Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹14.0 L
Closing Date
2 Mar 2024, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Engineering Wing of Health and Family Welfare Department
Assistant Engineer
Up-gradation of basic infrastructure facilities to District Hospital Dharwad
EWHFWD/2023-24/BD/WORK_INDENT192
EWHFWD/2023-24/BD/WORK_INDENT192
Open
Buildings
Two Tender Document System(Two Cover)
EWHFWD Chief Engineer Office Bengaluru
5 documents required · 5 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Clause ITT 3.2(b)To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2018-19 to 2022-23) The tenderer should have been Satisfactorily completed at least one Satisfactorily completed at least one Similar work of value not less than Rs.467.50 Lakhs as prime contractor. Note : The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (b).
Clause 3.2(c) To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2018-19 to 2022-23).Executed in any one year, the following minimum quantities of work Sl. No Description of key items of works Quantity 1)Earthwork Excavation 2300.00 Cum,2)RCC and PCC 627.00 Cum,3)Steel Reinforcement for RCC work 33.00 tonne,4)Cement Concrete Block Masonry/Solid Block Masonry /Load Bearing Wall 290.00 Sqm,5)Flooring/Dadooing(Vitrified/Granite/Ceramic/Cement concrete/cladding/dadooing) 1202.00 Sqm,6)Plastering 2500.00 Sqm,7)Painting 29000.0.00 Sqm, 8)M.S grill work8165.00 kg 9)WPC 6480 Sqm 10)Truss work 14440.00kg. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2(c).
Clause 3.2(d) The tenderer or his identified sub contractor should possess required valid electrical license for executing building electrification works issued by KPWD/ Government electrical Inspectorate and should have executed similar Building electrical works totaling Rs.39.60 Lakhs in any one financial year.Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (d).The letter of willingness of the sub contractor to be engaged for electrical, should be obtained and uploaded in the KPP-portal.
Clause 3.2(e)The Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works issued by BWSSB/ KUWS&DB and should have executed similar building water supply/sanitary engineering works totaling Rs.14.50 Lakhs in any one financial year. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (e).The letter of willingness of the sub contractor to be engaged for water supply & Sanitary, should be obtained and uploaded in the KPP-portal
Clause 3.2(f) The Tenderer or his identified sub-contractor should have executed similar Fire Fighting works totaling to Rs. 125.40 Lakhs in any one year. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (f).
List of Minimum Key Personnel to be deployed by the contractor at site for Contract work Sl No Position Qualification and Requirement No of Persons.1)Site Engineer BE Civil with minimum experience of 7 years in the Construction of buildings or Diploma in Civil Engineering with minimum experience of 10 years in the Construction of buildings and should have been working in permanent role of the organization for at least two years 1 (One), 2)Electrical Engineer BE Electrical with minimum experience of 5 years in the Construction of buildings Or Diploma in Electrical Engineering with minimum experience of 10 years in the Construction of buildings and should have been working in permanent role of the organization for at least two years 1 (One).
Clause 3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated for prime contractor are as under Assessed available tender capacity AxNx1.5- B Where A maximum value of civil engineering works executed in any one year during the last five years 2018-19 to 2022-23 updated to 2023-24 price level taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. B Value, at 2023 24 price level of existing commitments and ongoing works to be completed during the next 11 months. Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.
KPWD Class-I Registration Certificate
Clause ITT 3.3 (a)Equipment capacity Each tenderer should further demonstrate(a) available by owning at least 50% of the required/specified key and critical equipment for this work and (b) the remaining 50% can be deployed on ease/hire basis for all works provided, the relevant documents (commitment agreements etc.,) for availability for this work are furnished. Sl.No. Description of Equipment Quantity 1) No Min 10 cft capacity Concrete Mixer-2 Nos. 2)Steel Centering sheets 300 sqmtr 3).Tipper-01No 4.Excavator-1 No
Clause ITT 3.2(a):To qualify for award of this contract, each Tenderer in his / its name should have in the last five years i.e.(2018-19 to 2022-23).The tenderer should have been achieved in at least two financial years a minimum annual financial turnover (in all classes of civil Engineering construction works only) of Rs.1870.00 Lakhs. Note: For Clause 3.2 (a) the Turn over certificate and balance sheet duly certified by the charted accountant is to be submitted.
Clause 3.3(b)Liquid assets and /or availability of credit facilities of not less than Rs.280.50Lakhs (Credit lines / letter of credit/ certificates from banks for meeting the fund requirement etc.(As per the prescribed format in clause 1.10 of SECTION 3, QUALIFICATION INFORMATION of this document.) as prime Contractor
₹5,000
₹14.0 L
17 Feb 2024
17 Feb 2024
4 Mar 2024
22 Feb 2024
23 Feb 2024
District Hospital Dharwad-Water Supply and Sanitary Work
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing CP Brass 32mm size Bottle Trap of
approved quality & make and as per the direction of Engineer in-charge. ---- etc.,complete with all lead
Providing and fixing 100 mm sand cast Iron grating for gully trap. ---- etc.,complete with all lead
Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms w ---- etc.,complete with all lead
Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing
not less than 60 g ---- etc.,complete with all lead
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest
amendments and conveying to worksite, rolling and lowering into
trenches, laying true to line and level and perfect linking at joi...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest
amendments and conveying to worksite, rolling and lowering into
trenches, laying true to line and level and perfect linking at joi...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest
amendments and conveying to worksite, rolling and lowering into
trenches, laying true to line and level and perfect linking at joi...
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for
cold water supply including all uPVC plain & brass threaded fittings
This includes jointing of pipes & fittings with one step ...
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for
cold water supply including all uPVC plain & brass threaded fittings
This includes jointing of pipes & fittings with one step ...
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for
cold water supply including all uPVC plain & brass threaded fittings
This includes jointing of pipes & fittings with one step ...
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for
cold water supply including all uPVC plain & brass threaded fittings
This includes jointing of pipes & fittings with one step ...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overf...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work sit...
Providing, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work sit...
Providing, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work sit...
Providing and constructing "WIRE CUT BRICK MACHINEHOLE CHAMBERS" using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved qu...
Constructing brick masonry manhole in cement mortar 1:4 1 cement : 4 coarse sand with R.C.C. top slab with 1:1.5:3 mix 1 cement : 1.5 coarse sand zone-III : 3 graded stone aggregate 20 mm nominal si...
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 1 cement : 4 coarse sand C.I. cover with frame light duty 500X700 mm internal dime...
Lowering laying, jointing, testing and commissioning of following diameters glazed stone ware pipes, conforming to IS 651:1992, (with 5th revision) in all respects jointing with EPDM rubber rings (sea...
Lowering laying, jointing, testing and commissioning of following diameters glazed stone ware pipes, conforming to IS 651:1992, (with 5th revision) in all respects jointing with EPDM rubber rings (sea...
Providing UNPLASTICISED PVCPipes of SN4, 200mm dia pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering ...
Providing UNPLASTICISED PVCPipes of SN4, 110mm dia pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering ...
Providing and fixing Chorinated Poly Vinyl Chloride CPVC pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting...
Providing and fixing Chorinated Poly Vinyl Chloride CPVC pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting...
Providing and fixing in position brass bib cock of approved quality 15mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. ----...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality screwed end : 25mm ---- etc.,complete with all lead
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality screwed end : 32mm ---- etc.,complete with all lead
Providing and fixing white vitreous china clay, flat back wash basin size 630x450mm with a pair of 15mm C.P brass pillar taps with C.I or M.S brackets, 32 mm C.P. brass waste of standard pattern, p...
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with t...
Providing and fixing Rectangular shape 453x357 mm mirror of superior glass of approved quality and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard...
Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet Anglo Indian W.C pan with seat and lid fixed with C.P. brass hinges and rubber b...
Providing and fixing PVC S.W.R Nahani Trap 10cms x 10cms with all fitting arrangements and all necessary accessories complete ---- etc.,complete with all lead
Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgsorsq.cm working pressure of outside diameter raising mains and exposed distribution pipes with special flang...
Constructing brick masonry inspection chamber Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 1 cement : 4 coarse sand C.I. cover ...
Earth work excavation for pipelinesorcables by Manual means upto 600 mmtrench width, as per drawing and technical specifications, including settingout, shoring, strutting, barricading, caution lights,...
Refilling available earth around trenchesorpipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5...
Providing and fixing 7.5 cms to 15.00 cms dia NP grating 100mm dia. ---- etc.,complete with all lead
Providing and fixing ball valve brass of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore ---- etc.,complete with all lead
District Hospital Dharwad-Civil Work
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engi...
Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles 10 mm to 25 ...
Demolishing R.C.C. work manually/ by mechanical means including stack ing of steel bars and disposal of unserviceable material to the appropriate
disposal area as per direction of Engineer-in-charge ...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, ty...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement :...
Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse ...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.125mm ---- etc.,complete with all lead
Providing and fixing Hold fasts M.S. for doors etc complete ---- etc.,complete with all lead
Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- etc.,complete with all lead
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete ---- etc.,complete with all lead
Providing and fixing chromium plated brass 100 mm mortice latch of approved quality with necessary screws etc. complete. ---- etc.,complete with all lead
Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws e...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing & fixing of glazed 2.5 Track-2 Panel Sliding Windows made out of multi Chamered UPVC sections with TPV gaskets having Isolated drainage and reinforced witgh Galvanized iron profiles through ...
Providing & fixing of louvered ventilator made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead ...
Providing and fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & joined 2 No.s of 150mm long brack...
Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat mo...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffo...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on ...
Providing and fixing skirting with teak shade pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, I...
Providing and laying linoleum plain flooring or coloured 3.2mm thick sheet / tiles laid with an approved adhesive on sub floor stretching, cutting and fixing complete , including cost of materials, la...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on new terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all col...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
GF: Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drop...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surfa...
Painting with oil type wood preservative of approved brand and manufacture :New work (two coats) to give an even shade including preparing the surface after thorougly cleaning oil, grease, di...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, ...
Finishing walls with Acrylic Smooth exterior paint of
required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2...
Providing and fixing precoated galvanised iron profile sheets size, shape and pitch of corrugation as approved by Engineer-in-charge 0.50 mm 0.05 percent total coated thickness with zinc coating 120 ...
Providing and fixing Steel work in built up tubular round, square or rectangular hollow tubes etc. trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved...
Providing and fixing precoated galvanised steel sheet roofingaccessories 0.50 mm 0.05 percent total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns ...
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm 0.05 percent total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns...
Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...
Earth work in surface excavation by mechanical means for lowering and leveling the ground for all works other than foundation in all kinds of soils and upto depth not exceeding 300mm as per drawing ...
Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and com...
Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of CandD waste by block making machine with vibratory compaction laid in requi...
Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 5...
MS FRP Bar Screen made up of Mild steel coated with Enamel, Bar Screen Diemesion:1000x1000 - Length :1000 mm, Width :1000 mm, Mild steel sheet Thickness: 3mm, inlet nozzel Dia :6 ", ou...
RAW SEWAGE TRANSFER PUMP
Raw Sewage transfer pump capable of handling, sewage transfer from collection tank to RBC STP Tank ,The type of the pump : Centrifugal monoblock, Impeller :open, motor HP: 3H...
STP Rectangular Tank Size and dimension: Length :14350 mm, Width : 1900 mm, Over Height including Top Cover : 3300 mm, MOC of rectangular Tank : Mild Steel - FRP, Shell Thickness: 5mm, FRP lining, Int...
Primary clarifier : Type : Lamella, No of Plates: 40, Lamella plate MOC: FRP, Lemella Plate Thickness: 1 mm ,Make: ORION. ---- etc.,complete with all lead
Secondary clarifier: Type : Lamella, No of Plates: 40, Lamella plate MOC: FRP, Lemella Plate Thickness: 1 mm Make: ORION. ---- etc.,complete with all lead
ROTOR: No of Rotors: 6 per tank , Moc: FRP, Diameter of Rotor : 1250mm, Connected with , Shaft : 80 Rod, Driven by : pillar Block, No of pillar block: 24 Make: ORION ---- etc.,complete with all lead
Bio Zone (Rotor Placement Boat) No. of Biozone : 2 No, No. of Partisian inside Bio-zone : 8 Nos, MOC : MSFRP, Boat curvature Diameter : 1500mm, Bio Zone supporting with 150mm, Beam 2 Nos & 4 Nos. Legs...
Gear Box : Type: Helical, No of Gear Box: 1 no, Make : Bonfigoli (Germany), Gear Box Motor HP: 5, Gear Box motor Make : ABB./eqv ---- etc.,complete with all lead
Internal Piping & Base Works : 1) Inter connecting pipe works with FRP lining inside process tank, Recirculion& drain system. 2)Base Plate works for Gear box arrangement,Rotor Fixing arrangement,Biozo...
FILTER FEED PUMP: Filter feed pump capable of handling to transfer clarifed to filtration plant maximum solid handling size upto 7 mm, The type of the pump: Centrifugal monoblock, Impeller : Closed...
SAND FILTER : Diameter: 1800 mm, Height On Straight: 1900 mm, Shell hickness: 5mm, Dish end Thickness: 5mm, Frontal Pipeline: 80NB, MOC: Mild Steel, External Coating : Red Oxide and Enamel paint, Inte...
ACTIVATED CARBON FILTER: Diameter: 1800 mm,Height On Straight: 1900 mm, Shell hickness: 5mm,Dish end Thickness : 5 mm, Frontal Pipeline: 80NB, MOC: Mild Steel, External Coating :Red Oxide and Enamel p...
CHLORINE DOSING SYSTEM, Pump type : ElectonicDiaphram
Capacity : 0- 10LPH, Nominal Back pressure : 5 KG/CM2, Maximum Back pressure: 3.5 KG/CM2
KW: 0.24 watt, Tank Capacity : 200 Liters, MOC: PP, Make ...
INTERCONNECTING PIPE WORK All necessary pipe work from Bar Screen chamber to collection tank, collection tank to Raw sewage transfer pump, Raw sewage transfer pump to RBC STP, RBC STP to Filter feed ...
CONTROL PANEL: Installation, testing and commissioning of Electrical Panel suitable for 415V, 3 phase, 4 wire, 50Hz distribution system. The panel shall be Wall Mounting type, sheet metal enclosed, fl...
FREIGHT LOADING AND UNLOADING : All the equipment shall be loaded ,transported and unloaded at site. Including the necessary Cranes required to erect and position the system ---- etc.,complete with al...
INSTALLATION, ERECTION, COMMISSIONING, TESTING AND HANDING OVER AT SITE. From the Inlet of the Bar Screen chamber to the output of Carbon filter ---- etc.,complete with all lead
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...
Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. T...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...
Providing 20mm square M.S. footrest and fixing in manhole with M-10 cement concrete block of 20x20x10cms, using 20mm and down size metal of size including cost of materials, labour charges, curing com...
Ladder inside the container, providing anodized ladder, using 65mm x 32mm section x 3.00 for ladder side canals x 25mm dia, flutal pipe for tungs at 250mm corc ladder fixed at an angle of 70 degrees t...
Providing and fixing 60 x 60 cms M.S inspection door with necessary M.S .frmae made out of M.S angle 50x50x6mm and M.S shutter of 31.5mm or B.G 10 thick with hinges on top and locking arrangements, pa...
Supplying installing, testing and commissioning of hydraulicallying operated sprinkler cabit valve with water meter gong bell and trims as required, pressure gauges drain valve, ball valves check valv...
Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The graniteor...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. Th...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. Th...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 1 cement : 5 coarse sand finished with a top layer 6 mm thick cement plaster with cement morta...
Providing and laying water proofing treatment to the Rafts, Below grade slab, Lift pits, water retaining structures with fully bonded High Density Polyethlene Membrane HDPE of 1.2mm composite thicknes...
Construction of Embankment by excavating the available approved Gravelor Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreadi...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corn...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...
Providing and fixing Aluminium fixtures like Aldrops of size 300 x 16 mm, Tower bolts of size 200 x 12 mm, Latches of size 250 x12 mm, 100 mm length oxidized Iron Hinges, Handles of size 150 mm, ...
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves excluding cost of cement concrete and sid...
Providing and fixing flush door shutter made out of solid core black board type, well seasoned chemically treated hard wood battens and internal frame with minimum 45 mm wide wooden frame allround doo...
Providing and fixing of louvered ventilator made out of multi chambered UPVCMatching to RAL9016 sections and with minimum TiO2Titanium Dioxide at 6PHR with TPEThermo Plastic Elastomer and lead free wi...
Providing and fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top and bottom rails, covered with heat moulde...
Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:4 including cutting the patches in proper shape and replastering the surface of the wall includi...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm thickness to be specified by the manufacturer of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivor...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engi...
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The graniteortraporbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Cod...
Providing and laying in Cement Concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The graniteortraporbasalt crushed graded coarse aggregates and fine ...
Providing and laying in Cement Concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The graniteortraporbasalt crushed graded coarse aggregates and fine ...
High Density Polyethylene Membrane water proofing Providing and laying water proofing treatment to the Rafts, Below grade slab, Lift pits, water retaining structures with fully bonded High Density Pol...
Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The graniteor...
Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The graniteor...
Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The graniteor...
waterproofing with Antimicrobial Coating Providing and Applying two component, water-based food grade epoxy resin coating on inside surface of Potable water tank having anti-algae, antifungal, Non-tox...
Dharwad district hospital-Electrical and fire works
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi ...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS mult...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc.,complete with all lead
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch ---- etc.,complete with all lead
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps 3way socket ---- etc.,complete with all lead
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator two module ---- etc.,complete with all lead
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 129316Amps one way switch ---- etc.,complete with all lead
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 32Amps DP switch ---- etc.,complete with all lead
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6/16Amps universal socket ---- etc.,complete with all lead
Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of R...
Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of R...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lightingorpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...
Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's s...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci...
Supplying of .....feet -PVC Batten with integrated LED tube .... W
with high quality diffuser with Life of 25000 burning hours & 70%
lumen maintenance with CRI 80. Power Input: 220-240V@
50/60Hz & Pow...
Supply of round/square recess/surface mounted rolling type
LED Down light with ...... W GU 10 LED Lamp Rib Fabricated
from diecast aluminium with white powder coated prewired to
mains connector & has ...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing
body for optimal thermal dissipation. Lamp compartment comprising of anti
glare clear diffuser with Injection moulded polyc...
Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc.,complete with all lead
Supplying capacitor type ceiling fan complete with down rodblades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball...
Supplying & Fixing of 70-150 Watts lamp holder 2 Pin ---- etc.,complete with all lead
Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire...
Fixing all types and all capacities of fluorescent or false ceiling or spot light or CFL or LED fittings indoor on the wall or ceiling or rafters or girders using 23or0.0076” twin twisted PVC insula...
Fixing a ceiling or Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessa...
Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary lengt...
Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w...
Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M...
Supply of round/square recess/surface mounted rolling type
LED Down light with ...... W GU 10 LED Lamp Rib Fabricated
from diecast aluminium with white powder coated prewired to
mains connector & has ...
Supplying and fixing regular MCB distribution boards on wallor wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's ...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ONorOFF, energy cross3 with Short ci...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ONorOFF, energy cross3 with Short ci...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
Supplying and running of GIorCopper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip ---- etc.,complete with all lead
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5...
Labour charges for laying of 1.1 KV class UG cable in
existing trench GI pipe / stoneware pipe / on wall / on pole
as required. 6 sqmm to 16 sqmm ---- etc.,complete with all lead
Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete. In soil ordinary ---- etc.,complete with all lead
Supplying of 1.1 KV UG cable having aluminium conductor PVC insulated, extruded inner sheathed, galvanized, steel strip except 2C x 10sq.mm wire armoured confirming to IS-3975:1990 NO. OF STRIP INDI...
Supply, installation, testing and commissioning of 500 kVA , 11kVor433V, 3 phase, 50 Hz, Delta star, DYn11 , outdoor, natually cooled, Oil Immersed copper double wound transformer Conforming to IS: 1...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...
Supplying and running of GIorCopper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip ---- etc.,complete with all lead
Supplying and running of GIorCopper strips for grounding connections, using necessary fixing materials as required. 40x6mm Copper strip ---- etc.,complete with all lead
Supplying and running of GIorCopper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm Copper plate ---- etc.,complete with all lead
Supply and Making of 11KV E Extruded "X" linked for tubing and moulded and crosslinked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations INDOOR and OUT...
Supply and Making of 11KV E Extruded "X" linked for tubing and moulded and crosslinked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations INDOOR and OUT...
11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND
WIRE ARMOURED as per IS7098 Part2 Armouring wires dia and Resistivity as per IS3975. 95 Sqmm, 54 GI Wires 2.5 mm Dia ---- et...
Providing and fixing G.I. chain link fabric fencing of required width in
mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts,
bolts and washers as required complete as per the dire...
Supplying, Installing, testing and commissioning approved make Centrifugal pump end suction type couple to Electric motor of suitable Hp, fitted on a common base frame and rated for Fire duty. The quo...
Supplying, Installing testing and commissioning of fire hydrant multi stage pump capable of delivering 1620 Lpmat 70.0m head coupled to water coiled diesel enginer of adequate. HP It shall be fitted w...
Supplying, Installing testing and commissioning electrically driven jockey pump of capacity 180.0 Lmpm at 75.0m head with all the necessary accessories viz. Pressure guages etc. operating on 3Ph 50Hz,...
Supply, erection, testing and commissioning of Fire Fighting panel cubicle
type made out of 14/16 Swg MS CRCA sheet which is derusted, degreased,
phosphated and passivated with angle iron skeleton or ...
Supplying, Installing testing and commissioning approved make Centrifugal pump end suction type coupled to Electric motor of suitable HP, fitted on a commonbase frame and rated for Fire duty. The quat...
Supplying, installing , testing and commissioning of PN16 CI butterfly valves
of confirming to IS 13039 with necessary nuts & bolts etc., complete ---- etc.,
complete as per specificaiton with all lea...
Supplying, installing , testing and commissioning of PN16 CI butterfly valves
of confirming to IS 13039 with necessary nuts & bolts etc., complete ---- etc.,
complete as per specificaiton with all lea...
Supplying, installing , testing and commissioning of PN16 CI butterfly valves
of confirming to IS 13039 with necessary nuts & bolts etc., complete ---- etc.,
complete as per specificaiton with all lea...
Supplying installing, testing and commissioning of PN16 CI "Non Return
Valve " confirming to IS 13039 with necessary bolts and nuts etc complete
includes cost of all materials labour charges with all ...
Supplying installing, testing and commissioning of PN16 CI "Non Return
Valve " confirming to IS 13039 with necessary bolts and nuts etc complete
includes cost of all materials labour charges with all ...
Supplying installing, testing and commissioning of PN16 CI "Non Return
Valve " confirming to IS 13039 with necessary bolts and nuts etc complete
includes cost of all materials labour charges with all ...
supply and installing testing and commissioning of CI " Y " stainer
confirming to IS standard with necessary bolts and nuts complete includes
cost of all materials labour charges with all lead lift lo...
supply and installing testing and commissioning of CI " Y " stainer
confirming to IS standard with necessary bolts and nuts complete includes
cost of all materials labour charges with all lead lift lo...
Supplying fixing and testing of Air cushions vessel. Fabricated out of 8mm
thik It is a 250 mm dia MS pipes (the ends should be dished) 1.2 M high
installed verically on suitable legs. Flange connecti...
Pressure guage of 150 mm dia including Isolation Valve and forged siphon
Tube including with all accssories as per IS:Spec. etc., complete as per
specificaiton with all lead and lift, loading unloadin...
Pressure Switch including Isolation Valve and forged siphon Tube including
with all accssories as per IS:Spec. ---- etc., complete as per specificaiton with
all lead and lift, loading unloading, labou...
FIREFIGHTING ELECTRICALSupply of the Following XLPE armoured cable 1100 V Grade with ISI mark stranded or solid, aluminimum conductor complete with crimping type Lugs and Glands etc completed.3.5 ...
FIREFIGHTING ELECTRICALSupply of the Following XLPE armoured cable 1100 V Grade with ISI mark stranded or solid, aluminimum conductor complete with crimping type Lugs and Glands etc completed.4.0 ...
Supplying and laying of 12 Core x 2.5Sqmm For Main Panel to DG ---- etc.,complete with all lead
Supplying and laying of 3 Core x 1.5Sqmm for Pressure Switch ---- etc.,complete with all lead
Supplying, installation, testing and commissioning of 12V ..AH
batteries in poly propylene container for D.G. sets. Low maintenance
batteries, plate type. (150 AH capacity) ---- etc.,complete with all...
Supplying and installing following size of perforated painted with powder cating m.s. cable trays with perforation not more than 17.5percent in convenient sections, joined with connectors, suspended f...
Supplying Installing, testing and commissioning of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia including cost of materials, labour, usage charges of machinery complete as per specifications. complete...
Supplying Installing, testing and commissioning of Gun metal BALL
VALVE SIZE OF 25mm dia including cost of materials, labour, usage
charges of machinery complete as per specifications. Complete ---- e...
Supplying Installing, testing and commissioning of Gun metal BALL
VALVE SIZE OF 19/20mm dia including cost of materials, labour, usage
charges of machinery complete as per specifications. Complete ---...
Supply, Installation testing and commissioning of approved make heavy tubes
(Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm
thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick...
Supply, Installation testing and commissioning of approved make heavy tubes
(Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm
thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick...
Supply, Installation testing and commissioning of approved make heavy tubes
(Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm
thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick...
Supply, Installation testing and commissioning of approved make heavy tubes
(Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm
thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick...
Supply, Installation testing and commissioning of approved make heavy tubes
(Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm
thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick...
Supply, Installation testing and commissioning of approved make heavy tubes
(Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm
thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick...
Supply, Installation testing and commissioning of approved make heavy tubes
(Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm
thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick...
Supply, Installation testing and commissioning of approved make heavy tubes
(Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm
thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick...
Wraping and Galing of UorG pipe line work includes one coat of anti corrossion paint (Black) and two coats of Bituminous cloth. including cost of materials, labour, usage charges of machinery complete...
Wraping and Galing of UorG pipe line work includes one coat of anti corrossion paint (Black) and two coats of Bituminous cloth. including cost of materials, labour, usage charges of machinery complete...
Supplying, installing , testing and commissioning of PN16 CI butterfly valves
of confirming to IS 13039 with necessary nuts & bolts etc., complete ---- etc.,
complete as per specificaiton with all lea...
Supplying, installing , testing and commissioning of PN16 CI butterfly valves
of confirming to IS 13039 with necessary nuts & bolts etc., complete ---- etc.,
complete as per specificaiton with all lea...
Providing and fixing Flow Switch in following sizes M.S. pipe including connnection etc as required.150mm dia ---- etc.,complete with all lead
Supplying Installing, testing and commissioning of hydraulically operated
sprinkler Gong Valve with water meter gong bell and trims as required,
pressure gauges drain Valve, ball Valves check valve, s...
Supplying Installing, testing and commissioning of 150mm dia 4 way Fire
brigade inlet connection with Non retrn valve of 4 nos. 63 mm dia.
including cost of materials, labour, usage charges of machin...
Supplying Installing, testing and commissioning of 100mm dia 2 way Fire
brigade inlet connection of 2 nos. 63 mm dia. including cost of materials,
labour, usage charges of machinery complete as per sp...
FIRE HYDRANT SYSTEMFIRE HYDRANT SYSTEM Supplying Installing, testing and commissioning
of 63mm mm dia single headed Gun mental Hydrant Valve with flanged
inlet, stop valve, spindle and cast iron hand ...
Supplying Installing, testing and commissioning of63mm mm dia double headed Gun mental Hydrant Valve with flanged inlet 2Nos, stop valve, spindle and cast iron hand wheel. It has a 2 Nos female insta...
Supplying Installing, testing and commissioning of Reinforced Rubber Lined 2nos .RRL Fire hose of 63mm dia 15m length as per IS 8423 binded with one set of male and Female lnstantainious Gun metal cou...
Supplying Installing, testing and commissioning of Gun metal Branch pipe size of 63mm dia x19mm dia as per IS 903 complete including cost of materials, labour,usage charges of machinery complete as pe...
Supplying Installing, testing and commissioning of Hose cabinet made out of 18 gauge M.S.sheet with double glass door with lacing arrangement and painted with two coats of Fire red Enamel paint at out...
Supplying Installing, of M.S. Pressed reel of 600mm dia swinging type motion which allows a 180 degree swing and conforms to IS:884or85 or Aluminium fitting Single Piece Compact Type. including cost o...
Supplying Installing, testing and commissioning of 19mm dia 40.0m length hose with rubber lining smooth bore, reinforced of naturalorsynthetic fibres, a rubber cover finish shall be smooth, fluted or ...
Supplying Installing, testing and commissioning of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia including cost of materials, labour, usage charges of machinery complete as per specifications. complete...
Providing of core cutting 50mm to 200mm dia Including all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convene of all material ...
Supplying Installing, testing and commissioning of, pendent
Type/Upright Type ,Standard Response Standard Coverage, Sprinkler,
K5.6(80),1/2”NPT, 68 Degree C, Chrome finish, UL listed. ---- etc.,comp...
Supplying Installing, testing and commissioning of Ceiling Mounted
powder coated Surface Finishing Mild Steel Rosette Plate including cost of
materials, labour, usage charges of machinery complete as ...
Supply, Erection, Testing and commissioning of MS Forged Tees and Collar etc., complete as per specificaiton with all lead and lift and as per directions of the Engineer-in-charge of the workSocket E...
Supply, Erection, Testing and commissioning of MS Forged Tees and Collar etc., complete as per specificaiton with all lead and lift and as per directions of the Engineer-in-charge of the workSocket T...
Supply, Erection, Testing and commissioning of MS Forged Tees and Collar etc., complete as per specificaiton with all lead and lift and as per directions of the Engineer-in-charge of the workSocket T...
Supply, Erection, Testing and commissioning of MS Forged Tees and Collar etc., complete as per specificaiton with all lead and lift and as per directions of the Engineer-in-charge of the workSocket T...
Supply, Erection, Testing and commissioning of MS Forged Tees and Collar etc., complete as per specificaiton with all lead and lift and as per directions of the Engineer-in-charge of the workSocket T...
Supply, Erection, Testing and commissioning of MS Forged Tees and Collar etc., complete as per specificaiton with all lead and lift and as per directions of the Engineer-in-charge of the workForged C...
CO2 2Kg Squeeze grip Providing 2 Kg C02 Gas Type Fire Extinugisher Squeeze grip type, used Unused Mechanism, Squeeze Grip, Gross Weight 9.1 Kg. empty Weight 7.1 Kg. Can Height 595MM Diameter 108MM, Di...
Supply, installation in position, testing and commissioning of 4.5Kg C0 Gas Type Fire Extinugisher, Trolley Mounted, 2 Easy Weight Management used Unused Mechanism, Squeeze Grip, Gross Weight 19.1 Kg....
Providing Aqueous Film-Forming Foam - 9 Ltr Providing 9 Ltr Fire Extinugisher Aqueous Film-Forming Foam Type, Stored Pressure Type, Pressure Gauge, Gross Weight 15.1Okg. empty weight 6.10kg Can Height...
Providing ABC Powder based MAP 50, 6Kg:-Providing 6kg Fire Extinguisher Mono Ammonium Phos phate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 9.5 Kg, empty weight 3.5 Kg, Can Height 4...
Providing Water Mist 4 Kg CO2 Gas Type Fire Extinguisher, used Unused Mechanism, Squeeze Grip , Gross Weight 9.1 Kg. empty Weight 7.1 Kg. Can Height 600MM Diameter 108MM, Discharge Time less than 8 Se...
Supplying of two bucket stand alongwith buckets. complete ---- etc.,complete with all lead
Providing's Escape Singage Photoluminescent rigid plastic, 2 mm thickness, Printed on High Quality glass paint with UV resistance, 5 years warranty, Material Used - Non Radiocactive, non-phosphorous, ...
Providing and Fixing Fire force board size of 3'x2' made out to Acrylic sheet
of 3mm thick and fixing with Stainless Steel finished studs etc. complete
including cost of materials, labour, usage charg...
Supply installation testing commissioning of P.A System Rack made out of 18 gauge M.S. Sheet with glass door with locking arrangement and powder coating grey paint two coats at inner and outer of box,...
Supplying Installing, testing and commissioning of P.A.System console panel with push button with speaker and indictoron Accomdated in M.S.Cabinet with painting 40 Zone cansole. Complete ---- etc.,co...
P.A.System amplifier 250W RMS out put with complete wiring and controls accessable form front ---- etc.,complete with all lead
Supplying Installing, testing and commissioning of MIKE suitable to
I.A.System. Complete ---- etc.,complete with all lead
Supplying Installing, testing and commissioning of Public address system (Two way comminication type) as per requirement of Fire Force authority and which Generally comprise of Supplying Installing, t...
Supplying and drawing of 2 Core X 1.5 Sqmm copper conductor armoured
cable ---- etc.,complete with all lead
Supply, install, test and commissioning of addressable peer to peer Networkable analogue addressable type fire alarm control panel with minimum 1500 Character or240X64 Pixel or 7inch Touchscreen graph...
Supply, intallation, testing and Commissioning of Graphical software for entire fire alarm panels including detector configuration, commissioning etc ---- etc.,complete with all lead
Supply, intallation, testing and Commissioning of Network card for fire alram panels integration ---- etc.,complete with all lead
Supply, Installation , Testing and Commissioning of Network Active Repeater Panel with 1500 Character or 240X64 Pixel or 7inch Touchscreen. The LCD shall Display all events or detectors, devices sta...
Supply, intallation, testing and Commissioning of loop card etc., complete with all lead and lift, as per specifications and as per directions of the Engineer in charge of the work. ---- etc.,complete...
Supply Installation testing and Commissioning of conventional type photoorHeat electric smoke sensor with flashing LED capable of woking at 9V to 33 V DC .The Optical Smoke Detector is unaffected by w...
SITC OF Fault isolation module:- Supply, Erection,Testing and Commissioning of UL-APPROVED Analog addressable fault isolator circuit modules of wall mounted type with mounting accessories. ---- etc.,c...
Supply, Installation, Testing & Commissioning of Analogue Addressable
loop powered Sounder & Beacon with inbuilt isolator and having Min 15
distinct sound patterns/ multitone to indicate Exit doors an...
Supply, install, test and commissioning of Analogue addressable Manual Call
Point (Resettable Type) with inbuilt isolator and LED indicator, designed
for IP44 requirements and approved to operate in 1...
Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cableorconduit entry as required with one coat of primer of approved make etc.100 x 75 x 65 mm ---- etc.,co...
Supply, install, test and commissioning of Analogue addressable Monitor Cum Control (InputorOutput) module (11) with inbuilt relay and isolator with LED indicator, approved to operate in 10C to 55C te...
SITC of 7AM-12 V Battery for fire alarm system ---- etc.,complete with all lead
Designs and preparation of drawings as per fire department norms ---- etc.,complete with all lead
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Kw4- Indent No.192 DH Dharwad.docx
Tender Document • 0.27 MB
Technical Specifications.docx
Instructions to Tenderers • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .