SPL REPAIR TO RATION STORE AND QM STORE AT BLDG NO T 9 AND 10 OF CCSR, PROVN OF TWO WHEELER PARKING SHED AT CCPU, PROVN OF STATIC WATER TANK AT FURNITURE YARD AND PROVN OF DEFI WATER STORAGE HEATER AT OFFRS MD ACCN UNDER GE (WEST) LUCKNOW

Amount

Excavating in post holes (or similar holes) each n.exc. 0.5 cum getting out, returning, filling in, and ramming earth or broken rubble mixed with earth around in layer n.exc. 25 cm including watering and removing surplus soil to a distance n. exc 50m and making good surface in soft/ loose soil complete all as specified and directed.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.

Excavating over areas, n.exc 1.5m deep and getting out in soft/ loose soil complete all as specified and directed.

Excavating over areas, exc 1.5m but n.exc 3.0m deep and getting out in soft/ loose soil complete all as specified and directed.

Returning, filling in, trenches including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft/ loose soil complete all as specified and directed.

Removing surplus excavated material soils n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Removing surplus excavated material soils exc. 250m but n.exc. 500m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

M&L post construction ATT for treating along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron complete all as specified and directed.

M&L post construction ATT for treating of soil under existing floors using chemical emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 course sand) to match the existing floors complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge not exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L Cement Concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in walls any thickness, size or shape including pillasters, buttresses, columns, pillars, boundary pillars and posts (including caps and bases) including necessary formwork complete all as specified and directed.

M&L Mild Steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Mild Steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Mild Steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L RCC M-25 (Design mix) using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basements slabs, under reamed piles and mass concrete and similar works complete all as specified and directed.

M&L RCC M-25 (Design mix) using 20mm graded stone aggregate as in walls, retaining walls, basement walls, ballast walls and the like, any thickness, above top of footings, including attached pilasters and buttresses and similar works complete all as specified and directed.

Use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc. and similar work, vertical or to batter for rough finished surface complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F false ceiling with 4mm thick 'E' Board (Make: Everest) of size 600x600mm, white, prelaminated sheet embossed reinforced designer ceiling board tiles of approved texture and powder coated, hot dipped GI imposed grid frame work complete all as specified and directed including all necessary drilling, cutting to fix electrical items as under with the following:- (a) 24x24x0.45mm thick powder coated GI angle plugged @ 600mm c/c along perimeter of wall. (b) 24x32x0.33mm thick powder coated GI tee as main and cross runners suspended with 4mm dia GI wire suspenders with adjustable clamps and dash free fastners with rawl plug and screws plugging in RCC slab etc. placed @ 600mm c/c from perimeter of wall. (c) Fixing of 4mm thick 'E' board tiles and finished complete with one coat of oil emulsion distemper on ceiling. NOTE: The complete ceiling work shall be executed as per manufacturer's instructions and as directed.

Dismantling of single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed.

S&F multi-rib TM profile, tensile strength 550 Mpa, colour coated 0.50mm thick pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet, having maximum pitch of 250mm c/c and minimum 30mm crest depth in length as per site requirement, the feed material manufactured out of 0.50mm (TCT) with coating of 18-20 microns top coat over 5 microns primer and 8-10mm alkaline back of zinc aluminium alloy of AZ-150, including the sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium 55% and silicon 1.5% with total mass coating of 150 gms/sqm on both sides having covered width 1020mm and return leg for proper side lap as in roof covering/ cladding and fixed with self tapping screws with EDPM seal complete all as specified and directed. Make: TATA Durashine or equivalent as approved.

S&F multi-rib TM profile, tensile strength 550 Mpa, colour coated 0.50mm thick pre-painted galvalume aluminium zinc coated GI based plain steel sheet, having maximum pitch of 250mm c/c and minimum 30mm crest depth in length as per site requirement, the feed material manufactured out of 0.50mm (TCT) with coating of 18-20 microns top coat over 5 microns primer and 8-10mm alkaline back of zinc aluminium alloy of AZ-150, including the sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium 55% and silicon 1.5% with total mass coating of 150 gms/sqm on both sides having covered width 1020mm and return leg for proper side lap as in roof covering/ cladding and fixed with self tapping screws with EDPM seal complete all as specified and directed. Make: TATA Durashine or equivalent as approved.

S&F mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F structural steel work with rolled mild steel sections as in joist, channel, angle or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of length indicated) and similar articles conforming to Fe-410W (Gde E-250) quality-A complete all as specified and directed.

S&F structural steel work with rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc and similar articles conforming to Fe-410W (Gde E-250) quality-A complete all as specified and directed.

S&F mild steel Expanded metal, weight not exc. 4 Kg per Sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples complete and fixed to wood or steel members complete all as specified and directed.

Taking down cement or cement lime plaster any description from walls/ceiling etc including racking out joints, hacking for key & scrubbing down with water all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 with integral water proofing compound @ 3% by weight of cement on fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed. NOTE: WPC shall be measured and paid seperately under respective item.

Supply only integral waterproofing compound complete all as specified and directed.

M&L for two coats of oil bound distemper over one coat of primer and 1mm thick layer of wall care putty on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

Complete removal of existing treatment of wall and M&L for two coats of oil bound distemper on previously treated plastered surfaces of wall over one coat of primer and 1mm thick layer of wall care putty including preparation of surfaces complete all as specified and directed.

M&L for two coats of cement base paint over one coat of primer on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

Complete removal of existing treatment of wall and M&L for two coats of cement base paint over one coat of primer on previously treated plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for three coats of white wash on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old or previously treated surfaces of wood or wood based materials of any description over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old or previously treated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection, laid in panels, finished surface even and smooth without using extra cement and forming 12mm wide expansion joints to the full depth, and filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'A' complete all as specified and directed.

M&L Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.

M&L for joint free glazed ceramic tiles, coloured, superior quality of size 450x350x7mm thick, in vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for joint free non skid ceramic tiles, coloured, superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for joint free non skid ceramic tiles, coloured, superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in vertical surfaces etc., set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L 20-25mm thick Machine cut kota stone slab flooring, machine cut and polished as in floor over and including 20mm thick rendering in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing including making moulding/ rounding to edges of stone complete all as specified and directed.

M&L 20-25mm thick Machine cut kota stone slab flooring, machine cut and polished as in vertical surfaces over and including 10mm thick rendering in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing including making moulding/rounding to edges of stone complete all as specified and directed.

M&L 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub bases of floors and pavings etc. finished even and fair without using extra cement complete all as specified and directed.

M&L for 60mm thick M-35 grade factory made machine pressed precast concrete interlocking paver block rubber moulded of any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick sand cushion and joints filled with sand complete all as specified and directed.

S&F 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floors complete all as specified and directed.

S&F 20mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. NOTE: Credit for this items shall be made as per conditions separately.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

All as per item no 53 above but for one 5 pin 5 Amp socket outlet point on an independent board.

All as per item no 53 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.

All as per item no 53 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm.

S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.

S&F Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.

S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 5/6 Amp, 230 volts complete all as specified and directed.

S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 15/16 Amp, 230 volts complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.

S&F in repair sheet metal enclosure for VTPN DB double door type, 4 way, suitable for 4 pole MCCB, 415Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCCB/ MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F in repair sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F MCB, single pole & neutral 40 to 63 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F MCCB, 63 Amp, 4 pole, 415 volts, 16 KA breaking capacity complete all as specified and directed.

S&F in repair ceiling fan regulator, electronic, rotary step up socket type, 230 volts suitable for 1200/1400 mm sweep ceiling fan including necessary connection complete all as specified and directed.

S&F in repair sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4sqmm nominal cross sectional area and one run of 4sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

S&F in repair wall mounted 20/22 W LED integrated tube light fitting, 1200mm long batten with extruded aluminium housing, frosted diffuser and integrated electronic driver with decorative end cap complete and one no 20/22 W LED 6000K, 230V, tube light complete with all required fittings and fixtures arrangement including and provn of connection from ceiling rose to luminaries with PVC 3 core flexible copper wire complete all as specified and directed. Make: Havells Endura Linear Neo cat no. BS 22WLED865SPCWH or Philips smart brite cat no. BN 021LED 22S6500/4000 PSU GR/SI or Bajaj cat no. BCLAB 20W WH LED P.

S&F in repair 1200mm long wall mounted decorative batten only suitable for 18/20 W LED tube light fitting with extruded aluminium housing, frosted diffuser, integrated electronic driver with decorative end cap complete with all required fitting arrangement including and provn of connection from ceiling rose to luminaries with PVC 3 core flexible copper wire complete all as specified and directed. Make: Havells cat no. REGAL BATTEN8UPTO1X22WDSBSWH or Eveready Easylite box cat no. INBOXFR1X18W or HPL LED Legacy cat no. HPLLEDT820(CW).

S&F in repair 1200mm long 18/20 W ultra bright crystal LED tubelight, 6000 K, 230V with high efficiency, suitable for tube light fitting with all required connection complete all as specified and directed. Make: Havells cat no. CRYSTAL 1213T8DSTL20WLED865SGLASS or Philips Essential LED Tube cat no. 20W865T8IND or equivalent in Eveready.

S&F in repair security light fitting of 24/25 W LED 6000 K, with high power LED source (more than 110 lumens/ watt), PDC housing, IP65 and IK 07 with 4KV inbuilt surge protection driver and one no. 24/25W LED tube, with all accessories, prewired with and fixed to bldg/pole including GI bracket 1.20m long bent to shape, made out of 25mm dia GI light grade pipe with nuts, bolts and washers and provn of connection from ceiling rose to luminaries with PVC 3 core flexible copper wire complete all as specified and directed. Make: Philips Green Line Smart cat no. BRP042LED25CWR1S1PSU GR or Bajaj Edge Next LED cat no. ENXT P24L WH CR PC SD or Eveready Mini Might cat no. LED SL025 157-02.

S&F in repair super bright LED (2X2) light fitting, 36 W, 6000 K recess mounting with high efficent LED source with 02 nos LED Light with all accessories, prewired and fixed in ceiling complete all as specified and directed. Make: Havells cat no. PLUTONEO2x2PLR34WLED857S or Bajaj Skylux series- Recessed cat no. BZRSQL 36W GZI WH or Philips cat no. RC380B LED30S-6500/ 4000 G4L60W60 PSU OD OC.

M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m deep below normal ground level, connected to galvanised earth lead wire 4.0mm dia (7.50m) by means of bolts, nuts, check nuts & washers of galvanised iron or steel, earth lead wire protected by 15mm dia GI pipe light grade, 20mm dia light grade GI pipe for watering, meshed funnel, alternate layer of charcoal and common salt complete all as SSR Item No. 19471 and shown in electrical plate No. 3 of SSR part-I with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way in lieu of CI pit cover and protection including necessary excavation and earth work complete all as specified and directed.

Taking down carefully ceiling fan/ exhaust fan by disconnecting all electrical connection complete all as specified and directed. NOTE: Old ceiling fan/ exhaust fan shall be deposited to E/M store yard.

S & F of ceiling fan 1200 mm sweep, BEE star rated (40-48 Watt), Min air delivery 215 CFM, copper wound motor, AC single phase, 230/240 volt, white colour complete with blades, down rod 300mm long, canopy and provn of connection with 3 core flexible copper cable of size 1.5 sqmm from ceiling rose to fan complete all as specified and directed. Make:- Havells ES 40 /Usha Technix plus/Orient energy star

S & F water heater storage type electric BEE five star rated of capacity 25 ltrs to operate on 230 volt AC, 2000 watt vertical type including 2/4 Nos full threaded fastener of size 100x10 mm with, 2 No washer, water connection with 02 Nos heavy duty PVC flexible pipe of size 15 mm, 450 mm length & suitable plug top of 16 Amp capacity complete all as specified and directed. Usha Misty/Racold CDR DLX/Bajaj Montage/Havells monja DX Note : Product must have 2 years warranty, 2 years warranty on heating element & 5 years warranty on inner tank.

M/S S S A ASSOCIATES

M/s Pratap Associates

M/s Bhadoria Associates

M/s Sachkhand Traders