REPAIR TO EXTERNAL UTILITY AND OTHER MISC WORKS IN THE AOR OF AGE B/R-III UNDER GE 874 EWS.

Amount

Dewatering/pumping/bailing out contaminated with waste material sludge from septic tank along with inlet outlet chamber of any capacity/depth by vehicle mounted sewage suction machine and disposing same out of cantonment area including taking off manhole covers and putting back the same after cleaning/ removing the liquid waste material of septic tanks and cutting holes through slab/ wall where required for inserting pipe and making good the same with cement mortar to match with existing surfaces to make hygienically fit, writing the date of cleaning of septic tank with black and white paint of size 150 x 200mm and finally spraying unslaked lime (bleaching powder), dry, around and over the septic tank complete all as specified & directed. Note:- 1. Qty of liquid sludge shall be measured for payment under this item. 2. Arrangement of Land for the disposal of waste is complete responsibility of contractor. 3. Arrangement of suction machine is responsibility of contractor.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified & directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified & directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified & directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars & precast concrete masonry etc complete all as specified & directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in Cement mortal 1:6 complete all as specified & directed.

Taking down cement or cement lime plaster, of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified & directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

M&L 2nd class soft wood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints chamfered both sides fixed to frame work with secret nailed as in wall panelling 15mm including cornice and beading as required and applying two coat of melamine polish including sanding/filler repair /sealer coat complete all as specified and directed. Note-: Frame work shall be measured and paid separately.

M&L plywood grade BWR type BB, 6mm thick fixed with nails to timber frame work in ceiling /wall complete all as specified & directed.

Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified & directed.

M&L for preparation of previously treated surfaces/old surface of wall and applying one coat cement base paint on old surface of wall complete all as specified & directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement-base paint over a coat of primer complete all as specified and directed.

M&L for 15mm thick cement plaster on external surface in CM 1:4 mixed with WPC 3% by weight of cement including finishing fair & even complete all as specified and directed. Note: Cost of WPC is included in the quoted rates.

M&L for 15mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for providing and fixing in repair concertina coil fencing with punched tape concertina coil 600 mm dia 10m openable length ( total length 90m) having 50 Nos rounds per 6 m length, up to 3.0m height of wall with existing angle iron Y shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tired with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of engineer in charge, with reinforced barbed wire tape (R.B.T)/spring core (2.5 mm thick) wire of high tensile strength of 165kg/sq.mm with tape (0.52 mm thick and weight 43.478 gm/metre) complete all as specified and directed. Note: Cost of M.S. angle, CC Blocks shall be paid separately.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. and in any mortar complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

M&L for 75mm thick plain cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as sub base floor complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L Hardcore of gauge (broken bricks) n exc 63mm deposited spread levelled in layers n exc 15 cm thick watered and rammed to a true surface with gauze broken boulder exc 90 cm complete all as specified and directed.

M&L second class softwood as in scantling clean sawn fixed in position with nails, unframed work complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

M&L for preparation of new steel surface of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for mild steel framed work for such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe. 290.Gde-E-165 including ornamental and intricate design and portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc complete all as specified and directed.

S&F mild steel angle iron fixed independently without connecting plates complete as in fencing post or struts/ 'Y' section incl cutting shape as directed, drilling holes, welding notching wire including embedding in concrete and screwing conforming to Fe-290 Gde E-165 etc complete all as specified and directed.

MS RJ BUILDERS (BID ID -3173511)

MS AKHLAQ ENTERPRISES (BID ID -3171744)

AAKASH CONTRACTORS (BID ID -3170834)

patriotic builders (BID ID -3171971)

M/S MYL CONSTRUCTION COMPANY (BID ID -3171076)

M/S MUNEER AHMAD WANI CONSTRUCTIONS (BID ID -3168733)

M/S S. D. BUILDERS (BID ID -3176817)

Bidder Name

M/S S. D. BUILDERS

patriotic builders

RATHER BROTHERS

AAKASH CONTRACTORS

M/S MUNEER AHMAD WANI CONSTRUCTIONS

M/S MYL CONSTRUCTION COMPANY

MS RJ BUILDERS

MS AKHLAQ ENTERPRISES