Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹57.3 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹58.8 L+₹39,935 (0.68%)Rejected-Finance 385 GROUND FLOOR GANESH MURTI NAGAR CAPTAIN PRAKASH PETHE MARG BACKBAY BUS DEPOT CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L2 | Rejected-Finance Other than being lowest | |
| 3 | L3₹61.2 L+₹2.8 L (4.77%)Rejected-Finance | L3 | Rejected-Finance Other than being lowest | |
| 4 | L4₹64.9 L+₹6.6 L (11.3%)Rejected-Finance SHOP NO 10 BMC SHOPPING CENTRE MITHA NAGAR GOREGAON WEST MUMBAI 400 104 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400104 | L4 | Rejected-Finance Other than being lowest | |
| 5 | L5₹65.7 L+₹7.3 L (12.5%)Rejected-Finance B 13 ROOM NO 2 2 SHIVA PALM BEACH SOCIETY SECTOR4 NERUL WEST NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L5 | Rejected-Finance Other than being lowest |
Tender Value
Refer Docs
EMD Value
₹1.7 L
Closing Date
23 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
REPAIR MAINT TO IRON/SS GRATING, PLATES, RAILING, CHAIN ETC AT BOMBAY DOCK AND DUNCAN DOCK AND OTHER CONNECTED AREA AT ND MBI UNDER GE (NW) KUNJALI COLABA MUMBAI
2023_MES_623927_1
8566/CWE (NW) Mumbai/E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) Kunjali
Class C
Category a(i)
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) Kunjali
₹1.7 L
Yes
29 Jan 2024
18 Oct 2023
27 Nov 2023
18 Oct 2023
23 Nov 2023
9 Nov 2023
18 Oct 2023 - 7 Nov 2023
Amount
Dismantling wrought or mild steel work of any description complete all as specified and directed by Engr-in-charge.
Supply and Fixing rolled mild steel Section of grade Fe 410-W (Gde-E-250) quality-A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; (angle cleats or other) fixed with connecting plates including bending, welding etc complete all as specified and directed by Engr-in-charge.
Supply and fixing rolled mild steel section of Grade Fe 410-W, (Gde- E-250) quality-A, as in Plates (Plain or Chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed by Engr-in-charge.
Taking down cement plaster on bricks/surfaces built in cement mortar including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed by Engr-in-charge.
Material and Labour for 10mm dia and over mild steel TMT bars, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed by Engr-in-charge.
Material and Labour for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge
Material and Labour for preparation of old steel surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge
Material and Labour for Stainless steel ladder, railings, plate, chain etc in staircase, landing etc. complete with and including necessary welding, buffing/ polishing and fixing complete all as specified and directed by Engineer-in-Charge. Design for stairs/ladders or any others will be as approved by GE. Grade of steel shall be grade 316.
Material and Labour for Stainless steel decorative railings alloy grade 316 having 8mm minimum thicknesss (Design and pattern as approved) as used to connect two Stainless Steel post with hooks etc complete with and including necessary welding, buffing/ polishing and fixing complete all as directed by Engr-in-charge.
Demolition of plain cement concrete of any description and in any position not other wise specifically provided, complete all as specified and directed by Engr-in-charge.
Material and labour for microconcrete of Fosroc, Dr Fixit, or equivalent around edges of Dock walls, jetties, corners, grooves, alters, steps, piers and other marine structure after complete cleaning of concrete surface and applying epoxy coat as bonding agent Fosroc's Nitobond or equivalent for bonding between old and new surface, including all lifts, shuttering all as required as per site condition and directed by Engineer-in-Charge.
Material and Labour for brushing neat cement slurry with 3 Kg of cement per Sqm complete all as specified and directed by Engineer-in-Charge
Material and Labour 150mm thick PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregates as in floor finishing the cement concrete surface even and smooth using extra cement complete all as specified and directed by Engineer-in-Charge.
Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for complete all as specified and directed by Engr-in-charge.
Material and labour for ready mix cement concrete in Pavement/Hard standing (PQC) M-40 mixed with (admixture, synthetic & fibre) in field using minimum 400 Kg of cement per cubic metre laid in bays or as directed with and including steel formwork to sides of concrete spread, compacted and finished in a continuous operation etc complete all as specified and directed by Engineer-in-Charge
Material and Labour for form work to sides of pillars, posts, struts, columns, rough finished surface of concrete square, rectangular or polygonal complete all as specified and directed by Engr-in-charge.
Material and Labour for erection & dismantling of MS tubular double scaffolding (H frame) upto height of 30m & with necessary bracing, provision of necessary safety equipment to the skilled workers to carry out the work and covering with green cloths for carring out external face work of walls complete all as specified and directed by Engr-in-charge.
Material and Labour for cleaning the surface of the stone/concrete in jetty , dock,retaining wall, piers of jetty and bottom portion of deck slab etc above sea with mechanical grinder and specialized water misting techniques applying water jet using a fine nozzle sprinkling system calibrated to spray a fine mist along the stone/concrete surface complete and removing all sea vegetation complete all as specified and directed by Engineer in charge. Note:- Quoted rate shall be inclusive of scaffolding or alternative way of carrying out the work with proper safety instruction required at site.
Material and labour for applying two coat of solvent free Epoxy primer coat on oil/damp wall using with composition of UR Tech CG 2752 and UR Set CG 1054 in the ratio 100:60 Parts by weight Epoxy Primer to be homogeneous mixed, achieved by using a mechanical stirrer machine with agitator blades or alternatively a drill machine with a paddle stirrer. Primer will be applied at coverage of 3 to 4 Sqm per kilograms per coat of Epoxy primer, thickness of each coat shall be 120-150 microns complete complete all as specified and directed by Engineer-in-Charge Note:- Quoted rate shall be inclusive of scaffolding or alternative way of carrying out the work with proper safety instruction required at site.
Material and labour for applying two coats of anti carbonation paint DEKGUARD S of FOSROC or equivalent over vertical concrete surface in jetty/dry dock above sea level complete all as specified and directed by Engineer in charge. Note:- Quoted rate shall be inclusive of scaffolding or alternative way of carrying out the work with proper safety instruction required at site.
Material and Labour for taking down, chipping and removing the loose, spilt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing 20mm thick polymer plaster (1:5:15, cement, sand, polymer) and finally finishing the surface complete all as specified and directed by Engineer-in-Charge Make :- Dr.Fixit/Sunanda/Chemestik/Fosrok as aprooved by GE. Note :- (New reinforcement and MS Sections will be measured and paid separately)
Material and Labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally covering with Microconcrete and finally finishing the surface complete all as specified and directed by Engineer-in-Charge Make :- Dr. Fixit/Sunanda/Chemestik/Fosroc as approved by GE. Note :- (New reinforcement and MS Sections, microconcrete and form work if required will be measured and paid separately)
Supply only ready mix microconcrete mixture complete all as specified and directed by Engr-in-charge. Make : Dr.Fixit/Sunanda/chemestik/Fosroc as approved by GE
Dismantling timber scantlings 40 sq. cm and over in section, in any position in unframed work complete all as specified and directed by Engr-in-charge.
Supply and Fixing 1st class hardwood (TEAK WOOD) Plain, solid, straight, rebated on the solid, rounded or chamfered segmental supplied and fixed (size of wooden planks ( 3000 mm x 300 mm x 200 mm) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 1st class hardwood (TEAK WOOD) Plain, solid, straight, rebated on the solid, rounded or chamfered segmental supplied and fixed (size of wooden planks ( 1000 mm x 300 mm x 200 mm) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 1st class hardwood (TEAK WOOD) Plain, solid, straight, rebated on the solid, rounded or chamfered segmental supplied and fixed (size of wooden planks ( 500 mm x 300 mm x 200 mm) complete all as specified and directed by Engineer-in-Charge
Material and labour for Precast RCC (1:2:4) type B 1 using 20mm graded crushed stone aggregate as in cover slabs and set in cement mortar 1:4, complete all as specified and directed by Engineer-in-Charge (Reinforcement shall be measured complete all as specified and directed by Engineer-in-Charge
Cleaning of covered drains of sectional area exc 0.24 Sqm but n.exc 1 Sqm by using suitable device for removing blockage of line, mud, silt and other debris and removal of obtained spoils out MoD land, including taking precautionary and safety measures etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing structural steel framed works such as angle, channel, grating, gate, ladder etc. Confirming to Fe-290, E-165 as in supporting structure of duct, drain edge etc including making good the disturbed portion of concrete surfaces with 1:2:4 type B0 (using 12.5mm graded stone aggregate) complete all as specified and directed by Engineer-in-Charge
Material and Labour for complete removal of existing treatment on wall surfaces and applying a coat of wall care putty 3mm thick on plastered surfaces, preparatory to distempering and applying two coats of oil bond distemper over a coat of wall primer complete all as specified and directed by Engr-in-charge.
Material and Labour for rendering 5mm thick in CM 1:3 on fair faces of brick work or concrete surfaces in ceiling finishing the surface even smooth complete all as specified and directed by Engineer-in-Charge
Material and Labour for preparation of newly plastered surfaces in ceiling, applying three coats of white wash complete all as specified and directed by Engineer-in-Charge
Material and Labour for plastering in CM 1:4, 20mm thick in two coats (15mm under coat plus 5mm finishing coat) using Pidiproof LW+water proofing chemical of Dr. Fixit or equivalent as per manufacturer''s instruction and finishing the surface seven and fair. (Water proofing Chemical shall be measured and paid seperately) complete all as specified and directed by Engr-in-charge.
Material and Labour for preparation of newly plastered or un plastered wall surfaces, over 10cm girth applying two coats of 100% acrylic, weather resistant emulson over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction
Material and Labour for complete removal of existing plastered wall surface, over 10cm girth preparation of surfaces, applying two coats of 100% acrylic, weather resistant emulson over a coat of exterior wall primer complete all as specified and directed by Engr-in-charge.
Removing debris exc 1.50 Km but n exc 20 Km and depositing where directed, in soil outside MoD land complete all as specified and directed by Engr-in-charge.
MADHU ENTERPRIZES
jalandhara construction
Shree Ayyappa Engineering
Anil Industrial Corporation
m/s ashoka enterprises
Nexus Infratech
SHREE JAGDISH FURNITURE CO.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .