Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.6 LAccepted-AOC | L1 | Accepted-AOC Being lowest bid. | |
| 2 | L2₹19.0 L+₹2.4 L (14.5%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bid. | |
| 3 | L3₹19.6 L+₹3.0 L (18.3%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bid. |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
7 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SOUTH MAMUN
GE SOUTH MAMUN PATHANKOT-145001
COMPREHENSIVE MAINT TO MD QTRS OF JCOS/ORS IN LAL TIKKU KHAD AREA UNDER AGE B/R-II OF GE (SOUTH) MAMUN
2022_MES_557300_1
GE(S)/M-41/2022-23
Open Tender
Civil Works
Item Rate
270 days
GE SOUTH MAMUN
AS PER NIT
8 documents required · 8 mandatory
₹500
GE SOUTH MAMUN
₹40,000
Yes
6 Dec 2022
12 Oct 2022
14 Nov 2022
12 Oct 2022
7 Nov 2022
26 Oct 2022
Amount
Taking down existing cement plaster at any height on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
M&L for 10mm thick rendering at any height on faces of brick work or concrete surfaces in patches in cement mortar 1:6, finished even and smooth without using extra cement including complete all as specified and directed.
M&L for 15mm thick rendering in two layers (5mm thick in CM 1:4 over 10mm thick in CM 1:6) on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, mixing and including WPC @ 200ml/bag of cement at any height, complete all as specified and directed.
M&L for 10mm thick rendering or plastering work in CM 1:3 at any height on fascia or edging of chajjas, ceiling and roof projections etc at any height/floor/story. including taking out peeled off existing plaster / concrete including roughening old concrete surface and making the line in true shape and finishing the surface without using extra cement, complete all as specified and directed.
M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distamper over a coat of chalk whitening primer,at any height complete all as specified and directed.
M&L for preparation of old plastered or unplastered surfaces of walls and applying one coat of oil bound distamper at any height complete all as specified and directed.
M&L for preparation of newly plastered surface of external wall and applying two coats of cement base paint over a coat of alkali resistant primer including curing,at any height complete all as specified and directed.
M&L for preparation of old plastered or unplastered surfaces of walls and applying one coat of cement base paint including curing, at any height complete all as specified and directed.
M&L for preparation of newly plastered surface of ceiling/roof projection and applying three coats of white wash,at any height complete all as specified and directed.
Demolition of (unreinforced) cement concrete Concrete of any descrption and any position complete all as specified and directed.
M&L for 40mm PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in floors laid in panels n. exc. 2.5 Sqm with top finished the surface even and smooth without using extra cement including glass dividing strips as per site requirement complete all as specified and directed
M&L for PCC 1:3:6, type C-1 (using 20mm graded crushed stone aggregates) as in coping, including weathering slightly rounded or chamfered angles and throating complete all as specified and directed.
M&L for PCC 1:2:4, type B-O (using 12.5mm graded crushed stone aggregates) in edging of path (interlocking paver) including weathering slightly rounded or chamfered angles and throating complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6, type C-2 (using 40mm graded crushed stone aggregates) as in plinth protection and paving laid in slope finished even and fair incl making joints at every 2.5m and at corner filled with 85/25 and sand in ratio 1:2 by weight complete all as specified and directed.
Demolition of (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition M&L for providing precast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set in CM 1:6, complete all as specified and directed.
M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
M&L for mild steel round bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for laying floor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 300mm x 450mm x 7mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including rendering 10mm thick in CM 1:4 and finished rough to receive tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 200mm x 300mm x 7mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including rendering 10mm thick in CM 1:6 and finished rough to receive tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for laying floor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Demolition of existing brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, including removal of deberies out of MoD land complete all as specified and directed.
M&L for Brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:6) complete all as specified and directed.
M&L for Brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:6) except brick complete all as specified and directed.
Demolition of existing stone slabs and tiles any description or thickness complete all as specified and directed.
M&L for machine cut kota stone slab flooring 18-20mm thick over and including 20mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in floors / cills etc, and moulding at edges if required including complete all as specified and directed.
M&L for machine cut kota stone tiles as in riser of steps / pillars / skirting / dados 18-20mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and rounding the edges of kota stone laid over and including 10mm thick rendering in CM 1:4 to recieve stone slab, complete all as specified and directed.
M&L for marble work (Green / Black marble Bhaislana Zebra) 18-20mm thick in single piece flooring and like set and jointed inneat cement slurry including pointing in epoxy grout to match marble shade, including taking down existing damage stone floor over and including 15mm thick screed in CM 1:4 . complete all as specified and directed.
M&L for marble work (Green / Black marble Bhaislana Zebra) 18-20mm thick (table rubbed and polished) as in cooking plateform, window cills, jambs, steps and like over and including 15mm thick screed in CM 1:4 including pointing with white cement (1:2) using marble dust with admixture of pigment to match the marble shade including rounding the exposed edges full round, and making hole for gas pipe, including demolition of existing stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.
M&L for rounding edges of granite stone slabs edges, in steps, cooking plateform and other similar situations, complete all as specified and directed.
S&F Rotational moulded polyethlene water storage tank of capacity 500 Litres, three layers (cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia PVC ball valve, high pressure with polythene float complete all as specified in SSR Part-1, including dismantling of existing PVC water tank of any capacity complete all as specified and directed.
S&F "as in repair" PVC ball valve, high pressure with polythene float and flynut, screwed for iron pipe or brass ferrule and fixed to 20mm bore pipe complete all as specified and directed.
Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down steel tubing 20mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.
M&L for 15mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.
M&L for 20mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.
Cutting 15/20mm existing GI tubing for alterations or additions (each cut measured) in position without taking down complete all as specified and directed.
S&F "as in repair" 15mm bore stop/angle valve, with flange cast copper alloy (ISI Marked), chromium plated screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.
S&F "as in repair" 15mm bore Brass CP mixer for hot & cold water screwed down,for iron pipe and fixed in repair complete all as specified and directed.
S&F "as in repair" 15mm bore Brass CP wall mixer for hot & cold water screwed down,for iron pipe and fixed in repair complete all as specified and directed.
S&F "as in repair" 15mm bore stop/angle valve, with flange cast copper alloy (ISI Marked), chromium plated screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.
S&F "as in repair" 15mm bore bib tap with flange, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
S&F "as in repair" Vitreous china wash basin, white flat back of size 550mm x 400mm including 32mm size CP waste coupling full thread and 32mm dia PVC waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and directed.
S&F "as in repair" chromium plated tubular towel rail, 20mm dia 'D' type, 60cm long between flanges, complete all as specified and directed.
S&F "as in repair" CP Shower rose of size 150mmx150mm with swivel arm, stainless steel/CP brass, including fixing to steel pipe or union complete all as specified and directed.
S&F "as in repair" vitreous china wash down water closet pan (pedestal pattern), white including plastic white cover closed pattern with flat bottom and mild steel chromium plated hinging device including connections to drain or outgoing pipe and to flushing pipe anti syphonage pipe etc, complete all as specified and directed.
S&F "as in repair" PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet ball valve and handle with and including brackets and PVC bend pipe 60/90cm long etc, complete all as specified and directed.
S&F "as in repair" syphonic action kit for PVC dual flushing cistern 10 litres capacity complete all as specified and directed.
S&F "as in repair" 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in walls complete all as specified and directed.
S&F "as in repair" 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in walls complete all as specified and directed.
S&F "as in repair" 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches / floors complete all as specified and directed.
S&F "as in repair" 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches / floors complete all as specified and directed.
S&F "as in repair" 75mm bore PVC (SWR) stack clamps made out of 50x5mm flat iron and 16mm dia round iron stays, including bolts and nuts complete all as specified and directed.
S&F "as in repair" 100mm bore PVC (SWR) stack clamps made out of 50x5mm flat iron and 16mm dia round iron stays, including bolts and nuts complete all as specified and directed.
S&F "as in repair" 75mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and directed.
S&F "as in repair" 110mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and directed.
S&F "as in repair" 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.
S&F "as in repair" PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.
S&F "as in repair" sink with drainage board, made of stainless steel 1mm thick, kitchen or laboratory with plugs, washers including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410mm x 330mm x 160mm including CP waste coupling and 32mm dia waste pipe including making disturbed surface to match with existing surfaces, complete all as specified and directed.
S&F "as in repair" stainless steel kitchen plate rack of size 750mmx900mm, made of stainless steel 1mm thick, fixed with plastic plugs and mild steel screws, complete all as specified and directed.
S&F "as in repair" stainless steel Grating doom 100mm dia, fixed in floors complete all as specified and directed.
S&F "as in repair" stainless steel Grating doom 100mm dia with waste hole, fixed in floors complete all as specified and directed.
S&F pre-laminated lead free factory made 18mm (+ 0.7mm) thick 100% solid WPC (wood polymer composite) sheet having high natural fibre content 25 to 30% wood colour sheets having density not less than 600Kg/cbm and should be 100% termite/water proof, fire retardant, Eco friendly, finish at all edges for making edges lipping/bending, manufactured by single layer extrusion process with excellent screw holding capacity and shore D hardness complete all as specified and directed.
S&F "as in repair" continuous (piano) hinges, mild steel, bright finish or electro galvanised 30mm width of flaps (when open), complete all as specified and directed.
S&F "as in repair" 125mm long aluminium handle, cast type, anodised complete all as specified and directed.
S&F "as in repair" 100mm size hasp and staple, aluminium anodised including bolts to hinge plate and fixed with screws.
Hacking out old broken glass (any thickness, size, quality or description) from metal frames, glazed with putty or fixed with beads / clips,complete all as specified and directed.
S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane,complete all as specified and directed.
S&F 3mm thick Figured glass, pin head type in square not exc 0.50 Sqm each pane, fixed with oil putty, complete all as specified and directed.
S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane,complete all as specified and directed.
S&F 4mm thick Figured glass, pin head type in square not exc 0.50 Sqm each pane, fixed with oil putty, complete all as specified and directed.
Taking down chowkhats or frames not exc 1.5 Sqm each with shutter (without taking off shutters from the frame), complete all as specified and directed.
Taking down chowkhats or frames exc 1.5 Sqm but not exc 4.0 Sqm each (without taking off shutters from the frame), complete all as specified and directed.
Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed.
S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed.
S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed.
S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.
S&F 35mm thick factory made wire guazed and skeleton shutters (2nd class hardwood), open rebated and prepared to receive wire cloth, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire cloth etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats at site, complete all as specified and directed.
M&L for preparation of newly wood & wooden based surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of pink primer complete all as specified and directed.
M&L for preparation of newly or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.
S&F GI wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.
S&F Solid PVC door frame of size 50mm x 47mm, made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening at site, complete all as per specifications & drawing.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site, complete all as per specifications & drawing.
S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F 150mm long extruded aluminium handle, cast type, anodised complete all as specified and directed.
S&F 100mm long butt hinges, type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.
S&F "as in repair" 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F 150mm in repair long extruded aluminium handle, cast type, anodised complete all as specified and directed.
S&F in repair 100mm long butt hinges, type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.
S&F in repair 300mm size mild steel, ordinary rat tail, rod pattern spring including roller and roller plate, complete all as specified and directed.
S&F 300mm size mild steel, ordinary rat tail, rod pattern spring including roller and roller plate, complete all as specified and directed.
S&F floor door stopper of overall length of cover plate 140mmaluminium alloy body and tongue.anodised,with hard drwan steel spring fixed in floor complete all as specified and directed.
S&F "as in repair" 25mm bore mild steel drapery rod with 1.0mm thick PVC wood grain coating including brackets and knobs, fixed on windows and doors for hanging curtains, complete all as specified and directed.
S&F "as in repair" end caps ornamental and fixed to curtain rod screwed of design/shape as approved, complete all as specified and directed.
M&L washed stone grit plaster on exterior walls in two layers, under layers, 12mm cement plaster 1:4 furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per sqm, top layer 15mm cement plaster 1:1/2:2 (1 cement : 1/2 coarse sand : 2 stone chipping 10mm normal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chipping complete all as specified and directed. Note:- Rate includes providing and making necessary arrangments for scaffolding for G+3 bldgs.
M&L forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edge of panels and finishing the groove complete all as specified and directed. Note:- Rate includes providing and making necessary arrangments for scaffolding for G+3 bldgs.
Cleaning and removing all scale and dirt etc. from water tank and from mouths of circulating pipes without disconnecting tank of capacity exc 250 Ltrs but not exc 500 Ltrs, complete all as specified and directed.
Taking down steel shutter with frame of any description exc 1.5 Sqm but not exc 4.0 Sqm each (without taking off shutters from the frame)and refixing in same opening after repair of coloumn/shutter opening etc making good complete all as specified and directed.
M&L for 10mm thick rendering on brick or concrete surfaces of sunken floor finishe even and smooth with and including water proofing liquid of make Dr.Fixit or STP @ 0.200 ltr in 50kg of cement complete all as specified and directed.
M&L for bitumen blown any grade , applied ho, two coats to concrete /plastered surfaces at the rate of 1.5 kg per sqm per coat any applying polythene film black,50micron complete for sunken floor slab and embedded in side wall covered fillet complete all as specified and directed
M&L for 25mm PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in floors laid complete all as specified and directed
M&L for plain cement concrete 1:5:10 type D-2 (using 40 mm graded crushed stone aggregate) as in sunken floors complete all as specified and directed.
M&L for coloured machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver block of any shape and size having high glossy finish confirming to IS 15658-2006 of 80mm thickness, M-40 Grade, laid dry over and including 50mm thick washed river sand as approved and dismantling existing interlocking paver block of any shape and size removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for coloured machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver block (EXCEPT PAVER BLOCK) of any shape and size having high glossy finish confirming to IS 15658-2006 of 80mm thickness, M-40 Grade, laid dry over and including 50mm thick washed river sand as approved and dismantling existing interlocking paver block of any shape and size removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
S&F in repair plastic water closet seat cover, back closed pattern with flat bottom and mild steel chromium plated or aluminiumed hinging device complete all as specified and directed.
M/S TARA CHAND CONSTRUCTION CO.
M/s Ashoka Brothers
Bidder Name
dadwal engineers
M/s Ashoka Brothers
M/S TARA CHAND CONSTRUCTION CO.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .