Renovation of existing Record Room and Store Room of DC Office at Car Nicobar.

Amount

Providing and fixing Towel ring Square with concealed fittings arrangement of approved quality and colour of make Jaquar ( No. AKP- 35721P) or equivalent.

Providing and fixing Wall Hung basin size 565x465x195 mm with fixing accessories (Code SLS-WHT -6801) with full pedestal (Code SLS-WHT -6801) of make Jaquar or equivalent as per the direction of Egnineer-in-charge.

Providing and fixing Soap dish holder of (Code No. AKP-35731P) of Make jaquar or equivalent as per the direction of Engineer-In-Charge.

Providing and fixing Tumbler holder of (Code No. AKP-35741P) of Make jaquar or equivalent as per the direction of Engineer-In-Charge.

Providing and fixing Single towel rail of (Code No. AKP - 35711PS) of Make jaquar or equivalent as per the direction of Engineer-In-Charge. 600 mm long towel rail

Providing and fixing Toilet Roll Holder of (Code No. AKP-35751P) of Make jaquar or equivalent as per the direction of Engineer-In-Charge.

Providing and fixing Hand Shower (Health Faucet) with 8 mm dia, 1.20 meter long Flexible tube & wall Hook of (Code No. ALD-573) of Make jaquar or equivalent as per the direction of Engineer-In-Charge.

Providing and fixing Waste Coupling 32 mm size full thread with 130 mm height of make Jaquar (Code No. ALD-709L130) of good quality as per the direction of Engineer-In-Charge.

Providing and fixing Angular stop cock with wall flange of make Jaquar (Code No. CON-059KN) of good quality as per the direction Engineer-In-Charge. 15 mm nominal bore

Providing and fixing hot & cold lead connector pipe 450mm long Braided hose with two 15 mm nuts & rubber wahsers without nipple of make Jaquar or equivalent (Code No. ALD-805B ) of good quality as per the direction of Engineer-in-charge.

Providing and fixing two way bib cock with wall flange of (Code No.LYR-38041) of Jaquar or rquivalent of good quality as per the direction of Engineer-In-Charge..

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and Fixing factory made uPVC door frame, made of uPVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer's specification and direction of Engineer-in-charge.

Providing and fixing glazing in aluminium /UPVC door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing Pillar Cock (Code No. FON-40011) of Jaquar or equivalent of good quality as per the direction of Engineer-In-Charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible pipe

32 mm dia

Providing and Fixing Steel grating.

Providing and fixing Soap dispenser- chrome (Code No. ACN-1135N) of Jaquar or equivalent of good quality as per the direction of Engineer-In-Charge.

Providing and fixing Double Coat Hook of (Code no. CAN-1161N) Jaquar or equivalent of good quality as per the direction of Engineer-In-Charge.

Providing and fixing bright finished brass door latch with necessary screws etc. complete :

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :

Two or more coats on old work