SPL REPAIRS TO SECURITY WALL AT RWA13 RWA 14 AND RWA 16 AND ADDN ALTN TO BLDG NO P32 OF NCSR UNDER GE SOUTH UDHAMPUR

Amount

Demolition of brick or stone masonary including all necessary arches, pillars, quions etc built in cement mortar, complete all as specified and directed by Engr In charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed by Engr In charge.

Dismantling old unserviceable barbed wire/ fencing wire mesh including removing from site, complete all as specified and directed by Engr In charge.

Demolition of cement concrete un reinforced of any description and in any position not otherwise specially provided for, complete all as specified and directed by Engr In charge.

Demolition of reinforced cement concrete work of any description not specifically provided incl cutting down reinforcement , complete all as specified and directed by Engr In charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each and removing to store , complete all as specified and directed by Engr In charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4 sqm each and removing, complete all as specified and directed by Engr In charge.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing, complete all as specified and directed by Engr In charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out soft /loose soil, complete all as specified and directed by Engr In charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out soft /disintgrated rock , complete all as specified and directed by Engr In charge.

M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) in foundation, complete all as specified and directed by Engr In charge.

Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter fair finished flat surfaces of concrete, complete all as specified and directed by Engr In charge.

Formwork to faces of walls,retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter fair finished flat surfaces of concrete, complete all as specified and directed by Engr In charge.

Formwork to pillars, coloumn and simiar work etc fair finished surfaces square, retangular and polygon, complete all as specified and directed by Engr In charge.

Formwork for fair finished to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. , complete all as specified and directed by Engr In charge.

Reinforced cement concrete M-25 (Design mix) (20 mm graded aggregate) using footing, foundation beams, plinth beam, roof beam, lintel band, retaining wall/toe wall and similar work etc , complete all as specified and directed by Engr In charge.

Reinforced cement concrete M-25 (Design mix) (20 mm graded aggregate) using columns, pillars and similar work etc. , complete all as specified and directed by Engr In charge.

Reinforced cement concrete M-25 (Design mix) (20 mm graded aggregate) using beam, cantilevers, bressummers, lintels and similar work , complete all as specified and directed by Engr In charge.

Reinforced cement concrete M-25 (Design mix) (20 mm graded aggregate) using Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses etc , complete all as specified and directed by Engr In charge.

M & L mild steel TMT bars 10 mm dia and over cut to lenth, bent to shape required, including cranking,bending, spirally for hooping for columns, hooking ends and binding waith and including mild steel wire (annealed) not less than 0.9mm dia , complete all as specified and directed by Engr In charge.

Ditto as per item here in before but 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders , complete all as specified and directed by Engr In charge.

Taking down cement plastering on brick/concrete walls incl taking out joints hacking for key scrubbing down with water etc., complete all as specified and directed by Engr In charge.

M&L for brick work with sub class 'B' brick straight or curved on plan exc 6m radious in CM 1:6 as in brick work/brick pillars etc , complete all as specified and directed by Engr In charge.

M&L for stone masonry randum rubble un-coursed well bounded bedded and solidly hearted in CM 1:6 , complete all as specified and directed by Engr In charge.

Precast PCC 1:3:6, type C-1 (using 20mm graded stone aggregates) as in bond stones, set in CM 1:6 with match the joints, complete all as specified and directed by Engr In charge..

M & L for providing cement concrete 1:2:4 Type B1 using 20mm graded aggregate as in lintels up to 1.5m clear span, cills,seismic and other similar bands, plinth courses, copings, Bed blocks, and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed by Engr In charge.

M&L 15 mm thick rendering on fair faces of brick or concrete surfaces in CM 1:4 and finishing the surfaces even and smooth without using extra cement , complete all as specified and directed by Engr In charge.directed.

M&L for raised pointing to random or polygonal rubble masonary coursed or un coursed in CM (1:3) , complete all as specified and directed by Engr In charge.

M&L for prepration of newly wall surfaces and applying two coats of cement base paint over a coat alkali resistance with curing properly, complete all as specified and directed by Engr In charge.

M & L for hand packing (any thickness) of broken stone or boulder at back of walls over arches etc and raising (or lowering) to the required level, complete all as specified and directed by Engr In charge.

S & F 110 mm dia PVC (SWR) pipes single stack in any length as in weepholes of retaining wall, complete all as specified and directed by Engr In charge.

M & L for mild steel conforming to grade Fe-165 (Fe-290) angle post or struts in fencing fixed independently including cutting and bending to shape as directed drilling holes, notching for wire etc. , complete all as specified and directed by Engr In charge.

S&F for framed work such as grills, gratings & door etc.with ends of bars shouldered and/or riveted,or forged into spikes;walk ways; railings; and similar work conforming to Fe 290 Gde-E-165 , complete all as specified and directed by Engr In charge.

Material and labour preparation of new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide chrome primer , complete all as specified and directed by Engr In charge.

Returning filling in incl spreading, levelling, watering and well ramming in layers n.exc 25cm thick as in soil/rock (excavated material) , complete all as specified and directed by Engr In charge.

Removing excavated material as in soil/rock n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point , complete all as specified and directed by Engr In charge.

S & F for galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of post including securing and tying at crossing with and provision of galvanised mild steel wire staple or steel pins etc all as specified and directed.(Each line wire to be mesured), , complete all as specified and directed by Engr In charge.

S & F for concertina coil 500mm dia and 150mm prolong fixing to any type of standard rails including screwing in position , complete all as specified and directed by Engr In charge.

M & L for non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed by Engr In charge.

M & L for Glazed Coloured Ceramic tiles in vertical surface 300x450x7mm or 300x600x7mm thick laid over 10 mm thick screed bed in CM 1:4, set and joint in neat cement slurry and pointed in white or colour cement to match , complete all as specified and directed by Engr-In-charge.

Form work to soffit of suspended slabs such as roof slabs, floor slabs, landings and similar work, n exc 200mm thick (horizontal or sloping), complete all as specified and directed by Engr-In-charge.

M & L for digital glossy finished double charged Vitrified tiles light Shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed by Engr-In-charge.

M & L for digital glossy finished double charged Vitrified tiles light Shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in vertical surfaces as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed in CM 1:4, complete all as specified and directed by Engr-In-charge.

M&L for Dura stone heavy duty vitrified tiles of size n exc 0.36 Sqm of 8-10mm thick as in floors set and jointed in neat cement slurry and pointed in white cement to match the surface , complete all as specified and directed by Engr-In-charge.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed by Engr-In-charge.

Granite stone 18-20mm thick (table rubbed and polished) in window cills, cooking platforms and the like not less than 1 Sqm (in one piece), laid over 15mm thick layer of cement mortar 1:3 after roughening of existing concrete surface and applying a layer of neat cement slurry @ 3Kg/Sqm including pointing in white cement 1:2 using marble dust with admixture of pigments to match with shade of stone, including demolition of stone slabs and tiles of any description or thickness in floors etc. laid, bedded and pointed in any mortar , complete all as specified and directed by Engr-In-charge.

S&F PVC moulded door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing, complete all as specified and directed by Engr-In-charge.

S & F factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing , complete all as specified and directed by Engr-In-charge.

S & F 150mm long aluminium, anodized, barrel tower bolts of extruded section , complete all as specified and directed by Engr-In-charge.

S&F butt hinge 100mm size, medium weight, cold rolled mild steel, complete all as specified and directed by Engr-In-charge.

S & F 150mm aluminium handles, cast type, anodised , complete all as specified and directed by Engr-In-charge.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each

Supply and fixing factory made uPVC white/coloured fixed glazed window/ventilator/Partition walls made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).

M & L for sheet glass 5.5mm thick of one side view, ordinary quality and glazing with beads fixed with metal panel pins, EPDM washers or connected accessories exc 0.5 sqm in each pane, complete all as specified and directed by Engr-In-charge.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, , complete all as specified and directed by Engr-In-charge.

S&F 4 mm dia galvanised steel wire 50 mm x 50 mm mesh made up in to matresses or cages to water tank etc , complete all as specified and directed by Engr-In-charge.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bar aluminium section weighing 0.55 kg/m including necessary joining cleat , glazing clips, rubber packing , anodised aluminium snap beading screws , anodised aluminium fitting such as peg stays 150mm long (1 no) hinges type B-12 100mm long (2 no ) suitable handle (1 no) etc, complete all as specified and directed by Engr-In-charge.

M&L for Modular Kitchen cupboard/almirah in required size at site made out 18 mm thick one side decorative lamination sheet/sunmica consisting of carcass 18/20 mm thick PVC sheet & provn of shutters made out of 18mm thick one side decoartive laminated PVC sheet/Sumica all required brackets SS screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edbes shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent finish, necessary drawer, openable shelve with frame work complete as per make and specification mention as per drawing with locking arragement approved by Engr-in-Charge (Make: Rajshree/Sintex or equivalent)

S&F PVC steel catcher of superior quality , complete all as specified and directed by Engr-In-charge.

Supply only Stainless steel basket (plain), SS plate basket(11-13 division), SS partition basket, SS Cutlery basket, SS grid basket of size as per manufacturer/ as directed by Engr in Charge made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved, complete all as specified and directed by Engr-In-charge. make Make: Life style Cat part No WA/POB/15204 or equivalent approved

S & F Hetich softcloser hinges of stainless steel premium quality , complete all as specified and directed by Engr-In-charge.

Fancy type Brass handles 100mm size fixed with screws, complete all as specified and directed by Engr-In-charge.

S & F 30 mm width of flap Continous (Piano) hinges, mild steel, bright finish or electro galvanised, complete all as specified and directed by Engr-In-charge.

S&F 20mm dia mild steel powder coated fancy type tubular curtain rail with brackets and end bulb as per reqirement, complete all as specified and directed by Engr-In-charge.

M & L for roughing surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc for local depressions RCC surface and brushing neat cement slurry with 3.0 Kg of cement per Sqm and will be finished and rendered with 10mm thick cement plaster in Cement Mortor 1:3 using water proofing compound and finished even and smooth without using extra cement and the sand used for the same will be clean and free from any silt, organic matter and impurities, RCC and plastered surface will be wet cured for minimum period laid down in IS 456 & then allowed to dry and leakage checked by pointed test at least 72 hrs. After checking of leakages on dry plaster surfaces, complete all as specified and directed by Engr-In-charge.

M & L for apply bituminous primer confiriming to IS -3384 @ 0.40 Kgs/ Sqm on prepared surface on sunny day. After the primed surface has dried and apply a coat of hot blown 85/25 penetration grade blown bitumen, confirming to IS -702@ 1.20kg/ Sqm on the surfaces. Provide APP (Atactiic Polypropylene) modified polymeric five layered membrane with central core of 100 micron high molecular high density firm. Minimum weight of membrance will be 3 kg/Sqm. APP membrance will be laid across the slope from lowest line sloping roof towards ridge with minimum end lap of 150 mm & side lap of 75mm bonded with hot blown bitumen. Over the APP membrance apply semi hot blown 85/25 penetration grade bitumen @ 1.20kg/ Sqm and blinded with fine sand in dry condition @ 0.50 kg/Sqm dusted over the bitumen coat , complete all as specified and directed by Engr-In-charge. Note :- The laying of the membrane shall be got done by authorized applicator of the membrane manufacturer.

Providing and laying water proofing treatment to sunken portion of WCs, bathrooms, etc by applying first layer of slurry of cement @ 0.488kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.253kg/sqm this layer allowed to air cure for 4 hrs then applying slurry of cement @ 0.242 kg/sqm mixed with acrylic based polymer modified cementitious composite compound @0.126kg/sqm and allowed to aircure for 4 hrs and joints seal with sealing compound as approved by GE. Note: (i) Before laying of lime concrete joints of trap/WC/Soil pipes shall be properly sealed with sealing compound of Roofex/Forre/FOSROC and provn of P or S trap & Nahani /Floor traps with long arm, complete all as specified and directed by Engr-In-charge.

Water proofing treatment to surfaces of walls/concrete slabs damaged due to moisture and efflorescence including sunken areas of bathrooms/toilets, in balconies by applying acrylic polymer modified cementitious high performance coating or treatment all as per manufacturer's instructions, complete all as specified and directed by Engr-In-charge. (Make : SmartCare Damp Block 2K/Dr. Fixit

M & L Rendering 10 mm thick on brick or concrete surfaces of walls in CM (1:6) including finishing the surfaces fair and even without using extra cement , complete all as specified and directed by Engr-In-charge.

M & L for rendering 5mm thick in cement plaster 1:3 on fair faces of brick work or concrete surfaces as on ceiling c, complete all as specified and directed by Engr-In-charge.

S & F in repair 15mm bore bib tap of cast copper alloy fency type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule , complete all as specified and directed by Engr-In-charge.

S & F in repair 15mm bore stop valve/angle cock, cast copper alloy fency type screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed by Engr-In-charge.

S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed by Engr-In-charge.

S&F in repair Soap dish holder incl all fittings , complete all as specified and directed by Engr-In-charge.

S & F in repair 125mm chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union , complete all as specified and directed by Engr-In-charge.

S&F in repair countertope vitreous chinaware wash hand basin (WHB) white size 550mm x 400mm complete including provision of pair of mild steel angle iron brackets of suitable size duly painted, 32 mm dia chromium plated waste coupling, PVC waste pipe and cutting for pinning in ends of brackets in wall etc , complete all as specified and directed by Engr-In-charge.

S&F health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe, complete all as specified and directed by Engr-In-charge.

S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, , complete all as specified and directed by Engr-In-charge.

S & F in repair Vitreous china squatting pan 'Orissa' pattern size 580x440 mm white with integral foot rest including connection to trap and flushing pipe , complete all as specified and directed by Engr-In-charge.

S&F in repairs for Vitreous china wash down water closet Pan (pedestal pattern) white including seat cover complete all as specified

S&F in repairs 10 litres capacity PVC low level flushing cistern white inlet float valve, handle complete including brackets, complete all as specified and directed by Engr-In-charge.

S&F PVC connection 15 mm dia and 600mm long with two Nos of brass check nuts and washers, complete all as specified and directed by Engr-In-charge.

M&L for vitreous china urinal half stall type white incl waste pipe fixed in repairs , complete all as specified and directed by Engr-In-charge.directed.

S&F in repair concussive push button taps of cast copper alloy, screwed for iron pipe and fixed, complete all as specified and directed by Engr-In-charge.

S & F 15mm steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls including taking down old pipe , complete all as specified and directed by Engr-In-charge.

S & F 20mm steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls including taking down old pipe, complete all as specified and directed by Engr-In-charge.

S & F 25mm bore steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls, 15mm bore including taking down old pipe, complete all as specified and directed by Engr-In-charge.

M & L for 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I and PTMT ball valve 20mm dia including taking down of old tank and removing from site , complete all as specified and directed by Engr-In-charge.

S & F in repair of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends for iron pipe of size 20mm bore, complete all as specified and directed by Engr-In-charge.

S&F 110 mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall or laid in floor/trenches , complete all as specified and directed by Engr-In-charge.

S&F 110 mm PVC (SWR) bends any redius with access door, complete all as specified and directed by Engr-In-charge.

S&F 110 mm PVC (SWR) branch piece, (singal T) equal or unequal with access door, complete all as specified and directed by Engr-In-charge.

S&F PVC (SWR) Floor trap, 75 mm dia of outlet, plain with grating including jointing with solvent cement and making good , complete all as specified and directed by Engr-In-charge.

S&F 600 mm long tubular tower rail brass chromium plated 20mm dia, D type 60cm long fixed with two plugs (Gutties) of 2nd class hard wood embeded in cement mortor 1:3 with MS screws, complete all as specified and directed by Engr-In-charge.

M & L for applying 1 mm thick layer of wall putty on walls to give uniform surface, surface scrubed with emery paper and make surface good and clean , complete all as specified and directed by Engr-In-charge.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed by Engr-In-charge.

M & L for preparation of new plaster surfaces of walls and applying two coats of oil emulsion distemper (white/tinted) , complete all as specified and directed by Engr-In-charge.

Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete including fitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,terminal boxes etc removing materials for taking credit and making good disturbed surfaces of walls floors and ceiling , complete all as specified and directed by Engr-In-charge.

Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLSH copper conductor cables (multistranded) PVC insulated and unsheathed in and including PVC concealed conduit pipe as per site requirement (size not less than 20 mm dia), medium grade with Modular sunken boxes & PVC/metal back plate for mounting modular type switches, sockets & regulators etc with cover plate modular type including supplying and laying PVC insulated and stranded unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire connected to earth dolly including cutting of chases in wall/ceiling etc and making good the disturbed surfaces match to existing with cement mortar and putty white /colour wash , complete all as specified and directed by Engr-In-charge. Make: Havells/ Finolex/ Polycab.

All as per srl item No 101 but for 3/5 pin 6 Amps socket outlet independent board including PVC insulated PVC unsheathed 2.5 sq mm earth wire and connected to earth dolly, complete all as specified and directed by Engr-In-charge.

All as per srl item No 101 but for 3/5 pin 6 Amps socket outlet on the same board including PVC insulated PVC unsheathed 2.5 sq mm earth wire and connected to earth dolly, complete all as specified and directed by Engr-In-charge.

All as per Srl item No 101 but for 3/5 Pin 16 Amps socket outlet independent board with cable 4.00 Sq mm including copper PVC insulated PVC unsheathed 4.00 sq mm earth wire standard and connected to earth dolly, complete all as specified and directed by Engr-In-charge.

All as per Item No. 101 But for one light point control by two nos two way switches with other Independent Board 1.5 sqmm PVC insulated unsheathed FRLSH copper conductor single core multi stranded flexible cable and 1.5 sqmm PVC insulated unsheathed FRLSH copper conductor as earth lead , complete all as specified and directed by Engr-In-charge. .

S&F for modular switch 6 Amps single pole two way 230 V, 50 Hz, AC , with outer cover , complete all as specified and directed by Engr-In-charge. Make:Legrand/Havells crabtree/L &T

S&F for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with outer strip complete all as specified and directed by Engr In charge. Make:Legrand/Havells crabtree/L &T

S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with outer strip complete all as specified and directed by Engr In charge. Make:Legrand/Havells crabtree/L &T

S&F for modular socket 3/5 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and directed by Engr In charge. Make:Legrand/Havells crabtree/L &T

S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover complete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T

S & F modular Bell push flush type 6 amp 230 V, 50 Hz, AC , with outer/inner cover , complete all as specified and directed by Engr-In-charge.. Make:Legrand/Havells crabtree/L &T

S & F calling Bell ding dong 230 volts single pole 50Hz , complete all as specified and directed by Engr-In-charge. Make: Anchor Roma/ Legrand/ Indo Asian .

M &L Ceiling rose, surface bakelite 65x 50mm three terminals fixed on PVC Round Block complete all as specified and directed by Engr In charge.

S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit /casing capping 25 mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead all as specified. Including taking down old sub main wire, complete all as specified and directed by Engr-In-charge. Make: Havells / Finolex / Polycab.

S&F Sheet metal enclosure double door type for DBs (when MCB to be used) 8 way 240 volts with Suitable rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification c, complete all as specified and directed by Engr-In-charge. Make: Schneider/ Legrand/L&T

S & F MCB Single pole and neutral 240 volt any rating from 40 amps"C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable , complete all as specified and directed by Engr-In-charge. Make: Schneider/ Legrand/L&T

S & F of MCB single pole 240 volt any rating from 10 to 40 amps 'C' series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable , complete all as specified and directed by Engr-In-charge. Make: Schneider/ Legrand/L&T

S & F Exhaust fan made of sturdy Engineering plastic body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 225mm , complete all as specified and directed by Engr-In-charge. Make:Havells/Bajaj/CG.

Supply and fix electric water heater, storage type plastic body with stailness steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV,connection piece etc. , complete all as specified and directed by Engr-In-charge. Make-Bajaj/CG/Racold

Supply and fixing LED spot /track light fitting 12/15 watt movable type for focus the wall /picture IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with light fixtures driver,holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size. complete all as specified and directed by Engineer-in-Charge. Make: Philips /Bajaj/Havells/Syska

S & F LED Decorative, STYLO wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LeD lamp B22 base.with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size , complete all as specified and directed by Engr-In-charge. Make: Philips /Bajaj/Havells/Syska

S & F in repairs LED decorative down light fitting/recess mounted round type white/ warm white with high out put diffuser 12 watt 220 V AC with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size , complete all as specified and directed by Engr-In-charge. Make: Philips /Bajaj/Havells/Syska

Supply and fixing in repairs LED lights fitting 1x 20W, 230V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose , complete all as specified and directed by Engr-In-charge. Make: Philips /Bajaj/Havells/Syska

S & F in repairs LED wall mounting mirror type white/ warm white pitcture light fitting with high out put diffuser 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size , complete all as specified and directed by Engr-In-charge. Make: Philips /Bajaj/Havells/Syska

Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection , complete all as specified and directed by Engr-In-charge. Make: Philips /Bajaj/Havells/Syska

paras ram pachiala (BID ID -3337218)

khajuria builders (BID ID -3330063)

jyoti parkash sharma (BID ID -3339224)

M/S SUSHEEL KUMAR Govt. CONTRACTOR (BID ID -3334724)

vijay constrction co (BID ID -3330727)

VIRINDER SINGH (BID ID -3325788)

JOGINDER SINGH (BID ID -3331022)

M/S Ashok Kumar Jaswal (BID ID -3329214)

M/S ASHOK KUMAR PACHIALA (BID ID -3330688)

M/S ANUJ KUMAR (BID ID -3339135)