Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.4 LAccepted-AOC R O 6 PATEL NAGAR LAST MORH JAMMU | JAMMU | JAMMU AND KASHMIR | 180001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹1.5 L+₹9,650 (6.67%)Rejected-Finance HNO 480 DIGIANA GANGYAL JAMMU | L2 | Rejected-Finance Being L2 |
Tender Value
₹1.9 L
EMD Value
₹3,860
Closing Date
29 Jun 2022, 2:00 pmClosed
Executive Engineer University Works Department
Office of the Executive Engineer University Works Department University of Jammu
Repair and Renovation of Centralized faciliites in the Department of Sanskrit in connection with NAAC Accreditation of Jammu University
2022_UDJK_171992_1
eNIT 598 dated 27-05-2022
Open Tender
Civil Works
Item Rate
60 days
University of Jammu
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Executive Engineer University Works Department
₹3,860
5 Feb 2025
2 Jun 2022
30 Jun 2022
2 Jun 2022
29 Jun 2022
2 Jun 2022
Amount
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
Providing and applying white cement based putty of 1.0 mm thick (avg.) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gm/ltr., Two or more coats of approved brand and manufacture of required shade & colour complete as per manufacturer's specifications.
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter (one or more coat), of approved brand and manufacture, including applying additional coats wherever required to achieve even shade & colour.
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work (Make Asian/Nerolac)
Providing and laying in position expansion joints at roof comprising of 2" thick thermocol sheet 16 kg density over metal cradle and poly sulphide based expansion joint sealant 1½" thick and 2" width over thermocol sheet including cement mortar and again thermocol sheet of same thickness width and density and finally covered with again silicon based expansion joints of ½" thickness etc. including cost of all material and labour required complete in all respects as per drawings and requirements
Providing and fixing 1st quality ceramic glazed wall tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades size as approved by Engineer-in-Charge in skirting, risers of steps andexcept burgundy, bottle green, black of any dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 sand) and jointing with grey cement slurry @ 3.3kg per sqm including coarse pointing in white cement mixed with pigment of matching shade complete
Renewing glass panes, with putty and nails wherever necessary including raking out old putty Float glass panes of thickness 5.0 mm (weight not less than 12 Kg/sqm
Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement: 3 fine sand),including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material outside the University Campus (Cost of New tiles used (if any) excluded).
Engagement of Labour for uprooting tree/bushes/vegeatation at top and side of building and other allied works. Mazdoor
Repairs to plaster of thickness 12mm to 20 mm in patches including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish outside the University Campus. With Cement mortar 1:4 (1 cement : 4 fine sand).
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing, Rectangular Shape 453x357 mm
Providing and fixing of CP Brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore
Providing and fixing of low level PVC flushing cistern with manually controlled device (handle lever) conf. To IS: 7231 with fitting & fixtures complete (Parry ware / Hind ware /Cera) 10 Liter Capacity – White.
Providing and fixing vitreous china pedestal type (European type/ wash down type) water closet pan (Parryware / Hindware / Cera) including providing and fixing solid plastic seat with lid (white colour) and providing and fixing low level pvc flushing cistern with all manually controlled device (handle lever) confirm to Is; 7231 (Parryware /Hindware/Cera) 10 liter capacity – white in colour fitted with unplasticised PVC connection pipe 15mm nominal bore, brass end union 45 to 60 cm length, G.I. inlet connection for flush pipe connecting WC pan, C.P. brass angle valves (02 Nos) 15 mm nominal bore (Jaquar make) CP jet (heavy duty) with PVC connection pipe to be fixed with European type WC complete job. Nothing extra shall be paid
Providing and fixing of CP brass angle valve for basin mixture Geyser points/washbasins of ‘Parko/Jainco/Cera Make’ 15 mm nominal bore
Providing and fixing of of PVC waste pipe for sink or wash basin including P.V.C. waste fitting complete Semi Rigid Pipe 32/40 mm
Engagement of Labours for different works Carpenter II Class
-----------do------------ Mazdoor
M/S DALJEET SINGH
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .