Construction of 72 Nos. of Firemen Quarters (Stilt plus 9 Floors) with development works at Coimbatore South Fire and Rescue Service Station Campus in Coimbatore City.

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.3: Earth work excavation in Soft disintegrated rock (including refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

1.5 : Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

1.8: Earth work excavation for Open foundation in in Soft disintegrated rock (excluding refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

7.2 : Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1 : Filling with Excavated Earth

21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3 : S&F of Magnetic door catches

25 : M.S.Holdfast

30 : Ellispattern

31 : Weathering couse

37.1 : White washing 3 coats (slaked)

39 : M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

46 : S & F 20 mm dia Alu. Hanger Rod

47 : S & F Alu Towel rail 75 cm long

48 : S & F 5 pin Coat stand

49 : S & F chromium plated 8 guage Picture Hook

50.4 : Providing Tree guard

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

c. 20 mm dia

d. 50 mm dia

52.1 : Supplying and fixing of 20mm dia "B" Class GI pipe for Hot water line (Fully Concealed in walls)

53.3 :C.I Steps (5kg)

Electrical arrangements 69 : 15 Amp. Power plug

72 : Box type Fibre Fan hook

74.Charges for fixing of "Fan"

76. 8 SWG wire

78. Earthing Station IS3043 (Type I)

86 : Anti termite treatment

ANNEXURE 2.1.1 : Supplying and filling with gravel (including tax collected by the Government)

2.1.3 : Filling sand (using crushed stone sand)

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

3.3.1: P.C.C. 1:8:16 using 20 mm broken brick jelly

3.8.2 : P.C.C. 1:3:6 using 40 mm HBSJ (using crushed stone sand)

6.2.1.1 : Brick work in C.M. 1:5 (F& B) using Fly ash bricks of size 230x110x70mm (using crushed stone sand) with admixture

8.2.1.1 : Standardised concrete Mix M25 Grade Concrete (using crushed stone sand) a) In Foundation and basement

8.3.1.1 : Standardised concrete Mix M30 Grade Concrete (using crushed stone sand) a) In Foundation and basement

b) In Ground/ Stilt Floor

c) In First Floor

d) In Second Floor

e) In Third Floor

f) In Fourth Floor

g) In Fifth Floor

h) In Sixth Floor

i) In Seventh Floor

j) In Eighth Floor

k) In Ninth Floor

l) In Tenth Floor

9.2.1.1 : Brick work in C.M. 1:6 using Fly ash bricks of size 230x110x70mm (using crushed stone sand) with Admixture a) In Stilt floor/Ground Floor

b) In First Floor

c) In Second floor

d) In Third floor

e) In Fourth floor

f) In Fifth Floor

g) In Sixth Floor

h) In Seventh Floor

i) In Eighth Floor

j) In Ninth Floor

k) In Tenth Floor

10.2.1.1 : Brick partition work in C.M. 1:4 using Fly ash bricks of size 230x110x70mm (using crushed stone sand) 110 mm tk (B.P.) with Admixture b) In stilt floor/Ground Floor

c) In First Floor

d) In Second floor

e) In Third floor

f) In Fourth floor

g) In Fifth Floor

h) In Sixth Floor

i) In Seventh Floor

j) In Eighth Floor

k) In Ninth Floor

l) In Tenth Floor

11.2.1.1 : Brick Partition work in C.M. 1:4 using Fly ash bricks of size 230x110x70mm (using crushed stone sand) 70 mm tk (B.P.) with Admixture a. In Stilt / Ground floor

b) In First Floor

c) In Second floor

d) In Third floor

e) In Fourth floor

f) In Fifth Floor

g) In Sixth Floor

h) In Seventh Floor

i) In Eighth Floor

j) In Ninth Floor

12.1.1 : Brick partition in C.M. 1:4 using country bricks of size 22 x11x5cm 50 mm thick (using crushed stone sand) with Admixture a. In Ground floor

b. In First floor

c. In Second floor

d. In Third floor

e) In Fourth floor

f) In Fifth Floor

g) In Sixth Floor

h) In Seventh Floor

i) In Eighth Floor

j) In Ninth Floor

k) In Tenth Floor

15.1. Cuddappa slab 20 mm tk for cupboard (using crushed stone sand) a) In Ground Floor

b. In First floor

c. In Second floor

d. In Third floor

e) In Fourth floor

f) In Fifth Floor

g) In Sixth Floor

h) In Seventh Floor

i) In Eighth Floor

j) In Ninth Floor

15.2. Cuddappa slab 40 mm tk for cupboard (using crushed stone sand) a.Ground Floor

b. In First floor

c. In Second floor

d. In Third floor

e. In Fourth floor

f. In Fifth Floor

g. In Sixth Floor

h. In Seventh Floor

i. In Eighth Floor

j. In Ninth Floor

16.1.1 : Precast jally ventilator 50mm thick using standardised concrete mix M20 (using crushed stone sand) a. In Ground floor

b. In First floor

c. In Second floor

d. In Third floor

e) In Fourth floor

f) In Fifth Floor

g) In Sixth Floor

h) In Seventh Floor

i) In Eighth Floor

j) In Ninth Floor

k) In Tenth Floor

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

d. Vertical walls

f. Curved surface

21.5.5.1 : Supplying and fixing of Single Leaf solid core flush door shutter of thickness 35mm b) door size 900 mm x 2100mm (Single Leaf)

23.1 : TW styles & rails with 9mm thick BWR single leaf shutters with brass screws size of b. 750x2100 mm

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand)

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand) in C.M 1:2, 10mm tk

29.9.1 :Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).(using crushed stone sand)

32.1.1 : Finshing the top of Terrace floor with Pressed tiles (23cmx23cmx20mm) mixed with Water proofing compound (using crushed stone sand)

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) Mixed with Super Plasticiser

34.1: Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) Mixed with Super Plasticiser

35.1.1 : Plastering 1:3, 12mm with WPC (using crushed stone sand)

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand)

36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk (using crushed stone sand) including Super plasticizer a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.7 : Providing two coats of Plastic Emulsion PAINT including primer for inner walls

38.7.1 :Providing two coats of Exterior Emulsion PAINT including primer for outer walls

43.1 : Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.1 : Rain water harvesting using defunct borewell and providing perforated cover slab (M 25) a). Providing pit

b) Augering 30cm dia

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.3.1 : Supply and planting avenue trees (using crushed stone sand)

50.5.1 :Supplying. Fabricating and erection of M.S Scheme Name board

52.4 : Supplying, laying, fixing and jointing the following PVC pipes as per ASTM c)20mm ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI specials

53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight)

53.5.2 : Wash Hand Basin of size 550 x 400 mm (without pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.1.1 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - G.F. (using crushed stone sand)

56.4.1.1 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - Other than G.F. (using crushed stone sand)

57.1.1. : S & F of E.W.C (White) 500mm with "P" or "S" TRAP (using crushed stone sand) with double flapped seat & seat cover

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4 : Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

59.2.1 : Gully Trap using Chamber bricks of size 23x11x7.5cm (using crushed stone sand)

60.1 : PVC Nahani trap (4way/2way) (using crushed stone sand)

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.

66.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

98.3.2 : TW panelled single door shutter (with brass fittings) a. 1000 x 2100mm. (Single leaf) for Qtrs

112.1 : S & F of Exhaust Fan 225mm dia

344.2 : S&F of Bevelled edge mirror 500 x 400 x 5.5mm

361 : Concrete Designer Tiles flooring (using crushed stone sand)

361.5.1.2 : Supply and Laying of Stain Free Nano Polish Vitrified Tiles 600 x 600 x 8mm Flooring in C.M 1:3 20mm Thick incl. pointing (using crushed stone sand)

379.4.2.2 : S & F of Granite Slabs (Super Fine Polished with Machine Cut Edges) of sizes 4'x2' and above 18mm to 20mm thick (Jet black) in CM 1:3, 20mm thick. (using crushed stone sand) a) In Ground floor

b) In First floor

c) In Second floor

d) In Third floor

e) In Fourth floor

f) In Fifth Floor

g) In Sixth Floor

h) In Seventh Floor

i) In Eighth Floor

j) In Ninth Floor

383.4 : Providing full round nosing to the edges of granite slab of 18 to 20 mm thick

383.4.2 : S&F of Stainless Steel sink 600 x 450 x 200mm

Annexure II A1:Supply and Laying Rubber Moulded Hyraulic Pressed Paver Block 63 mm thick including labour charges for laying etc

A2: PVC Trims (Beading)

A3: Supplying and applying of two coat of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothly with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing.

A4: Providing one coat of Wallputty for new plastered surface

A5:Supply & Fixing of Qute WPC solid door frame extruded with size 75mm x 50mm. The inner core made of rigid WPC compound with minimum shore hardness of 55, and Bulk Density 800 Grms / Cub.Mt.. The frame shall be fixed onto the wall using 8 x 100mm long M.S fastener Screw fitted with polymeric nylon sleeve.

A6: Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

A7: Supplying and fixing in position of UPVC window of casement type( open) for all sizes

A8: Supply and installation of two-track sliding uPVC windows shall utilize uPVC profile sections with an outer wall thickness of 2.30mm (±0.2mm), featuring an outer frame of 60mm x 52mm, a shutter of 66mm x 42mm x 50mm, an interlock of 45mm x 36mm, and a glazing bead of 24.5mm x 16mm.

A9: Drilling of 150mm dia vertical bores in hardrock formation to any required depth using "DTH Rig" as directed by the departmental officers including labour charges for incerting casing pipe and etc., a) up to 150m below G.L

b) up to 180m below G.L

c) up to 210m below G.L

A10: Reaming 140/150 mm dia pilot bore to 300mm dia bore for the following depth as directed by the departmental Officer. i) From 0 m upto 60 m Depth ending from ground level

ii) From 60 m depth and upto 90 mt depth ending below ground level

iii) From 90 m upto 120 mt depth ending below ground level

iv) From 120 m upto 150 mt depth ending below ground level

v) From 150 m upto 180 mt depth ending below ground level

vi) From 180 m upto 210 mt depth ending below ground level

A11: Supply and delivery of 150mm ribbed screen pipes as per IS 12818 /1992 of approved quality for borewells

A12: Labour Charges for inserting PVC Casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC Couplers with Cement paste etc., complete. i) 150 mm dia Casing Pipes assembly

A13: Supply and fixing of PVC 160mm dia top end cap of approved make

A14: Supply and delivery of 12 to 20mm Nylon Rope for Bore-well including cost of materials and labour charges etc., complete as directed by the departmental officers.

A15: Supply and fixing of 150mm dia MS Clampset

A16 :Supply and delivery of clear water vertical wet type Three phase submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. For following duty condition: Duty 50lpm X 175 m

A17: Supply and delivery of Three phase Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. For following duty condition: Duty: 75lpm X 150 m

A18: Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth i) upto 5HP

ii) upto 7.5 HP

A19: THREE PHASE PANEL BOARD- D.O.L WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, i) for 5HP

A20:THREE PHASE PANEL BOARD STAR- DELTA WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of Star-Delta starter confirming to IS 13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/ Three Phase/50HZ (+/- 5%) and 415V (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 Nos., i) for 7.5HP

A21: Supply and delivery of PVC INSULATED AND SHEATHED 3 CORE 4 Sqmm FLAT TYPE COPPER CABLE CONFORMING TO IS 694/1990 AND AS AMENDED THEREAFTER

A22: Supply and delivery of following dia UPVC column pipe in to the borewell a) 40mm dia

A23: Supply, laying and jointing the following UPVC pipes in below Ground level a) 50mm Dia

b) 65mm Dia

A24: Supply, fixing and jointing the following UPVC pipes in above Ground level a) 40mm Dia

A25: Supply, laying and jointing the following GI pipes in below Ground level a) 25mm Dia

b) 100mm Dia

A26: Supply,fixing and jointing the following GI pipes in above Ground level a) 25mm Dia

b) 50mm Dia

c) 65mm Dia

A27: Supplying and delivery of following dia of G.I specials a) 65mm dia GM Non-Return valve

b)65mm dia GM Gate valve

A28: Supply and delivery of 300mm dia RCC Hume Pipe

A29:Supply and fixing of SS Swan Neck Tap including cost of material, cost of labour charges for fixing etc.,

A30: Supply and fixing of 32 mm dia PVC waste pipe with coupling including cost of material, cost of labour charges for fixing etc.,

A31:Supply and fixing of CP two way Bib cock with health facet including cost of material, cost of labour charges for fixing etc.,

A32: Supply and fixing of CP Shower Arm with Overhead Shower Rose including cost of material, cost of labour charges for fixing etc.,

A33: Supply and fixing of CP Angle cock tap including cost of material, cost of labour charges for fixing etc.,

A34: Supply and delivery of SFRC manhole cover with frame with locking arrangement to the site a. 600mm x 600mm

b. 900mm x 900mm

A35: Supply and fixing of 9 watt LED bulb

A36:Supply and fixing of 4' 18 watt LED Tube Light

A37: Supply and fixing of Bulk Head fitting suitable for 12W LED Bulb

A38: Supply and fixing of 12 watts LED bulb

A39: Supply and fixing of 18W LED 3000K Square Type Recessed Fitting with LED

A40: Supply and fixing of 100 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with Earth connection only

A41: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.(Open wiring)

A42: Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (open wiring)

A43: Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB as incoming and 12 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only.

A44: Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection

A45:Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

A46 :Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

A47: Plate earthing with copper plate of size 600 x 600 x 3 mm as per the ISI specification with an earth electrode of 2.1 mtr class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

A48: Supply and fixing of Tamil Stainless Steel TNPHC 15" height including cost of all materials and all labour charges etc complete

A49: Supply and fixing of Tamil Brass Letters 25cm including cost of all materials and all labour charges etc complete

A50: Supply and fixing of Aluminium Diecast Letters 9'' size including cost of all materials and all labour charges etc complete

A51: Supply and fixing of Aluminium Diecast Letters 6'' size including cost of all materials and all labour charges etc complete

A52: Supply and fixing of 20"x5" size plastic foam name plate

A53: Design, Supply, Delivery, Installation,Testing, and Commissioning of Passenger Lift (Brand: Johnson / Kone / OTIS or equivalent) of capacity 20 Persons with 10 Floors / 10 Stops / STAINLESS STEEL (1.5 mm) Car Cabin as per the following specifications Three phase EB power supply should be get from the TNEB for installation and testing etc for completion of work.

A54: Annual Maintance Charges for lift For First One Year (Free) For Second Year @ 5% of the Contract Value

A55: Design, Supply, Delivery, Installation,Testing, and Commissioning of Passenger Lift (Brand: Johnson / Kone / OTIS or equivalent) of capacity 16 Persons with 10 Floors / 10 Stops / STAINLESS STEEL (1.5 mm) Car Cabin as per the following specifications Three phase EB power supply should be get from the TNEB for installation and testing etc for completion of work.

A56: Annual Maintance Charges for lift For First One Year (Free) For Second Year @ 5% of the Contract Value

A57: Supply, installation, testing and commissioning of 100KVA Diesel Generator set complete with all accessories as per standared specifications with AMF Panel

A58: Supply and laying of 3 1/2 x 185 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

A59: Supplying and fixing Cable Gland suitable for 31/2 core 185 sq.mm. UG Cable

A60: Supply and laying of 4 core 10 sq.mm. armoured copper cable for power wiring to the Terrace Pump Motor with runs of 14 SWG TC wire for earthing, providing in wall with suitable size GI clamps, screws, wooden plug, end termination by using suitable size cable glands, copper sockets and etc

A61: Supplying and fixing Cable Gland suitable for 4 core 10 sq.mm. UG Cable

A62: Supply and delivery of following MCB ISOLATORS a) 4 Pole 63A MCB ISOLATORS

A63: Supply and delivery of following MINIATURE CIRCUIT BREAKERS 240 V / 415V 50HZ - AC SUPPLY SUITABLE FOR BOTH LIGHTING AND MOTOR CIRCUITS a)Double Pole 6A to 32A, 10KA

A64:Supply of Advanced Lightning Rod with Stainless Steel body, working on the principle of (ESE) Advanced Early Streamer Emission technology, having a coverage radius of 107 mts when mounted at a height of 5 mts giving protection

A65: Supply of standard mounting structure of 5m height along with base plate

A66: Supplying and laying of Copper cables of 70 Sq. mm cross section insulated Copper Cable for lightning current dissipation to the earthing system with necessary Fixing Clamp, Connector accessories etc. Down conductor should be in single length from the terminal to the ground. Joints are not allowed in the down conductor. Copper lug termination should be fixed at both ends

A67: Supply of SPARK SAFE EARTHING ELECTRODE-Long life Maintenance Free Chemical earthing electrode made with copper bonded rod of 17.2 mm Dia and length of the electrode 2 meters. The electrode will be installed along with 25 Kgs of BFC, highly conductive and low resistance ground resistance improvement powder tested to the resistivity of 0.2 ohms as per IEC 62561-7 read with ASTM G57-06, CI 3.4

A68: Installation charges for ESE Lighting Rod with all accessories as detailed below • Installation of Mounting Structure • Installation of Lightning Rod • Laying of Down conductor • Installation of Counter • Installation of Earth Electrodes • Termination of down conductor

A69: Supplying and fixing of AVAITION LIGHT-LED, HOLDER, DOWN CONDUCTOR and INSTALLATION CHARGES

A70: Supply and fixing of rubber round column guard of size 550mm height x 75mm (two corners each 75mm ) x 10 mm thick on the existing R.C.C Columns corner surface in stilt area with reflective stickers, including cost of all materials, labour charges for fixing in position including necessary fixtures etc

SRP CONSTRUCTION COMPANY (BID ID -1502083)

S S Natarajan & Co (BID ID -1502417)

SRI RAMANA BUILDING CONSTRUCTIONS PRIVATE LIMITED (BID ID -1500619)

JOHNSUN ENGINEERING CONTRACTORS (BID ID -1490554)

PTM PROJECTS PVT LTD (BID ID -1502427)

chendur construction company (BID ID -1501780)