Repairs of Mobile Toilets and Associated Machinery of Municipal Council Udhampur ie General Repair of 02 Nos 10 Seater Mobile Toilet Vans

Amount

Providing and fixing of new SLUDGE TANK of VAN No. 1 having Capacity 1300 litres (appx.) of water proof SS material with argon welding and buffing of size 4’-6’’ x 6’ made out of Material 2.5 mm S.S. 304. P/Fitting Sludge Drain valve 100 mm diameter heavy duty butterfly valve of SS at rear of the unit. P/F of flange system with leak proof sealing for fixing the valve, & flange fitted with tank by nut bolt arrangement, Sludge tank flushing line cleaning by jet of water. P/F of Flushing elbow at rear by which sludge can be sucked directly by suction machine. P/F of Air vent pipe for sludge tank to exhaust Foul gases, P/f of One level indicator, Sludge tank shall have slope at rear end of about 3” for easy drain. The job includes labour charges/ Tool & Tackles, welding/riveting, priming, painting and all taxes.

Repairing of SLUDGE TANK of VAN No. 2 having Capacity 1300 liters (approx.) made of SS material by way of dismantling the damaged/worn out SS sheet. P/F of new 2.5 mm S.S. 304 sheet on two sides of the tank by argon welding and buffing. P/Fitting Sludge Drain valve 100 mm diameter heavy duty butterfly valve of SS at rear of the unit. A flange system with leak proof sealing is required for fixing the valve, & flange should be fitted with tank by nut bolt arrangement. The job includes labour charges/ Tool & Tackles welding/riveting, priming, painting and all taxes.

Providing and fixing PTMT Bottle Trap of VAN No 1for Wash basin and sink, Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms.- 02 Nos., Providing and fixing PTMT 15 mm Urinal spreader of size 95x69x100 mm with ½” BSP thread and shapes, weighing not less than 60 gms – 03 No’s., Providing and fixing PTMT urinal cock of approved quality and colour of 15 mm nominal bore, 80 mm long, 42mm high and 30 mm wide with BSP female threads weighing not less than 48 gms Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of Joints of 15mm nominal outer dia pipes. - 10 Metre. The job includes labour charges/ Tool & Tackles etc.

Providing and fixing PTMT Bottle Trap VAN No 2 for Wash basin and sink, Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms.- 04 Nos., Providing and fixing PTMT 15 mm Urinal spreader of size 95x69x100 mm with ½” BSP thread and shapes, weighing not less than 60 gms – 05 No’s., Providing and fixing PTMT urinal cock of approved quality and colour of 15 mm nominal bore, 80 mm long, 42mm high and 30 mm wide with BSP female threads weighing not less than 48 gms Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of Joints of 15mm nominal outer dia pipes. - 15Metre.The job includes labour charges/ Tool & Tackles etc.

Providing and fixing PVC stop cock of VAN No1 of approved quality of 15 mm nominal bore – 05 Nos., Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats– 06 Nos., Providing and fixing UPVC connection pipe with brass unions of 30 cm length – 08 Nos., Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank of 1000 Litres Capacity – 01 No., Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin points of approved make conforming to IS : 8931– 03 Nos., Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 – 05Nos., The job includes labour charges/ Tool & Tackles etc.

Providing and fixing PVC stop cock of VAN No 2 of approved quality of 15 mm nominal bore – 04 Nos., Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats– 04Nos., Providing and fixing UPVC connection pipe with brass unions of 30 cm length – 06Nos., Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank of 1000 Litres Capacity – 01 No., Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin points of approved make conforming to IS : 8931– 03 Nos., Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 – 05Nos., The job includes labour charges/ Tool & Tackles etc.

Providing and fixing of 15 mm nominal bore C.P. stop cock (concealed) for VAN No 1 of standard design and of approved make conforming to IS : 8931– 03 Nos., Providing and laying S&S C.I. Standard specials such as tees, bends, collars tapers and caps etc, suitable for flanged jointing as per IS : 1538 Upto 300 mm dia. – 2 kg., Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour of 15 mm nominal bore, weighing not less than 32gms – 05 Nos., Providing and fitting of soap case of nominal size 100mm x 50mm – 05 Nos., Providing and fitting of SS Bib cock of nominal dia 25mm – 10 Nos., The job includes labour charges/ Tool & Tackles etc.

Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) for VAN No 2 of standard design and of approved make conforming to IS : 8931– 04 Nos., Providing and laying S&S C.I. Standard specials such as tees, bends, collars tapers and caps etc, suitable for flanged jointing as per IS : 1538 Upto 300 mm dia. – 2 kg., Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour of 15 mm nominal bore, weighing not less than 32gms – 06 Nos., Providing and fitting of soap case of nominal size 100mm x 50mm – 06 Nos., Providing and fitting of SS Bib cock of nominal dia 25mm – 12 Nos., The job includes labour charges/ Tool & Tackles etc.

Providing and fitting of SIDE PLATFORM Type Fixed platform on both the side of toilet & 3 mm Aluminum Chequered plate fitted on platform. Material shall be Made from ISMC 75x40 and 25x3 M.S. flat with side railing made from M.S. Sq. Pipe of 40x40x2 mm & 20x20x2 mm.Ladder 2 Nos. Ladder portable type with pipe handle 1 Nos. at One Side & 1 Nos. at Other side of toilet made from M.S. pipe, 3 mm Aluminum Chequered plate on platform shall be provided. The job includes labour charges/ Tool & Tackles etc. (For Both Vans)

Providing and fitting of 04 No tyre of size 7.5-16 124/120k 16PR (4 Tyre per van) for VAN No 2 in place of old tyres with rim with tube and flaps and fitting to the chassis. Job includes the cost of material, labour charges, transportation charges and all taxes applicable.

Providing and fitting of Roof top for VAN No 2 Made from 16 gauge polymer sheet and Flooring of the common area in both the block shall be having good quality anti-skid type carpet of good quality material. Structure Shall be Made from 25x25x16 gauge M.S. sq. Pipe. Inside Paneling Aluminum Composite Panel Require height should be approx. 6 ft. From floor [ 6” distance between ceiling and partition height for air circulation in all toilet compartments] Doors Inside opening type & shall be made from 18 gauge Aluminum Sheet on outside & inside paneling Aluminum Composite Panel , 25 mm thermocol shall be fitted between outside and inside sheet with heavy duty hinges, stopper & handle. Door Frame Made From 25x25x14 Gauge M. S. Square Pipe. Job includes the cost of material, labour charges, transportation charges and all taxes applicable.

Providing and fitting of Lighting arrangement Each Toilet Block / Wash Basin shall be having one power saver LED Light for each. Outside near fix platform (on each side) LED also shall be providing. Separate electric junction box for switch, MCB & wire spool for electricity connection, with necessary safety provisions. Standard IS approved switches, wires and accessories 2 Nos Exhaust Fan [Plastic Body] shall be providing at rear side of toilet. Job includes the cost of material, labour charges, transportation charges and all taxes applicable. (For Both Vans)

Providing of Paint Anticorrosive treatment – Epoxy based antirust coating from reputed manufacturer prospecting process on all MS material. Paint shall be of Superior quality to ensure long lasting structure life suitable to use under corrosive operations Two coats of anti-corrosive P.U. base primer Two coats of P.U. shade as per Instructions. Job includes the cost of material, labour charges, transportation charges and all taxes applicable. (For Both Vans)

R K ELECTRICAL MECHANICAL ENGINEERING AND FABRICATION WORKS (BID ID -2386473)