Additional alteration to ATTIC floor in the science Block building converted into District Ayurvedic Hospital Building at Nahan Distt. Sirmour SH Providing E.I therein

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. FRLS PVC insulated copper conducto single core cable etc. as required.

Group-C

Supplying and fixing suitable G.I. with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable G.I. with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

2x1.5 sq.mm + 1x1.5 sq.mm earth wire

2x 4 sq.mm + 1x 4 sq.mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

4x 4 sq.mm + 2x 4 sq.mm earth wire

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including, providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required: of Approved Make

Ceiling Fan 1200 mm sweep

Ceiling Fan 1400 mm sweep

Providing and installation exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: of Approved Make

Exhaust Fan, Light duty, (Domestic) 300 mm sweep

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing Higher Rating (80 to 125A) 240/415 volts,10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

MCB DP 50/63 A 'C' curve

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 KA, " C’ curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing following way. single pole and neutral, sheet steel, MCB distribution board, 240V on surface/recess, complete with tinned copper bus bar, neutral bus bar, learth bar, din bar, inter connections, powder painted including earthing etc.as required.( But without MCB/RCCB/Isolator)

12 way , Double door

8 way , Double door

Providing and installation of following type of LED batten with aluminium housing, anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clamps,connections, testing etc. as required: of Approved Make

LED Batten Light 20W

LED Batten Light 10W

Providing and installation of following type of surface mounting square/round type LED panel Light with aluminium die cast housing in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing etc. as required:of Approved Make

Square/round LED Panel Light 10/12W Surface

Square/round LED Panel Light 15W Surface

Square/round LED Panel Light 18/20W Surface

Supplying and fixing PVC batten/ angle holder including connections etc. as

Providing and installation of following type of LED retrofit lamp B-22 holder base with polycarbonate body and aluminium heat sink; suitable for input voltage: AC 220-240 V, 50/60Hz, including mounting in existing fixture, testing etc. as required complete in all respects. LED retrofit lamp 7 W Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/ 6 amps switch.

3 pin 5/6 A socket outlet

P/F openable sheet metal shutter suitable for exhaust fan size 300mm as required complete in all respect.

Providing & fixing 45 W LED street light fitting consist of Pressure die-cast aluminium IP66 roadway luminaire with high power LED as light source with acrylic cover for Nominal Voltage (V) 240 V, Suitable for pole dia Ø 43 mm (max.) Make:Havells, Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.

Supplying and erection of street light bracket made of G.I.pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required

32 mm dia. G.I. pipe, heavy class

kuldeep singh