CONSTRUCTION OF BOUNDARY WALL AND ERECTION OF FENCING AND BOUNDARY PILLARS AROUND DEFENCE LAND MEASURING 22 ACRES IN MOHANLALGANJ CAMPING GROUND LUCKNOW UNDER THE MANAGEMENT OF DEO UNDER GE (P) LUCKNOW

Amount

Site clearance as cutting of vegitation/bushed/shrubs of any type Grubbing up tree trunk including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, and removing of debries to a distance n exc. 50 m complete all as specified and directed.

Surface dressing n exc 15 cm deep soft/loose soil complete all as specified.

Excavation in trenches n.exc 1.5 m in depth for foundation,. n.exc. 10 sqm on plan and n.exc 1.5 mtr in depth and getting out complete in soft/loose soil as directed

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,in soft/loose soil complete all as specified and directed.

Returning, filling in including spreading leveling, watering and well ramming in layers not exceeding 25cm in soft/loose soil as required and directed.

Removing excavated materials soil n.exc. 50mtr and depositing where directed at a level n.exc. 1.5 mtr above the starting point.

M & L for cement concrete type D2 1:4:8 (40mm graded aggregates) in foundation filling and mass concrete complete all as specified and directed.

M & L for cement concrete type C2 1:3:6 (40mm graded aggregates) in foundation filling and mass concrete complete all as specified and directed.

M & L for form works rough finished surfaces of concrete side of concrete foundation , footing , bases of coloumns raft and raft beams sides and sofits if any of foundation and plinth beams and similar work flat , vertical or to batter complete all as specified and directed.

M&L for form work to sides of pillar, posts, struts ,columns etc complete all as specified and directed.

M&L for form work to sides and soffits of beams lintel band and the like complete all as specified and directed.

S & F for MS TMT bars 10 mm dia and over , cut to length , bent to shape required incl cranking bending spirally for hooping for coloumn hooking ends and binding with and incl mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F for MS TMT bars 5mm to 10 mm dia and over , cut to length , bent to shape required incl cranking bending spirally for hooping for coloumn hooking ends and binding with and incl mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for Reinforced cement concrete M-25 design mix (using 20 mm graded stone agg) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete in foundation, footings, complete all as specified and directed.

M & L for Reinforced cement concrete M-25 design mix (using 20 mm graded stone agg) in columns, pillars, piers, posts and struts etc complete all as specified and directed.

M & L for Reinforced cement concrete M-25 design mix (using 20 mm graded stone agg) in beam cantilevers, bressummers, lintels over 1.5 m span etc complete all as specified and directed.

M & L for reinforced cement concrete type B-1, 1:(1.5):3 ( 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.

Ditto as item No 17 above but as in footings etc.

M & L for brick work using fly ash brick (old size) conforming to IS-12894:2002, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:4) , complete, all as specified and directed.

M & L for 10 mm thick rendering cement plastering on fair faces of brick work or concrete surfaces 1:4 and finished even and smooth (without using extra cement) complete all as specified and directed.

M & L for 15 mm thick rendering cement plastering on other than fair faces of brick work or concrete surfaces 1:4 and finished even and smooth (without using extra cement) complete all as specified and directed.

M & L preparation of new plaster surface and applying two coats of cement base paint over newly plastered wall surfaces including prepration of surface complete all as specified and directed.

Supply only 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors for fising to beep hole Etc

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing boltscomplete posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 all as specified and directed.

S&F 2.24 mm dia of wire Galvanised. 2 strand, steel barbed wire 2.0mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed. Note : Each line of wire shall be measured.

M &L for preparation of steel surfaces of any description over 10cm in width or girth not otherwirse described and two coat of synthetic enamel paint over one coat of red oxide complete all as specified and directed.

S & F mild steel screw bolts (machine made ) with hexagonal or square heads at one end, 10mm dia, not exc 10 cm long, bolt with waher and nuts complete all as specified and directed.

Supply of 3mm dia GI wire chain link fencing with 75x75mm mesh size and fixed to any type of strandard rails straining bolts etc including provision of binding wire complete all as specified and directed. Note: Weight constantant shall be detrmined by BOO of chain link fencing.

Fixing only chain link fencing including line wires, any mesh, size and type fixed to any type of standards rails, straining bolts, etc.including provission of binding wire complete all as specified and directed.

S & F of framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) andhanging; also fastening and fixing complete

M & L for red stone plate 0.20x0.20 m size with engraved writing complete all as specified and directed.

M & L for MS gate with RCC/Bk pillars 5 mtr wide complete all as per TD 551/Sh 1/1.

M/s Naresh Chand

M/s Reliable Electromech Systems

jayanti associates

Sanjay Traders