Augmentation of Water Supply Scheme Dhun Dhai Wala (MH-PC) Block Chohla Sahib, District Tarn Taran. (Under NABARD XXIII Project)

Amount

Boring with casing pipe for tubewell in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the tubewellis lowered & tested, equipment as required such as hand boring machine and its accessory,transportationto site and vice versa etc. complete in all respect.

Boring with 250mm id Housing Pipe 0 to 150 m

Supplying, lowering of MS Pipe as per IS: 4270-2001 including MS sockets having dimensions as per IS code duly welded with MS electrode to have extra strength to lower the pipe into tubewell bore.

200 mm nominal diameter (weight 41.6 kg per meter) 8 mm thickness

Supplying, lowering of Stainless Steel Cage type wire wound screen as per IS: 8110-2000 or latest ISI marked Duly welded with suitable grade S.S welding electrode to lower the strainer into tubewell bore.

200 mm internal diameter (slot size 0.15mm) 6.30 mm thickness

Supplying, Lowering & fixing of M.S. special socket to connect S.S. Strainer to M.S. Pipe duly welded with suitable grade welding electrode complete in all respect.

200 mm internal diameter

Supplying, Lowering & fixing of stainless steel socket as per IS 8110-2000 or latest ISI marked duly welded with suitable grade SS welding electrode to lower the strainer into T/Well bore complete in all respect.

Supplying at site Wooden box of suitable size with Lid & locking arrangment for preserving strata sample collected from the bore.

Collection of water sample from different strata and testing of sample from approved laboratory (Physical & chemical Analysis)

Supplying and fixing M.S well cap having thread to fix on housing pipe complete in all respect

200 mm internal diameter

Supplying & fixing of bail plug of M.S. pipe complete with inverted U-hook attached to the bottom plug complete in all respect.

200mm internal diameter (weight 41.6 kg per meter) 8.00 mm thickness

Supplying & fixing of M.S. Clamp of size 200mm x 12mm made out of MS Flat 1.52 m long, suitable to fit Housing pipe including the cost Nut & Bolts of Suitable size complete in all respect.

Development of stabillizing of the tubewell with air compressor of required capacity as directed by the engineer-in-charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.

Capacity of Air compressor 300 cfm at 250 PSI

Development of stabillizing of the tubewell with submersible pump of required capacity as directed by the engineer-in-charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.

Testing of water sample for Heavy metal from approved laboratory (Toxic material such as Arsenic, lead, mercury, pesticide etc.)

Renovation of OHSR 100 KL

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).

150mm i/d Sluice Valves flanged

Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B- Class,premium make such as (Jindal Hisar) including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.

Supplying,fixing and testing at site Automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible / monoblock to be fixed on existing panel for OHSRs complete in all respects.

Plugging all leakages in existing RCC OHSR including necessary material e.g cement, sand Dr Fixit etc. with pressure gun & cleanig of Existing OHSR Complete in all respect.

Cement For Removal of seepage from tank

Dr Fixel for inside Water Tank

Scaffolding with Labour

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications

110mm o/d pipe of 10 Kg/cm2 lines laid complete

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge)

Providing, Fixing & jointing Cast Iron Surface box for Sluice Valve, Air Valve, Fire hydrant etc. including all carriages complete @ 3Kg Each (3x1kg = 3kg)

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department size 0.9m x 0.9m including carriage.

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (Manually) (6kgf/cm2) (excavation & including specials)

PVC pipe 63mm o/d

PVC pipe 90mm o/d

PVC pipe 160mm o/d

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (Mechnically) (6kgf/cm2) (excavation & including specials)

PVC pipe 63mm o/d

PVC pipe 90mm o/d

PVC pipe 110mm o/d

PVC pipe 160mm o/d

Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting.

PVC pipe 63mm o/d

PVC pipe 90mm o/d

Dismentalling of Mettaled roads and back filling with excavated earth and fully compacted only

PVC pipe 63mm o/d

PVC pipe 90mm o/d

PVC pipe 110mm o/d

PVC pipe 160mm o/d

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge)

Providing fixing and jointing ISI Marked Gunmental peet valve(Heavy Petern) as per IS 778 with Hand Wheels On G.I pipe line laid in the ground or inside building including all carriages complete.50mm Id Gunmetal peet vave (Heavy petern)

50mm i/d Gun mental Peet Valve(Heavy Petern)

Providing, Fixing & jointing Cast Iron Surface box for Sluice Valve, Air Valve, Fire hydrant etc. including all carriages complete 04 No.

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department 11 No. With each of Size 0.6m x 0.6m (including carriage)

Providing proposed water connection to household up to Wall with providing, laying, jointing, testing GI pipe lines 15 mm i/d = 2.50 mtr. , B-Class as per CSR 28.36 (A) , (Above ground level) , Providing & fixing MDPE pipe 15 mm i/d with specials 2.00 mtr. (Below GL), including cost of special such as tees, bends, sockets, elbow, peet valve, union, nipples and hocks etc, cutting, threading and testing in trenches in the ground and ISI 15 mm i/d GM ferrule as per IS" 262 and 3" i/d clamp with C..I. bib cock, 15 mm i/d as per IS " 210 with stainless steel spindle of approved make as per CSR 30.65 (b)

Renovation of Pump Chamber.

Terracing consisting of tiles 2.86cm×11.43cum×3.83cm laid over25mm mud plaster, 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65Kg. Per Sqm on top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc. (Including Carriage.)

Congolmerate floor 40mm thick cement concrete 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand filling. ( Using Mechanical Mixer for Mixing of matirial ) ( Including Carriage.)

Conglomerate floor 50mm thick cement concrete rate 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand filling.( Including Carriage.)

Hollock wood doors shutter windows including Hinges, Screws, Chocks Cleats, Stops and Cords etc. complete fixed in position (double Leaf) @ Paneled glazed or glazed and paneled

Hollock wood cup board shutter with plywood panels or faced on both side fixed in position (excluding the cost of handles, bolts hasp with staple but including the labour for fixing them)

Kiln seasonal Hollock wood cup board chowkats including iron hold fasts, iron hinges corner straps, wooden knobs or handles fixed in position (Size 45 x 60mm).

Applying Pink Primer or-aluminium priming coat including preparation of surface With special quality paint

Painting two coats excluding priming coat with ready mixed paint in all shades on new wood work With special quality paint Qty. as per item No. 21

Providing and fixing 110 mm dia SWR U.P.V.C Rain water pipe (ring fitted type-A) as per IS:13592 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-incharge. (If fixed on wall face clamp to be paid separatly as per respective item)

Applying priming coat with methal primer on new steel or iron work incluing preparation of surface and Painting two coats with ready mixed paint for metallic surfaces in all shades on steel or iron work with special quality paint.

Providing and fixing 110 mm dia SWR U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.

Providing and fixing 110 mm dia SWR U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.

White washing 3 coats inside of pump chamber, Qty. as per Sr. No. 18

Finishing wall with exterior decorative cement based paint such as snowcem robbiacem etc. on new work in two coats to give even shade. (Qyt. as per Sr. No. 17 Marked “C”)

Providing and fixing of Glass strips 4mm thick in floors

50mm wide

40mm wide

Distempering with dry distemper of approved manufacture two coats over one priming coat to give an even shade. Qty as per sr No.36

Supplying & fixing glass panes including special metal sash putty of approved make.

Providing and fixing of ceiling fan of reputed make such as Crompton or equivalent

Providing and fixing of electric tube set of reputed make

Providing & Installing Testing & Commissioning of One No. Electrically driven Submersible Pumping set of reputed Make capable of delivering 450 LPM against a head of 76 mtr along with electric panel board consisting of electric appliances such as automatic Star Delta Push Button or oil immersed Starter, Main Switch, VM, Ampere Meter, ELCB, Shunt Capacitor, Single Phase preventer, Indicating Lamps, Kit-Kat etc. including M.S. Column Pipe of suitable size 80 mm =50 mtr (in 3 mtr lengths each with flanges , screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable (reputed make) complete in all respects as per standard Specifications.

Cost of pumping set

Cost of lowering (with length)

Cost of submersible cable (with length)

Cost of pannel board

C.I FITTING INSIDE PUMP CHAMBER Providing and installing 110mm dia delivery main (From Tube well to Duck Foot bend including cost of C.I/D.F Pipes, D/F Sluice valves, D/F NRV & Specials as C.I Bends, Tail Piece Tees etc.. inside the pump chamber as per standard design complete in all respects

Providing & Installing Testing & Commissioning of One No. Electrically driven diaphragm opreated metering system chemical dosing chlorinator suitable for for delivering 0.5 to 6 liters of Bleaching Powder solution/ Sodium Hypo solution per hour under maximum delivery pressure upto 7 Kg/cm2 and suction left not less than 1.5 mtr., as per DWSS standard specifations.

Development of Water Works

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects as per standard Drawing . (including carriage)

Providing & fixing PCC fencing Poles with 6 Hieght, 3"x3" Top & 4"x3" Base provided with 3 Nos. Hooks complete in all respects.

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing . (including carriage)

Construction of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing . (including carriage)

Construction of masonry gate pillar including cost of MS Steel Gate size 1.22mtr x 1.37 mtr as per standard Drawing complete in all respects (including carriage)

Construction of Cement Concrete, Foot Path with masonry toe wall & earth filling inside water works as per standard Drawing . (including carriage)

Providing & fixing MS Sign Board as per standard size of DWSS as per Drawing (including carriage)

Environmental

Making lawns including ploughing & dragging with 'Sohaga' breaking of clods, removal of earth rubbish dressing & Supplying doob grass roots and planting at 15 cm. apart including Supplying and spreading of farm yard manure@ 0.18 cum per 100 sqm & loosening.

Supplying and Planting prmanent trees including digging of eirth pits size 75x75x75 cm deep refilling the excavated eirth with manure supplyed @0.113cum each and watring supplying through tractor tanker(trees like Neem, Ashoka, Dake, arjun etc.)

Planting ground cover plants including digging and refilling of beds with excavated soil and FYM, Fertilizer and insecticides, planting of saplings at 30cm distance from plant to plant and row to row, providing and fixing brick tiles edging.

Planting, flower beds including digging and refilling of beds with excavated soil and FYM, fertilizer and insecticides, plating of sapling at 30cm distance from plant to plat and row to row.

Provision for one way stand post with khura complete in all recpect.

Tajinder Singh Govt. Contractor