of processor Celeron NUC5CPYH,128GB SSD,4GB RAM ,as per direction of Engineer-in-charge MR

Camera For PhotoCapture: Supply and installation of camera with specifications mentioned below and as per direction of Engineer-in-charge. Logitech C922 MR HD 1080p/30fps or HD 720p/60fps Hyperfast Streaming, Stereo Audio, HD Light Correction, Autofocus,

Enclosure For PhotoCapture: This is customised fabrication specifically required for taking pictures of visitors, in a way that the face is properly aligned and sized for the interactive installation MR

TouchScreen Display:16" Viewsonic Display Size (in.): 16 Viewable Area (in.): 15.6 Panel Type: TN Technology Resolution: 1366 x 768 Resolution Type: WXGA Static Contrast Ratio: 500:1 (typ) Dynamic Contrast Ratio: 10M:1 Light Source: LED Colours: 262K Colour Space Support: 6 bit true Brightness: 160 cd/m² Aspect Ratio: 16:9 Response Time (Typical GTG): 12ms Viewing Angles: 90º horizontal, 60º vertical Backlight Life (Hours): 15000 Hrs (Min) Curvature: Flat Refresh Rate (Hz): 60 Blue Light Filter: Yes Colour Gamut: NTSC: 45% size (Typ) Pixel Size: 0.252 mm (H) x 0.252 mm (V) Touch Screen: Projected capacitive, 10-point multi touch Surface Treatment: Glossy, Hard Coating (7H) Cover Glass Thickness: 0.83 mm INPUT SIGNAL Frequency: Fh = 30 ~ 61KHz ; Fv = 56 ~ 75Hz

Supply and installation of router with specifications mentioned below and as per direction of Engineer-in-charge. Router:Dlink MR Dlink Switch 24 Port: MR Brand and Model Dlink DGS-1210-28 Description 24 Port Web Smart Switch Ports 24 10/100/1000Base-T ports + 4 SFP ports

Supply and installation of Speakers with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model QSC CP8 Configuration Two-way active loudspeaker LF Transducer: 8 in (203 mm), cone HF Transducer: 1.4 in (35.6 mm) compression driver Frequency Response (-6 dB) 56 - 20 kHz Frequency Range (-10 dB) 53 - 20 kHz Nominal Coverage Angle: 90° Axisymetric Maximum Rated SPL1: 124 dB AC Power Input: Universal power supply 100 – 240 VAC, 50 – 60 Hz AC Power Consumption (1/8th Power): 100 VAC, 0.75A - 240VAC 0.31A MR

Supply and installation of router with specifications mentioned below and as per direction of Engineer-in-charge. Dlink Switch 24 Port: MR Dlink Switch 24 Port: MR Brand and Model Dlink DGS-1210-28 Description 24 Port Web Smart Switch Ports 24 10/100/1000Base-T ports + 4 SFP ports

Weigh Sensor with Customised Hardware: MR This refers to the various custom hardware modules developed specifically fo the required installation

Cables / Connectors for the zone: MR refers to the various wire/connectors needed for the optimum functioning of the hardware with specifications needed and as per direction of Engineer-in-charge.

Multidisplay Application for Jump Analysis : the application will invite visitors to participate , As the visitor jumps , this application shall analyse based on the data , how much effect would it cause in various planets and will display a simulation MR

Photocapture / Alignment Application : This system shall be responsible to take the picture from the camera , process it for 3D environment and Map it on the Astraunat characters. MR

Integration / Installation MR This includes the setting up of the physical installation including mointing of the projectors /screens/and loading and executuin of the required software/licenses

Character Modelling ( Rigged + Light Baked ) MR Recreating Model Of The Personality Head in three dimension for it to be used in the process ahead. Three-dimensional (3D) models represent a physical body using a collection of points in 3D space, connected by various geometric entities such as triangles, lines, curved surfaces, etc. Being a collection of data (points and other information), 3D models can be created by hand, algorithmically (procedural modeling), or scanned

Animation MR of the various expressions, body movements, and facial movements of the Model Of The Personality animated character: Computer animation is the process used for generating animated images. The more general term computer-generated imagery (CGI) encompasses both static scenes and dynamic images, while computer animation only refers to the moving images. Computer animation is essentially a digital successor to the stop motion techniques using 3D models, and traditional animation techniques using frame-by-frame animation of 2D illustrations. Computer-generated animations are more controllable than other more physically based processes, constructing miniatures for effects shots or hiring extras for crowd scenes, and because it allows the creation of images that would not be feasible using any other technology. It can also allow a single graphic artist to produce such content without the use of actors, expensive set pieces, or props. To create the illusion of movement, an image is displayed on the computer monitor and repeatedly replaced by a new image that is similar to it, but advanced slightly in time (usually at a rate of 24, 25 or 30 frames/second).

Projector:7000 Lumen Short Throw Laser Projector "Supply and installation of Projector with specifications mentioned below and as per direction of Engineer-in-charge. EPSON 7905 Projection System High-aperture Epson 3-chip, 3LCD technology LCD Panel 0.79"" Poly-silicon TFT Active Matrix Color Light Output 7,000 lumens White Light Output 7,000 lumens LCD Image Resolution WUXGA, 1920 x 1200, 16:10 Colour Reproduction 30 bits, 1.07B Color (10+10+10) Throw Ratio 1.44 – 2.32 Lensing Standard Optical : f1.7-2.3 | 24.0mm - 38.2mm Zoom Zoom 1 - 1.6 " "Supply and installation of Short Throw Lens with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Epson Short Throw Lens ELPLX01 Zoom Ratio 0 Throw Ratio (4.3) 0.36 Throw Ratio (16:10) 0.35 " MR

Supply and installation of Processor Intel Core i7 8700 (8th Generation) with specifications mentioned below and as per direction of Engineer-in-charge: Mainboard Gigabyte B310M Motherboard RAM 16 GB Kingston DDR4 HyperX RAM Storage 256 GB SSD Display Adapter Nvidia GTX 1660 6GB VRAM Network Adapter Gigabit Ethernet LAN 10/100/1000 HID Dell USB Keyboard + Mouse Combo MR

Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge: Windows 10 Professional (OEM License) MR

Supply and installation of Speakers with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model QSC AC-S6T Acoustic Coverage™ Description 6.5-inch 2-way, 130° conical Surface Mount speakers Components LF : 165 mm (6.5-inch) Polypropylene woofer with 25 mm (1-inch) voice coil HF: 25 mm (1-inch) Aluminium dome tweeter with 25 mm (1-inch) voice coil Frequency Response 60 Hz–20 kHz Rated Noise Power / Voltage 30 watts / 15.5 volts rms Max O/P 101 dB SPL LTC / 107 dB SPL Peak Impedance 8Ω Broad-band Sensitivity 86 dB SPL Coverage Angle 130° conical (500 Hz–5 kHz) Directivity Factor, Rθ (Q) 6 Directivity Index, Di 8 dB MR

Supply and installation of Amplifier with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Crown XLS 1502 Description Two-channel, 525W @ 4Ω Class D Power Amplifier Sensitivity 1.4Vrms Frequency Response +0dB, -1dB Signal to Noise >103dB (at .775Vrms, 6dB lower) Inter modulation Distortion < 0.3% Damping Factor > 200 THD < 0.5% Crosstalk At 1kHz: > 85dB, At 20kHz: > 55dB

Cables / Connectors for the zone: MR refers to the various wire/connectors needed for the optimum functioning of the hardware with specifications needed and as per direction of Engineer-in-charge.

Equirectangular Application Development: MR Development of the software in accoradance to project a 360 experience

Integration / Installation MR This includes the setting up of the physical installation including mointing of the projectors /screens/and loading and executuin of the required software/licenses

Equirectangular Video Production MR Development /shoot of the footage in accoradance to project a 360 experience

Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge: Windows 10 Professional (OEM License) MR

65" Commercial Display: MR 65 Inch Commercial Display: Screen size 165.1cm (65), Backlight type-Trident, Resolution 3840X2160 (4kUHD), Brightness 350 (cd/m2), Aspect Ratio-5 modes (16:9, Original, 4:3, Vertical Zoom, All-Direction Zoom, Audio Out 10X10, Audio-6 modes Standard, Cinema, Clear Voice III, Sports, Music, Game, Dimensions W x H x D / Weight with stand 1468X917X269/21.4kg, Volt Hz 100 ~ 240 V, 50/60 Hz

Display Mount: MR Refers to the object/mount that will hold up the display device

Computers:i5 with GTX Card MR Supply and installation of Computer Intel Core i5 with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Gigabyte Brix RAM 8GB DDR4 Storage 240GB SSD Display Adapter Intel® Graphics Nework Adapter Gigabit Ethernet LAN 10/100/1000

43 inch Samsung Touch screen MR MR Brand and Model Samsung PM43F-BC Display Type 60Hz E-LED BLU Screen Size 43" Resolution 1920x1080 (Full HD) Active Display Area 1209.6mm (H) x 680.4mm (V) Brightness 350 nit Pixel Pitch 0.49(H) x 0.49(V) Contrast Ratio 3000:1 Viewing Angle 178:178 Colour Depth 10bit Dithering - 1.07Billion | Gamut 72%

Supply and installation of router with specifications mentioned below and as per direction of Engineer-in-charge:Router:Dlink MR Dlink Switch 24 Port: MR Brand and Model Dlink DGS-1210-28 Description 24 Port Web Smart Switch Ports 24 10/100/1000Base-T ports + 4 SFP ports

Supply and installation of Speakers with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model QSC CP8 Configuration Two-way active loudspeaker LF Transducer: 8 in (203 mm), cone HF Transducer: 1.4 in (35.6 mm) compression driver Frequency Response (-6 dB) 56 - 20 kHz Frequency Range (-10 dB) 53 - 20 kHz Nominal Coverage Angle: 90° Axisymetric Maximum Rated SPL1: 124 dB AC Power Input: Universal power supply 100 – 240 VAC, 50 – 60 Hz AC Power Consumption (1/8th Power): 100 VAC, 0.75A - 240VAC 0.31A MR

Cables / Connectors for the zone: MR refers to the various wire/connectors needed for the optimum functioning of the hardware with specifications needed and as per direction of Engineer-in-charge

Dual Display Interactive Application: This is a software that shall manage a touchscreen and a large screen at the same time, visitors shall be participating in the interactive or learning about the stars in the touchscreens and interactive output shall come in the large screen MR

Integration / Installation MR This includes the setting up of the physical installation including mointing of the projectors /screens/and loading and executuin of the required software/licenses

Assets MR Refers to the various elements required of the specific installation.The assets are created in the various required computer software

UI/UX MR Refers to the desiging of the front end visuals as well as the consumer journey for the particular installation

Oculus Go:Oculus Go Standalone Virtual Reality Headset MR MR Hardware to showcase and play 360 envoirments

Router: MR Supply and installation of router with specifications mentioned below and as per direction of Engineer-in-charge:Router:Dlink MR Dlink Switch 24 Port: MR Brand and Model Dlink DGS-1210-28 Description 24 Port Web Smart Switch Ports 24 10/100/1000Base-T ports + 4 SFP ports

TouchScreen Display:10inch Touch Display MR Supply and installation of router with specifications mentioned below and as per direction of Engineer-in-charge.Description Touch Screen Interface with Control Hardware Screen Size 10"

Computer for touchscreen:Asus stick MR Brand and Model Asus RT-AC58U Description AC1300 Dual Band WiFi Router Network Standards IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, IPv4, IPv6 Peak Data Rate up to 867 Mbps (@ 802.11ac)

Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge: Windows 10 Professional (OEM License) MR

Cables / Mounts: MR refers to the various wire/connectors/mounts needed for the optimum functioning of the hardware with specifications needed and as per direction of Engineer-in-charge.

VR Application Development: MR Refers to the development of the virtual reality software spesific to the intallation

Integration / Installation MR This includes the setting up of the physical installation including mointing of the projectors /screens/and loading and executuin of the required software/licenses

UI / UX MR Refers to the designig of the user interface and the complete user journey of the specific application/installation

Assets MR Refers to the various elements required of the specific installation.The assets are created in the various required computer software

32inch Commercial Display MR Supply and installation of Accessories with specifications mentioned below and as per direction of Engineer-in-charge. LG 32inch Commercial Display MR LG 32 Commercial Display: 16:9, Original, 4:3, Vertical Zoom, All-Direction Zoom, Audio output 3W +3W, 6 modes (Standard, Cinema, Clear voice, Cricket, Bollywood, Game), Self Diagnostics (USB), Multi IR Code, IR Out, HTNG/HDMI-CEC, WXHXD/Weight - 734X474X172/4.7kg

Supply and installation of Computer Intel Core i3 with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Gigabyte Brix RAM 4GB DDR4 Storage 128GB SSD Display Adapter Intel® Graphics Nework Adapter Gigabit Ethernet LAN 10/100/1000 MR

Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge: Windows 10 Professional (OEM License) MR

Cables / Connectors for the zone MR refers to the various wire/connectors needed for the optimum functioning of the hardware with specifications needed and as per direction of Engineer-in-charge.

Content Playback Application MR refers to the development of the software application to playback the content seamlessly

Integration / Installation MR This includes the setting up of the physical installation including mointing of the projectors /screens/and loading and executuin of the required software/licenses

Headphone MR Supply and installation of Headphones with specifications mentioned below and as per direction of Engineer-in-charge. Description Noise-Cancelling On-Ear Headphones Drivers 40mm Frequency Response 20Hz - 20 kHz

Asus Stick MR Supply and installation of Accessories with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Asus RT-AC58U Description AC1300 Dual Band WiFi Router Network Standards IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, IPv4, IPv6 Peak Data Rate up to 867 Mbps (@ 802.11ac)

Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge: Windows 10 Professional (OEM License) MR

7inch TouchScreen MR Supply and installation of router with specifications mentioned below and as per direction of Engineer-in-charge.Description Touch Screen Interface with Control Hardware Screen Size 7"

Cables / Connectors for the zone MR refers to the various wire/connectors needed for the optimum functioning of the hardware with specifications needed and as per direction of Engineer-in-charge.

Juke Box Software playing software : This Application will be responsible to manage the media and give an interface simillar to a jukebox to play content. MR

Integration / Installation MR This includes the setting up of the physical installation including mointing of the projectors /screens/and loading and executuin of the required software/licenses

Computer MR Supply and installation of Processor Intel Core i7 8700 (8th Generation) with specifications mentioned below and as per direction of Engineer-in-charge: Mainboard Gigabyte B310M Motherboard RAM 16 GB Kingston DDR4 HyperX RAM Storage 256 GB SSD Display Adapter Nvidia GTX 1060 4GB VRAM Network Adapter Gigabit Ethernet LAN 10/100/1000 HID Dell USB Keyboard + Mouse Combo

Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge: Windows 10 Professional (OEM License) MR

Samsung 43inch Capacitive Touch Screen Display MR Brand and Model Samsung PM43F-BC Display Type 60Hz E-LED BLU Screen Size 43" Resolution 1920x1080 (Full HD) Active Display Area 1209.6mm (H) x 680.4mm (V) Brightness 350 nit Pixel Pitch 0.49(H) x 0.49(V) Contrast Ratio 3000:1 Viewing Angle 178:178 Colour Depth 10bit Dithering - 1.07Billion | Gamut 72%

Supply and installation of Speakers with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model QSC CP8 Configuration Two-way active loudspeaker LF Transducer: 8 in (203 mm), cone HF Transducer: 1.4 in (35.6 mm) compression driver Frequency Response (-6 dB) 56 - 20 kHz Frequency Range (-10 dB) 53 - 20 kHz Nominal Coverage Angle: 90° Axisymetric Maximum Rated SPL1: 124 dB AC Power Input: Universal power supply 100 – 240 VAC, 50 – 60 Hz AC Power Consumption (1/8th Power): 100 VAC, 0.75A - 240VAC 0.31A MR

Cables / Connectors for the zone MR refers to the various wire/connectors needed for the optimum functioning of the hardware with specifications needed and as per direction of Engineer-in-charge.

Games MR Refers to the various software development process to achieve the desired game for the installation

Integration / Installation MR This includes the setting up of the physical installation including mointing of the projectors /screens/and loading and executuin of the required software/licenses

22inch Screen MR Brand and Model Dell E2418HN Display Type In-Plane Switching Panel Screen Size 60.47 cm (23.8") Resolution 1920 x 1080 at 60Hz (16:9) Brightness 250 cd/m² Pixel Pitch 0.275 mm x 0.275 mm Pixel Density 93 PPI Viewing Angle 178° vertical / 178° horizontal Colour Depth 16.7 Million colors Input Connections 1 x HDMI v1.4 + 1 x VGA

Supply and installation of Computer Intel Core i3 with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Gigabyte Brix RAM 4GB DDR4 Storage 128GB SSD Display Adapter Intel® Graphics Nework Adapter Gigabit Ethernet LAN 10/100/1000 MR

Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge: Windows 10 Professional (OEM License) MR

Cables / Connectors for the zone MR refers to the various wire/connectors needed for the optimum functioning of the hardware with specifications needed and as per direction of Engineer-in-charge.

Content Player MR refers to design the software playing content seamlessly

Integration / Installation MR This includes the setting up of the physical installation including mointing of the projectors /screens/and loading and executuin of the required software/licenses

Footages and content development MR Refers to the aqusition of various arcivial footages and other required assets/animation done for the sepcific installation

Oculus Go: MR Hardware to showcase and play 360 envoirments

Router: MR Brand and Model Dlink DGS-1210-28 Description 24 Port Web Smart Switch Ports 24 10/100/1000Base-T ports + 4 SFP ports

10 inch TouchScreen MR Supply and installation of router with specifications mentioned below and as per direction of Engineer-in-charge.Description Touch Screen Interface with Control Hardware Screen Size 10"

Asus stick computer MR Brand and Model Asus RT-AC58U Description AC1300 Dual Band WiFi Router Network Standards IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, IPv4, IPv6 Peak Data Rate up to 867 Mbps (@ 802.11ac)

Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge: Windows 10 Professional (OEM License) MR

Cables / Mounts: MR refers to the various wire/connectors/mounts needed for the optimum functioning of the hardware with specifications needed and as per direction of Engineer-in-charge.

VR Application Development: MR MR Creation of the virtual reality application whcoh enable the viewer to experince the subjec into 360

Integration / Installation MR This includes the setting up of the physical installation including mointing of the projectors /screens/and loading and executuin of the required software/licenses

UI / UX MR Refers to the designig of the user interface and the complete user journey of the specific application/installation

Assets MR Refers to the various elements required of the specific installation.The assets are created in the various required computer software

Projector:7000 Lumen Short Throw Laser Projector "Supply and installation of Projector with specifications mentioned below and as per direction of Engineer-in-charge. EPSON 7905 Projection System High-aperture Epson 3-chip, 3LCD technology LCD Panel 0.79"" Poly-silicon TFT Active Matrix Color Light Output 7,000 lumens White Light Output 7,000 lumens LCD Image Resolution WUXGA, 1920 x 1200, 16:10 Colour Reproduction 30 bits, 1.07B Color (10+10+10) Throw Ratio 1.44 – 2.32 Lensing Standard Optical : f1.7-2.3 | 24.0mm - 38.2mm Zoom Zoom 1 - 1.6 " "Supply and installation of Short Throw Lens with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Epson Short Throw Lens ELPLX01 Zoom Ratio 0 Throw Ratio (4.3) 0.36 Throw Ratio (16:10) 0.35 " MR

Motion Sensor: MR Refers to the device that detect motion/movement and accordingly programd to trigger specific actios achieved via computer programing.

Supply and installation of Computer Intel Core i3 with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Gigabyte Brix RAM 4GB DDR4 Storage 128GB SSD Display Adapter Intel® Graphics Nework Adapter Gigabit Ethernet LAN 10/100/1000 MR

Supply and installation of Processor Intel Core i7 8700 (8th Generation) with specifications mentioned below and as per direction of Engineer-in-charge: Mainboard Gigabyte B310M Motherboard RAM 16 GB Kingston DDR4 HyperX RAM Storage 256 GB SSD Display Adapter Nvidia GTX 1660 6GB VRAM Network Adapter Gigabit Ethernet LAN 10/100/1000 HID Dell USB Keyboard + Mouse Combo MR

Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge: Windows 10 Professional (OEM License) MR

Customised Hardware: MR This refers to the various custom hardware modules developed specifically fo the required installation

Cables / Connectors for the zone: MR refers to the various wire/connectors needed for the optimum functioning of the hardware with specifications needed and as per direction of Engineer-in-charge

Game Development: MR Refers to the software development required for the installation

Health Analysis: This system shall be able to analyse the Health quotient based on the set parameters such as weight, strength, height and interactive questionaire. MR

Video Loop and Game Assets: MR Development of the game asset in various software and video loops as placeholders for required durations

Server: "Supply and installation of Processor Intel Xeon E3-1225 v5 with specifications mentioned below and as per direction of Engineer-in-charge. Chipset Intel C236 RAM 8GB DDR4 Storage 1TB SATA HDD Network Controller Intel®I219-LM Gigabit Ethernet LAN 10/100/1000" "Supply and installation of Commercial Display with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Dell E2219HN Display Type LED-backlit LCD monitor Screen Size 54.61cm (21.5"") Resolution 1920 x 1080 @ 60Hz (16:9) Brightness 250 cd/m² Pixel Pitch 0.248mm Pixel Density 102 PPI Viewing Angle 178° vertical / 178° horizontal Colour Depth 16.7 Million colors Input Connections 1 x HDMI v1.4 + 1 x VGA" MR

Supply and installation of Server Rack with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model WQ India Size 12 U MR

Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge: Windows 2016 Server (OEM License) MR

Display:24inch Dell MR Supply and installation of Commercial Display with specifications mentioned below and as per direction of Engineer-in-charge: Brand and Model Dell E2418HN Display Type In-Plane Switching Panel Screen Size 60.47 cm (23.8") Resolution 1920 x 1080 at 60Hz (16:9) Brightness 250 cd/m² Pixel Pitch 0.275 mm x 0.275 mm Pixel Density 93 PPI Viewing Angle 178° vertical / 178° horizontal Colour Depth 16.7 Million colors Input Connections 1 x HDMI v1.4 + 1 x VGA

Supply and installation of accessories with specifications mentioned below and as per direction of Engineer-in-charge: DLink CAT6 Cable (1000 ft) MR

Supply and installation of Accessories with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Dlink DGS-1210-28 Description 24 Port Web Smart Switch Ports 24 10/100/1000Base-T ports + 4 SFP ports: MR

Networking: This refers to the Networking to be done in the entire premise which includes connecting the network cables, setting up the network switch, setting up the server for the zone and its required applications for the data to flow seamlessly MR

Central Management System: Development of two independent softwares that will manage multiple installations across technologies (maximum of 30 such installations) spread across total area of approx. 40,000 sq.ft., in total two zones at the leisure park. These softwares also manage the central controls which include switching on, sound decibel management, system tripping, single button activation and power management. MR.

Integration / Installation MR This includes the setting up of the physical installation including mointing of the projectors /screens/and loading and executuin of the required software/licenses

Supply and installation of Computer Intel Core i3 with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Gigabyte Brix RAM 4GB DDR4 Storage 128GB SSD Display Adapter Intel® Graphics Nework Adapter Gigabit Ethernet LAN 10/100/1000 MR

32inch Commercial Display MR Supply and installation of Accessories with specifications mentioned below and as per direction of Engineer-in-charge. LG 32inch Commercial Display MR LG 32 Commercial Display: 16:9, Original, 4:3, Vertical Zoom, All-Direction Zoom, Audio output 3W +3W, 6 modes (Standard, Cinema, Clear voice, Cricket, Bollywood, Game), Self Diagnostics (USB), Multi IR Code, IR Out, HTNG/HDMI-CEC, WXHXD/Weight - 734X474X172/4.7kg

Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge: Windows 10 Professional (OEM License) MR

Cameras : Logitech C920 -Full HD 1080p video calling (up to 1920 x 1080 pixels) with the latest version of Skype for Windows - 720p HD video calling (up to 1280 x 720 pixels) with supported clients - Full HD video recording (up to 1920 x 1080 pixels) - H.264 video compression - Built-in dual stereo mics with automatic noise reduction - Automatic low-light correction MR

Cables / Connectors for the zone MR refers to the various wire/connectors needed for the optimum functioning of the hardware with specifications needed and as per direction of Engineer-in-charge.

Content Playback Application with Sensing MR refers to the development of the application which has a sesning module thattriggers the same content

Integration / Installation MR This includes the setting up of the physical installation including mointing of the projectors /screens/and loading and executuin of the required software/licenses

Supply and installation of 55inch Samsung Capacitive Touchscreen MR Viewsonic IFP5550 as per direction of Engineer-in-charge 55inch Samsung Capacitive Touchscreen MR Viewsonic IFP5550

Supply and installation of Computer Intel Core i5 with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Gigabyte Brix RAM 8GB DDR4 Storage 240GB SSD Display Adapter Intel® Graphics Nework Adapter Gigabit Ethernet LAN 10/100/1000 MR

Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge: Windows 10 Professional (OEM License) MR

32inch Commercial Display MR Supply and installation of Accessories with specifications mentioned below and as per direction of Engineer-in-charge. LG 32inch Commercial Display MR LG 32 Commercial Display: 16:9, Original, 4:3, Vertical Zoom, All-Direction Zoom, Audio output 3W +3W, 6 modes (Standard, Cinema, Clear voice, Cricket, Bollywood, Game), Self Diagnostics (USB), Multi IR Code, IR Out, HTNG/HDMI-CEC, WXHXD/Weight - 734X474X172/4.7kg

Supply and installation of Computer Intel Core i3 with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model Gigabyte Brix RAM 4GB DDR4 Storage 128GB SSD Display Adapter Intel® Graphics Nework Adapter Gigabit Ethernet LAN 10/100/1000 MR

Supply and installation of Speakers with specifications mentioned below and as per direction of Engineer-in-charge. Brand and Model QSC CP8 Configuration Two-way active loudspeaker LF Transducer: 8 in (203 mm), cone HF Transducer: 1.4 in (35.6 mm) compression driver Frequency Response (-6 dB) 56 - 20 kHz Frequency Range (-10 dB) 53 - 20 kHz Nominal Coverage Angle: 90° Axisymetric Maximum Rated SPL1: 124 dB AC Power Input: Universal power supply 100 – 240 VAC, 50 – 60 Hz AC Power Consumption (1/8th Power): 100 VAC, 0.75A - 240VAC 0.31A MR

Integration / Installation MR This includes the setting up of the physical installation including mointing of the projectors /screens/and loading and executuin of the required software/licenses

Content + Editing refres to the development of the required content and subsequent editing to achive the final story. MR

Cables / Connectors for the zone MR refers to the various wire/connectors needed for the optimum functioning of the hardware with specifications needed and as per direction of Engineer-in-charge.

Digital Book Application Refers to the development of the software that replicates the physical book format digitally

PERISCOPE- Story and content development : - It is based on the concept development

SOUNDS OF BALASAHEB - Script / Content : This refers to the forming of the story in written form,wherein the idea beind the installtion is visualised and thought of.The same script is then reffered for all cgi creation and further development .

SOUNDS OF BALASAHEB - UI / UX This is design balance process it balances technical functionality and visual elements. this is to create a system that is is not only operational but also usable and adaptable to changing user needs.

PROBLEMS OF MARATHI MANUS - Script / Content : This refers to the forming of the story in written form,wherein the idea beind the installtion is visualised and thought of.The same script is then reffered for all cgi creation and further development .

PROBLEMS OF MARATHI MANUS- UI / UX This is design balance process it balances technical functionality and visual elements. this is to create a system that is is not only operational but also usable and adaptable to changing user needs.

Content playback application with sensing.

INSIDE MATOSHREE - UI / UX This is design balance process it balances technical functionality and visual elements. this is to create a system that is is not only operational but also usable and adaptable to changing user needs.

BALASAHEB CRICKET - UI / UX This is design balance process it balances technical functionality and visual elements. this is to create a system that is is not only operational but also usable and adaptable to changing user needs.

BALASAHEB MUSIC - UI / UX This is design balance process it balances technical functionality and visual elements. this is to create a system that is is not only operational but also usable and adaptable to changing user needs.

SOUNDS OF BALASAHEB - Script / Content : This refers to the forming of the story in written form,wherein the idea beind the installtion is visualised and thought of.The same script is then reffered for all cgi creation and further development .

SOUNDS OF BALASAHEB - UI / UX This is design balance process it balances technical functionality and visual elements. this is to create a system that is is not only operational but also usable and adaptable to changing user needs.

SOUNDS OF BALASAHEB - Content playback application with controller

Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/CW

Point wiring in PVC trunking (casing-capping) with 1.0 sqm FR grade copper wire with flush type switch and required accessaries as per specification No: WG-PW/SW

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and drawing of 2x1.5 sq.mm. FRLSH grade copper wires with 1.5 sq.mm earth wire in provided concealed pipes and terminating on modular accessories in box for point wiring for independent plug as per specification No WG-PW/SW

Supplying and erecting modular type 5 pin socket with safety shutters 3 module socket 6A 240V AC supply, duly erected on provided plate and box with wiring connections complete duly erected.

Supplying and erecting 16 / 20 / 25 A starter (modular range) 2 module for AC unit on provided box complete & duly concealed with necessary material and connected.

Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting mains with 3x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting HMS PVC conduit FRLS grade 20 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and erecting PVC slotted box trunking of size 100x100 mm. with accessories on wall/ceiling as per specification No: WG-MA/SLBOX

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete.

Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.

Providing and back filling ground enhancing compound 25 kg bag complete

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.

Supplying and laying rigid steel conduit 16 SWG 20 mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No: WGMA/CC.

Supplying and erecting bulk head LED fitting max. 10W (including 10W LED)with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 having 2 mm thickness up to 3.3 kV

Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated complete

Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic solution, etc. (All above contents shall be of standard makes)

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 500 mm width & 75 mm height complete with necessary coupler plates & hardware.

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware.

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware.

Supplying and erecting PVC box trunking of size 75x50 mm. with accessories on wall/ceiling as per specification No: WG-MA/BOX.

Supplying and erecting PVC box trunking of size 75x75 mm. with accessories on wall/ceiling as per specification No: WG-MA/BOX.

Supplying and erecting LED square / circular Max. 11 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1200 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED square / circular Max. 25 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED Panel Light(600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.

Supplying & erecting integral post top lantern fixtures (globe type) suitable for LED lamp upto 12 W consisting of aesthetic round clear acrylic top cover, cast aluminium pole cap on provided pole /bracket as per specification no. FG-ODF/PTL

Supplying and erecting regular/ standard model ceiling fan of 1400mm. Sweep complete erected in position as per specification no. FG-FN/CF

Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/1200/ 1400 mm. sweep, complete erected on provided switch board.

Supplying and erecting fan clamp of 30 x 5 mm. M.S. flat of required length and 10 mm. M.S. bolt and nuts erected with necessary hook of 10 mm. M.S. round bar and painted

Supplying and erecting fan hook of 10 mm. M.S. round bar grouted in RCC slab with making the site as original.

Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

Supplying pedestal type air circulator 450 mm. sweep oscillating type suitable to work on 230 Volts 50 cycles 1440 RPM with speed regulator, metallic blades, overhead protection unit, totally enclosed, flame proof motor with additional 3 core wire, 5 meter length and hand shield type 3 pin 5A. plug top complete with moisture proof treatment and ‘E’ class insulation.

Supplying and erecting air circulator 450 mm. sweep oscillating type, wall mounting 1440 RPM with speed regulator, overheat protection unit, totally enclosed, flame proof motor suitable for 230/250 Volts single phase, 50 cycles A.C. supply, with one meter of 3 core lead wire and with moisture proof treatment to winding and with ‘E’ class insulation

Supplying and erecting exhaust fan heavy duty 230 V, A.C. 50 cycles 375/380 mm. 900 RPM complete erected in position as per specification no. FG-FN/EXF

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid inprovided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 25 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 120 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½core 240 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 2.5 to 16 sq mm., with necessary material as per specification No. CB-JT/LT

Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 25 to 50 sq mm., with necessary material as per specification No. CB-JT/LT

Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 70 to 120 sq mm., with necessary material as per specification No. CB-JT/LT

Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 240 to 300 sq mm., with necessary material as per specification no. CB-JT/LT

Providing & erecting 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m octagonal / conical GI pole).

Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mmdia. G.l. Rod complete with all materials as per specification no. EAEP

SITC of Flood Light LED 120 Watt

Supply and erection of Hot dip galvanized Ring for installation of mini high mast suitable for 4 Nos of LED Flood lights. The outer dia of ring shall be 600 mm. The ring shall be of 50 mm dia B class pipe with three supports to Sleeve, the sleeve shall be of 500 mm length and 4 mm thick duly provision of 4 nos bols and shall be suitable to fit on Octagonal pole of 70 mm AF.

Providing PU paint to Octogonal poles as required of desired colour duly finished in an approved manner for 7 mtrs octogonal pole

Providing PU paint / Powder coating as required of desired colour duly finished in an approved manner for 600 mm dia mini high mast ring.

Supplying and erecting street light Wall bracket made from 40 mm. dia ‘ G.I. pipe 1.2 m. in total length complete as per specification no. FG-BKT/WB

SITC of Street Light LED 60 Watt

Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50Hz nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with partially stainless steel body as per specification no. APWCR/WC

Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity, choke made of copper wire, two indicator lamps, dual function cartridge with output of purified water 1 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system.

Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)

Supplying and erecting midget type 3.0 litres instant type water heater of rustproof & shockproof ABS plastic body, high grade SS inner tank & 3kW heating element with corrosion & hard water protection, with minimum 3 safety protections (i.e. thermostat & thermal cut-out, function valve) complete with 6.5 bar pressure withstanding capacity 230/250V, 50Hz, A.C. supply with inlet and outlet, with 3 core PVC flexible copper wire leads duly tested and marking sr. no. and date of erection complete

Supplying, installing, testing & commissioning compact substation with 3 phase, 11/0.433 kV, 50 Hz., 500 kVA, Mineral Oil immersed Copper wound, without gas cushioning , hermetically Sealed transformer having indoor type transformer bushings, with HT side (incoming side) load break switch of appropriate capacity and LT side (outgoing side) MCCBs (4 pole) of appropriate capacity , with inbuilt metering cubical, using type A winding insulation (kraft paper),standard accessories complete with test certificate with losses below 1510 Watts at 50% load, 4300 Watts at 100% load for transformer, as per IS:1180 (part 1) : 2014 , with necessary permissions of Electrical Inspectors per specification no SS- TR-SL.

Supplying, erecting, testing and commissioning of diesel generating set with alternator of 250 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 42.30 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 425 Ltr etc. on provided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG

Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of above 200 kVA up to 250 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF.

Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 22 kV(E), 3 x 300 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT

Providing and erecting Heat shrinkable indoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessary material as per specification no. CB-JT/HT

Providing and erecting Heat shrinkable outdoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessary material as per specification no. CB-JT/HT

Making transformer plinth (1.5 x 1.5 x 1.5) m in size with necessary excavation in ground with 150 mm. thick M- 10 PCC at the bottom and top and 250 mm. thick, burnt brick wall constructed at periphery and remaining hollow portion shall be filled with 40mm hard broken aggregate. External surface duly plastered by 12 mm thick including watering etc complete.

Providing & erecting 4 Pole MCCB, 415V, 800A, rated short-circuit breaking capacity 50 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Providing & erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-SWR/MCCB

Providing & erecting 4 Pole MCCB 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Providing & erecting 3 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Providing & erecting 4 Pole MCCB, 415 V,63/ 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for above 630A up to 800A MCCB.

Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for above 250A up to 630A MCCB.

Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for up to 250A MCCB.

Supplying and erecting terminal spreaders suitable for 4 pole, above 630A up to 800A MCCB (Set of 8)

Supplying and erecting terminal spreaders suitable for 4 pole, above 100A up to 250A MCCB (Set of 8)

Providing and installing of Cu links of 50 sq.mm with copper lugs for connecting the switchgear to Busbars

Supplying and erecting LT CT multifunction DLMS compliance energy meter of accuracy of class 0.5 , 3x240V,50 Hz with optical & RS 232 port, backlit LCD, measure & display trivector energy, load survey, TOD, tamper detection & logging, power ON /OFF events, instantaneous parameters of rating 1/5 A with display in absence of power complete with zero adjustment & test certificate from manufacturer erected on provided M.S. box and connected to CTs.

Supplying and erecting 250 kVAr, 3 phase, 50 Hz., Power contactors Derated for microprocessor APFC controller with MPP / APP type capacitor with 525 V and having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours with , consisting of suitable steps of MPP / APP type capacitor units with detuned aluminium filter 7% reactors with circuit breaker as main incomer and MCCB for each branch protection, as per specification no CP-ED/APFC

Supplying and erecting ON LOAD four pole automatic transfer switch, 415V, 400A, 50 Hz with enclosure, flexibility of neutral connection, line and load reversibility, changeover with phase barriers, source separator, terminal covers along with staggered termination for cable connection and ATS controller with provision of time delay protection of OV, UV, phase sequence changing, single phasing and event logging, connected with provided leads complete complying to IS/IEC 60947-3 Part-1/6 .

Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.

Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc.

Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc.

Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 800A having 100mm (Width) X 5 mm (Thickness), with 99.9 % aluminium purity as per E91E Grade & Current Density 0.8 A per sq. mm. compliance to IS 5082 and enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification no. CPBB

Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 400A having 50mm (Width) X 5 mm (Thickness), with 99.9 % aluminium purity as per E91E Grade & Current Density 0.8 A per sq. mm. compliance to IS 5082 and enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification no. CPBB

Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity 99.9% aluminium purity with E91E Grade as per IS 5082 & Current Density 0.8 A per sq. mm. with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCP-BB

S & E of aluminium strip to provide the support for the connectors

Supplying and erecting enamel iron G.I. sheet 1.25mm (18 gauge) caution board of size 200 x 150 mm. as per I.S. 2551 of 1982 in Marathi and Hindi erected at position.

Providing Required Hardware Like good quality and Various Sizes of Nut , Bolt ,Washer ,Spring washer Etc for Exiting Electrical panels for connecting Cables Etc.

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/ 4 pole MCCB as incomer & outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (36 poles) or TP MCB of 12 ways (36 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking DPMCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 12 ways /phase (36 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying, erecting & commissioning 2 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

SITC of Electric Traction Passenger Lift with · Rated capacity :- 10 Passenger/680Kg · Floors :- G+1 floor (2 Stops/2 Landings) · Travel :- 3 to 4.2 mtrs · Location of Lift Machine:- MR/MRL · Rated speed :- 1.0mps VS · Car/Landing door clear opening of 800 mm wide x 2000 mm high · Clear Car size of 1100 mm wide x 1400 mm deep x 2250mm high · Lift shaft available having clear size of 2500 mm wide x 2000mm deep. · Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). · Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge. · COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor. · LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings.Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters. The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class. · ARD complete with necessary SMF VRLA batteries. · Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2 nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min.18” FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge.· Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength. · Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work.· Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT. · General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning.

Supply, Installation, Testing and Commissioning of 4 Zone Microprocessor base conventional type fire alarm control panel includes power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and then be capable of operating the system for 2 hours during an emergency conditions as required. Main product Make of Agni/ Apollo/Ravel / or Equivalent

Supply, Installation, testing & commissioning of conventional type smoke Detector complete . to be installed under / above false ceiling, roof and concealed space, etc. Smoke Detectors with Base Make of Agni/ Apollo/Ravel or Equivalent

Supply, Installation, testing & Commissioning of conventional Hooter Make of Agni/ Apollo/Ravel or Equivalent.

Supplying, erecting testing and commissioning manual call point (Pill box) with break glass, push button (resettable type) in metal enclosure complete as per specification no. FF-FAAS/MCP

Supplying and erecting XLPE armoured cable 2 core 1.5 sq. mm FRLS copper conductor complete erected on wall / celling as per specification

Supply, Installation, testing & ommissioning of multi sensor heat detector with smoke and heat combination (RoR + fix temperature) with base on back box, necessary connections complete as per specification no. FF-FAS/HD

Supply, Installation, Testing and Commissioning of Response indicator

Supplying, erecting, testing and commissioning 120 W amplifier suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply complete as per specification no. FF-PA/AFR

Supplying, erecting, testing and commissioning 15 to 30 Watts sound column or ceiling mounted complete as per specification no. FF-PA/SOC

Supplying, erecting, testing and commissioning stand mounted/handheld type wired microphone having 2 mV/Pa sensitivity, impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to +55 deg C with min. 7 metre shielded cable and 3 Pin Professional XLR Connector, stereo jack complete as per specification no. FF-PA/MIC

Supplying, erecting, testing and commissioning rust free microphone table stand of chrome plating/powder coating or S.S. material, up to 500 mm height and suitable base for sturdy mechanism ensuring trouble free movement complete.

Supplying, erecting, testing and commissioning of 2 core shielded cable complete as per specification no. FF-PA/MCC

Supplying, installing, testing & commissioning cassette type room Air conditioning unit 2.8TR to 3.3TR capacity with refrigerant R32/R410A 415V, 50 Hz, A.C. supply having 1 no of air handling unit (Mega split) mounting type complete with temperature display on indoor unit, dust filter, noise level maximum 50dBA at position as per specification no. APAC/ WAC

Supplying, installing, testing & commissioning cassette type room Air conditioning unit 3.4TR to 3.9TR capacity with refrigerant R32/410A 415V, 50 Hz, A.C. supply having 1 no of air handling unit (Mega split) mounting type complete with temperature display on indoor unit, minimum dust filter, noise level maximum 50dBA at position as per specification no. APAC/ WAC

Supplying, installing, testing & commissioning cassette type room Air conditioning unit 4TR to 4.4TR capacity with refrigerant R32/410A 415V, 50 Hz, A.C. supply having 1 no of air handling unit (Mega split) mounting type complete with temperature display on indoor unit, minimum dust filter, noise level maximum 50dBA at position as per specification no. APAC/ WAC

Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC

supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 28.6mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete.

Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 22mm complete.

Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 16mm complete.

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 16 mm for solar water heater/AC system.

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 22 mm for solar water heater/AC system.

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supply Installation Testing & commissioning Of 4MP Network IR Dome/ Bullet camera ,Smart IR ,Optical glass window with higher light transmittance, 3D DNR (Digital Noise Reduction)ONVIF Conformance,Structure.WDR 120 or Above Wide temperature range: -35°C to 60°C31°F to 140°F)IP66, Lens 3.6mm/4 mm,Angle of view (H): 80.5°Day/Night ,IR Range Up to 30m (98 ft) WDR Digital Max. Resolution 1920×1080,ROI Supported,vedio Compression H.265/MJPEG OSD Up to 8 OSDs, Power12 V DC, or PoE

Supply Installation Testing & commissioning Of Network Video Recorder 32 channel input,Support 2-ch HDMI Up to 12 Megapixels resolution recording, Support RAID 0, 1, 5, 6, 1&,8 SATA HDDs, Up to 8TB for each HDD, Support N+1 Hot spare, Support for 12V Power output, HDMI/VGA Output, Recording Resolution, Resolution 12MP/6MP/5MP/4MP/ 3MP/1080p/960p/720p/D1/2CIF/CIF, Compression H.265/H.264, 8 SATA interfaces,Capacity up to 8TB for each HDDs, Array Type RAID 0, 1, 5, 6, 10.

Supply Installation Testing & commissioning of 43"TV Equivalent to:- LG

Supplying & erecting UPS of 1 KVA capacity complete with standard features, along with necessary SMF batteries for 20 mins. batterv backup

Supplying, erecting, testing and commissioning of 2kVA capacity online pure sine wave, with backup time. PWM & IGBT based UPS with 0.8 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. AP-UPS

Supply Installation Testing & commissioning of 8000 GB Hard Disk for video Surveillance Equivalent to:- Western Digital /Seagate

Supplying, fixing, and configuring 8-ports 1 G unmanaged gigabit POE switch erected in provided rack complete

Supplying, fixing, and configuring 8-ports managed gigabit, Layer-2 switch,10/100/1000 base-T, POE smart switch plus 2 SFP erected in provided rack complete.

Supply, Installation, Testing UTP Connector (RJ-45) as per specification No.WG-NAS/UTPC.

Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 500x600x367 mm) as per specification No. WG-NAS/RAK

Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAK

Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With PVC accessories on wall /ceiling as per specification No: WG-MA/CON.

Second Year Comprehensive Maintenance of all electrical works (2.5% of Estimate Cost)

Third Year Comprehensive Maintenance of all electrical works (4% of Estimate Cost)

Fourth Year Comprehensive Maintenance of all electrical works (5.5% of Estimate Cost)

Fifth Year Comprehensive Maintenance of all electrical works (7.0% of Estimate Cost)

Supplying Skilled labour for Operation & maintenance for 1st year

Supplying Unskilled labour for Operation & maintenance for 1st year

Supplying Skilled labour for Operation & maintenance for 2nd year

Supplying Unskilled labour for Operation & maintenance for 2nd year

Comprehensive Maintenance 2nd year on IT items

Supplying Skilled labour for Operation & maintenance for 3rd year

Supplying Unskilled labour for Operation & maintenance for 3rd year

Comprehensive Maintenance 3rdd year on IT items

Supplying Skilled labour for Operation & maintenance for 4th year

Supplying Unskilled labour for Operation & maintenance for 4th year

Comprehensive Maintenance 4th year on IT items

Supplying Skilled labour for Operation & maintenance for 5th year

Supplying Unskilled labour for Operation & maintenance for 5th year

Comprehensive Maintenance 5th year on IT items

Dev Engineers