Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.9 LAccepted-Finance | L1 | Accepted-Finance Accepted | |
| 2 | L2₹33.2 L+₹31,600 (0.96%)Accepted-Finance | L2 | Accepted-Finance Accepted |
Tender Value
₹26.3 L
EMD Value
₹52,650
Closing Date
20 Feb 2024, 2:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, PWD, WD-II, Diu
Executive Engineer, PWD, WD-II, Fort Road, Diu
Procurement of Electrical Materials and Rewinding of Motors etc. to Maintain, Operation and Upkeepment of Diu Water Supply Scheme in Diu District for the year 2023-2024
2024_DIUDT_3376_1
e-Tender Notice No. 71/2023-2024
Open Tender
Civil Works - Others
Works
365 days
Diu
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Executive Engineer, PWD, WD-II, Diu
₹52,650
9 Mar 2024
12 Feb 2024
20 Feb 2024
12 Feb 2024
20 Feb 2024
12 Feb 2024
Amount
Works
Providing open well horizontal mono block pump set with cast iron body, complete for three phase submersible motor having for 3 HP 3 phase open well horizontal mono block pump set suitable for 85 LPM to 270 LPM @ 11 mtr to 33 mtr head suitable for 50/65 mm dia delivery pipe Cat.II (make: Duke/ Kirloskar/ Crompton) as directed by Engineer-in-charge.
Providing open well horizontal mono block pump set with cast iron body, complete for three phase submersible motor having for 5 HP 3 phase open well horizontal mono block pump set suitable for 1350 LPM to 310 LPM @ 10 to 42 Mtr head suitable for 50/65 mm dia delivery pipe Cat.II (make: Duke/ Kirloskar/ Crompton) as directed by Engineer-in-charge.
Providing open well horizontal mono block pump set with cast iron body, complete for three phase submersible motor having for 7.5 HP 3 phase open well horizontal mono block pump set suitable for 1550 LPM to 370 LPM @ 13.5 Mtr to 42 Mtr head suitable for 65/75 mm dia delivery pipe Cat.II (make: Duke/ Kirloskar/ Crompton) as directed by Engineer-in-charge.
Providing open well horizontal mono block pump set with cast iron body, complete for three phase submersible motor having for 25 HP 3 phase open well horizontal mono block pump set suitable for 1850 LPM to 1075 LPM @ 36 to 60 MTR head suitable for 65/ 80 mm dia delivery pipe Cat.II (make: Duke/ Kirloskar/ Crompton) as directed by Engineer-in-charge.
Providing open well horizontal mono block pump set with cast iron body, complete for three phase submersible motor having for 30 HP 3 phase open well horizontal mono block pump set suitable for 2450 LPM to 1575 LPM @ 40 to 51 MTR head suitable for 80/ 100 mm dia delivery pipe Cat.II (make: Duke/ Kirloskar/ Crompton) as directed by Engineer-in-charge.
Supplying submersible pump set for bore of 150 mm. dia. or more having 3 phase motor capacity about 20 H.P and discharge capacity having (8 Stage) 1000 to 900 LPM discharge at head 59 to 64 mtrs suitable for 80mm dia. delivery pipe Cat.III (make: Kirloskar, KSB, Duke) as directed by Engineer-in-charge.
Supplying submersible pump set for bore of 200 mm. dia. or more having 3 phase motor capacity about 35 H.P discharge capacity having (6 Stage) 1600 to 1150 L.P.M. discharge at the head 72 to 102 mtrs. suitable for 100 mm dia. delivery pipe Cat.III (make: Kirloskar, KSB, Duke) as directed by Engineer-in-charge.
Providing and erecting Approved make Three pole moulded case circuit breaker having breaking capacity/strength ICU of 35 K.A. at 415 V. having normal current rating 125A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat.III as directed by Engineer-in-charge.
Providing approved make Three pole moulded case circuit breaker having breaking capacity/ strength ICU of 50 K.A. at 415V. having normal current rating up to 250A. with variable thermal & magnetic release suitable to work on A.C. supply 50 c/s. ICS = 100% of ICU only Cat.III as directed by Engineer-in-charge.
Provding approved make Three pole moulded case circuit breaker having breaking capacity/ strength ICU of 50 K.A. at 415 V having Normal current rating up to 400A. with variable Thermal & magnetic release suitable to work on A.C. supply 50 c/s. With all internal connections & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat.III as directed by Engineer-in-charge.
Supplying electrical insulation L.T. Tape role with ISI marked having nominal width 1.8 cms nominal length 9.0 mtr nominal thickness 0.125 mm and having self adhesive PVC. as directed by Engineer-in-charge.
Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. as directed by Engineer-in-charge. 16 Sq.mm.
Solderless crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/ cadmium plated nut bolts in an approved manner, as directed by Engineer-in-charge. 6 Sq.mm
Add cost of leak proof complete welding surrounding pipe and coupling for use as column pipe for following size as directed by Engineer-in-charge. 50mm, 65mm
80mm, 100mm, 125mm
Cutting the heavy duty pipe and threading one end of pipe with 8 TPI / 11 TPI as per requirement and including to and fro charges. as directed by Engineer-in-charge. 50mm (2") dia pipe
65mm (2.1/ 2") dia pipe
80mm (3") dia pipe
100mm (4") dia pipe
125mm (5") dia pipe
Providing ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable approved make of following Size as directed by Engineer-in-charge. 3 Core x 1.5 Sq. mm.
3 Core x 2.5 Sq. mm.
3 Core x 6 Sq. mm.
Making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over the run and backfilling the same and making the surface as normal ground. as directed by Engineer-in-charge.
Making trench in Hard Murrum / Tar Road of suitable width of 90 cms or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground. as directed by Engineer-in-charge.
Add if additional machineries like hammer driller or JCB use [Add] as directed by Engineer-in-charge.
Supplying & erecting funnel type earthing having earth plate of following size burred in specifically prepared earth pit 3 mtr. below ground with 40 kg. charcoal and salt with alternate layers of charcoal & salt, 20mm dia. G.I. pipe with Funnel with a wire mesh for watering & bricks masonry block, C.I. Cover complete as per para 7.3 of IS 3043 with necessary length of double Galvanised Iron/ copper earth wire No 6 SWG bolted with lug to the plate and covered in 12mm dia. G.I. pipe 2.5 mtr long complete connected to the nearest switch gear with end socket as per direction & duly tested by earth tester confirming to IS (As per drawing) with following specification With 45 x 45 x 0.35 cms. C.I. earth plate. as directed by Engineer-in-charge.
Supplying & erecting earth pit of minimum bore dia. 150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I. Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. For Electrical installation up to 11 KV in normal soil. Length of Pipe: 2.00 mtrs Back filling Compound: 1 no. Bag of 25 Kg. as directed by Engineer-in-charge.
Rewinding of Any fan by using supper enamelled copper wire and over hauling and putting in working order with original speed with guarantee for one year including credit of D.M. retained by Agency, as directed by Engineer-in-charge.
Replacing burnout unserviceable ball bearing/ roller bearing suitable for following motors for mono block pump sets for 1 H.P. motor/ Pump. as directed by Engineer-in-charge.
Opening the open well sub. mono pump set for fault finding, carry out required repairs refitting the same with necessary oiling, greasing & overhauling & making pump set in good working condition. (Excludes cost of repairing. Includes to & from transportation) as directed by Engineer-in-charge. 1 HP to 5 HP.
7.5 HP to 15 HP.
20 HP to 35 HP.
Rewinding of 230V single phase motor as per original winding design by using super enamelled copper Wire and putting the same in working condition as per original up to 0.5 HP. as directed by Engineer-in-charge.
Rewinding of 230V single phase motor as per original winding design by using super enamelled copper Wire and putting the same in working condition as per original up to 1.0 HP. as directed by Engineer-in-charge.
Rewinding of 3 H.P., 3 phase 440V motor as per original winding design by using super enamelled copper Wire and putting the same in working condition as per original. as directed by Engineer-in-charge.
Rewinding of 5 H.P., 3 phase 440V motor as per original winding design by using super enamelled copper Wire and putting the same in working condition as per original. as directed by Engineer-in-charge.
Rewinding single phase 230V motor for open well horizontal mono pump set by using polycab copper winding wire & putting the same in working order for pump capacity of 0.5 HP - 230V. as directed by Engineer-in-charge.
Rewinding single phase 230V motor for open well horizontal mono pump set by using polycab copper winding wire & putting the same in working order for pump capacity of 1 HP - 230V. as directed by Engineer-in-charge.
Replacement of Gun metal/ Bronze bushing for open well horizontal submersible pump set 7.5 HP to 15 HP. as directed by Engineer-in-charge.
Replacement of Gun metal/ Bronze bushing for open well horizontal submersible pump set above 15 HP. as directed by Engineer-in-charge.
Replacing gasket, oil, nuts, bolts & washers for open well horizontal submersible pump sets 7.5 HP to 15 HP. as directed by Engineer-in-charge.
Replacing gasket, oil, nuts, bolts & washers for open well horizontal submersible pump sets above 15 HP. as directed by Engineer-in-charge.
Replacement of Bronze/ Carbon thrust bearing with fibber plate & bushing suitable for open well horizontal submersible pump set for 7.5 HP to 15 HP. as directed by Engineer-in-charge.
Replacement of Bronze/ Carbon thrust bearing with fibber plate & bushing suitable for open well horizontal submersible pump set for above 15 HP.
Replacement of cast iron impeller for openwell horizontal submersible pump sets 7.5 HP to 15 HP. as directed by Engineer-in-charge.
Replacement of cast iron impeller for openwell horizontal submersible pump sets above 15 HP. as directed by Engineer-in-charge.
Replacement of Bronze / Gunmetal impeller for open well horizontal submersible pump set 7.5 HP to 15 HP. as directed by Engineer-in-charge.
Replacement of Bronze / Gunmetal impeller for open well horizontal submersible pump set above 15 HP. as directed by Engineer-in-charge.
Opening the submersible pump set for fault finding, carry out required repairs refitting the same with necessary oiling, greasing & overhauling & making pump set in good working condition. (Excludes cost of repairing. Includes to & from transportation) as directed by Engineer-in-charge. 1 HP to 5 HP.
7.5 HP to 15 HP.
20 HP to 35 HP.
Replacement of bronze/ carbon thrust bearing with fibre plate & housing for 150 mm dia.
Replacement of bronze/ carbon thrust bearing with fibre plate & housing for 200 mm dia.
Replacement of motor bush, upper/ lower with sleeve with following material Bronze 150mm dia.
Replacement of motor bush, upper/ lower with sleeve with following material Bronze 200mm dia.
Replacement of motor bush, upper/ lower with sleeve with following material Rubber 150mm dia.
Replacement of motor bush, upper/ lower with sleeve with following material Rubber 200mm dia.
Replacement of Bronze impeller with neck ring 150mm dia.
Replacement of Bronze impeller with neck ring 200mm dia.
Replacement of Bowl bearing/ bush Rubber 150mm dia.
Replacement of Bowl bearing/ bush Rubber 200mm dia.
Rewinding 3 phase, 440V motor for open well horizontal mono pump set by using polycap copper winding wire & putting the same in working order for pump capacity of 5 HP - 440V
Rewinding of submersible motor by using approved make PVC insulated copper winding Cores of suitable size complete with connection. Capacity Suitable for pump of following size. Dismantled Materials to be retained by agency. 5 HP.
26 to to 35 H.P.
Transformer oil having good resistance to high electrical stress, high di-electric strength (50KV) low viscosity, low pour point, high flash point and excellent thermal properties for efficient heat transfer and cooling as per I.S.335 -1972. as directed by Engineer-in-charge.
Providing XLPE (IS:7098) (I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables as directed by Engineer-in-charge. 3 1/2 core 25 Sq. mm (16 Sq. mm 1/2 core)
3 1/2 core 50 Sq. mm (25 Sq.1/2 mm core)
3 1/2 core 70 Sq. mm (35 Sq. mm 1/2 core)
3 1/2 core 120 Sq. mm (70 Sq. mm 1/2 core)
3 1/2 core 150 Sq. mm (70 Sq. mm 1/2 core)
Disconnecting the cable connection and Providing straight joint with PVC mould using heat shrink /cast resin type epoxy compound Insulating material and making the joint complete using necessary in line connectors, hardener, earth continuity connection, spacers etc. and reconnecting the same & ensure the joint resistance within the limits as per IS. as directed by Engineer-in-charge. 10 to 25 Sq. mm cable.
35 to 95 Sq. mm cable.
120 to 300 Sq. mm cable.
Providing L&T make Three Phase & Neutral LT Heavy Duty Switch Disconnector Fuse Unit Cubical type for panel mounting complete with operating mechanism suitable to operate on 415V A.C., 23A duty With HRC fuses of suitable load confirming to IS. 13947 (Part I & III). of following capacities. as directed by Engineer-in-charge. 63 Amp Cat. III
125 Amp Cat. III
250 Amp Cat. III
400 Amp Cat. III
Providing 415 V MCB three Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS: 8828 in existing box having following capacity 40 Amp. Cat. III as per approved make as directed by Engineer-in-charge.
Providing 415 V MCB three Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity 63 Amp. Cat. III as per approved make as directed by Engineer-in-charge.
Providing four pole Miniature isolator A.C. 22 duty confirms to IS 13947-3 in existing box for 40 Amp Cat. III as per approved make as directed by Engineer-in-charge.
Providing four pole Miniature isolator A.C. 22 duty confirms to IS 13947-3 in existing box for 63 Amp Cat. III as per approved make as directed by Engineer-in-charge.
Providing four pole Miniature isolator A.C. 22 duty confirms to IS 13947-3 in existing box for 100 Amp Cat. III
Providing AC-3 duty 3 pole power contactor with 2 NO & 2 NC aux contacts complete with 220V/ 240V/ 415V operating coil suitable for 70A rating (L&T make).
Providing AC-3 duty 3 pole power contactor with 2 NO & 2 NC aux contacts complete with 220V/ 240V/ 415V operating coil suitable for 95A rating (L&T make).
Providing AC-3 duty 3 pole power contactors spare kits for 70A rating (L & T make).
Providing AC-3 duty 3 pole power contactors spare kits for 80/ 95A rating (L&T make).
Providing AC-3 duty 3 pole power contactor thermal over load relay for 80 to 110 Amp. (L&T make)
Providing operating coil for power contactors for 70A/ 110A (L&T make)
Providing fresh air fan 250 mm dia with square frame make of ABS body with louvers Cat. II as per approved make as directed by Engineer-in-charge.
Supplying LED lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge protection, Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 LED Lamps integral type, with PC diffuser suitable LAMP holder 5 to 8 watts Cat. III make: Wipro, Crompton, Philips, Bajaj, Osram as directed by Engineer-in-charge.
Supplying LED lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge protection, Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 LED Lamps integral type, with PC diffuser suitable LAMP holder 16 to 20 watts Cat. III make: Wipro, Crompton, Philips, Bajaj, Osram as directed by Engineer-in-charge.
36-40 Watts, Surge- 2KV, IP-20, conventional 4 feet Cat. III (make: Wipro, Crompton, Philips, Bajaj, Osram)
Providing & Supplying of tinned type Alluminium in line connector conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected dowells make as directed by Engineer-in-charge. (incl. GST) 16 Sq.mm.
Providing & Supplying of tinned type Copper tube heavy duty in line connector conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected dowells make as directed by Engineer-in-charge. (incl. GST) 10 Sq.mm.
Providing & Supplying Phase and Voltage Controller having 3ph - 3W, 145V AC, 47 - 63 Hz, O/P: 5A (Res.) Make: GIC (L&T) as directed by the Engineer-in-charge. (inc. GST)
Providing & Supplying Angle Grinder, Type of Product: Angle Grinder, Switch Type: Back Switch, No Load Speed: 1000 rpm, Size: 125mm, Input Power: 220-240V, Wattage: 1100W, Make: JCB Model No: JCB-AG1100-EM/ Makita as directed by Engineer-in-charge. (Incl. GST)
Providing & Supplying Rotary Hammer Drill, Type of Product: Rotary Hammer, No Load Speed: 1300 rpm, Impact Energy: 2.8 J, Input Power: 240V, Wattage: 800W, Size: 26mm, Make: JCB Model No: JCB-RH800-EM/ Makita as directed by Engineer-in-charge. (Incl. GST)
Providing & Supplying Impact Drill Machine, Capacity: 13mm, 710W comes with a power supply cord of 2m, 3200 rpm., power input of 710 W., drilling capacity of 13mm in steel, 30 mm in wood and 16 mm in concrete. weight 2.1 kg make: Makita Model No. HP1630/ Woolf/ Black & Decker as directed by Engineer-In-charge. (Incl. GST)
Providing & Supplying Grinder Machine Blade for Metal cutting including all taxes, GST, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores stacking etc. complete. as directed by Engineer-in-charge. (Incl. GST)
Providing & Supplying Metal Drill Bit Set of 25 HSS High Speed Steel Drill Bit Drilling Head for Power Drill Tool (Size : 2mm to 13mm) make: JK/ Taparia/ Jhalani as directed by Engineer-In-charge. (incl. GST)
Providing & Supplying Masonary / RCC Drill Bit Set of 3mm -10 nos., 4mm-10 nos., 5mm-10 nos., 6mm-10 nos., 7mm-05 nos., for Rotary Hammer Drill make: JK/ Taparia/ Jhalani as directed by Engineer-In-charge. (incl. GST)
Providing & Supplying Grinder Machine Blade for Sanding, Rust removal & Polishing of Metal including all taxes, GST, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores stacking etc. complete. as directed by Engineer-in-charge. (incl. GST)
Providing & Supplying Single Sided HCS Hacksaw Blade, Material: Carbon Steel, Colour: Silver, Length: 12 inch long including all taxes, GST, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores stacking etc. complete. as directed by Engineer-in-charge. (incl. GST)
Providing & Supplying Water Level Controller having supply: 85-270V AC/ DC, 50/60Hz, 3VA (max.) 10A @ 250V Ac (NO) WLCA2M1 Selec make or equivalent as directed by the Engineer-in-charge. (incl. GST)
Providing & Supplying Auto Switch +, Efficiently operate Submersible, Monoset pumps, and motors, automate the whole switch ON and switch OFF process, Input supply: 415V 50Hz, Output: N-V, S1-S2 potential free, Auto ON Delay Time: 45-60 seconds (Pre-setted), Make: Gelco Model: WTF as directed by the Engineer-in-charge. (incl. GST)
Providing & Supplying Mini WLG Liquid Level Controller having Supply Voltage: 220 / 415 VAC, Output Contact Rating: 5Amp, 240 VAC, Sencing Element: SS Prod, Output Contact: 1 NO, Trip Time Delay: 4 to 7 Sec, Enclosure: PVC Box, Make: Gelco/ Ellico as directed by Engineer-in-charge. (incl. GST)
Providing & Supplying Relay unit for JMP star delta starter upto 25 HP. (incl. GST)
Providing & Supplying Black MRF (Patch) Cushion Repair Compound, Thickness: 2mm, Size: 1.5 kg as directed by the Engineer in charge. (incl. GST)
Providing & Supplying of Bitumen Cotton Tape, width: 19mm, length: 10 mtr. Standard make as directed by the Engineer in charge. (incl. GST)
Providing & Supplying M.S. Clamp having 4/5 ft. length, Width 4 inches, Thickness 10/12mm, Nut bolts 4 inches with double side washer, middle round dia 400mm as per the design and directed by the Engineer in charge. (inc. GST)
Providing & Supplying M.S. Clamp having 3/4 ft. length, Width 3 inches, Thickness 10/12mm, Nut bolts 4 inches with double side washer, middle round dia 150/ 160mm as per the design and directed by the Engineer in charge. (inc. GST)
Providing & Supplying M.S. Clamp having 2/3 ft. length, Width 3 inches, Thickness 10/12mm, Nut bolts 4 inches with double side washer, middle round dia 65/ 80/ 100mm as per the design and directed by the Engineer in charge. (inc. GST)
SUPER CONSTRUCTION
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .